Pulsed laser deposition of uniform semiconductor nanodot arrays

Uniform arrays of silicon (Si), gallium arsenide (GaAs) and zinc oxide (ZnO) nanodots have been deposited using Pulsed Laser Deposition (PLD) technique combined with a contact mask consisting of nano-holes fabricated by E-beam lithography (EBL). These nanocrystalline semiconductor nanodots have been deposited by PLD on Si and GaAs substrates at room temperature. Characterization of the nanodots has been carried out using different techniques including X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Auger Electron Spectroscopy (AES), and Raman spectroscopy. This work demonstrates a novel technique for deposition of uniform array of semiconductor nanostructures using a contact mask at room temperature for photonic applications.     

Synthesis,characterization, and electrochemical properties of imidazole derivatives functionalized single‐walled carbon nanotubes

The imidazole derivatives functionalized single‐walled carbon nanotubes (SWNTs) were synthesized by a diazonium‐based reaction. We have designed and synthesized two imidazole derivatives to modify SWNTs. The resulting products were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, ultraviolet visible (UV/Vis) spectroscopy, thermo gravimetric analysis (TGA), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Electrochemical measurements via a cyclic voltammetry method revealed that the weak intramolecular electronic interactions presented between the attached imidazole derivatives groups and the nanotubes. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation, characterization and surface morphology of novel optically active poly(ester-amide)/functionalized ZnO bionanocomposites via ultrasonication assisted process

Novel bionanocompoites (BNCs) were prepared using zinc oxide (ZnO) nanoparticles which functionalized by γ-methacryloxypropyltrimethoxysilane (KH570) as a coupling agent. Poly(ester-amide) (PEA) based on tyrosine natural amino acid was synthesized and used as a polymer matrix. PEA/ZnO BNCs were characterized by fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). All the results confirmed that the surface of ZnO particle has sufficient compatibility with PEA through the link of the coupling agent between ZnO and polymer and also proved that the presence of ZnO nanoparticles appeared to be dispersed in nanosize in polymer composite matrix. In addition, thermogravimetric analysis (TGA) data indicated an enhancement of thermal stability of new BNC materials compared with the pure polymer.     

Controlled synthesis, characterization and optical properties of CdS nanocrystalline thin films via chemical bath deposition (CBD) route

In this study, the CdS nanocrystalline thin films obtained from an ammonia-free chemical bath deposition process. The crystallites with a size range of 10–20 nm in diameter with zinc blend (cubic) and wurtzite (hexagonal) crystal structure and strong photoluminescence were prepared from the mixture solutions of: cadmium chloride dihydrate as a cadmium source, thiourea as a sulfur source and sodium citrate dihydrate as a complexing agent for cadmium ions. The well-cleaned glass used as a substrate for thin films deposition. The obtained samples were characterized by the techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), atomic force microscopy (AFM) and fluorescence spectroscopy. Also, the effect of two parameters such as pH and temperature of reaction on the synthesis of CdS nanocrystals was studied. Finally, it was found the CdS nanocrystals showed sharp excitation features and strong “band-edge” emission.     

Deposition of ZnO multilayer on LiNbO3 single crystals by DC-magnetron sputtering

Zinc oxide (ZnO) thin films were deposited on LiNbO₃ (LN) single crystals with 200 nm thicknesses by three different ways, where coating of zinc (Zn) film was followed by thermal oxidation for four, two, and one steps with 50, 100, and 200 nm thicknesses repeatedly. Sample, which was produced at 4-step of deposition and oxidation of Zn layer, showed high transmittance and low structural defect due to a lower photoluminescence intensity and Urbach energy. Average grain size in X-ray diffraction (XRD), scanning electron microscopy (SEM) micrograph, and atomic force microscopy (AFM) images for multilayer of ZnO was lower than monolayer of ZnO thin films. Applying multilayer coating technique leads to decrease of surface roughness and scattering on light on surface and fabrication of LiNbO₃ waveguides with lower optical loss.     

Comparative study of ZnO layers prepared by PLD from different targets at various oxygen pressure levels

Two series of polycrystalline zinc oxide (ZnO) layers, from Zn or ZnO targets, were grown on silicon (1 1 1) substrates by pulsed laser deposition (PLD) at ambient oxygen pressure levels, stepwise increased from 1 to 35 Pa. For ablation of targets, a pulsed Nd:YAG laser was used. The structural and morphological properties of the layers were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), and secondary ion mass spectrometry (SIMS). The SEM images of ZnO layers in SE mode show a uniform granular structure and modified surface morphology, depending on oxygen pressure. The mean grain size in height and lateral directions decreases with an increase of oxygen pressure from 1 to 5 Pa, while a subsequent rise of oxygen pressure from 5 to 35 Pa will cause an increase in the grain size. The AFM measurement revealed that the surface structures of zinc oxide layers grown from different targets were similar, and the layers formed at an ambient oxygen pressure of 5 Pa exhibited the smallest values of calculated roughness and granularity. SIMS depth profiling analyses confirmed that the ZnO composition was homogenous across the layer, up to the abrupt change of chemical composition at the interface between the ZnO layer and the Si substrate.      

Optical properties of ZnO and ZnO:Ce layers grown by spray pyrolysis

In this paper, zinc oxide (ZnO) and cerium-doped zinc oxide (ZnO:Ce) films were deposited by reactive chemical pulverization spray pyrolysis technique using zinc and cerium chlorides as precursors. The effects of Ce concentration on the structural and optical properties of ZnO thin films were investigated in detail. These films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) measurements. All deposited ZnO layers at the temperature 450 °C are polycrystalline and indicate highly c-axis oriented structure. The dimension of crystallites depends on incorporation of Ce atoms into the ZnO films. The photoluminescence spectra of the films have been studied as a function of the deposition parameters such as doping concentrations and post grows annealing. Photoluminescence spectra were measured at the temperature range from 13 K to 320 K.     

Coating zinc oxide submicron crystals on poly(methyl methacrylate) chips and spheres via ultrasound irradiation

Ultrasound irradiation is used for anchoring zinc oxide submicron crystals with a main diameter and length of 280 nm and 470 nm, respectively, onto the surface of poly(methyl methacrylate) PMMA chips (2 mm diameter), and zinc oxide crystals with a mean diameter and length of 150 nm and 230 nm, respectively, onto the surface of the PMMA spheres (1–10 μm). The zinc oxide crystals were obtained by sonochemical irradiation of a mixture containing the PMMA, zinc (II) acetate dihydrate, ethanol, water, and 24 wt.% aqueous ammonia for 2 h, yielding a PMMA–zinc oxide composite. By controlling the atmosphere and reaction conditions, we could achieve well-adhered zinc oxide crystals on the surface of poly(methyl methacrylate). The resulting zinc oxide–PMMA composite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray analysis (EDX), high-resolution scanning electron microscopy (HRSEM), and photoluminescence (PL) spectroscopy. The zinc oxide-deposited PMMA chips (loaded with 0.03–1.0 wt.% ZnO) were successfully homogenized in melt by extrusion and then injection molded into small, disc-shaped samples. These samples were analyzed with respect to their directional spectral optical properties in UV, Vis and IR spectroscopy.     

氧化锌纳米结构的制备及发光性质研究

采用化学气相沉积方法,在氩气和氧气混合气氛下制备了两种四角结构的纳米氧化锌。初始反应物为纯锌粉,反应过程中没有采用任何触媒。采用X射线衍射、扫描电子显微镜、透射电子显微镜、光致发光光谱研究了纳米产物的结构和光学性质。获得的纳米产物为高纯的纤锌矿结构氧化锌。两种氧化锌纳米产物具有三维立体的四角结构,分别为四角锥-片状结构和四角锥-线状结构,具有较大的长径比,呈典型的微/纳结构。通过对两种氧化锌纳米结构的紫外发射峰和可见发射带的对比研究,探讨了氧化锌纳米产物可见发射带的起源,以及影响其发光性质的主要因素。     

Surface morphology and crystalline structure of high-stable polycrystalline transparent conductive zinc oxide films

Surface morphology and crystalline structure of high-stable zinc oxide films were evaluated by atomic force microscopy, scanning electron microscopy and X-ray diffraction (XRD) measurements. AFM measurement revealed that the higher stable samples have smaller roughness (average roughness and root mean square) parameters than the lower stable samples. Furthermore, in-plane XRD measurement showed that the crystallite size of high stable samples is smaller than that of the low stable samples. These results indicate that the larger surface area and lower film density deteriorates the stability of zinc oxide films through the adsorption and reaction of water or oxygen molecules. They also suggest that we can prepare the high stable zinc oxide transparent electrode films by controlling the surface morphology.     

Fabrication and characterization of magnetic ferrofluids by the co-precipitation way using diglycolic acid

Developing of a simple method for the fabrication of superparamagnetic iron oxide nanoparticles (Nps) is still a challenge for materials scientists. This work reveals a way to fabricate especially stable ferrofluids from spherical Nps of magnetite using the co-precipitation method, for which a new (diglycolic acid) stabilizer was applied. The Nps of the average size of ~7.4–16.5 nm were characterized by means of high resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), selective area electron diffraction (SAED), Raman, FTIR and Mössbauer spectroscopy. The stabilization effect of the diglycolic acid for the growth of superparamagnetic Nps growth was discussed on the basis of experimental results.     

Decorating graphene sheets with Pt nanoparticles using sodium citrate as reductant

In this paper, we proposed a novel and green approach for the synthesis of graphene nanosheets (GNS) and Pt nanoparticles-graphene nanosheets (Pt/GNS) hybrid materials, employing graphene oxide (GO) as precursor and sodium citrate as environmentally friendly reducing and stabilizing agent. The microstructures of GO and Pt/GNS were characterized by high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Raman spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD) and electrochemical measurements. The results confirmed that the uniform size distribution of Pt nanoparticles on the surface of GNS without agglomerates could be easily obtained via using sodium citrate as reductant, moreover the Pt/GNS hybrids exhibited high electrochemical activity.     

Influence of mesoporous substrate morphology on the structural, optical and electrical properties of RF sputtered ZnO layer deposited over porous silicon nanostructure

Morphological, optical and transport characteristics of the RF sputtered zinc oxide (ZnO) thin films over the mesoporous silicon (PS) substrates have been studied. Effect of substrate porosity on the grain growth and transport properties of ZnO has been analyzed. Physical and optical properties of ZnO-PS structures were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), and photoluminescence (PL) spectroscopy. Our experimental results indicate that on changing porosity of the PS substrates, regularity of the spatial distribution of the ZnO nanocrystallites can be controlled. While the morphology and grain size of ZnO depended strongly on the morphology and pore size of the PS substrates, the rectifying factors of the metal semiconductor junction were found to be different by a factor of 3. The deposition of semiconducting oxides on such mesoporous substrates/templates offers the possibility to control their properties and amplify their sensing response.     

Substrate dependent properties of electrodeposited EuTe thin films

In electrodeposition, substrate besides providing mechanical support to the electrodeposit, affects significantly the structural and morphological properties of a film. Electrodeposition and characterization of EuTe thin films onto different substrates such as stainless steel (SS), titanium (Ti), copper (Cu), fluorine-doped tin oxide (F:SnO₂) covered glasses have been described. The deposition potentials have been estimated from the polarization curves. The reaction mechanism is proposed for the formation of EuTe electrodeposits. Preparative parameters such as deposition potential, current density, and deposition time are studied. The films have been characterized by X-ray diffraction, scanning electron microscopy (SEM), atomic force microscopy (AFM) and energy dispersive analysis by X-rays (EDAX) techniques. The electrodeposited EuTe films are polycrystalline on all the substrates with same cubic crystal structure. The SEM studies reveal that the surface morphology is different for the substrates studied. However, no cracks have been observed in the SEM micrographs. The AFM images show large spherical grains supporting the polycrystalline nature of the samples. The EDAX analysis shows that the EuTe films are nearly stoichiometric, slightly rich in tellurium.     

A facile and efficient gas phase process for purifying single-walled carbon nanotubes

Reproducible, low loss and high-yield purification process for single-walled carbon nanotubes (SWNTs) was developed by coupling of oxidation in wet air and treatment with gas phase nitric acid. Oxidation in wet air can burn out the carbonaceous particles and gas phase nitric acid treatment can etch away the catalytic metals. The as-synthesized SWNTs and the purified SWNTs were characterized by field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectrophotometer and thermal gravimetric analysis. It was shown that such a facile and controllable gas phase process for purifying SWNTs can lead to the minimal losses and minimal destruction of SWNTs, thus highly purified SWNTs without amorphous carbon and with very low metal content were obtained.     

Optical measurements of ZnS nanoparticles aqueous solution

We synthesized zinc sulfide (ZnS) nanopowders with size ranging from 2 to 100 nm by a simple, low-cost, and mass production chemical method. The nanoparticles (NPs) were characterized by X-ray powder diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and UV-vis absorption spectroscopy. Our study concerns also the change in the refractive index of deionized water in presence of ZnS nanospheres. We present experimental results on effective index variation of water dispersed ZnS NPs at different wavelengths in visible spectrum.     

Effect of precursor concentration on the growth of zinc oxide nanorod arrays on pre-treated substrates

Well aligned zinc oxide nanorod arrays (ZNAs) synthesized by a simple chemical bath deposition method were fabricated on pre-treated Si substrates. By keeping the molar VI/II ratio constant, the effect of precursor concentration on the growth and optical quality of the ZNAs was investigated. The as-synthesized ZNAs were characterized by field emission scanning electron microscopy (FESEM), x-ray diffraction (XRD) and photoluminescence spectroscopy (PL). FESEM images show that both the diameter and aspect ratio of the ZNAs increase dramatically as the precursor concentration increases. The XRD analysis indicates that all the as-grown ZNAs are crystalline and are preferentially oriented along the c-axis. The high intensity ratio of the UV emission to visible emission in the room temperature PL spectra illustrate that high optical quality ZNAs were produced.     

Surface growth of single-walled carbon nanotubes from ruthenium nanoparticles

In this paper, we report that ruthenium is an active and efficient catalyst for growth of single-walled carbon nanotubes (SWNTs) by a chemical vapor deposition (CVD) process for the first time. High density random and horizontally superlong well-oriented SWNTs on substrate can be fabricated via CH₄ or EtOH as carbon source under suitable conditions. Scanning and transition electron microscopy investigations, Raman spectroscopy and atomic force microscopy measurements show the tubular structure, the high crystallinity, and the properties of the grown nanotubes. The results show that the SWNTs from ruthenium have better structural uniformity with less defects and provides an alternative catalyst for SWNTs growth. The successful growth of SWNTs by Ru catalyst provides new experimental information for understanding the growth mechanism of SWNTs, which may be helpful for their controllable synthesis.     

Nanostructure materials for destruction of warfare agents and eco-toxins prepared by homogeneous hydrolysis with thioacetamide: Part 1—zinc oxide

Zinc sulphide (ZnS) nanoparticles were prepared by homogeneous hydrolysis of zinc sulphate and thioacetamide (TAA) at 80 °C. After annealing at temperature above 400 °C in oxygen atmosphere, zinc oxide (ZnO) nanoparticles were obtained. The ZnS and ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HRTEM), selected area electron diffraction (SAED), by BET and BJH methods used for surface area and porosity determination. The photocatalytic activity of the as-prepared ZnO samples was determined by the decomposition of Orange II in the aqueous solution under UV irradiation of 365 nm of wavelength.     

Large-scale synthesis of ZnO microhollowspheres and their optical properties

ZnO microhollowspheres (MHs) were synthesized by evaporation of a mixture of zinc, graphite, and zinc oxide powders. The microstructures of the resultant MHs have been characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), X-ray diffraction, and photoluminescence (PL). The PL results indicated that the green emission peak at 510 nm of the MHs was higher and broader than that of the nanocombs, which was due to oxygen vacancies formed in the MHs. In addition, the mechanism of ZnO MHs was discussed in detail.