Influence of crosslinker identity and position on gas-phase dissociation of lys-lys crosslinked peptides

A systematic study of the dissociation patterns of crosslinked peptides analyzed by tandem mass spectrometry is reported. A series of 11-mer peptides was designed around either a polyalanine or polyglycine scaffold with arginine at the C terminus. One or two lysine residues were included at various locations within the peptides to effect inter- or intra-molecular crosslinking, respectively. Crosslinked species were generated with four commonly used amine-specific chemical crosslinking reagents: disuccinimidyl suberate (DSS), disuccinimidyl tartarate (DST), dithiobis(succinimidylpropionate) (DSP), and disuccinimidyl glutarate (DSG). The influence of precursor charge state, location of crosslink, and specific crosslinking reagent on the MS/MS dissociation pattern was examined. Observed trends in the dissociation patterns obtained for these species will allow for improvements to software used in the automated interpretation of crosslinked peptide MS/MS data.     

A top down approach to protein structural studies using chemical cross-linking and Fourier transform mass spectrometry

Mass spectrometric analysis of wild-type proteins that have been covalently modified by bifunctional cross-linking reagents and then digested proteolytically can be used to obtain low-resolution distance constraints, which can be useful for protein structure determination. Limitations of this approach include time-consuming separation steps, such as the separation of internally cross-linked protein monomers from covalent dimers, and a susceptibility to artifacts due to low levels of natural and man-made peptide modifications that can be mistaken for cross-linked species. The results presented here show that when a crude cross-linked protein mixture is injected into an electrospray ionization Fourier transform mass spectrometry (ESI-FTMS) instrument, the cross-link positions can be localized by fragmentation and mass spectrometry on the 'gas-phase purified' singly internally cross-linked monomer. Our results show that reaction of ubiquitin with the homobifunctional lysine-lysine cross-linking reagent dissuccinimidyl suberate (DSS) resulted in two cross-links consistent with the known ubiquitin tertiary structure (K6-K11 and K48-K63). Because no protein or peptide chemistry steps are needed, other than the initial cross-linking, this new top down approach appears well suited for high-throughput experiments with multiple cross-linkers and reaction conditions. Published in 2002 by John Wiley & Sons, Ltd.     

Chemical cross‐linking with NHS esters: a systematic study on amino acid reactivities

Structure elucidation of tertiary or quaternary protein structures by chemical cross‐linking and mass spectrometry (MS) has recently gained importance. To locate the cross‐linker modification, dedicated software is applied to analyze the mass or tandem mass spectra (MS/MS). Such software requires information on target amino acids to limit the data analysis time. The most commonly used homobifunctional N‐hydroxy succinimide (NHS) esters are often described as reactive exclusively towards primary amines, although side reactions with tyrosine and serine have been reported. Our goal was to systematically study the reactivity of NHS esters and derive some general rules for their attack of nucleophilic amino acid side chains in peptides. We therefore studied the cross‐linking reactions of synthesized and commercial model peptides with disuccinimidyl suberate (DSS). The first reaction site in all cases was expectedly the α‐NH₂‐group of the N‐terminus or the ε‐NH₂‐group of lysine. As soon as additional cross‐linkers were attached or loops were formed, other amino acids were also involved in the reaction. In addition to the primary amino groups, serine, threonine and tyrosine showed significant reactivity due to the effect of neighboring amino acids by intermediate or permanent Type‐1 cross‐link formation. The reactivity is highly dependent on the pH and on adjacent amino acids. Copyright © 2009 John Wiley & Sons, Ltd.     

A top-down method for the determination of residue-specific solvent accessibility in proteins

We present a method employing top-down Fourier transform mass spectrometry (FTMS) for the rapid profiling of amino acid side-chain reactivity. The reactivity of side-chain groups can be used to infer residue-specific solvent accessibility and can also be used in the same way as H/D exchange reactions to probe protein structure and interactions. We probed the reactivity of the N-terminal and epsilon-lysine amino groups of ubiquitin by reaction with N-hydroxysuccinimidyl acetate (NHSAc), which specifically acetylates primary amines. Using a hybrid Q-FTMS instrument, we observed several series of multiply acetylated ubiquitin ions that varied with the NHSAc:protein stoichiometry. We isolated and fragmented each member of the series of acetylated ubiquitin ions in the front end of the instrument and measured the fragment ion masses in the FTMS analyzer cell to determine which residue positions were modified. As we increased the NHSAc:protein stoichiometric ratio, identification of the fragments from native protein and protein with successively increasing modification allowed the assignment of the complete order of reactivity of the primary amino groups in ubiquitin (Met 1 approximately Lys 6 approximately Lys 48 approximately Lys 63>Lys 33>Lys 11>Lys 27, Lys 29). These results are in excellent agreement with the reactivity expected from other studies and predicted from the known crystal structure of ubiquitin. The top-down approach eliminates the need for proteolytic digestion, high-performance liquid chromatographic separations and all other chemical steps except the labeling reaction, making it rapid and amenable to automation using small quantities of protein.     

Probing three-dimensional structure of bovine serum albumin by chemical cross-linking and mass spectrometry

Serum albumin is the principal transporter of fatty acids that are otherwise insoluble in circulating plasma. While the crystal structure of human serum albumin (HSA) as well as its binding with fatty acids has been characterized, the three dimensional structure of bovine serum albumin (BSA) has not been determined although both albumins share 76% sequence homology. In this study we used mass spectrometry coupled with chemical cross-linking, to probe the tertiary structure of BSA. BSA was modified with lysine specific cross-linkers, bis(sulfosuccinimidyl) suberate (BS(3)), disuccinimidyl suberate (DSS) or disuccinimidyl glutarate (DSG), digested with trypsin and analyzed by tandem mass spectrometry. With O-18 labeling during the digestion, through-space cross-linked peptides were readily identified in mass spectra by a characteristic 8 Da shift. From the cross-linked peptides identified in this study, we found that 12 pairs of lysine residues were separated within 20 A, while 5 pairs were spaced between 20 and 24 A. The spatial distance constraints generated from five K-K pairs in BSA were consistent with the corresponding distance obtained from the crystal structure of HSA, although only six equivalent K-K pairs could be compared. According to our data, the distance between K235 of IIA and K374 of IIB domain in BSA was farther by 7-11 A than that expected from the crystal structure of HSA, suggesting structural differences between BSA and HSA in this region. The distance constraints obtained for lysine residues using various cross-linkers should be valuable in assisting the determination of the 3-D structure of BSA.     

Enantioselective potential response of a human serum albumin-modified ITO electrode for tryptophan

The present study aims at extending the possibility of utilizing bulky molecules such as proteins for fabricating electrochemical chiral sensors using an indium tin oxide (ITO) electrode. Enantioselective potential response of the human serum albumin (HSA)-modified ITO electrode was observed for tryptophan (Trp) when HSA was immobilized on an ITO electrode surface modified with disuccinimidyl suberate (DSS). In this sensing system, the enantioselective interaction between HSA and Trp is detected through the chemically reactive DSS group immobilized on the ITO electrode.     

Electrospray low energy CID and MALDI PSD fragmentations of protonated sulfinamide cross-linked peptides

Murine S100A8 (A8) is a major cytoplasmic neutrophil protein and is converted to novel oxidation products containing Cys-epsilon amino-Lys sulfinamide cross-links and Met-sulfoxide by the neutrophil oxidant HOCl. Seven products were separated using RP-HPLC, with electrospray ionization mass spectrometry (ESI-MS) masses after deconvolution of 10,354, 10,388, +/- 1, and 20,707, +/- 3 Da, and all were resistant to reduction by dithiothreitol. The major products with masses of 10,354 Da contained Cys41-Lys34/35 intramolecular cross-links. Additional isomeric products with identical masses (10,354 Da) were isolated and peptide mapping and ESI/MS indicated that Cys41 forms covalent sulfinamide cross-links with either Lys6, Lys76, Lys83, or Lys87 present in A8. Electrospray low energy collisionally induced (CID) spectra of multiply-charged AspN digest peptides with sulfinamide cross-links contained characteristic fragmentations that corresponded to simple cleavage of the nitrogen-sulfur bond with charge retention on either of the fragment ions, allowing conformation of cross-linked peptides. Matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) post source decay spectra of [M + H] + ions of the same sulfinamide-containing cross-linked peptides fragment similarly, but additional facile fragmentation reactions corresponding to formation of a protonated peptide containing de-hydroalanine were attributed to cleavage of the carbon-sulfur bond. In addition, lose of methanesulfenic acid from Met-sulfoxide was observed. A sulfinamide-containing adduct was isolated after incubation of the A8/HOCl reaction mixture with Lys or alpha N-acetyl Lys with masses of 10,500 or 10,542 Da. ESI/MS/MS and MALDI/post decay source (PSD) analysis of A8(32)-(57)-sulfinamide showed the same characteristic fragmentations as those in the sulfinamide cross-linked peptides, confirming the Cys41-Lys sulfinamide cross-link and suggesting that peptide-peptide sulfinamides may all fragment similarly, allowing ready identification of these cross-links in proteins from more complex biological materials.     

Well-defined liquid crystal gels from telechelic polymers

Well-defined liquid crystal networks with controlled molecular weight between cross-links and cross-link functionality were prepared by "click" cross-linking of telechelic polymers produced by ring-opening metathesis polymerization (ROMP). The networks readily swell in a small molecule liquid crystal, 5CB, to form LC gels with high swelling ratios. These gels exhibit fast, reversible, and low-threshold optic switching under applied electric fields when they are unconstrained between electrodes. For a given electric field, the LC gels prepared from shorter telechelic polymers showed a reduced degree of switching than their counterparts made from longer polymer strands. The reported approach provides control over important parameters for LC networks, such as the length of the network strands between cross-links, cross-linker functionality, and mesogen density. Therefore, it allows a detailed study of relationships between molecular structure and macroscopic properties of these scientifically and technologically interesting networks.     

Mannose‐BSA Conjugates: Comparison Between Commercially Available Linkers in Reactivity and Bioactivity

Mannosyl ethanolamine and BSA were conjugated together by their amino groups with various homobifunctional cross‐linker reagents: disuccinimidyl carbonate (DSC), disuccinimidyl glutarate (DSG), disuccinimidyl suberate (DSS), ethylene glycolbis(succinimidylsuccinate) (EGS), 1,5‐difluoro‐2,4‐dinitrobenzene (DFDNB), diethyl squarate (DES), and thiophosgene (TP). The resulting mannose-BSA conjugates were subjected to an enzyme‐linked lectin assay (ELLA)to investigate their affinity to concanvalin A (ConA). With these results, the seven linkers were evaluated on the basis of five criteria, i.e., cost, reactivity, sugar loading, homogeneity, and affinity to ConA. Thus, DSS, DFDNB, and DES seemed to have advantages over the other cross-linking reagents.     

DNA interchain cross-links formed by acrolein and crotonaldehyde

Acrolein and higher alpha,beta-unsaturated aldehydes are bifunctional genotoxins. The deoxyguanosine adduct of acrolein, 3-(2-deoxy-beta-d-erythro-pentofuranosyl)-5,6,7,8-tetrahydro-8-hydroxypyrimido[1,2-a]purin-10(3H)-one (8-hydroxy-1,N(2)-propanodeoxyguanosine, 2a), is a major DNA adduct formed by acrolein. The potential for oligodeoxynucleotide duplexes containing 2a to form interchain cross-links was evaluated by HPLC, CZE, MALDI-TOF, and melting phenomena. Interchain cross-links represent one of the most serious types of damage in DNA since they are absolute blocks to replication. In oligodeoxynucleotides containing the sequence 5'-dC-2a, cross-linking occurred in a slow, reversible manner to the extent of approximately 50%. Enzymatic digestion to form 3-(2-deoxy-beta-d-erythro-pentofuranosyl)-5,6,7,8-tetrahydro-8-(N(2)-2'-deoxyguanosinyl)pyrimido[1,2-a]purin-10(3H)one (5a) and reduction with NaCNBH(3) followed by enzymatic digestion to give 1,3-bis(2'-deoxyguanosin-N(2)-yl)propane (6a) established that cross-linking had occurred with the exocyclic amino group of deoxyguanosine. It is concluded that the cross-link is a mixture of imine and carbinolamine structures. With oligodeoxynucleotide duplexes containing the sequence 5'-2a-dC, cross-links were not detected by the techniques enumerated above. In addition, (15)N-(1)H HSQC and HSQC-filtered NOESY spectra carried out with a duplex having (15)N-labeling of the target amino group established unambiguously that a carbinolamine cross-link was not formed. The potential for interchain cross-link formation by the analogous crotonaldehyde adduct (2b) was evaluated in a 5'-dC-2b sequence. Cross-link formation was strongly dependent on the configuration of the methyl group at C6 of 2b. The 6R diastereomer of 2b formed a cross-link to the extent of 38%, whereas the 6S diastereomer cross-linked only 5%.     

Strategy for selective chemical cross-linking of tyrosine and lysine residues

Chemical cross-linking of proteins combined with mass spectral analysis is a powerful technique that can be utilized to yield protein structural information, such as the spatial arrangement of multi-protein complexes or the folding of monomeric proteins. The succinimidyl ester cross-linking reagents are commonly used to cross-link primary amine-containing amino acids (N-terminus and lysine). However, in this study they were used to react with tyrosines as well, which allowed for the formation of cross-links between two primary amines, one primary amine and one tyrosine, or two tyrosines. This result is extremely important to the chemical cross-linking community for two reasons: (1) all possible cross-linked residues must be considered when analyzing data from these experiments to generate correct distance constraints and structural information, and (2) utilizing the versatility of these cross-linking reagents allows more information content to be generated from a single cross-linking reagent, which may increase the number of cross-links obtained in the experiment. Herein, we study the reactivity of the succinimidyl ester labeling and cross-linking reagents with angiotensin I and oxidized insulin beta-chain. Using the succinimidyl acetate labeling reagent, the reactivity of the N-terminus was found to be greater than either lysine or tyrosine. However, a selectivity of the cross-linking reagent was observed for either tyrosine or lysine depending on the pH of the reaction solution. In acidic pH, it was observed that tyrosine was more reactive, while in alkaline pH lysine was more reactive. Exploiting this selectivity predominantly N-terminus-tyrosine or tyrosine-tyrosine cross-links were favored at acidic pH, while N-terminus-tyrosine or tyrosine-lysine cross-links were favored at alkaline pH.     

Simulation of the mechanical unfolding of ubiquitin: probing different unfolding reaction coordinates by changing the pulling geometry

Motivated by the recent experimental atomic force microscopy (AFM) measurements of the mechanical unfolding of proteins pulled in different directions [D. J. Brockwell et al., Nat. Struct. Biol. 10, 731 (2003); M. Carrion-Vazquez et al., ibid 10, 738 (2003)] we have computed the unfolding free energy profiles for the ubiquitin domain when it is stretched between its (A) N and C termini, (B) Lys48 and C terminus, (C) Lys11 and C terminus, and (D) N terminus and Lys63. Our results for cases (A) and (B) are in good agreement with the experimental unfolding forces measured for the N-C and Lys48-C linked polyubiquitin, in particular, indicating a considerably lower unfolding force in the latter case. Mechanical unfolding in case (A) involves longitudinal shearing of the terminal parallel strands while in case (C) the same strands are "unzipped" by the force. The computed unfolding forces in case (C) are found to be very low, less than 50 pN for pulling rates typical of AFM experiments. The unfolding free energy barrier found in case (C) is approximately 13 kcal/mol, which corresponds to a zero-force unfolding rate constant that is comparable to the rate of chemical unfolding extrapolated to zero denaturant concentration. The unfolding barrier calculated in case (A) in the limit of zero force is much higher, suggesting that mechanical unfolding in this case follows a pathway that is different from that of thermal/chemical denaturation.     

Impact of proline and aspartic acid residues on the dissociation of intermolecularly crosslinked peptides

The dissociation of intermolecularly crosslinked peptides was evaluated for a series of peptides with proline or aspartic acid residues positioned adjacent to the crosslinking sites (lysine residues). The peptides were crosslinked with either disuccinimidyl suberate (DSS) or disuccinimidyl L-tartrate (DST), and the influence of proline and aspartic acid residues on the fragmentation patterns were investigated for precursor ions with and without a mobile proton. Collisionally activated dissociation (CAD) spectra of aspartic acid-containing crosslinked peptide ions, doubly-charged with both protons sequestered, were dominated by cleavage C-terminal to the Asp residue, similar to that of unmodified peptides. The proline-containing crosslinked peptides exhibited a high degree of internal ion formation, with the resulting product ions having an N-terminal proline residue. Upon dissociation of the doubly-charged crosslinked peptides, twenty to fifty percent of the fragment ion abundance was accounted for by multiple cleavage products. Crosslinked peptides possessing a mobile proton yielded almost a full series of b- and y-type fragment ions, with only proline-directed fragments still observed at high abundances. Interestingly, the crosslinked peptides exhibited a tendency to dissociate at the amide bond C-terminal to the crosslinked lysine residue, relative to the N-terminal side. One could envision updating computer algorithms to include these crosslinker specific product ions--particularly for precursor ions with localized protons--that provide complementary and confirmatory information, to offer more confident identification of both the crosslinked peptides and the location of the crosslink, as well as affording predictive guidelines for interpretation of the product-ion spectra of crosslinked peptides.     

Differentiation of Compact and Extended Conformations of Di-Ubiquitin Conjugates with Lysine-Specific Isopeptide Linkages by Ion Mobility-Mass Spectrometry

Modification of ubiquitin, a key cellular regulatory polypeptide of 76 amino acids, to polyubiquitin conjugates by lysine-specific isopeptide linkage at one of its seven lysine residues has been recognized as a central pathway determining its biochemical properties and cellular functions. Structural details and differences of distinct lysine-isopeptidyl ubiquitin conjugates that reflect their different functions and reactivities, however, are only partially understood. Ion mobility spectrometry (IMS) combined with mass spectrometry (MS) has recently emerged as a powerful tool for probing conformations and topology involved in protein interactions by an electric field-driven separation of polypeptide ions through a drift gas. Here we report the conformational characterization and differentiation of Lys63- and Lys48-linked ubiquitin conjugates by IMS–MS. Lys63- and Lys48-linked di-ubiquitin conjugates were prepared by recombinant bacterial expression and by chemical synthesis using a specific chemical ligation strategy, and characterized by high-resolution Fourier transform ion cyclotron resonance mass spectrometry, circular dichroism spectroscopy, and molecular modeling. IMS–MS was found to be an effective tool for the identification of structural differences of ubiquitin complexes in the gas phase. The comparison of collision cross-sections of Lys63- and Lys48-linked di-ubiquitin conjugates showed a more elongated conformation of Lys63-linked di-ubiquitin. In contrast, the Lys48-linked di-ubiquitin conjugate showed a more compact conformation. The IMS-MS results are consistent with published structural data and a comparative molecular modeling study of the Lys63- and Lys48-linked conjugates. The results presented here suggest IMS techniques can provide information that complements MS measurements in differentiating higher-order polyubiquitins and other isomeric protein linkages.     

Preparation and properties of novel hydrogels from oxidized konjac glucomannan cross-linked chitosan for in vitro drug delivery

In this paper, a novel composite hydrogel was prepared by the use of dialdehyde konjac glucomannan (DAK) as macromolecular cross-linking agent for chitosan (CS). This biocompatible material cross-links and gels in minutes. The structure and morphology were characterized by various analyses. The results indicate that the hydrogels formed through the Schiff-base reaction between the amino groups of CS chains and the aldehyde groups of DAK. The cross-link density (rho(x)) increases with the enhancement of DAK content in hydrogels, while equilibrium swelling ratio (SR) and the average molecular weight between cross-links (Mc) value decrease. Drug release was evaluated by varying the pH of the release medium, reversed dependence of release rate on the equilibrium SR of hydrogel indicated that drug release may be impeded by the association of drug with the polymer. Importantly, this process offers an entirely new window of materials preparation when compared with the traditional preparation of CS-based hydrogels with small molecules cross-linking agent.     

Reversible Inter- and Intra-Microgel Cross-Linking using Disulfides

Thermoresponsive hydrogel nanoparticles composed of poly(N-isopropylmethacrylamide) (pNIPMAm) and the disulfide-based cross-linker N,N'-bis(acryloyl)cystamine (BAC) have been prepared using a redox-initiated, aqueous precipitation polymerization approach, leading to improved stability of the disulfide bond compared to traditional thermally-initiated methods. The resultant particles demonstrate complete erosion in response to reducing conditions or thiol competition. This stands in contrast to the behavior of thermally-initiated particles, which retain a cross-linked network following disulfide cleavage due to uncontrolled chain-branching and self-cross-linking side reactions. The synthetic strategy has also been combined with the non-degradable cross-linker N,N-methylenebisacrylamide (BIS) to generate "co-cross-linked" pNIPMAm-BAC-BIS microgels. These particles are redox-responsive, swell upon BAC cross-link scission and present reactive thiols. This pendant thiol functionality was demonstrated to be useful for conjugation of thiol-reactive probes and in reversible network formation by assembling particles cross-linked by disulfide linkages.     

MODIFICATION OF ε-AMINO GROUP OF LYSINES, CHOLESTEROL OXIDATION AND OXIDIZED LIPID-APOPROTEIN CROSS-LINK FORMATION BY PORPHYRIN-PHOTOSENSITIZED OXIDATION OF HUMAN LOW DENSITY LIPOPROTEINS

Abstract— When incorporated into LDL, protoporphyrin and the porphyrin mixture constituting the trade mark Photofrin II photosensitize peroxidations of cholesterol and lipids. Not only 5a-hydroperoxicholesterol, the specific product of cholesterol oxidation by ¹O₂ but also the epimeric 6-hydroperoxicholesterols are produced as shown by HPLC. In addition to malonaldehyde-like substances, the formation of 4-hydroxynonenal, a highly reactive and toxic aldehyde resulting from lipid peroxide breakdown is detected. These products are also formed by dark radical chain reactions of lipid photoperoxides induced by photosensitization. The involvement of lipid photoperoxidation in LDL apoprotein modification is demonstrated by following the derivatization of e-NH₂ groups of Lys residues which are necessary to binding to the LDL receptor. As a result, photosensitized LDL cannot bind to their receptors on fibroblasts. Lys residues are not sensitive to direct photodynamic reaction as confirmed by delipidation of LDL and solubilization of apoLDL in 1% SDS which totally inhibit Lys derivatization without affecting the degradation of Trp residues susceptible to the photodynamic attack. Another consequence of lipid peroxidation at the protein level is the formation of cross-links between apoLDL and photooxidized lipids as shown using LDL loaded with radioactive arachidonic acid. On the other hand, cholesterol photoperoxidation does not lead to protein-oxidized cholesterol cross-links. These reactions between peroxidized lipids and LDL proteins are also responsible for the formation of lipofuscin-like fluorescent pigments encountered in all aging processes. The biological and biomedical consequences of these results are discussed.     

Mispair-aligned N3T-alkyl-N3T interstrand cross-linked DNA: synthesis and characterization of duplexes with interstrand cross-links of variable lengths

Therapeutic bifunctional alkylating agents generate interstrand cross-links in duplex DNA. As part of our continuing studies on DNA duplexes that contain alkyl interstrand cross-links, we have synthesized a cross-link that bridges the N(3) positions of a mismatched thymidine base pair. This cross-link, which is similar to the N(3)C-alkyl-N(3)C cross-link that has been observed between mismatched cytosine base pairs, was introduced by first incorporating a cross-linked phosphoramidite unit at the 5'-end of an oligonucleotide chain. Fully cross-linked duplexes were then synthesized using an orthogonal approach to selectively remove protecting groups, thus allowing construction of the cross-linked duplex via conventional solid-phase oligonucleotide synthesis. Short DNA duplexes with alkyl cross-links of various lengths (two, four, and seven methylene units) were prepared, and their physical properties were studied via UV thermal denaturation and circular dichroism spectroscopy. These linkers were found to stabilize the duplexes by 37, 31, and 16 degrees C for the two-, four-, and seven-carbon linkers, respectively, relative to a non-cross-linked duplex. Circular dichroism spectra suggested that these lesions induce very little deviation in the global structure relative to the non-cross-linked duplex DNA control. Molecular models show that the two-carbon cross-link spans the distance between the N(3) atoms of the T-T mismatch without perturbing the helix structure, whereas the longer linkers, particularly the seven-carbon linker, tend to push the thymines apart, creating a local distortion. This perturbation may account for the lower thermal stability of the seven-carbon versus two-carbon cross-linked duplex.     

Triple-Shape Memory Polymers Based on Self-Complementary Hydrogen Bonding

Triple shape memory polymers (TSMPs) are a growing subset of a class of smart materials known as shape memory polymers, which are capable of changing shape and stiffness in response to a stimulus. A TSMP can change shapes twice and can fix two metastable shapes in addition to its permanent shape. In this work, a novel TSMP system comprised of both permanent covalent cross-links and supramolecular hydrogen bonding cross-links has been synthesized via a one-pot method. Triple shape properties arise from the combination of the glass transition of (meth)acrylate copolymers and the dissociation of self-complementary hydrogen bonding moieties, enabling broad and independent control of both glass transition temperature (T(g)) and cross-link density. Specifically, ureidopyrimidone methacrylate and a novel monomer, ureidopyrimidone acrylate, were copolymerized with various alkyl acrylates and bisphenol A ethoxylate diacrylate. Control of T(g) from 0 to 60 °C is demonstrated: concentration of hydrogen bonding moieties is varied from 0 to 40 wt %; concentration of the diacrylate is varied from 0 to 30 wt %. Toughness ranges from 0.06 to 0.14 MPa and is found to peak near 20 wt % of the supramolecular cross-linker. A widely tunable class of amorphous triple-shape memory polymers has been developed and characterized through dynamic and quasi-static thermomechanical testing to gain insights into the dynamics of supramolecular networks.     

Synthesis and screening of libraries of synthetic tripodal receptor molecules with three different amino acid or peptide arms: identification of iron binders

A novel selectively deprotectable triazacyclophane scaffold was used for the design and split-mix synthesis of two libraries of solid-phase bound tripodal synthetic receptors possessing three different amino acid or peptidic arms. In the synthesis of the first library, the two outer arms consisted of amino acid Ala, Arg, Asp, Gln, Gly, Lys, Phe, Ser, Tyr, or Val and the middle arm consisted of amino acid Asn, Glu, His, Leu, or Pro. The second library contained amino acid and/or (di)peptide arms. The arms were different in all library members. The first outer arm consisted of amino acid(s) Ala, Arg, Gln, Phe, or Ser, the second outer arm consisted of amino acid(s) Asp, Gly, Lys, Tyr, or Val, and the middle arm consisted of amino acid(s) Asn, Glu, His, Leu, or Pro, leading to a 27 000 member library of synthetic tripodal receptor molecules. In on-bead screening experiments, a remarkable selectivity of some library members for Fe(3+) was observed and decoding of their structures by Edman degradation revealed consensus sequences with structural resemblance to non-heme iron proteins.