Influence of activated carbon surface acidity on adsorption of heavy metal ions and aromatics from aqueous solution

Adsorption of toxic heavy metal ions and aromatic compounds onto activated carbons of various amount of surface C-O complexes were examined to study the optimum surface conditions for adsorption in aqueous phase. Cadmium(II) and zinc(II) were used as heavy metal ions, and phenol and nitrobenzene as aromatic compounds, respectively. Activated carbon was de-ashed followed by oxidation with nitric acid, and then it was stepwise out-gassed in helium flow up to 1273 K to gradually remove C-O complexes introduced by the oxidation. The oxidized activated carbon exhibited superior adsorption for heavy metal ions but poor performance for aromatic compounds. Both heavy metal ions and aromatics can be removed to much extent by the out-gassed activated carbon at 1273 K. Removing C-O complexes, the adsorption mechanisms would be switched from ion exchange to Cπ-cation interaction for the heavy metals adsorption, and from some kind of oxygen-aromatics interaction to π-π dispersion for the aromatics.     

Poly (3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) Zr(IV) phosphate composite cation exchanger : sol-gel synthesis and physicochemical characterization

An organic-inorganic composite cation exchanger poly (3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) Zr(IV) phosphate was prepared by the sol-gel method for removal of cadmium, a toxic heavy metal pollutant causing adverse effects on human health. The synthesized material was characterized by various techniques such as thermo gravimetric analysis/differential thermal analysis/differential thermo gravimetry (TGA/DTA/DTG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). Organic polymer PEDOT:PSS binds with the inorganic counterpart and prevents the leaching of the inorganic parts, hence PEDOT:PSS Zr(IV) phosphate composite cation exchanger has improved ion exchange capacity than inorganic ion exchanger. The composite cation exchanger was found selective towards Cd(II) ions. The nature and composition of contacting solvents influence the selectivity of composite cation exchanger. The composite cation exchanger may be used for the removal of cadmium a toxic heavy metal ion.     

Dendrimer-conjugated magnetic nanoparticles for removal of zinc (II) from aqueous solutions

Dendrimers are novel nanostructure materials that possess a unique three-dimensional molecular configuration. They have high adsorption capacities of heavy metals. Dendrimer-conjugated magnetic nanoparticles (Gn-MNPs) combining the superior adsorbent of dendrimers with magnetic nanoparticles (MNPs) have been developed for effective removal and recovery of Zn(II). In this study, the Gn-MNPs were synthesized, characterized, and examined as reusable adsorbents of Zn(II). Characterization conducted by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and elemental analysis revealed that dendrimers were successfully coated onto the surface of MNPs made of magnetite (Fe₃O₄). The pH effect studies indicate the Zn(II) adsorption with Gn-MNPs is a function of pH. The adsorption efficiency increases with increasing pH. At pH less than 3, Zn(II) is readily desorbed. Hence, the Gn-MNPs can be regenerated using the diluted HCl aqueous solution (0.1 M) where Zn(II) can be recovered in a concentrated form. It was found that the Gn-MNPs underwent 10 consecutive adsorption–desorption processes still retained the original removal capacity of Zn(II). The adsorption data were fitted well with both Langmuir and Freundlich isotherms. The maximum adsorption capacity determined by the Langmuir model is 24.3 mg/g at pH 7 and 25°C. A synergistic effect between the complexation reaction and the electrostatic interaction may account for the overall performance of Gn-MNPs.     

Modified polypropylene fabrics and their metal ion sorption role in aqueous solution

Polypropylene non-woven fabrics were grafted with glycidyl methacrylate by the electron beam irradiation method and the introduced epoxide rings were chemically conversed to hydroxyl and thiol groups. The modified polypropylene fabrics showed sufficient hydrophilicity to adsorb the metal ions from the aqueous solutions. The modified fibers were examined as adsorbents for metal ions dissolved in seawater and its model solutions at various conditions. The amount of ions adsorbed on the fabrics was determined by a sequential plasma spectrometry. The modified polypropylene fabrics adsorbed extremely high amount of Au(III) and Hg(II) ions. The equilibrium adsorption of Au(III) was almost not disturbed, even if Cu(II), Cd(II), Pb(II) and the other ions coexisted in the same aqueous solution. Nowadays, the most widely advantages of this technique are the recovery of metal ions dissolved in water and the treatment of industrial wastewater systems.     

Ultrasound-assisted adsorption of copper(II) ions on hazelnut shell activated carbon

The present study was aimed to removal of Cu(II) ions from aqueous solution by ultrasound-assisted adsorption onto the granular activated carbon obtained from hazelnut shells. The attention was focused on modeling the equilibrium and kinetics of Cu(II) adsorption onto the granular activated carbon. The granular activated carbon was prepared from ground dried hazelnut shells by simultaneous carbonization and activation by water steam at 950 °C for 2 h. Adsorption isotherm data were better fitted by the Langmuir model than the Freundlich model in both the absence and the presence of ultrasound. The maximum adsorption capacity of the adsorbent for Cu(II), calculated from the Langmuir isotherms, in the presence of ultrasound (3.77 mmol/g) is greater than that in the absence of ultrasound (3.14 mmol/g). The adsorption process in the absence and the presence of ultrasound obeyed to the pseudo second-order kinetics. The removal of Cu(II) ions was higher in the presence of ultrasound than in its absence, but ultrasound reduced the rate constant. The intraparticular diffusion model indicated that adsorption of Cu(II) ions on the granular activated carbon was diffusion controlled as well as that ultrasound promoted intraparticular diffusion.     

Optimization parameters for adsorption and desorption of Zn(II) and Se(IV) using rice husk ash: kinetics and equilibrium

An attempt at the use of rice husk ash, an agricultural waste, as an adsorbent of Zn(II) and Se(IV) from their aqueous solution is studied. Studies are carried out as a function of contact time, metal ion concentration, adsorbent dose, and pH at 25 °C. Its adsorption capability and adsorption rate are considerably higher and faster for Zn(II) ions than for Se(IV) ions. Zn(II) adsorption was found fast reaching equilibrium within ≃1 h while Se(IV) adsorption was slow reaching equilibrium within ≃100 h. The Bangham equation can be used to express the mechanism for adsorption. The experimental isotherm data were analyzed using Langmiur, Freundlich, and Temkin models. Desorption experiments were carried out using different media with a view to regenerate the spent adsorbent and to recover the adsorbed metal ion.     

Graphene nanocomposites of CdS and ZnS in effective water purification

The present work deals with syntheses of CdS/graphene and ZnS/graphene nanocomposites by hydrothermal reaction of graphene oxide and morpholine-4-carbodithioate complex of Cd and Zn, respectively. The corresponding nanocomposites has been investigated separately as photocatalyst in the decomposition of methylene blue in the presence of UV light and also as adsorbents in the removal of Cd(II) and Pb(II) ions in contaminated water. These studies have established that CdS/graphene and ZnS/graphene are effective photocatalyst as well as effective adsorbents in the removal of Cd(II) and Pb(II) ions to an extent of 97 and 99 % by ZnS/graphene and CdS/graphene nanocomposite, respectively, under 1 g L^?1 of adsorption dose and at pH ~7. Further studies also established Langmuir model befitting for the adsorption of Pb(II) and Cd(II) ions on CdS/graphene and ZnS/graphene, respectively. The presence of interfering ions on extent of Cd(II) and Pb(II) removal has also been reported.     

Water vapor adsorption onto activated carbons prepared from cattle manure compost (CMC)

Activated carbons were prepared from cattle manure compost (CMC) using zinc chloride activation. The structural and surface chemical characteristics of CMC-based activated carbons were determined by N₂ adsorption-desorption and Boehm titration, respectively. The water vapor adsorption properties of the prepared activated carbons with various pore structure and surface nature were examined, and the mechanism of water adsorbed onto activated carbon was also discussed. The results show that the adsorption of water vapor on carbons begins at specific active sites at low relative humidity (RH), followed by micropore filling at medium RH through the formation of pentamer cluster of water molecules in the narrow micropores. The water vapor adsorption capacity of activated carbon is predominantly dependent on its pore volume and surface area. Although capillary condensation is not the mechanism for water adsorption onto activated carbon, water can adsorb on narrow mesopore to some extent.     

Application of bifunctional Saccharomyces cerevisiae to remove lead(II) and cadmium(II) in aqueous solution

A magnetic adsorbent, EDTAD-functionalized Saccharomyces cerevisiae, has been synthesized to behave as an adsorbent for heavy metal ions by adjusting the pH value of the aqueous solution to make carboxyl and amino groups protonic or non-protonic. The bifunctional Saccharomyces cerevisiae (EMS) were used to remove lead(II) and cadmium(II) in solution in a batch system. The results showed that the adsorption capacity of the EMS for the heavy metal ions increased with increasing solution pH, and the maximum adsorption capacity (88.16 mg/g for Pb²⁺, 40.72 mg/g for Cd²⁺) at 10 °C was found to occur at pH 5.5 and 6.0, respectively. The adsorption process followed the Langmuir isotherm model. The regeneration experiments revealed that the EMS could be successfully reused.     

Comparison of Activated Carbon,Multiwalled Carbon Nanotubes,and Cadmium Hydroxide Nanowire Loaded on Activated Carbon as Adsorbents for Kinetic and Equilibrium Study of Removal of Safranine O

Activated carbon (AC), multiwalled carbon nanotube (MWCNT), and cadmium hydroxide nanowire loaded on activated carbon (Cd(OH)₂-NW-AC) have been used for the removal of safranine O (SO) from wastewater. The effects of various parameters including pH, temperature, concentration of the dye, amount of adsorbents, and contact time on the SO adsorption efficiency for all adsorbents has been investigated. Graphical correlation of fitting experimental data to various adsorption isotherm models like those of Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich for all adsorbents have been calculated. It was found that safranine O adsorption on all adsorbents was endothermic and feasible in nature. Fitting the experimental data to different kinetic models suggests that the adsorption process follows pseudo-second-order kinetics with involvement of the particle diffusion mechanism.     

ICP-OES研究活性炭无纺布对镉的吸附

重金属污染是一个相当严重的环境问题。镉具有很强的生物毒性和不可降解性,对生态环境和人体健康有极大威胁,被列为优先控制污染物。环境中镉的主要污染源是电镀、采矿和化学工业等部门的废水,如何简单高效去除水中的镉,有重要的社会意义和经济意义。目前,水中重金属的去除方法有化学沉淀、膜分离、离子交换、吸附、电解等,其中吸附法因简单高效而广泛应用。活性炭纤维是一种新型活性炭,孔径小且均匀,表面官能团发达,吸附性能好,逐步应用于水处理领域。以电感耦合等离子体光谱为检测手段,佐以比表面积分析,X射线衍射,元素分析和傅里叶变换红外光谱,研究比较了三种活性炭纤维(纤维炭网、活性炭无纺布、活性炭纤维毡)的结构特点及其对水中镉的吸附性能。三种活性炭纤维结构基本类似,具有较发达的孔隙结构。活性炭无纺布极性较强,表面有丰富的羟基、羧基、醛基等含氧官能团,对水中镉的吸附作用最大。因此,选择活性炭无纺布为吸附剂进行后续实验。研究了活性炭无纺布吸附镉的影响因素,如溶液pH,吸附时间等。溶液pH影响吸附剂表面电荷及水中镉的存在状态。水中镉的去除效率随溶液初始pH的增大而增大,在较低pH时,吸附剂与Cd2+间存在静电斥力,同时H+和Cd2+存在竞争吸附,pH>9时,镉的去除是吸附与沉淀协同作用的结果,选择pH为6～7。在吸附的初始阶段,活性炭无纺布对Cd2+的吸附量迅速增加,10 min时,吸附率达到72%。随着吸附位点逐渐被Cd2+所填充,吸附速率逐渐变慢,300 min时,吸附容量基本无变化,吸附趋于平衡。优化了镉的吸附条件后,进行等温吸附实验和动力学实验。结果表明,25 ℃时,吸附时间为300 min,pH 6.0条件下,当镉的平衡浓度在20.00 mg·L-1时,活性炭无纺布对镉的单位质量吸附量和单位比表面积吸附量分别是3.04 mg·g-1和0.035 mg·m-2。用Langmuir方程(R2=0.997, K_L =1.796 L·mg-1)和Freundich方程(R2=0.895, K_F=0.918 L·mg-1, n=2.12)拟合活性炭无纺布对镉的等温吸附数据,Langmuir方程计算的理论吸附量为3.07 mg·g-1,与实验值相当,并且线性系数更高,说明该体系的吸附符合Langmuir方程,主要为单分子层吸附。Langmuir分离因子介于0和1之间,表明活性炭无纺布对镉的吸附容易进行。用准一级动力学方程、准二级动力学方程、颗粒内扩散方程和Elovich方程四种动力学模型拟合吸附过程。在吸附的前5 min,镉在活性炭无纺布上的吸附符合颗粒内扩散方程(R2=0.985),吸附主要受颗粒内扩散控制。在吸附的5～300 min,颗粒内扩散方程拟合较差。整个吸附过程符合准二级动力学方程(R2=0.999,k₂=0.367 g·mg-1·min-1),Elovich方程(R2=0.981,a=0.271 mg·g-1, b=0.083 mg·g-1·(lg min)-1)和准一级动力学方程(R2=0.927,k₁=0.008 8 min-1)次之,颗粒内扩散方程(R2=0.785)最差。活性炭无纺布对镉的吸附过程是一种化学作用为主的吸附过程。对5.00 mg·L-1含镉水样,活性炭无纺布投放量为10 g·L-1时,吸附后水中镉的浓度小于0.10 mg·L-1,符合《污水综合排放标准》(GB 8978-1996)。活性炭无纺布可同时吸附镉,铜,铅,铬等重金属离子,选择性较差。但在电镀、采矿等实际废水中重金属种类复杂,适当提高吸附剂投放量,可同时去除多种重金属。利用活性炭无纺布吸附处理含镉水样,处理效果好、操作简单,可以作为去除水中镉的吸附剂,为含镉废水的处理提供了技术支持和理论基础。     

含硫磷酸钙纳米颗粒的制备及对铅离子的高效选择性去除

用一种简易共沉淀法制备了非晶含硫磷酸钙（SCP）材料,实现硫原子原位引入磷酸钙纳米颗粒中,并研究了其对Pb（II）的吸附特性和机理。与羟基磷灰石相比,SCP对Pb（II）的去除性能显著增强,在10 min内能快速将20 ppm的Pb（II）溶液降低至饮用水标准下。由Langmuir吸附等温线模型计算可知,SCP对Pb（II）的最大饱和吸附量高达1720.57 mg/g,这个数值远远超过以往所报道的绝大部分吸附剂材料。在竞争离子Ni（II）,Co（II）,Zn（II）和Cd（II）共存的条件下,SCP还表现出对Pb（II）的选择性去除。研究表明,SCP对Pb（II）超高的去除效率和优异的亲和力归因于其可通过溶解沉淀和离子交换反应在其表面形成棒状的羟基磷酸铅晶体,以及形成沉淀物硫化铅。SCP以其对Pb（II）快速、高效和优异选择性成为在实际铅污染治理中的理想材料.     

Synthesis of thiol-functionalized MCM-41 mesoporous silicas and its application in Cu(II), Pb(II), Ag(I), and Cr(III) removal

Thiol-functionalized MCM-41 mesoporous silicas were synthesized via evaporation-induced self-assembly. The mesoporous silicas obtained were characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The products were used as adsorbents to remove heavy metal ions from water. The mesoporous silicas (adsorbent A) with high pore diameter (centered at 5.27 nm) exhibited the largest adsorption capacity, with a BET surface area of 421.9 m² g^?1 and pore volume of 0.556 cm³ g^?1. Different anions influenced the adsorption of Cu(II) in the order NO₃ ^? < OAc^? < SO₄ ^2? < CO₃ ^2? < Cit^? < Cl^?. Analysis of adsorption isotherms showed that Cu²⁺, Pb²⁺, Ag⁺, and Cr³⁺ adsorption fit the Redlich–Peterson nonlinear model. The mesoporous silicas synthesized in the work can be used as adsorbents to remove heavy metal ions from water effectively. The removal rate was high, and the adsorbent could be regenerated by acid treatment without changing its properties.     

Biomass waste-derived activated carbon for the removal of arsenic and manganese ions from aqueous solutions

The goal of this study is to investigate the preparation of low-cost activated carbon from bean pods waste and to explore their potential application for the removal of heavy metals from aqueous solutions. Conventional physical (water vapor) activation was used for synthesizing the adsorbent. The obtained carbon was employed for the removal of As (III) and Mn (II) from aqueous solutions at different initial concentrations and pH values. Adsorption for both ions follows Langmuir-type isotherm, the maximum loading capacities for arsenic (III) and Mn (II) ions being 1.01 and 23.4 mg g⁻¹, respectively. According to the experimental data, it can be inferred that the basic character of the surface, i.e. the high content of basic groups, favors adsorption of ions. Arsenic adsorption capacity on the carbon obtained from agricultural waste was found to be similar to this of more expensive commercial carbons showing high adsorption capability. Regarding manganese adsorption, herein obtained carbon presented higher uptake adsorption than that of activated carbons reported in the literature.     

Radiative lifetimes in Zn(II), Cd(II) and Hg(II) measured by fast-beam zero-field level-crossing technique

The zero-field level-crossing technique has been used to determine radiative lifetimes of excited states in singly ionized zinc, cadmium, and mercury. The excited levels in Zn(II), Cd(II) and Hg(II) were populated by collisions between fast ions and helium gas. Particular attention has been paid to the systematic errors occurring in radiative lifetimes by this technique. The results are compared with the lifetimes obtained by beam-foil, phase-shift, delayed-coincidence techniques and theoretical calculations.     

Vermiculite as an exchanger for copper(II) and Cr(III) ions,kinetic studies

The adsorption of Cu(II) and Cr(III) ions by pure clay mineral, vermiculite, was examined in aqueous solution with respect to the adsorbent dose, initial metal ion concentration, pH, and contact time. The studies showed that vermiculite can be used as an adsorbent material for the moderate removal of Cr(III) and Cu(II) from aqueous solutions. Lagergren first-order, pseudo-second-order, and intraparticle diffusion models were used to describe the kinetic data. The kinetics of adsorption indicates that the process fitted well the intraparticle diffusion model.     

Cu,Zn-SOD在银电极上的原位表面增强Raman光谱

本文应用原位共焦拉曼光谱技术观察了Cu ,Zn -SOD分子在经表面增强处理后的银电极上 ,吸附状态随电位跃迁变化的过程。结果表明在 -0 2V～ 0 1V的电位区间内 ,Cu,Zn -SOD分子经由羧酸根离子吸附于银电极表面 ,而在 0 2～ 0 4V电位区间内发生脱附 ,表面吸附的物种改变为缓冲溶液中的磷酸根离子。上述结果为SOD分子在固体电极表面电子传递机制的探索提供了依据。     

Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> ternary nanocomposite for removal of Cu (II) and methylene blue

In this work, highly activated graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite adsorbent was prepared from a simple hydrothermal route by using ferrous sulfate as precursor. For this purpose, the graphene oxide/multiwalled carbon nanotube architectures were formed through the π-π attractions between them, followed by attaching Fe₃O₄ nanoparticles onto their surface. The structure and composition of as-prepared ternary nanocomposite were characterized by XRD, FTIR, XPS, SEM, TEM, Raman, TGA, and BET. It was found that the resultant porous graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite with large surface area could effectively prevent the π-π stacking interactions between graphene oxide nanosheets and greatly improve sorption sites on the surfaces. Thus, owing to the unique ternary nanocomposite architecture and synergistic effect among various components, as-prepared ternary nanocomposite exhibited high separation efficiency when they were used to remove the Cu (II) and methylene blue from aqueous solutions. Furthermore, the adsorption isotherms of ternary nanocomposite structures for Cu (II) and methylene blue removal fitted the Langmuir isotherm model. This work demonstrated that the graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite was promising as an efficient adsorbent for heavy metal ions and organic dye removal from wastewater in low concentration.     

Adsorption of Hydrogels Based on Cellulose for Cu(II) and Ni(II): Behaviors and Mechanisms

Hydrogels based on cellulose-graft-poly (acrylic acid) copolymers (C-g-AA) were synthesized by graft copolymerization in a phosphoric acid solvent. Fourier transform infrared (FT-IR) spectra confirmed the structure of the C-g-AA. The adsorption behaviors of the hydrogels for Cu(II) and Ni(II) were investigated. The results showed that their adsorption capacity increased as the initial concentrations of metal ions and the pH value of the solution increased. Freundlich and Langmuir isotherm models were employed to analyze the data from batch adsorption experiments. The results indicated that there were very good correlation coefficients for their linearized equations. The maximum adsorption amounts of the hydrogels for the metal ions, based on the Langmuir model, were 182 and 200 mg/g for Cu(II) and Ni(II), respectively. When the initial concentration of metal ions was 1000 mg/g the actual adsorption amounts of the hydrogels for Cu(II) and Ni(II) were 181 and 183 mg/g, respectively.     

Preconcentration of Trace Cu(II) in Water Samples with Nano-Sized ZnO and Determination by GFAASSCIEI北大核心CSCD

The content of copper in natural water is very low, and direct determination is difficult. Therefore, it is very meaningful for the combination of efficient separation-enrichment technology and highly sensitive detection. Based on the high adsorption capacity of Cu(II) onto nano-sized ZnO, a novel method by using nano-sized ZnO as adsorbent and graphite furnace atomic absorption spectrometry as determination means was in this work. The adsorption behaviors of Cu(II) on nano-sized ZnO was studied. Effects of acidity, adsorption equilibrium time, adsorbent dosage and coexisting ions on adsorption rates were investigated. The results showed that the adsorption efficiency was above 95% in a pH range from 3.0 to 7.0. Compared with other adsorbents for trace element enrichment such as activated carbon, nano-sized TiO2 powder, the most prominent advantage is nanosized ZnO precipitate with the concentrated element can directly dissolved in HCl solution without any filtration and desorption process can directly analyzed by graphite furnace atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry. Compared with colloid nano materials, nano-sized ZnO is the true solution after dissolving have small matrix effect and viscosity more suitable for graphite furnace atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry detection. The proposed method possesses low detection limit (0.13 mu g.L-1) and good precision (RSD=2.2%). The recoveries for the analysis of environmental samples were in a rang of 91.6%-92.6% and the analysis results of certified materials were compellent by using the proposed method.