Nanomechanical characteristics of SnO2:F thin films deposited by chemical vapor deposition

The nanoindentation characterizations and mechanical properties of fluorine-doped tin oxide (SnO₂:F) films deposited on glass substrates, using chemical vapor deposition (CVD) method, were studied, which included the effects of the indentation loads, the loading time and the hold time on the thin film. The surface roughness, fractal dimension and frictional coefficient were also studied by varying the freon flow rates. X-ray diffraction (XRD), atomic force microscopy (AFM) and frictional force microscopy (FFM) were used to analyze the morphology of the microstructure. The results showed that crystalline structure of the film had a high intensity (1 1 0) peak orientation, especially at a low freon flow rate. According to the nanoindentation records, the Young's modulus ranged from 62.4 to 75.1 GPa and the hardness ranged from 5.1 to 9.9 GPa at a freon flow rate of 8000 sccm. The changes in measured properties were due to changing loading rate.     

Optical properties and electronic transitions of SnO2 thin films by reflection electron energy loss spectroscopy

Optical properties of SnO₂ thin films in the 4–60 eV energy range are determined by reflection electron energy loss spectroscopy. Bulk and surface electron loss functions, real and imaginary parts of the dielectric function, refraction index, extinction and absorption coefficients are obtained from the analysis of the electron energy loss spectra. Electronic transitions are identified through the interpretation of the optical data. The samples (250–500 nm thick) were produced by ion beam-induced chemical vapor deposition. It is found that the compacity of the SnO₂ thin films affects their optical properties and therefore the relative intensity of the observed electronic transitions. The advantages of this method to determine optical properties of thin films are discussed. Inelastic mean free paths (6.2, 17 and 41 Å for electrons traveling in SnO₂ with kinetic energies of 300, 800 and 2000 eV, respectively) are obtained from the corresponding inelastic electron scattering cross-sections.     

Ultrahigh supercapacitance in cobalt oxide nanorod film grown by oblique angle deposition technique

Nanorod films of cobalt oxide (Co₃O₄) have been grown by a unique oblique angle deposition (OAD) technique in an e-beam evaporator for supercapacitor electrode applications. This technique offers a non-chemical route to achieve large aspect ratio nanorods. The fabricated electrodes at OAD 80° exhibited a specific capacitance of 2875 F/g. The electrochemically active surface area was 1397 cm⁻², estimated from the non-Faradaic capacitive current region. Peak energy and power densities obtained for Co₃O₄ nanorods were 57.7 Wh/Kg and 9.5 kW/kg, respectively. The Co₃O₄ nanorod electrode showed a good endurance of 2000 charge-discharge cycles with 62% retention. The OAD approach for fabricating supercapacitor nanostructured electrodes can be exploited for the fabrication of a broad range of metal oxide materials.     

Studies on the structural and electrical properties of F-doped SnO2 film prepared by APCVD

Fluorine-doped tin oxide films (SnO₂:F, FTO) were deposited by atmosphere pressure chemical vapor deposition (APCVD) on Na-Ca-Si glass coated with a diffusion barrier layer of SiO_xC_y. The effects of post-heating time at 700 °C on the structural and electrical properties of SnO₂:F films were investigated. The results showed that SnO₂:F films were polycrystalline with tetragonal SnO₂ structure, SnO phase was present in SnO₂ film, and abnormal grain growth was observed. The element distribution in the film depth was measured with X-ray photoelectron spectroscopy (XPS) and revealed that when the heating time increased from 202 s to 262 s, the oxygen content in the surface increased from 78.63% to 83.38%. The resistivity increased from 3.13 × 10⁻⁴ for as-deposited films to 4.73 × 10⁻⁴ Ω cm when post-heated for 262 s. Hall mobility is limited by the ionized impurity scattering rather than the grain boundary scattering.     

Effect of environment and heat treatment on the optical properties of RF-sputtered SnO2 thin films

Thin films of SnO₂ were deposited by RF-magnetron sputtering on quartz substrates at room temperature in an environment of Ar and O₂. The XRD pattern shows amorphous nature of the as-deposited films. The optical properties were studied using the reflectance and transmittance spectra. The estimated optical band gap (E_g) values increase from 4.15 to 4.3 eV as the Ar gas content decreases in the process gas environment. The refractive index exhibits an oscillatory behavior that is strongly dependent on the sputtering gas environment. The Urbach energy is found to decrease with increase in band gap. The band gap is found to decrease on annealing the film. The role of oxygen defects is explored in explaining the variation of optical parameters.     

不同Sb含量p-SnO2薄膜的制备和特性

采用化学气相沉积方法, 利用Sb₂O₃/SnO作为源材料, 在蓝宝石衬底上制备出不同Sb掺杂量的SnO₂薄膜, 并在此基础上制作出p-SnO₂:Sb/n-SnO₂同质p-n 结器件. 研究表明, 随着Sb含量的增加, 样品表面变得平滑, 晶粒尺寸逐渐增大, 且晶体质量有所改善, 发现少量Sb的掺入可以起到表面活化剂的作用. Hall测量结果证实适量Sb的掺杂可以使SnO₂呈现p型导电特性, 当Sb₂O₃/SnO的质量比为1:5时, 其电学参数为最佳值. 此外, p-SnO₂:Sb/n-SnO₂同质p-n结器件展现出良好的整流特性, 其正向开启电压为3.4 V.     

Properties of In2S3 thin films deposited onto ITO/glass substrates by chemical bath deposition

In₂S₃ films have been chemically deposited on ITO coated glass substrates by chemical bath deposition, using different deposition times and precursor concentrations. The bilayers are intended for photovoltaic applications. Different characterization methods have been employed: optical properties of the films were investigated from transmittance measurements, structural properties by XRD and micro-Raman, and surface morphology by SEM microscopy analysis. Also, the direct and indirect band-gaps and the surface gap states were studied with surface photovoltage spectroscopy (SPS). We proposed that electronic properties of the In₂S₃ samples are controlled by two features: shallow tail states and a broad band centred at 1.5 eV approximately. Their relation with the structure is discussed, suggesting that their origin is related to defects created on the S sub-lattice, and then both defects are intrinsic to the material.     

化学溶液法制备的Pb(Mg1/3Nb2/3)O3-PbTiO3薄膜的光学性能

用化学溶液方法在宝石衬底及有LaNiO₃缓冲层的Pt/TiO₂/SiO₂/Si衬底上制备了92%Pb(Mg_1/3Nb_2/3)O₃-8%PbTiO₃(PMNT)薄膜，X射线衍射测试结果表明：在有LaNiO₃缓冲层的Pt/TiO₂/SiO₂/Si衬底上制备的PMNT薄膜几乎是纯钙钛矿相，且薄膜 关键词： PMNT薄膜 光学性能 化学溶液法     

Structural and optical properties of pulsed laser deposited SrBi2Nb2O9 thin films

SrBi₂Nb₂O₉ (SBN) thin films were prepared on fused quartz substrates at room temperature by pulsed laser deposition. The influence of deposition parameters such as target-to-substrate distance, oxygen pressure and annealing temperature on film crystallization behavior was investigated by X-ray diffraction. Results indicated that the films grown at the optimum processing conditions have polycrystalline structure with a single layered perovskite phase. The optical transmittance of the films prepared at various oxygen pressures was measured in the wavelength range 200–900 nm using UV–vis spectrophotometer. The results showed that there is a red shift in the optical absorption edge with a rise in the oxygen pressure. Refractive index as a function of wavelength and optical band gap of the films were determined from the optical transmittance spectra. The results indicated that the refractive index increases with increasing oxygen pressure at the same incident light wavelength, while the band gap reduces from 4.13 to 3.88 eV. It may be attributed to an increase in packing density and grain size, and decrease in oxygen defects.     

Photoelectrochemical properties of electrochemically deposited CdIn2S4 thin films

Thin films of CdIn₂S₄ have been deposited on to stainless steel and fluorine-doped tin oxide (FTO)-coated glass substrates from aqueous acidic bath using an electrodeposition technique. Ethylene diamine tetra-acetic acid (EDTA) disodium salt is used as complexing agent to obtain good-quality deposits by controlling the rate of the reaction. The different preparative parameters like concentration of bath, deposition time, bath temperature, pH of the bath have been optimized by the photoelectrochemical (PEC) technique in order to get good-quality photosensitive material. Different techniques have been used to characterize CdIn₂S₄ thin films. Optical absorption shows the presence of direct transition with band gap energy 2.17 eV. The X-ray diffraction (XRD) analysis of the as-deposited and annealed films showed the presence of polycrystalline nature. Energy-dispersive analysis by X-ray (EDAX) study for the sample deposited at optimized preparative parameters shows that the In-to-Cd ratio is almost 2 and S-to-Cd ratio is almost 4. Scanning electron microscopy (SEM) for samples deposited at optimized preparative parameters reveals that spherical grains are uniformly distributed over the surface of the substrate indicates the well-defined growth of polycrystalline CdIn₂S₄ thin film. PEC characterization of the films is carried out by studying photoresponse, spectral response and photovoltaic output characteristics. The fill factor (ff) and power conversion efficiency (η) of the cell are 69 and 2.94%, respectively.     

Effect of deposition temperature on orientation and electrical properties of (K0.5Na0.5)NbO3 thin films by pulsed laser deposition

Lead-free ferroelectric K_0.5Na_0.5NbO₃ (KNN) thin films have been prepared on Pt/TiO₂/SiO₂/Si substrates by pulsed laser deposition process. The structures, crystal orientations and electrical properties of thin films have been investigated as a function of deposition temperature from 680 °C to 760 °C. It is found that the deposition temperature plays an important role in the structures, crystal orientations and electrical properties of thin films. The crystallization of thin films improves with increasing deposition temperature. The thin film deposited at 760 °C exhibits strong (0 0 1) preferential orientation, large dielectric constant of 930 and the remnant polarization of 8.54 μC/cm².     

Study of the structure and electrical properties of the copper nitride thin films deposited by pulsed laser deposition

Copper nitride thin films were prepared on glass and silicon substrates by ablating a copper target at different pressure of nitrogen. The films were characterized in situ by X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and ex situ by X-ray diffraction (XRD). The nitrogen content in the samples, x = [N]/[Cu], changed between 0 and 0.33 for a corresponding variation in nitrogen pressure of 9 × 10⁻² to 1.3 × 10⁻¹ Torr. Using this methodology, it is possible to achieve sub-, over- and stoichiometric films by controlling the nitrogen pressure. The XPS results show that is possible to obtain copper nitride with x = 0.33 (Cu₃N) and x = 0.25 (Cu₄N) when the nitrogen pressure is 1.3 × 10⁻¹ and 5 × 10⁻² Torr, respectively. The lattice constants obtained from XRD results for copper nitride with x = 0.25 is of 3.850 Å and with x = 0.33 have values between 3.810 and 3.830 Å. The electrical properties of the films were studied as a function of the lattice constant. These results show that the electrical resistivity increases when the lattice parameter is decreasing. The electrical resistivity of copper nitride with x = 0.25 was smaller than samples with x = 0.33.     

Synthesis of MgB2 films by diffusion of magnesium into electrophoretically deposited boron films

The boron films were formed from the optimized stable suspension solution of boron particles using electrophoretic deposition technique. The magnesium film with optimized thickness was deposited onto boron films by vacuum evaporation technique. The heterogeneous structure was given heat treatment in ambient and vacuum atmosphere for diffusion of Mg into the boron films to form MgB₂ phase. XRD studies were carried out on both as deposited and heat treated heterostructure films to investigate their structure and phase. Surface morphological studies of these films were done by SEM.     

On the structure, morphology, and optical properties of chemical bath deposited Sb2S3 thin films

In the present paper, we have reported the room temperature growth of antimony sulphide (Sb₂S₃) thin films by chemical bath deposition and detailed characterization of these films. The films were deposited from a chemical bath containing SbCl₃ and Na₂S₂O₃ at 27 °C. We have analysed the structure, morphology, composition and optical properties of as deposited Sb₂S₃ films as well as those subjected to annealing in nitrogen atmosphere or in air. As-deposited films are amorphous to X-ray diffraction (XRD). However, the diffused rings in the electron diffraction pattern revealed the existence of nanocrystalline grains in these films. XRD analysis showed that upon annealing in nitrogen atmosphere these films transformed into polycrystalline with orthorhombic structure. Also, we have observed that during heating in air, Sb₂S₃ first converts into orthorhombic form and then further heating results in the formation of Sb₂O₃ crystallites. Optical bandgap energy of as deposited and annealed films was evaluated from UV-vis absorption spectra. The values obtained were 2.57 and 1.73 eV for the as-deposited and the annealed films respectively.     

Structural, optical and electrical properties of Cd-doped SnO2 thin films grown by RF reactive magnetron co-sputtering

Transparent conducting SnO₂:Cd thin films were prepared by RF reactive magnetron co-sputtering on glass slides at a substrate temperature of 500 °C using CdO as cadmium source. The films were deposited under a mixed argon/oxygen atmosphere. The structural, optical and electrical properties were analyzed as a function of the Cd amount in the target. The X-ray diffraction shows that polycrystalline films were grown with both the tetragonal and orthorhombic phases of SnO₂. The obtained films have high transmittance and conductivity. The figure of merit of SnO₂:Cd films are in the order of 10⁻³ Ω⁻¹, which suggests that these films can be considered as candidates for transparent electrodes.     

Influence of deposition pressure on structural, optical and electrical properties of nc-Si:H films deposited by HW-CVD

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films were deposited using HW-CVD technique at various deposition pressures. Characterisation of these films from Raman spectroscopy revealed that nc-Si:H thin films consist of a mixture of two phases, crystalline phase and amorphous phase containing small Si crystals embedded therein. We observed increase in crystallinity in the films with increase in deposition pressure whereas the size of Si nanocrystals was found ∼2 nm over the entire range of deposition pressure studied. The FTIR spectroscopic analysis showed that with increasing deposition pressure the predominant hydrogen bonding in the films shifts from, Si-H to Si-H₂ and (Si-H₂)_n complexes and the hydrogen content in the films was found in the range 6.2-9.3 at% over the entire range of deposition pressure studied. The photo and dark conductivities results also indicate that the films deposited with increasing deposition pressure get structurally modified. It has been found that the optical energy gap range was between 1.72 and 2.1 eV with static refractive index between 2.85 and 3.24. From the present study it has been concluded that the deposition pressure is a key process parameter to induce the crystallinity in the Si:H thin films using HW-CVD.     

Optical and electrical properties of Y2O3 thin films prepared by ion beam assisted deposition

Y₂O₃ thin films were deposited by ion beam assisted deposition (IBAD) and the effects of fabrication parameters such as substrate temperature and ion energy on the structure, optical and electrical properties of the films were investigated. The results show that the deposited Y₂O₃ films had less optical absorption, larger refractive index, and better film crystallinity with the increase of substrate temperature or ion energy. The as-deposited Y₂O₃ films without ion-beam bombardment had larger relative dielectric constant (?_r) and the ?_r decreased with time even over by 40%, while the ?_r of films prepared with high ion energy had less changes, only less than 3%. Also, with the increase of ion energy, the electrical breakdown strength and the figure of merit increased.     

Structure-related infrared optical properties of BaTiO3 thin films grown on Pt/Ti/SiO2/Si substrates

BaTiO₃ thin films with different thickness have been grown on Pt/Ti/SiO₂/Si substrates by a modified sol-gel method. X-ray diffraction analyses show that the BaTiO₃ thin films are polycrystalline. The crystalline quality of the films is improved with increasing thickness. The infrared optical properties of the BaTiO₃ thin films have been investigated using an infrared spectroscopic ellipsometry in the wave number range of 800-4000 cm⁻¹ (2.5-12.5 μm). By fitting the measured pseudodielectric functions with a three-phase model (Air/BaTiO₃/Pt), and a derived classical dispersion relation for the thin films, the optical constants and thicknesses of the thin films have been simultaneously obtained. The refractive index of the BaTiO₃ thin films increases and on the other hand, the extinction coefficient does not change with increasing thickness in the entirely measured wave number range. The dependence of the refractive index on the film thickness has been discussed in detail and was mainly due to both the crystalline quality of the films and packing density. Finally, the absorption coefficient was calculated in the infrared region for applications in the pyroelectric IR detectors.     

Structure, morphology and optical properties of SiO2−x thin films prepared by plasma-assisted pulsed laser deposition

The amorphous silicon oxide SiO_2−x thin films were prepared by the plasma-assisted pulsed laser deposition (PLD) method. X-ray diffraction spectrometry (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), UV-VIS-NIR scanning spectrophotometry and ellipsometry were used to characterize the crystallinity, microscopic morphology and optical properties of obtained thin films. The influences of substrate temperatures, oxygen partial pressures and oxygen plasma assistance on the compositions of silicon oxide (SiO_2−x) thin films were investigated. Results show that the deposited thin films are amorphous and have high surface quality. Stoichiometric silicon dioxide (SiO₂) thin film can be obtained at elevated temperature of 200 °C in an oxygen plasma-assisted atmosphere. Using normal incidence transmittance, a novel and simple method has been proposed to evaluate the value of x in transparent SiO_2−x thin films on a non-absorbing flat substrate.     

Vanadium-Al2O3 nanostructured thin films prepared by pulsed laser deposition: Optical switching

The formation and optical response of VO_x nanoparticles embedded in amorphous aluminium oxide (Al₂O₃) thin films by pulsed laser deposition is studied. The thin films have been grown by alternate laser ablation of V and Al₂O₃ targets, which has resulted in a multilayer structure with embedded nanoparticles. The V content has been varied by changing the number of pulses on the V target. It is found that VO_x nanoparticles with dimensions around 5 nm have been formed. The structural analysis shows that the vanadium nanoparticles are oxidized, although probably there is not a unique oxide phase for each sample. The films show a different optical response depending on their vanadium content. Optical switching as a function of temperature has been observed for the two films with the highest vanadium content, at transition temperatures of about −20 °C and 315 °C thus suggesting the presence of nanoparticles with compositions V₄O₇ and V₂O₅, respectively.