Naproxen drug delivery using periodic mesoporous silica SBA-15

In this paper, we present the release of naproxen from hexagonal periodic mesoporous silica SBA-15, which serves as a drug delivery system. Naproxen, the well-known nonsteroidal anti-inflammatory drug (NSAID), was loaded into the pores of SBA-15 silica modified with aminopropyl groups. The physicochemical properties of the modified sample (A-SBA-15/napro) were compared with the unmodified SBA-15 mesoporous silica loaded with the drug (SBA-15/napro). The kinetic of the naproxen release into the physiological solution was studied. The released amount of naproxen represented 90.7% from the unmodified SBA-15 in 72 h, while from the sample A-SBA-15/napro the released amount represented about 80.9%. The prepared materials were characterized by nitrogen adsorption/desorption, Small angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FT-IR) and the thermoanalytical methods (TG/DTA). Thin layer chromatography (TLC) was used for quantitative determination of the released naproxen.     

Template-directed hydrothermal synthesis of hydroxyapatite as a drug delivery system for the poorly water-soluble drug carvedilol

In order to improve the dissolution rate and increase the bioavailability of a poorly water-soluble drug, intended to be administered orally, the biocompatible and bioactive mesoporous hydroxyapatite (HA) was successfully synthesized. In the present study, mesoporous HA nanoparticles were produced using Pluronic block co-polymer F127 and cetyltrimethylammonium bromide (CTAB) as templates by the hydrothermal method. The obtained mesoporous HA was employed as a drug delivery carrier to investigate the drug storage/release properties using carvedilol (CAR) as a model drug. Characterizations of the raw CAR powder, mesoporous HA and CAR-loaded HA were carried out by the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) spectroscopy, N₂ adsorption/desorption, thermogravimetric analysis (TGA), and UV-VIS spectrophotometry. The results demonstrated that CAR was successfully incorporated into the mesoporous HA host. In vitro drug release studies showed that mesoporous HA had a high drug load efficiency and provided immediate release of CAR compared with micronized raw drug in simulated gastric fluid (pH 1.2) and intestinal fluid (pH 6.8). Consequently, mesoporous HA is a good candidate as a drug carrier for the oral delivery of poorly water-soluble drugs.     

An experimental study on the effect of mesoporous silica addition on ion conductivity of poly(ethylene oxide) electrolytes

Solid polymer electrolyte (SPE) composites, which are composed of poly(ethylene oxide) (PEO), mesoporous silica (SBA-15), and lithium salt were prepared in order to investigate the influence of SBA-15 content on the ionic conductivity of the composites. The ionic conductivity of the SPE composites was monitored by frequency response analyzer (FRA), and the crystallinity of the SPE composites was evaluated by using XRD. As a result, the addition of SBA-15 to the polymer mixture inhibited the growth of PEO crystalline domain, due to the mesoporous structure of the SBA-15. Also, the PEO₁₆LiClO₄/SBA-15 composite electrolytes show an increased ion conductivity as a function of SBA-15 content up to 15 wt.%. These ion conductivity characteristics are dependent on crystallinity with SBA-15 content.     

Construction of a Dual Drug Carrier on the Basis of Hollow Structured Upconversion Nanoparticles for pH‐Responsive Drug Delivery and UCL/MRI Dual Mode Imaging

A series of Gd³⁺ doping hollow upconversion nanoparticles NaYF₄:Yb,Gd,Tm (h‐UNCP) are prepared successfully. The hollow NaYF₄:Yb,Gd,Tm possess excellent upconversion luminescence (UCL) and large longitudinal relativity (r₁ = 128.3 mm ^?1 s^?1), which can be potentially used for UCL/magnetic resonance imaging (MRI) dual mode imaging. On the basis of the optimal h‐UCNP, doxorubicin hydrochloride (DOX) and methotrexate (MTX) are used as drug models to prepare a dual drug carrier. After the encapsulation of DOX on the h‐UCNP, chitosan (CS) is further wrapped and then used to load MTX to obtain a dual drug carrier h‐UCNPs/DOX/CS/MTX. The pH responsive release of DOX and MTX is discussed. The MTX release climbs from 33% to 100% by regulating the pH from 5.8 to 7.4. The DOX release is different at different pH conditions. The synergistic effect of DOX and MTX on the cancer cells is confirmed by cell viability. The h‐UCNPs/DOX/CS/MTX are tracked by cells UCL imaging and vivo MRI imaging. The excellent performance of UCL imaging and positive MRI images demonstrates that h‐UCNPs/DOX/CS/MTX can be used for UCL/MRI dual mode imaging. All the results show the potential application of h‐UCNPs/DOX/CS/MTX in pH responsive release and UCL/MRI dual imaging.     

Properties of SBA-15 modified by iron nanoparticles as potential hydrogen adsorbents and sensors

SBA-15-Fe was synthesized via the incorporation of Fe⁰ nanoparticles (Fe(0)-Nps) in the mesoporous channels. Electron microscopy and X-ray diffraction showed that dispersion of fine iron NPs occurs mainly inside the channels of SBA-15, producing a slight structure compaction. This was accompanied by a significant improvement of both the affinity towards hydrogen and electrical conductivity, as supported by hydrogen adsorption tests and impedance measurements. CO₂ thermal programmed desorption measurements revealed an attenuation of the acid character of the solid surface. This was explained in terms of strong iron interaction with the lattice oxygen atoms that reduces the SiO–H bond polarity. The close vicinity of fine Fe(0)-Nps combined with the large pore size of SBA-15 appear to contribute to a synergistic improvement of the electrical conductivity. The results reported herein open new prospects for SBA-15 as potential adsorbents for hydrogen storage and carriers for hydrogen sensors. The use of iron in lieu of noble metals for designing such materials is a novelty, because such applications of iron-loaded silica have not been envisaged so far due to the high reactivity of iron towards air and water. The development of such technologies, if any, should address this issue.     

Adsorptive removal of anionic dyes by modified nanoporous silica SBA-3

Batch sorption experiments were carried out to remove dyes, methyl orange (MO), orange G (OG) and brilliant red X-3B (X-3B), from their aqueous solutions using a mesoporous silica SBA-3 as an adsorbent. The effect of surfactant template in SBA-3 on the removal of OG, MO and X-3B was investigated. Experiments were carried out to investigate the influence of contact time, initial concentration, pH, and adsorbent dosage on the adsorption performance. The adsorption results of anionic dyes on the uncalcined SBA-3 (noted as SBA-3) were compared with those of the calcined SBA-3 (noted as C-SBA-3). The uncalcined SBA-3 adsorbent has a large adsorption capacity and a strong affinity for the anionic dyes. Langmuir, Freundlich and Temkin isotherms were employed to model the experimental results, from which the Freundlich isotherm exhibited the most appropriate to predict the same. Freundlich isotherm exhibited the most appropriate to predict the experimental results. The kinetic data were also analyzed through pseudo-first-order and pseudo-second-order models. The pseudo-second-order kinetic model well depicted the kinetics of dyes adsorption on mesoporous SBA-3.     

Porous FeVO4 nanorods: synthesis,characterization, and gas-sensing properties toward volatile organic compounds

Herein, we describe a multifunctional anti-cancer prodrug system based on water-dispersible carbon nanotube (CNT); this prodrug system features active targeting, pH-triggered drug release, and photodynamic therapeutic properties. For this prodrug system (with the size of ~100–300 nm), an anti-cancer drug, doxorubicin (DOX), was incorporated onto CNT via a cleavable hydrazone bond; and a targeting ligand (folic acid) was also coupled onto CNT. This prodrug can preferably enter folate receptor (FR)-positive cancer cells and undergo intracellular release of the drug triggered by the reduced pH. The targeted CNT-based prodrug system can cause lower cell viability toward FR-positive cells compared to the non-targeted ones. Moreover, the CNT carrier exhibits photodynamic therapeutic (PDT) action; and the cell viability of FR-positive cancer cells can be further reduced upon light irradiation. The dual effects of pH-triggered drug release and PDT increase the therapeutic efficacy of the DOX–CNT prodrug. This study may offer some useful insights on designing and improving the applicability of CNT for other drug delivery systems.

     

Nanoparticle carriers based on copolymers of poly(<Emphasis Type="SmallCaps">l</Emphasis>-aspartic acid co-<Emphasis Type="SmallCaps">l</Emphasis>-lactide)-1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine for drug delivery

A novel poly(l-aspartic) derivative (PAL-DPPE) containing polylactide and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) segments has been successfully synthesized. The chemical structures of the copolymers were confirmed by Fourier-transform infrared spectroscopy (FTIR), NMR (¹H NMR, ¹³C NMR, ³¹P NMR), and thermogravimetric analysis (TGA). Fluorescence spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM) confirmed the formation of micelles of the PAL-DPPE copolymers. In order to estimate the feasibility as novel drug carriers, an anti-tumor model drug doxorubicin (DOX) was incorporated into polymeric micelles by double emulsion and nanoprecipitation method. The DOX-loaded micelle size, size distribution, and encapsulation efficiency (EE) were influenced by the feed weight ratio of the copolymer to DOX. In addition, in vitro release experiments of the DOX-loaded PAL-DPPE micelles exhibited that faster release in pH 5.0 than their release in pH 7.4 buffer. The poly(l-aspartic) derivative copolymer was proved to be an available carrier for the preparation of micelles for anti-tumor drug delivery.     

Synthesis and characterization of MnWO4 nanoparticles encapsulated in mesoporous silica SBA-15 by fast microwave-assisted method

The MnWO₄ nanoparticles encapsulated in mesoporous silica (MnWO₄/SBA-15) was successfully synthesized by a fast microwave-assisted method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption–desorption isotherm, and Fourier transform infrared spectroscopy (FTIR). Our results showed that the MnWO₄/SBA-15 nanocomposites have the ordered hexagonal meso-structure of SBA-15, indicating MnWO₄ nanoparticles were successfully distributed into the channels of SBA-15. The size of MnWO₄ nanoparticles in SBA-15 is significantly smaller than the size of MnWO₄ nanoparticles prepared without SBA-15, indicating that the MnWO₄/SBA15 nanocomposites would be very promising for improving photocatalytic activity of MnWO₄ nanoparticles.     

Effect of silane-functionalized mesoporous silica SBA-15 on performance of PEO-based composite polymer electrolytes

Silane-functionalized mesoporous silica SBA-15 particles with ultra-high specific surface area and large pore size were used as fillers in PEO-based solid electrolytes. FT-IR results confirmed the silane functionalization of SBA-15. Ionic conductivity and lithium ion transference number of the composite polymer electrolytes were found to simultaneously reach a high value of 5 wt.% silane-functionalized SBA-15 introduced in the matrix. It may be due to the combination effects of the unique structure of SBA-15 (i.e., ultra-high specific surface area and large pore size), the particularly functionalized surface of SBA-15 to promote fast ion transfer, and the good dispersion and compatibility of silane-functionalized SBA-15 in the composite polymer electrolytes. The results suggest an alternative way to improve the performance of solid polymer electrolytes.     

介孔二氧化硅基导电聚合物复合材料热导率的实验研究

本文首先制备并表征了介孔二氧化硅SBA-15、 填充导电聚合物的复合材料PANI/SBA-15和复合材料PPy/SBA-15, 并建立双流计实验台开展了材料压片情况下的热导率研究. 在测量得到复合材料热导率的基础上, 引入当量孔径, 结合测量孔径对 PANI/SBA-15和PPy/SBA-15复合材料热导率随填充量的变化进行了定性分析. 分析表明: PANI/SBA-15和PPy/SBA-15复合材料的热导率比基材SBA-15的热导率大得多; 在相同的测量孔径和当量孔径情况下, PANI/SBA-15复合材料的热导率比PPy/SBA-15复合材料的热导率大; 导电聚合物填充到复合材料孔道内和孔道外都有助于热导率的提高, 填充到孔道内比填充到孔道外对热导率提高的贡献更大.     

Studies of intrawall porosity in the hexagonally ordered mesostructures of SBA-15 by small angle X-ray scattering and nitrogen adsorption

Ordered mesoporous silicas (OMSs) such as SBA-15 (p6mm symmetry group) synthesized in the presence of block copolymers containing poly(ethylene oxide) blocks possess irregular complementary pores in the walls of ordered mesopores. The X-ray scattering caused by this complementary porosity contributes to the background of the SAXS patterns. This work shows the possibility of using the SAXS data for the study of intrawall channels interconnecting ordered cylinders in SBA-15. The proposed SAXS analysis was tested by using a series of SBA-15 samples obtained at different temperatures of hydrothermal treatment (from 60 to 180 °C). The structural modelling of the SAXS patterns recorded for a series of SBA-15 samples was performed by using the continuous density function (CDF) technique in combination with the derivative difference minimization (DDM) method of full-profile refinement. This method is well suited for extraction of the background curves from the SAXS patterns. The resulting smooth background curves were analyzed by the well-known method in the SAXS theory used for evaluation of heterogeneity distributions, which in this case characterize the intrawall complementary porosity. A relatively good agreement has been observed between the data obtained by SAXS and nitrogen adsorption analysis. The SAXS analysis is sufficiently sensitive for examination of heterogeneous microporosity in SBA-15 materials. The average diameter of intrawall pores for the SBA-15 sample obtained at 60 °C was only about 1.4 nm. However, this diameter increased with the increasing temperature of hydrothermal treatment; namely, it was 1.5, 1.8, 2.6, 2.6, 3.5 and 5.2 nm for the SBA-15 samples hydrothermally treated at 80, 100, 120, 140, 160 and 180 °C, respectively.     

Applicability of classical methods of pore size analysis for MCM-41 and SBA-15 silicas

Two most popular ordered mesoporous silicas, MCM-41 and SBA-15, exhibiting uniform mesopores of approximately cylindrical shapes, have been used as model adsorbents for verification, improvement and/or development of adsorption-based methods for characterization nanoporous materials. While the applicability of the classical methods for pore size analysis was widely examined by employing MCM-41 materials, the large-pore materials such as SBA-15 did not find adequate usage for this type of studies. The current work addresses the issue of applicability of classical methods such as Barrett-Joyner-Hallenda (BJH) and Broekhoff-de Boer (BdB) methods for pore size analysis of mesoporous silicas by using MCM-41 and SBA-15 materials as model adsorbents. In addition, the Kruk-Jaroniec-Sayari (KJS) method, which is based on the BJH algorithm and experimental relations for the pore width and statistical film thickness, is discussed too. While the MCM-41 materials cover the range of small mesopores (about 2-7 nm), the inclusion of SBA-15 materials allowed us to examine the range of the pore diameters up to about 12 nm. The high quality MCM-41 and SBA-15 samples are used to discuss the applicability and limitations of the aforementioned characterization methods and to propose some recommendations for pore size analysis of these materials.     

Characterization and scanning electron microscopic investigation of crosslinked freeze dried gelatin matrices for study of drug diffusivity and release kinetics

Drug delivery is a promising technique to enhance the therapeutic efficacy of the drug. However, properties of carrier materials require intense improvement for effective transport of drug molecules. In the current study, attempts have been made to develop freeze dried gelatin matrices cross linked with genipin at various temperatures (5°C, 15°C and 25°C) prior to freeze-drying (-80°C). The freeze dried matrices thus obtained at the said temperatures are characterized for crosslinking density, compression strength, swelling behaviors. The matrix crosslinked at 25°C showed highest Flory-Rehner crosslinking density (467 ± 46) (p<0.05), highest compressive strength (12.36 ± 0.12) (p<0.05) and lowest equilibrium water content. In this context, scanning electron microscopy (SEM) was performed to study the surface morphology (size and shape of pores) of the crosslinked matrices. These images were further processed for quantitative analysis of morphological features, viz., areas, radius, ferret diameter, length of major and minor axis and eccentricity using MATLAB toolboxes. These quantitative analyses correlate transport and the release kinetics of model anti-inflammatory drug (indomethacin) from crosslinked matrices in vitro to tune as a controllable delivery system. The diffusional exponent (n) for all constructs ranging from 0.61 to 0.69 (p<0.05) (0.45相似文献   

Antioxidant and anticancer activities of gallic acid loaded sodium alginate microspheres on colon cancer

Polyphenols found in fruits and vegetables are of great interest due to their health benefits. Gallic acid (GA) is an antioxidant with cytotoxic effects. Microspheres are drug carrier systems, where the active substance is trapped in matrix. A controlled release profile is aimed at the target region by preserving the loss of substance and activity. In this study, GA containing microspheres were formed with sodium alginate (NaAlg) in formulations with different ratios. The arrest efficiencies ranged between 11.26 and 72.64%. Release studies were performed at pH 7.4. Optimum conditions were determined as GA/NaAlg ratio 1/8. The microspheres were found to arrest GA and exhibit a controlled release profile. Microspheres were characterized by scanning electron microscope (SEM), differential scanning calorimetry (DSC), X-Ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR) analysis. GA retained its antioxidant activity determined by DPPH (2,2-diphenyl-1-picrylhydrazyl) method and anticancer activity on Caco-2 cells. Further studies are necessary on GA-loaded NaAlg microspheres which have high potential to be used in adjunct and complementary therapies.     

CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15

Adsorption of pure CO₂ on SBA-15 impregnated with branched polyethyleneimine (PEI) has been studied. Materials were prepared by impregnating the pore surface of SBA-15 mesoporous silica with different amounts of branched PEI (10, 30, 50 and 70 wt%). Textural properties, elemental analysis and low angle XRD measurements of the prepared samples showed a progressive pore filling of SBA-15 as PEI loading was increased. Pure CO₂ adsorption isotherms on these modified SBA-15 materials were obtained at 45 °C, showing high adsorption efficiency for CO₂ removal at 1 bar. Chemisorption of CO₂ on amino sites of the modified SBA-15 seems to be the main adsorption mechanism. PEI content of impregnated SBA-15 influences the adsorption capacity of the material, being a relevant variable for CO₂ removal by adsorption. Temperature effect on adsorption was also studied in the range 25-75 °C, showing that temperature strongly influences CO₂ adsorption capacity. Adsorption capacity was also tested after regeneration of the PEI-impregnated SBA-15 materials. Our results show that these branched PEI-impregnated materials are very efficient even at low pressure and after several adsorption-regeneration cycles.     

Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption

Mesoporous SBA-15 was synthesized using rice husk ash (RHA) as the silica source and their defective Si-OH groups were grafted with tris(2-aminoethyl) amine (TREN) dendrimers generation through step-wise growth technique. The X-ray diffraction (XRD) and nitrogen adsorption/desorption results of parent SBA-15 obtained from RHA, suggests its resemblance with SBA-15 synthesized using conventional silica sources. Furthermore, the nitrogen adsorption/desorption results of SBA-15/TREN dendrimer generations (G1-G3) illustrates the growth of dendrimer inside the mesopores of SBA-15 and their CO₂ adsorption capacity was determined at 25 °C. The maximum CO₂ adsorption capacity of 5-6 and 7-8 wt% over second and third dendrimer generation was observed which is discernibly higher than the reported melamine and PAMAM dendrimers. The experimental CO₂ adsorption capacity was found to be less than theoretically calculated CO₂ adsorption capacity due to inter and intra molecular amidation as result of steric hindrance during the dendrimer growth. These SBA-15/TREN dendrimer generations also exhibit thermal stability up to 350 °C and CO₂ adsorption capacity remains unaltered upon seven consecutive runs.     

Optimization of Release Conditions of Alzheimer's Drug Donepezil Hydrochloride from Sodium Alginate/Sodium Carboxymethyl Cellulose Blend Microspheres

Microspheres of blends of sodium alginate (NaAlg) and sodium carboxymethyl cellulose (NaCMC) were prepared by a water-in-oil (w/o) emulsion crosslinking method and used for the release of donepezil hydrochloride (DP), which is an Alzheimer's drug. The microspheres were characterized with Fourier transform infrared spectroscopy (FTIR), differantial scanning calorimetry (DSC), and scanning electron microscopy (SEM). The microsphere characteristics, including DP entrapment efficiency, particle size, equilibrium swelling degree (ESD), and DP release kinetics, were determined. The effects of the preparation conditions, including the NaAlg/NaCMC (w/w) ratio, drug/polymer (w/w) ratio, cross-linker concentration and time of exposure to the cross-linker, on the release of DP were investigated for successive gastrointestinal tract pH values of 1.2, 6.8, and 7.4 at 37°C. The release of DP increased with the increase in NaAlg/NaCMC (w/w) ratio and drug/polymer (d/p) ratio, while it decreased with increasing extent of cross-linking. The optimum DP release was obtained as 99.13% for a NaAlg/NaCMC (w/w) ratio of 2/1, d/p ratio of 1/4, CaCl₂ concentration of 5% and crosslinking time of 30 min. It was also observed from release results that DP release from the microspheres through the external medium was higher at low pH (1.2) values than that at high pH (6.8 and 7.4) values. The DP release of the microspheres followed either Fickian transport below a value of n < 0.5 or anomalous transport (n = 0.5–1.0).     

Characterization of the synthesis and reactivity behavior of nanostructured vanadia model catalysts using XPS and vibrational spectroscopy

Nanostructured vanadia model catalysts, i.e., highly dispersed vanadium oxide supported on mesoporous silica SBA-15 (VO_x/SBA-15), were prepared. The mechanism for the synthesis of VO_x/SBA-15 was elucidated by detailed characterization of the individual synthesis steps using XPS and vibrational spectroscopy. The resulting surface vanadium oxide species (0-2.3 V/nm²), grafted on the inner pores of the SBA-15 silica matrix, consists of tetrahedrally coordinated vanadia as inferred from UV-VIS- and Raman spectroscopy. The prepared vanadia model catalysts were tested in the partial oxidation of methanol to formaldehyde yielding high formaldehyde selectivities of 94% at 350 °C. XPS and Raman analysis of the catalyst after reaction reveal the presence of methoxy as well as a significant amount of carbonaceous species on the surface. Our results demonstrate that a detailed understanding of partial oxidation reactions requires the combination of complementary spectroscopic techniques ultimately within one experimental set-up.