Au nanoparticle-enhanced surface plasmon resonance sensing of biocatalytic transformations

N-(3-Aminopropyl)-N'-methyl-4,4'-bipyridinium is coupled to tiopronin-capped Au nanoparticles (diameter ca. 2 nm) to yield methyl(aminopropyl)viologen-functionalized Au nanoparticles (MPAV(2+)-Au nanoparticles). In situ electrochemical surface plasmon resonance (SPR) measurements are used to follow the electrochemical deposition of the bipyridinium radical cation modified Au nanoparticles on an Au-coated glass surface and the reoxidation and dissolution of the bipyridinium radical cation film. The MPAV(2+)-functionalized Au nanoparticles are also employed for the amplified SPR detection of NAD(+) and NADH cofactors. By SPR monitoring the partial biocatalyzed dissolution of the bipyridinium radical cation film in the presence of diaphorase (DP) NAD(+) is detected in the concentration range of 1x10(-4) M to 2x10(-3) M. Similarly, the diaphorase-mediated formation of the bipyridinium radical cation film on the Au-coated glass surface by the reduction of the MPAV(2+)-functionalized Au nanoparticles by NADH is used for the amplified SPR detection of NADH in the concentration range of 1x10(-4) M to 1x10(-3) M.     

Highly sensitive detection of human cardiac myoglobin using a reverse sandwich immunoassay with a gold nanoparticle-enhanced surface plasmon resonance biosensor

A highly sensitive reverse sandwich immunoassay for the detection of human cardiac myoglobin (cMb) in serum was designed utilizing a gold nanoparticle (AuNP)-enhanced surface plasmon resonance (SPR) biosensor. First, a monoclonal anti-cMb antibody (Mab1) was covalently immobilized on the sensor surface. AuNPs were covalently conjugated to the second monoclonal anti-cMb antibody (Mab2) to form an immuno-gold reagent (Mab2-AuNP). The reverse sandwich immunoassay consists of two steps: (1) mixing the serum sample with Mab2-AuNP and incubation for the formation of cMb/Mab2-AuNP complexes and (2) sample injection over the sensor surface and evaluation of the Mab1/cMb/Mab2-AuNP complex formation, with the subsequent calculation of the cMb concentration in the serum. The biosensor signal was amplified approximately 30-fold compared with the direct reaction of cMb with Mab1 on the sensor surface. The limit of detection of cMb in a human blood serum sample was found to be as low as 10 pM (approx. 0.18 ng mL⁻¹), and the inter-assay coefficient of variation was less than 3%. Thus, the developed SPR-based reverse sandwich immunoassay has a sensitivity that is sufficient to measure cMb across a wide range of normal and pathological concentrations, allowing an adequate estimation of the disease severity and the monitoring of treatment.     

Sensitive spectrophotometric detection of dopamine,levodopa and adrenaline using surface plasmon resonance band of silver nanoparticles

A simple and effective procedure is proposed for spectrophotometric determination of catecholamines; Dopamine (1), L-Dopa (2) and Adrenaline (3). It was found that the reduction of Ag⁺ to silver nanoparticles (Ag-NPs) by these catecholamines in the presence of polyvinylpyrrolidone (PVP) as a stabilizing agent produced very intense surface plasmon resonance peak of Ag-NPs. The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric detection of the catecholamines. The calibration curves derived from the changes in absorbance at λ = 440 nm were linear with concentration of Dopamine, Levodopa and Adrenaline in the range of 3.2×10^?6? 2.0×10^?5 M, 1.6×10^?7 ? 1.0×10^?5 M, 1.5×10^?6? 4.0×10^?5 M, respectively. The detection limits (3σ) were 1.2×10^?6 M, 8.6 ×10^?8 M, 9.7 ×10^?7 M for the Dopamine, L-Dopa and Adrenaline, respectively. The method was applied successfully to the determination of catecholamines in Ringer’s injection serum.     

Label-free detection of cancer biomarker candidates using surface plasmon resonance imaging

In this work, we present an antibody array for the detection of cancer biomarker candidates by a surface plasmon resonance (SPR) imaging sensor with polarization contrast. Responses from the SPR imaging sensor are shown to be similar to those from a conventional spectroscopy-based SPR sensor. Antibodies are spotted onto a self-assembled monolayer (SAM) composed of oligo(ethylene glycol) (OEG)-containing alkanethiol chains. Detection of two cancer biomarker candidates, activated leukocyte cell adhesion molecule/CD 166 (ALCAM) and transgelin-2 (TAGLN2), is demonstrated. Limits of detection for ALCAM and TAGLN2 are established at 6 ng/mL and 3 ng/mL, respectively, in buffer. No cross-reactivity is observed between immobilized antibodies and nonspecific antigen. Biomarker candidates are also detected in a 10% human serum solution. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Nucleic acid sensor for M. tuberculosis detection based on surface plasmon resonance

Cysteine modified NH(2)-end peptide nucleic acid (PNA) (24-mer) probe and 5'-thiol end labeled deoxyribonucleic acid (DNA) probes specific to Mycobacterium tuberculosis have been immobilized onto BK-7 gold coated glass plates for the detection of complementary, one-base mismatch, non-complementary targets and complementary target sequence in genomic DNA of Mycobacterium tuberculosis using a surface plasmon resonance (SPR) technique. The DNA/Au and PNA/Au bio-electrodes have been characterized using contact angle, atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) techniques, respectively. It is revealed that there is a 252 millidegrees SPR angle change in the case of PNA immobilization and 205 millidegrees for DNA immobilization, indicating increased amount of immobilized PNA molecules. Hybridization studies reveal that there is no binding of the non-complementary target to DNA/Au and PNA/Au electrode. Compared to the DNA/Au bioelectrode, PNA/Au electrode has been found to be more efficient for detection of one-base mismatch sequence. The PNA/Au bioelectrode shows better detection limit (1.0 ng ml(-1)) over the DNA-Au bioelectrode (3.0 ng ml(-1)). The values of the association (k(a)) and dissociation rate constant (k(d)) for the complementary sequence in case of the PNA/Au bioelectrode have been estimated as 8.5 x 10(4) m(-1) s(-1) and 3.6 x 10(-3) s(-1), respectively.     

Sensing using localised surface plasmon resonance sensors

The bright colours of noble metal particles have attracted considerable interest since historical times, where they were used as decorative pigments in stained glass windows. More recently, the tuneable optical properties of metal nanoparticles and their addressability via spectroscopic techniques have brought them back into the forefront of fundamental and applied research fields. Much of the recent attention concerning metal nanoparticles such as gold and silver has been their use as small-volume, ultra-sensitive label-free optical sensors. Plasmonic nanoparticles act in this case as transducers that convert changes in the local refractive index into spectral shifts of the localized surface plasmon resonance (LSPR) band. This LSPR-shift assay is a general technique for measuring binding affinities and rates from any molecule that induces a change in the local refractive index around the metallic nanostructures. By attaching molecular recognition elements (chemical or biological ligands) on the nanostructures, specificity and selectivity to the analyte of interest are introduced into the nanosensor. In this review, we will discuss the different methods used to fabricate plasmonic nanosensors. A special emphasis will be given to techniques used to link plasmonic nanostructures to surfaces. While the difference between colorimetric and refractive index sensing approaches will be briefly described, the importance to distinguish between bulk refractive index (RI) sensing and molecular near-field refractive index sensing will be discussed. The recent progress made in the development of novel surface functionalization strategies together with the formation of optically and mechanically stable LSPR sensors will be highlighted.     

Rapid detection of nivalenol and deoxynivalenol in wheat using surface plasmon resonance immunoassay

A surface plasmon resonance (SPR) immunoassay using a monoclonal antibody was developed to measure nivalenol (NIV) and deoxynivalenol (DON) contamination in wheat. A highly sensitive and stable DON-immobilized sensor chip was prepared, and an SPR detection procedure was developed. The competitive inhibition assay used a monoclonal antibody that cross-reacts with NIV and DON. The half maximal inhibitory concentration (IC₅₀) values of the SPR assay were 28.8 and 14.9 ng mL⁻¹ for NIV and DON, respectively. The combined responses of NIV and DON in wheat were obtained using a simultaneous detection assay in a one-step cleanup procedure. NIV and DON were separated using a commercial DON-specific immunoaffinity column (IAC) and their responses were obtained using an independent detection assay. Spiked tests using these toxins revealed that recoveries were in the range 91.5-107% with good relative standard deviations (RSDs) (0.40-4.1%) and that detection limits were 0.1 and 0.05 mg kg⁻¹ for NIV and DON, respectively. The independent detection using IAC showed detection limits of 0.2 and 0.1 mg kg⁻¹ for NIV and DON, respectively. SPR analysis results were correlated with those obtained using a conventional LC/MS/MS method for wheat co-contaminated with NIV and DON. These results suggested that the developed SPR assay is a practical method to rapidly screen the NIV and DON co-contamination of wheat and one of a very few immunoassays to detect NIV directly.     

Rapid analysis of coumarins using surface plasmon resonance

Coumarin molecules are ubiquitous in nature. Several have come to prominence as potential clinical therapeutic candidates. The principal example is warfarin, which is a very widely prescribed anticoagulant. Other coumarin derivatives, such as aflatoxin B1, are insidious contaminants in crop-derived foodstuffs. Extreme potency is a common feature of all biochemically active coumarins and, thus reliable methods for their rapid and sensitive detection are of paramount importance. Accordingly, this review examines the current methods used in the analysis of these molecules and compares them with immunoassay-based strategies. As a case study, we report on our experiences with using coumarin-specific polyclonal, monoclonal, and recombinant antibodies in conjunction with a surface plasmon resonance-based biosensor for analysis of coumarins. We chart the assay development process and demonstrate high sensitivity and reproducibility that compares favorably with established methodologies.     

Immobilization of Escherichia coli for detection of phage T4 using surface plasmon resonance

Phage contamination is a very serious and unavoidable problem in modern fermentation industry.It is necessary to develop sensitive and rapid phage detection methods for the early detection of phage contamination.In the present work,a real-time,rapid,specific and quantitative phage T4 detection method based on surface plasmon resonance(SPR) technique has been introduced.Escherichia coli was immobilized onto the preformed MPA self-assembled monolayer(SAM) through the widely used EDC/NHS cross-linking reaction as the recognition element.The bacteria immobilization was verified efficiently through the electrochemical measurements and fluorescence microscopy observations.The specific adsorption was much stronger than the non-specific adsorption of phage T4 binding to the biosensor surface modified by E.coli,and the latter could be neglected.The detection sensitivity reached 1×10 7 PFU/mL within 10 min.Within the experimental phage concentrations,the linear correlation between the SPR response and the phage concentration was good.The results suggest that the SPR technique is a potentially powerful tool for the phage or other virus detections,as a label-free,real-time,and rapid method.     

Gold nanoparticle-enhanced surface plasmon resonance measurement with a highly sensitive quantification for human tissue inhibitor of metalloproteinases-2

Two different methods for the quantification of human tissue inhibitor of metalloproteinases-2 (TIMP-2) were developed using surface plasmon resonance (SPR) and gold nanoparticles for signal enhancement. The first method, a competitive assay, used TIMP-2 immobilized to the sensor surface and the inactive form of matrix metalloproteinase-2 (proMMP-2) (EC 3.4.24.24) adsorbed to gold nanoparticles. The sensor signals resulting from the interaction of MMP-2-gold nanoparticles with immobilized TIMP-2 were inversely proportional to the amounts of TIMP-2 of the sample. The measuring range for TIMP-2 was about 15–180 pM. The second method, a one-step sandwich assay, used proMMP-2 immobilized to the sensor surface and an anti-TIMP-2 monoclonal antibody coupled to gold nanoparticles. The lower detection limit of this assay format was 0.5 pM of TIMP-2. The binding signals were highly reproducible up to 100 pM of the inhibitor. The improvements obtained in TIMP-2 quantification over already existing tests could contribute to a better understanding and diagnosis of diseases like cancer.     

Biological sensing using transmission surface plasmon resonance spectroscopy

Ultrathin gold island films evaporated on transparent substrates offer promising transducers for chemical and biological sensing in the transmission surface plasmon resonance (T-SPR) mode. In the present work, the applicability of T-SPR-based systems to biosensing is demonstrated, using a well-established biological model system. Au island films were evaporated on polystyrene slides and modified with a biotinylated monolayer via a multistep surface reaction, the latter assisted by the good adhesion of metal islands to polystyrene. The biotin-derivatized Au island film was then used as a biological recognition surface for selective sensing of avidin binding, distinguishing between specific and nonspecific binding to the substrate. Transduction of the binding event into an optical signal was achieved by T-SPR spectroscopy, using plasmon intensity measurements, rather than wavelength change, for maximal sensitivity and convenience. T-SPR spectroscopy of Au island films is shown to be an effective tool for monitoring the binding of biological molecules to receptor layers on the Au surface and a promising approach to label-free optical biosensing.     

Molecularly imprinted polymers for highly sensitive detection of morphine using surface plasmon resonance spectroscopy

Molecular imprinting technology is applied in surface plasmon resonance spectroscopy for highly sensitive and selective detection of morphine（MO）.As SPR-based sensor of MO,the preparation of molecular imprinted polymer is as follows: methacryhc acids（MAA）,ethylene glycol dimethacrylate（EGDMA）,azodiisobutyronitrile（AIBN） were used as functional monomer,cross-linker and initiator,respectively.The experiment results showed that morphine imprinted polymer had the performance of high sensitivity and specificity,i.e.the relative signal of SPR response was proportional to the concentration of morphine in acetonitrile in the range of 10^-9mol/L to 10^-6mol/L（1 ppb-1 ppm） with LOD of 10^-10mol/L,and MO was distinguished from its analogs,such as codeine.     

Carbon-on-metal films for surface plasmon resonance detection of DNA arrays

Surface plasmon resonance (SPR) imaging affords label-free monitoring of biomolecule interactions in an array format. A surface plasmon conducting metal thin film is required for SPR measurements. Gold thin films are traditionally used in SPR experiments as they are readily functionalized with thiol-containing molecules through formation of a gold-sulfur bond. The lability of this gold-thiol linkage upon exposure to oxidizing conditions and ultraviolet light renders these surfaces incompatible with light-directed synthetic methods for fabricating DNA arrays. It is shown here that applying a thin carbon overlayer to the gold surface yields a chemically robust substrate that permits light-directed synthesis and also supports surface plasmons. DNA arrays fabricated on these carbon-metal substrates are used to analyze two classes of biomolecular interactions: DNA-DNA and DNA-protein. This new strategy allows the combinatorial study of binding interactions directly from native, unmodified biomolecules of interest and offers the possibility of discovering new ligands in complex mixtures such as cell lysates.     

Chemically immobilized T4-bacteriophage for specific Escherichia coli detection using surface plasmon resonance

A bioassay platform using T4 bacteriophage (T4) as the specific receptor and surface plasmon resonance (SPR) as the transduction technique has been developed for the detection of Escherichia coli K12 bacteria. The T4 phages have been covalently immobilized onto gold surfaces using a self-assembled monolayer of dithiobis(succinimidyl propionate) (DTSP). Substrates of BSA/EA-T4/DTSP/Au prepared using different T4 phage concentrations have been characterized using scanning electron microscopy (SEM). The studies reveal that the use of DTSP results in a uniform binding of T4 phages onto the surface. The SPR analysis demonstrates that these BSA/EA-T4/DTSP/Au interfaces can detect the E. coli K12 with high specificity against non-host E. coli NP10 and NP30. Results of SEM and SPR studies indicate that the maximum host bacterial capture is obtained when 1.5 × 10(11) pfu ml(-1) concentration of T4 phages was used for immobilization. The surface of these chemically anchored phage substrates can be regenerated for repeated detection of E. coli K12 and can be used for detection in 7 × 10(2) to 7 × 10(8) cfu ml(-1) range. The results of these studies have implications for the development of online bioassays for the detection of various food and water borne pathogens using the inherent selectivity of bacteriophage recognition.     

Development of an X-ray detector using surface plasmon resonance

A new X-ray detector using surface plasmon resonance (SPR) is proposed. The detector consists of a prism coated with a thin metal film and semiconductor film. Optical laser pulse induces SPR condition on the metal surface, and synchronized X-ray pulse which is absorbed into the semiconductor film can be detected by measuring the change of the resonance condition of the surface plasmon. The expected time and spatial resolution of this detector is better than that of conventional X-ray detectors by combining this SPR measurement with ultra-short laser pulse as the probe beam. Our preliminary investigation using Au and ZnSe coated prism implies this scheme works well as the detector for the ultra-short X-ray pulse.     

Real-time immunoassay of ferritin using surface plasmon resonance biosensor

A surface plasmon resonance (SPR) biosensor was used for the first time to determine the concentration of ferritin in both HBS-EP buffer and serum. The monoclonal antibody was immobilized on the carboxymethyl dextran-modified gold surface by an amine coupling method. The interaction of antibody with antigen was monitored in real-time. The signal was enhanced by sandwich amplification strategy to improve the sensitivity and specificity of the immunoassay, especially in serum. The linear range of the assay in serum is over 30-200 ng ml⁻¹ with the detection limit of 28 ng ml⁻¹. The sensitivity, specificity, and reproducibility of the assay are satisfactory. The analyte and enhancement antibody-binding surface could be regenerated by pH 2.0 glycine-HCl buffer and the same antibody-immobilized surface could be used for more than 50 cycles of ferritin binding and regeneration.     

A low-cost surface plasmon resonance instrument based on detection of resonance excitation wavelength

A laboratory-made surface plasmon resonance (SPR) instrument based on the detection of resonance excitation wavelength has been successfully fabricated. The performance and workability of the SPR instrument was demonstrated as a DNA biosensor. Biotinylated single-stranded oligonucleotides (ssDNA) were chemically immobilized on a gold-film surface of the SPR instrument as a DNA probe for the detection of its fully complementary, half-complementary and non-complementary ssDNA. The immobilization of the ssDNA probe was done by avidin-biotin linkage. The ssDNA used were 12-mer oligonucleotides. The sensing mechanism was based on the shift in resonance wavelength of an excitation light beam as the target ssDNA hybridized with the ssDNA on the gold-film surface. The linear dynamic ranges of the DNA biosensor for fully complementary and half-complementary ssDNA are 0.04-1.2 pM and 0.08-1.1 pM, respectively. The DNA biosensor showed higher sensitivity to fully complementary ssDNA than to half-complementary ssDNA. But no shift of resonance wavelength to the non-complementary ssDNA was observed.     

Detection of lectin-glycan interaction using high resolution surface plasmon resonance

We report the real-time and label-free detection of direct disaccharide binding to a lectin using a differential surface plasmon resonance detection method that allows for measurement of nanomolar concentrations of disaccharides.     

Sensitive and real-time fiber-optic-based surface plasmon resonance sensors for myoglobin and cardiac troponin I

A sensor to detect markers of cardiac muscle cell death at less than 3 ng ml⁻¹ and in less than 10 min has been achieved. This fiber-optic-based surface plasmon resonance (SPR) sensor is being applied to detect myoglobin (MG) and cardiac troponin I (cTnI) in HEPES buffered saline solution. An in vivo sensor for the early detection of the onset of myocardial infarction (MI) will greatly enhance the patient care. MG and cTnI are two biological markers released from dying cardiac muscle cells during an MI, and their detection at biologically-relevant levels can be diagnostic of MI. Antibodies specific to an antigen of interest are attached to a carboxymethylated dextran layer on a gold SPR surface. With the method developed, the lower limit of detection (LOD) for MG is 2.9 ng ml⁻¹ at 25 °C. The biological level for MG reaches 15-30 ng ml⁻¹ in patient blood after myocardial damage. A Langmuir adsorption isotherm describes the binding well. For cTnI, a lower detection limit of 1.4 ng ml⁻¹ was achieved in preliminary tests. cTnI levels are in the range of 1-3 ng ml⁻¹ in patient blood after myocardial damage. The antibody reaction with the carboxymethylated dextran surface was optimized by modifying the reaction pH, the temperature, and the dextran chain length.