Characterization and aging effect study of nitrogen-doped ZnO nanofilm

The influence of sputtering and annealing conditions and aging effect on properties of sputtered ZnO:N thin films were investigated. Achieved results confirmed a planar growth of nitrogen-doped ZnO film with a high uniform and smooth surface morphology. Incorporation of nitrogen in the ZnO films made new Raman shifts. X-ray diffraction spectra showed only the ZnO (0 0 2) diffraction peak, which was slightly shifted toward lower angels, compared to pure ZnO, which is the result of incorporating nitrogen in the ZnO films. The amount of this shift was proportional to N concentration. In addition, annealed samples showed better crystallinity with lower shift due to dramatically reduction of N atoms during the annealing. The Hall effect measurements exhibited p-type behaviour on annealed ZnO:N thin films while the un-annealed samples showed n-type conductivity. Aging effect studies demonstrated that the N content of thin films decreased dramatically as time passed. The reduction of N concentration in annealed samples was lower than un-annealed ones after 6 months.     

Evaluation of zinc self-diffusion at the interface between homoepitaxial ZnO thin films and (0001) ZnO substrates

Isotopic ZnO thin films were deposited on the c-plane of ZnO single crystals by pulsed laser deposition. The isotopic abundance of Zn in the films was determined with a secondary ion mass spectrometry before and after the films was diffusion annealed. The diffusion profiles across the film/substrate interface behaved smooth features. The zinc diffusion coefficient (D_Zn) was obtained by analyzing the slope of the profile in the annealed sample. The temperature dependence of D_Zn was determined to be D_Zn(cm²/s)=8.0×10⁴exp(?417[kJ/mol])/RT, where R and T are gas constant and temperature. The zinc ion diffusion coefficients were of the same order as that in a ZnO single crystal. A comparison of the experimental and theoretical values indicated that the zinc ions diffused in the thin film and the single crystal through a vacancy mechanism.     

Effects of different annealing atmospheres on the surface and microstructural properties of ZnO thin films grown on p-Si (1 0 0) substrates

Effects of different annealing atmospheres on the surface and microstructural properties of ZnO thin films grown on Si (1 0 0) substrates were investigated. X-ray diffraction results showed that the crystallinity of the ZnO thin film annealed in an oxygen atmosphere was better than that annealed in a nitrogen atmosphere. Atomic force microscopy and transmission electron microscopy (TEM) images showed that the surfaces of the ZnO thin films annealed in a nitrogen atmosphere became very rough in contrast to those annealed in an oxygen atmosphere. High-resolution TEM images showed that many stacking faults and tilted grains could be observed in the ZnO thin films annealed in a nitrogen atmosphere in contrast to those annealed in an oxygen atmosphere. Surface morphology and microstructural property variations due to different annealing atmospheres in ZnO thin films are also described on the basis of the experimental results.     

退火处理对ZnO薄膜晶体结构和导电性能的影响

利用直流反应磁控溅射法在硅衬底上沉积C轴择优取向的ZnO晶体薄膜,将该样品进行退火处理,并测量了样品的导电性能,结果显示退火处理可以引起薄膜的重结晶,从而改善薄膜的结晶状况,改变薄膜中的化学配比.退火后样品的薄膜电阻相对较小,增加了薄膜中施主的浓度,增强了薄膜的导电性.     

Regrowth of ZnO thin film with high surface flatness and enhanced optical properties on annealed buffer layers by rf sputtering deposition

We report a study on improving the surface flatness, optical properties, and crystallinity of ZnO thin films by rf sputtering deposition. ZnO thin films grown on sapphire substrate were first exposed to post-growth annealing, and then used to regrow high-quality ZnO thin films on top. Under the same deposition conditions, the regrown ZnO layers showed much improved crystallinity, surface flatness and enhanced optical properties. The effect of the annealed layer in improving the quality of the ZnO thin film is discussed in terms of characterization results from crystal orientation, surface morphology, and photoluminescence. It was clearly observed that, during the annealing process, the ZnO grains coalesced to form larger grains and smoother surfaces, with better crystallinity and fewer defects, which resulted in the much improved quality of the regrown ZnO thin films.     

The effect of heat treatment on the physical properties of sol-gel derived ZnO thin films

Zinc oxide (ZnO) thin films were deposited on microscope glass substrates by sol-gel spin coating method. Zinc acetate (ZnAc) dehydrate was used as the starting salt material source. A homogeneous and stable solution was prepared by dissolving ZnAc in the solution of monoethanolamine (MEA). ZnO thin films were obtained after preheating the spin coated thin films at 250 °C for 5 min after each coating. The films, after the deposition of the eighth layer, were annealed in air at temperatures of 300 °C, 400 °C and 500 °C for 1 h. The effect of thermal annealing in air on the physical properties of the sol-gel derived ZnO thin films are studied. The powder and its thin film were characterized by X-ray diffractometer (XRD) method. XRD analysis revealed that the annealed ZnO thin films consist of single phase ZnO with wurtzite structure (JCPDS 36-1451) and show the c-axis grain orientation. Increasing annealing temperature increased the c-axis orientation and the crystallite size of the film. The annealed films are highly transparent with average transmission exceeding 80% in the visible range (400-700 nm). The measured optical band gap values of the ZnO thin films were between 3.26 eV and 3.28 eV, which were in the range of band gap values of intrinsic ZnO (3.2-3.3 eV). SEM analysis of annealed thin films has shown a completely different surface morphology behavior.     

Optical and structural analysis of plasma-treated and annealed Al–Sb bilayer thin films

Aluminum–antimony (Al–Sb) seems to be a promising semiconducting material for high-temperature application especially for transistors and P–N junction diodes and is a highly coefficient solar material. No attempt has been made to study the bilayer diffusion properties of Al–Sb thin film by plasma exposure. In this paper, the characterization of plasma-exposed Al–Sb bilayer thin films is presented. Thin films were coated by thermal vapor coating technique, and after coating, the sample was annealed and exposed with plasma. Results were obtained from optical band gap data and X-ray diffraction for treated and untreated Al–Sb thin films, and these results were compared with annealed Al–Sb thin films.     

Al和Sb共掺对ZnO有序阵列薄膜的结构和光学性能的影响

采用水热合成法在预先生长的ZnO种子层的玻璃衬底上制备出Al和Sb共掺ZnO纳米棒有序阵列薄膜. 通过X射线衍射、扫描电镜、透射电镜和选区电子衍射分析表明:所制备的薄膜由垂直于ZnO种子层的纳米棒组成, 呈单晶六角纤锌矿ZnO结构, 且沿[001]方向择优生长, 纳米棒的平均直径和长度分别为27.8 nm和1.02 μm. Al和Sb共掺ZnO纳米棒有序阵列薄膜的拉曼散射分析表明:相对于未掺杂ZnO薄膜的拉曼振动峰(580 cm^-1), Al和Sb共掺ZnO阵列薄膜的E₁(LO)振动模式存在拉曼位移. 当Al和Sb的掺杂量为3.0at%,4.0at%,5.0at%,6.0at%时, Al和Sb共掺ZnO阵列薄膜的拉曼振动峰的位移量分别为3,10,14,12 cm^-1. E₁ (LO) 振动模式位移是由Al和Sb掺杂ZnO产生的缺陷引起的. 室温光致发光结果表明:掺杂Al和Sb后, ZnO薄膜在545 nm处的发光强度减小,在414 nm处的发光强度增加. 这是由于掺杂Al和Sb后, ZnO薄膜中Zn_i缺陷增加, O_i缺陷减少引起的. 关键词： Al和Sb共掺ZnO薄膜 纳米棒有序阵列 结构表征 拉曼散射     

Structure distortion, optical and electrical properties of ZnO thin films co-doped with Al and Sb by so--gel spin coating

ZnO thin films co-doped with Al and Sb with different concentrations and a fixed molar ratio of AlCl₃ to SbCl₃ at 1:2, are prepared by a sol--gel spin-coating method on glass annealed at 550 ℃ for 2 h in air. The x-ray diffraction results confirm that the ZnO thin films co-doped with Al and Sb are of wurtzite hexagonal ZnO with a very small distortion, and the biaxial stresses are 1.03×10⁸, 3.26×10⁸, 5.23×10⁸, and 6.97×10⁸ Pa, corresponding to those of the ZnO thin films co-doped with Al and Sb in concentrations of 1.5, 3.0, 4.5, 6.0 at% respectively. The optical properties reveal that the ZnO thin films co-doped with Al and Sb have obviously enhanced transmittance in the visible region. The electrical properties show that ZnO thin film co-doped with Al and Sb in a concentration of 1.5 at% has a lowest resistivity of 2.5Ω·cm.     

Structure and properties of ZnO films grown on Si substrates with low temperature buffer layers

Zinc oxide (ZnO) thin films were grown on Si (1 0 0) substrates by pulsed laser deposition (PLD) using two-step epitaxial growth method. Low temperature buffer layer (LTBL) was initially deposited in order to obtain high quality ZnO thin film; the as-deposited films were then annealed in air at 700 °C. The effects of LTBL and annealing treatment on the structural and luminescent properties of ZnO thin film were investigated. It was found that tensile strain was remarkably relaxed by employing LTBL and the band-gap redshifted, correspondingly. The shift value was larger than that calculated from band-gap theories. After annealing treatment, it was found that the annealing temperature with 700 °C has little influence on strains of ZnO films with LTBLs other than directly deposited film in our experiments. Interestingly, the different behaviors in terms of the shift of ultraviolet (UV) emission after annealing between films with and without buffer were observed, and a tentative explanation was given in this paper.     

扩散掺杂的p型ZnO薄膜的光学性质研究

采用原子层沉积技术(atomic layer deposition)在InP衬底上生长ZnO薄膜,并在不同温度下(500和700 ℃)进行热退火处理,将P掺杂进入ZnO,得到p型ZnO薄膜。样品的光学特性通过光致发光光谱(photoluminescence, PL)来测定,得出热退火温度是影响P扩散掺杂的重要因素,低温PL光谱中,700 ℃热退火1 h样品的光谱展现出四个与受主相关的发射峰：3.351,3.311,3.246和3.177 eV,分别来自受主束缚激子的辐射复合(A°X)、自由电子到受主的发射(FA)、施主受主对的发射(DAP)以及施主受主对的第一纵向声子伴线(DAP-1LO),计算得到受主束缚能为122 meV,与理论计算结果一致。通过热扩散方式实现了ZnO薄膜的p型掺杂,解决了制约ZnO基光电器件发展的主要问题, 对ZnO基半导体材料及其光电器件的发展有重要意义。     

Effect of dopants on the structural,optical and electrical properties of sol–gel derived ZnO semiconductor thin films

Undoped, Ga-, In-, Zr-, and Sn-doped ZnO transparent semiconductor thin films were deposited on alkali-free glasses by sol–gel method. 2-methoxyethanol (2-ME) and diethanolamine (DEA) were chosen as a solvent and a stabilizer, respectively. The doping concentration was maintained at 2 at.% in the impurity doping precursor solutions. The effects of different dopants on the structural, optical, and electrical properties of ZnO thin films were investigated. XRD results show that all annealed ZnO-based thin films had a hexagonal (wurtzite) structure. ZnO thin films doped with impurity elements obviously improved the surface flatness and enhanced the optical transmittance. All impurity doped ZnO thin films showed high transparency in the visible range (>91%). The Ga- and In- doped ZnO thin films exhibited higher Hall mobility and lower resistivity than did the undoped ZnO thin film.     

Implanted ZnO thin films: Microstructure, electrical and electronic properties

Magnetron sputtered polycrystalline ZnO thin films were implanted using Al, Ag, Sn, Sb and codoped with TiN in order to improve the conductivity and to attempt to achieve p-type behaviour. Structural and electrical properties of the implanted ZnO thin films were examined with X-ray diffractometry (XRD), scanning electron microscopy (SEM), secondary ion mass spectrometry (SIMS), atomic force microscopy (AFM) and conductivity measurements. Depth profiles of the implanted elements varied with the implant species. Implantation causes a partial amorphisation of the crystalline structure and decreases the effective grain size of the films. One of the findings is the improvement, as a consequence of implantation, in the conductivity of initially poorly conductive samples. Heavy doping may help for the conversion of conduction type of ZnO thin films. Annealing in vacuum mitigated structural damage and stress caused by implantation, and improved the conductivity of the implanted ZnO thin films.     

The Al-doping and post-annealing treatment effects on the structural and optical properties of ZnO:Al thin films deposited on Si substrate

Al-doped ZnO (ZnO:Al) thin films with different Al contents were deposited on Si substrates using the radio frequency reactive magnetron sputtering technique. X-ray diffraction (XRD) measurements showed that the crystallinity of the films was promoted by appropriate Al content (0.75 wt.%). Then the ZnO:Al film with Al content of 0.75 wt.% was annealed in vacuum at different temperatures. XRD patterns revealed that the residual compressive stress decreased at higher annealing temperatures. While the surface roughness of the ZnO:Al film annealed at 300 °C became smoother, those of the ZnO:Al films annealed at 600 and 750 °C became rougher. The photoluminescence (PL) measurements at room temperature revealed a violet, two blue and a green emission. The origin of these emissions was discussed and the mechanism of violet and blue emission of ZnO:Al thin films were suggested. We concluded that the defect centers are mainly ascribed to antisite oxygen and interstitial Zn in annealed (in vacuum) ZnO:Al films.     

Effect of annealing on the structural, optical and electrical properties of ZnO thin films by spray pyrolysis

Zinc oxide thin films have been deposited on glass substrates at a substrate temperature of 673 K by spray pyrolysis. The samples are annealed in ambient atmosphere at various temperatures. The effect of annealing on structural, electrical, and optical properties of ZnO films has been investigated. X-ray diffraction patterns show that crystallinity of the ZnO films has been improved after annealing. The morphology of ZnO thin films is studied by atomic force microscopy. The tensile strain (compressive stress) is found to decrease with increase in annealing temperature which indicates the relaxation of tensile strain in ZnO thin films. A decrease in energy band gap is observed with increase of annealing temperature. The mechanism of blue-green luminescence of ZnO thin film has been analyzed. The resistivity is found to decrease with annealing temperature.     

Post-annealing influence on properties of N-In codoped ZnO thin films prepared by ion beam enhanced deposition method

N-In codoped ZnO thin films were prepared by ion beam enhanced deposition method (IBED) and were annealed in nitrogen and oxygen ambient after deposition. The influence of post-annealing on structure, electrical and optical properties of thin films were investigated. As-deposited and all post-annealed samples showed preferential orientation along (0 0 2) plane. Electrical property studies indicated that the as-deposited ZnO film showed p-type with a sheet resistance of 67.5 kΩ. For ZnO films annealed in nitrogen with the annealing temperature increasing from 400 to 800 °C, the conduction type of the ZnO film changed from p-type to n-type. However, for samples annealed in oxygen the resistance increased sharply even at a low annealing temperature of 400 °C and the conduction type did not change. Room temperature PL spectra of samples annealed in N₂ and in O₂ showed UV peak located at 381 and 356 nm, respectively.     

ZnO薄膜的椭偏和DLTS特性

用射频磁控溅射在硅衬底上淀积氧化锌薄膜,并对样品分别作氮气、空气、氧气等不同条件下退火处理。为研究退火气氛对ZnO/Si薄膜中缺陷以及折射率的影响,由深能级瞬态谱(DLTS)以及椭偏测量方法进行了检测。椭偏测量结果表明相对原始生长的样品,在氮气和空气退火使ZnO薄膜折射率下降,但氧气中退火使折射率升高。我们对折射率的这种变化机理进行了解释。DLTS测量得到一个与Zni**相关的深能级中心E1存在,氧气气氛退火可以消除E1能级。在氮气退火情况下Zn*i*的存在对抑制VO引起的薄膜折射率下降有利。     

离子束增强沉积制备p型氧化锌薄膜及其机理研究

采用离子束增强沉积方法在Si和SiO₂/Si衬底上制备In-N共掺杂ZnO薄膜(INZO)，溅射靶是用ZnO和2 atm% In₂O₃粉体均匀混合并压制而成，在氩离子溅射ZnO靶的同时，氮、氩混合离子束垂直注入沉积的薄膜.实验结果显示INZO薄膜具有(002)的择优取向，并且为p型导电，电阻率最低为0.9Ωcm.薄膜在氮气、氧气气氛下退火，对薄膜的结构和电学特性与成膜和退火条件的关系进行了分析. 关键词： 氧化锌薄膜 p型掺杂 离子束增强沉积     

Non-vacuum, single-step conductive transparent ZnO patterning by ultra-short pulsed laser annealing of solution-deposited nanoparticles

A solution-processable, high-concentration transparent ZnO nanoparticle (NP) solution was successfully synthesized in a new process. A highly transparent ZnO thin film was fabricated by spin coating without vacuum deposition. Subsequent ultra-short-pulsed laser annealing at room temperature was performed to change the film properties without using a blanket high temperature heating process. Although the as-deposited NP thin film was not electrically conductive, laser annealing imparted a large conductivity increase and furthermore enabled selective annealing to write conductive patterns directly on the NP thin film without a photolithographic process. Conductivity enhancement could be obtained by altering the laser annealing parameters. Parametric studies including the sheet resistance and optical transmittance of the annealed ZnO NP thin film were conducted for various laser powers, scanning speeds and background gas conditions. The lowest resistivity from laser-annealed ZnO thin film was about 4.75×10⁻² Ω cm, exhibiting a factor of 10⁵ higher conductivity than the previously reported furnace-annealed ZnO NP film and is even comparable to that of vacuum-deposited, impurity-doped ZnO films within a factor of 10. The process developed in this work was applied to the fabrication of a thin film transistor (TFT) device that showed enhanced performance compared with furnace-annealed devices. A ZnO TFT performance test revealed that by just changing the laser parameters, the solution-deposited ZnO thin film can also perform as a semiconductor, demonstrating that laser annealing offers tunability of ZnO thin film properties for both transparent conductors and semiconductors.     

Structural characterization of supported nanocrystalline ZnO thin films prepared by dip-coating

Nanocrystalline ZnO thin films prepared by the sol-gel dip-coating technique were characterized by grazing incidence X-ray diffraction (GIXD), atomic force microscopy (AFM), X-ray reflectivity (XR) and grazing incidence small-angle X-ray scattering (GISAXS). The structures of several thin films subjected to (i) isochronous annealing at 350, 450 and 550 °C, and (ii) isothermal annealing at 450 °C during different time periods, were characterized. The studied thin films are composed of ZnO nanocrystals as revealed by analysing several GIXD patterns, from which their average sizes were determined. Thin film thickness and roughness were determined from quantitative analyses of AFM images and XR patterns. The analysis of XR patterns also yielded the average density of the studied films. Our GISAXS study indicates that the studied ZnO thin films contain nanopores with an ellipsoidal shape, and flattened along the direction normal to the substrate surface. The thin film annealed at the highest temperature, T = 550 °C, exhibits higher density and lower thickness and nanoporosity volume fraction, than those annealed at 350 and 450 °C. These results indicate that thermal annealing at the highest temperature (550 °C) induces a noticeable compaction effect on the structure of the studied thin films.