Extraction of Co(II) and Ni(II) ammine cations from aqueous solutions into chloroform by highly lipophilic crown carboxylic acids

The proton-ionizable crown ethers, 2-[(sym-dibenzo-14-crown-4)oxy]-decanoic acid (1), 2-[sym-dibenzo-16-crown-5)oxy]decanoic acid (2), and 2-[sym-dibenzo-19-crown-6)oxy]decanoic acid (3) efficiently extract Co(II) and Ni(II) ammine cations from highly alkaline aqueous solutions (pH>10) into chloroform. For extractions of the individual metal species,2 is more efficient than1 or3. In competitive extraction systems, good selectivity for Co(II) ammine cations over Ni(II) ammine cations is observed.     

Bis(crown ether)s as Na+-K+ ATPase model in a liquid membrane

A new type of bis(crown ether)s containing 15-crown-5 and monoaza-18-crown-6 actively transported Na⁺ and K⁺ in opposite directions across a dichloromethane membrane by pH control. The effect of the structure of the ion carriers on their transport abilities was examined. A key point for the molecular design of the carriers is how to give them complexing ability toward Na⁺ under acidic conditions. A proper choice of the transport conditions was found to be essential for the success of the double uphill transport.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Coamplexation of mercury(II) compounds by crown ethers in organic media

Complexes between crown ethers having ring sizes of 15–24 atoms and 5 to 8 oxygens with HgX₂ species (X = Cl, I, CN, SCN) have been prepared and studied. Interactions of the substituents X bound to mercury with groups or fragments in the crown compound are essential in determining the characteristics and stability of the complexes formed. Complexes with crowns of 18C6 ring sizes are the most favourable except for HgX₂ compounds for which the size of X is larger than the macrocycle ring, as is the case for X = CF₃.     

Solvent extraction of univalent and bivalent metal picrates with 1,2-bis[2-(2-methoxyethoxy)ethoxy] benzene (noncyclic crown ether) into CHCl3

The overall extraction equilibrium constants, K_ex, of 1:1:m complexes of 1,2-bis[2-(2-methoxyethoxy)ethoxyjbenzene (AC · B18C6) with uni- and bivalent metal picrates, MA _m were determined at 25°C between CHCl₃ and water, and thereby the ion-pair complex-formation constants,K _MLA,o, of AC · B18C6 with the univalent metal picrates in CHCl₃ were calculated. The AC · B18C6 is an open-chain analog of benzo-18-crown-6 (B18C6). The equilibrium constants of AC · B18C6 were compared with those of B18C6. K_ex sequences of AC · B18C6 for uni- and bivalent metals are Tl⁺ > K⁺ > Rb⁺ > Cs⁺ > Na⁺ > Li⁺ and Pb²⁺ > Ba²⁺ > Sr²⁺, respectively. The same extraction-selectivity was observed for B18C6, but the extractability of AC · B18C6 for the same cation is much lower than that of B18C6; the extraction selectivity of AC · B18C6 for alkali metals is lower than that of B18C6. TheK _MLA,o sequence of AC · B18C6 is K⁺ > Rb⁺ > Tl⁺ > Cs⁺ Na⁺, which is consistent with that of B18C6. ButK _MLA,o of AC · B18C6 is much smaller than the correspondingK _MLA,o of B18C6; the selectivity of AC · B18C6 among alkali metal picrates in CHCl₃ is lower than that of BI8C6. This reflects the difference in the structures between AC · B18C6 (acyclic and flexible) and B18C6 (cyclic and rigid).     

Thermocontrolling ion permeation through binary component membrane composed of crown ether liquid crystal/PVC

In view of the nature of orderness in structure and the mesomorphism in property of liquid crystal, the function of which is further exploited by integrating it with the feature of crown ether. The monoarmed crown ether liquid crystals are successfully applied to the imitation of biomembrane transport. Binary component membrane composed of crown ether liquid crystal and PVC was first developed. Such a novel model of biomimetic membrane is capable of imitating ingeniously the thermocontrolling transport of biomembrane, thus the essential function of liquid crystal in membane transport is more fully exploited. It was suggested, consequently, that the molecules of the crown ether liquid crystal could assemble themselves to form ionic channels, as they exist in mesophase.Of still more significance is that the thermocontrolling transport of ions through the membrane is found to be operative selectively and the permeation of ion is under the direct influence of the thermal turmoil of the crown ether liquid cr     

Ion-pair extraction of tetravalent plutonium from hydrochloric acid medium using crown ethers

Ion-pair extraction behaviour of plutonium (IV) from varying concentrations of HCl solution was studied employing crown ethers (benzo-l5-crown-5 (B15C5), 18-crown-6, (18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6, (DC18C6), dibenzo-24-crown-8 (DB24C8) and dicyclohexano-24-crown-8 (DCH24C8)) in nitrobenzene as the extractant. Ammonium metavanidate was used as the holding oxidant in the aqueous phase and the conditions necessary for the quantitative extraction of the tetravalent ion were found. The co-extraction of species of the type [HL⁺].[HPu(Cl) ₆ ^– ] and [HL⁺]2·[Pu(Cl) ₆ ^2– ] as ion-pairs (where L represents the crown ether) is suggested.     

Solvent extraction separation of gallium with 18crown6 from chloride media

Gallium was quantitatively extracted with 0.02M 18crown6 in methylene chloride from 6M hydrochloric acid, then stripped with 1M acetic acid and determined with 2-(pyridylazo)naphthol with measurement at 545 nm. Gallium was separated from indium, thallium, lead, aluminium and bismuth. The method was applied to determination of gallium in bauxite.     

Proton-ionizable crown compounds. 12. Proton-Coupled selective membrane transport of Li+ using a proton-ionizable pyridono macrocycle

The macrocycle-mediated fluxes of several alkali metal cations have been determined in a H₂O-CH₂Cl₂-H₂O liquid membrane system. Water-insoluble proton-ionizable macrocycles of the pyridono type were used. The proton-ionizable feature allows the coupling of cation transport to reverse H⁺ transport. This feature offers promise for the effective separation and/or concentration of alkali metal ions with the metal transport being driven by a pH gradient. A counter anion in the source phase is not co-transported. The desired separation of a particular metal ion involves its selective complexation with the macrocycle, subsequent extraction from the aqueous phase to the organic phase, and exchange for H⁺ at the organic phase-receiving phase interface. Factors affecting transport which were studied include ring size, source phase pH, and receiving phase pH. Lithium was transported at a rate higher than that of the other alkali metals in both single and competitive systems using a 15-crown-5 pyridono carrier.     

The complexation of alkali metal ions by crown ethers,aza crown ethers,and cryptands in propylene carbonate

The reactions between alkali metal ions and crown ethers, aza crown ethers, and cryptands in propylene carbonate were studied by potentiometric and calorimetric titrations. The most stable complexes formed by macrocyclic and macrobicyclic ligands are when the ligand and cation dimensions are comparable. On comparing the complex stabilities of crown ethers and aza crown ethers of the same size, crown ethers were, on the whole, found to form the most stable complexes, with the exception of the lithium cation. Enthalpic factors are responsible. Substitution of the amino group protons of the aza crown ethers by benzyl groups leads to a high increase in values of the reaction enthalpy. This effect is partly compensated by entropic contributions. The bulky benzyl groups reduce the ligand solvent interactions and induce a ligand conformation with the lone pair of electrons from the nitrogen donor atoms which are more or less directed inside the cavity. The thermodynamic data for the transfer from methanol to propylene carbonate indicate that the ligands containing nitrogen show specific interactions with methanol.This paper is dedicated to Professor H. Strehlow on the occasion of his 70th birthday.     

Extraction and transport of lithium ion by a crown ether-alkylphosphoric acid system [1]

Mixed carrier systems composed of crown ethers and alkylphosphoric acids have been studied as lithium ionophores using a solvent extraction technique and in transport across liquid membranes. The combination of dibenzo-14-crown-4 and bis(2-ethylhexyl) phosphoric acid showed a synergistic enhancement on both lithium ion selectivity and transport rate. The synergistic effects depended strongly upon crown ether structure and the enhancement was observed only when the metal cation corresponded to the crown ether's cavity diameter. Complex formation in the organic phase was assessed by use of FAB-mass spectrometry.     

Ion-pair extraction of Co(II) by crown ethers from perchlorate medium

The extraction of cobalt(II) by chloroform solutions of the crown ethers (CE) 12C4, I5C5, 18C6, Dbl8C6, Dchl8C6 or Dch24C8 from aqueous perchlorate medium was investigated. Slope analysis of the experimental data suggested that the extraction of Co(II) by these CEs takes place through ion-pair formation, and that the chemical formula of the main extracted species is Co(OH)(+)ClO(-)(4).CE. The magnitudes of the extraction constants are in the sequence 18C6 > Dch18C6 > Dch24C8 > Db18C6 > 15C5 > 12C4, which is discussed in terms of the correspondence between the CE cavity size and the ionic radius of cobalt(II).     

Complex forming and extraction properties of oligo benzo-fused crown ethers

The complex forming properties with alkali metal and ammonium ions of a series of oligo benzo-condensed 18-crown-6 ethers1–8 having a different gradation of lipophilicity and of molecular rigidity are investigated by voltammetry at the interface of two immiscible electrolyte solutions (ITIES) and by a liquid-liquid extraction technique. The experimental results obtained in the two phase system H₂O/nitrobenzene are discussed in relation to the structure of the crown and the cation type. The stability constants for the 1 : 1 complexes of Na⁺, K⁺, Rb⁺, Cs⁺ and NH ₄ ⁺ in nitrobenzene have been determined and compared with the extraction constants for the 1: 1 complexes of Na⁺ and K⁺ and for the 1 : 1 and 1 : 2 complexes of Cs⁺, showing the effect of oligo benzo condensation for the 18-crown-6 system.     

Synthesis and enantioselective transport studies of both enantiomers of new chiral proton-ionizable crown ethers containing a diarylphosphinic acid unit

The synthesis of four new enantiopure crown ethers containing a diarylphosphinic acid unit has been carried out. As a continuation of our work in this field, the enantioselective transport ability of these ligands for chiral amines has been studied in an aqueous source phase/lipophilic organic bulk liquid membrane/aqueous receiving phase system controlled by the pH of the media. By altering the structures of the carriers we improved the enantioselectivity of the transport.     

The syntheses of phenol-containing diazamacrocycles and liquid membrane transports of alkali cations

Two new bisphenol-containing diazacrown ether derivatives, 7,16-bis(2-hydroxy-5-ethylbenzoatebenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (1) and 7,16-bis(2-hydroxy-3,4-dimethylbenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (2), have been synthesized via one-pot Mannich reaction. The compound 1 is structurally characterized. The liquid membrane transports of alkali metal cations using these two new diazamacrocycles and the other previously prepared diazamacrocyclic derivative 7,16-bis(3-hydroxy-6-methyl-2-pyridylmethyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (3) as ion-carriers are also studied. The results show that the rates of cation transports are closely related to the number of nitrogen donors and the steric effect of the substituted groups. Compared with other macrocyclic compounds, compound 1 shows a good selectivity for Li⁺, therefore providing a new efficient carrier for Li⁺ extraction.     

Transport of calcium and potassium ions in opposite directions in a liquid membrane system

A new type of 18-crown-6 derivative having two carboxylic acids on the side arms transported calcium and potassium ions in opposite directions across a dichloromethane membrane by pH control. Calcium and potassium ions were concentrated in the acidic and the basic phases, respectively. The presence of picrate ion in the acidic phase plays an important role in the transport of potassium ion from the acidic to the basic phase.     

Study of the kinetics of the transport of Cu(II), Cd(II) and Ni(II) ions through a liquid membrane

The coupled transport of Cu(II), Cd(II) and Ni(II) ions through a bulk liquid membrane (BLM) containing pyridine-2-acetaldehyde benzoylhydrazone (2-APBH) as carrier dissolved in toluene has been studied. Once the optimal conditions of extraction of each metal were established, a comparative study of the transport kinetics for these metals was performed by means of a kinetic model involving two consecutive irreversible first-order reactions. The kinetic parameters (apparent rate constants of the metal extraction and re-extraction reactions (k ₁, k ₂), the maximum reduced concentration of the metal in the liquid membrane (), the time of the maximum value of R _o ( t _max) and the maximum entry and exit fluxes of the metal through the liquid membrane ( and ) of the extraction and stripping reactions were evaluated and results showed good agreement between experimental data and theoretical predictions. Complete transport through the membrane took place according to the following order: Cd(II)>Cu(II)>Ni(II), with similar kinetic parameters obtained for Cu(II) and Cd(III). The transport behaviour of Ni(II) was different to that of Cu(II) and Cd(III), probably due to the different stoichiometry of the nickel complex compared to those of the other metal ions and the different chemical conditions required for its formation. The influence of the sample salinity on the transport kinetics was studied. k ₁ values decreased slightly when the feed solution salinity was increased for Cu(II) and Ni(II), but not for Cd(II). Values of k ₂ were practically unaffected. The proposed BLM was applied to the preconcentration and separation of metal ions (prior to their determination) in water samples with different saline matrices (CRM, river water and seawater), and good agreement with the certified values was obtained.     

Effect of solvent upon competitive liquid-liquid extraction of alkali metal cations by isomeric dibenzo-16-crown-5-oxyacetic acids

The selectivity and efficiency of competitive liquid-liquid extraction of alkali metal cations into organic solvents containingsym-(octyl)dibenzo-16-crown-5-oxyacetic acid (2) andsym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid (3) have been determined. Solvents examined include: dichloromethane, chloroform, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, benzene, toluene,p-xylene, chlorobenzene, 1,2-dichlorobenzene, and 1,2,3,4-tetrahydronaphthalene. The Na⁺/K⁺ and Na⁺/Li⁺ extraction ratios are highest in chloroform. The extraction selectivity is found to correlate with the diluent parameter (DP) of the organic solvent.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

New Poly - and Bis(crown ether)s as Extracting Reagents

Abstract

New poly- and bis(crown ether)s containing benzo-15-crown-5 or benzo-18-crown-6 moieties were synthesized as extracting reagents, and by a preliminary solvent extraction of alkali metal picrates the poly- and bis-(crown ether)s were found to extract the cations capable of forming sandwich-type 2:1 complexes more effectively than their monomeric analogs.     

Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.