A novel and low cost electrochemical sensor for ceftazidime and cefazoline as antibiotic drugs based on nickel/SDS-poly(o-aminophenol) modified electrode

Poly(o-aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of ceftazidim and cefazolin at the surface of the Ni/SDS-POAP/CPE were studied in a 0.1 M NaOH solution. Finally, using chronoamperometric method, the catalytic rate constants (k) for ceftazidim and cefazolin were calculated. Electrode was successfully applied for determination of ceftazidim and cefazolin in pharmaceutical preparations.     

Comparative study of 2‐amino and 3‐aminobenzoic acid copolymerization with aniline synthesis and copolymer properties

Polyanilines soluble in an aqueous basic medium were synthesised by copolymerization of aniline (ANI) with both 2 and 3‐aminobenzoic acids (ABA). Different composition copolymers were prepared by varying the ANI/ABA feed ratio. Poly(aniline‐co‐2‐aminobenzoic acid) (PANI2ABA) and poly(aniline‐co‐3‐aminobenzoic acid) (PANI3ABA) displayed differences in their properties, such as specific charge and fluorescence behavior because the reactivity of 2‐aminobenzoic (2ABA) and 3‐aminobenzoic (3ABA) acids are very different. The new materials were characterized by X‐ray photoelectron, Fourier transform infrared, and Raman spectroscopies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5587–5599, 2004     

Nickel/Poly(o‐aminophenol) Film Prepared in Presence of Sodium Dodecyl Sulfate: Application for Electrocatalytic Oxidation of Carbohydrates

Poly(o‐aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of glucose and other carbohydrates at the surface of the Ni/SDS‐POAP/CPE were studied in a 0.1 M NaOH solution. Compared to POAP/CPE, the SDS‐POAP/CPE significantly enhanced the catalytic efficiency of Ni ions for carbohydrates oxidation. Finally, using chronoamperometric method, the catalytic rate constants (k) for carbohydrates were calculated.     

Oligomer-immobilizing ability of an electrodeposited aramid resin film in the electrooxidation of aniline derivatives and the functions of the resulting films

An aramid resin, poly(p-phenylene terephthalamide) (PPTA), was electrodeposited on an indium-tin oxide electrode as a mechanically stable film from a dimethyl sulfoxide solution. Two aniline derivatives, o-phenylenediamine and o-aminophenol, were electrooxidized from H₂SO₄ aqueous solutions using the PPTA film-coated electrode. The PPTA film was permeable to the aniline derivatives, and the derivatives were electrooxidized on the electrode surface. When the derivatives were electrooxidized, the film immobilized the corresponding oligomer species as well as the polymers plain (o-phenylenediamine) (PoPD) and poly(o-aminophenol) (PoAP), and the deposited amount of the polymers was increased by the PPTA film. The immobilized amount of PoAP was greater than that of PoPD because of the 1,4-substituted structure of PoAP. In the PPTA film, both PoPD and PoAP were electronically stabilized, and they became durable against oxidative degradation.     

pH sensor based on polyaniline and aniline–anthranilic acid copolymer films using quartz crystal microbalance and electronic absorption spectroscopy

The pH sensitivity based on conducting polyaniline (PANI) and copolymer of aniline and o‐anthranilic acid (AA) films were studied using quartz crystal microbalance (QCM) technique and UV–Vis spectroscopy. The sensor was constructed from these polymer films coated on the electrode of the QCM. The resonant frequency changes as a function of pH in the range of 2–12 were measured. These changes are quantitative indication of the degree of dedoping or redoping of the polymer films upon the subsequent exposure of the electrode to 0.25 M sulfuric acid and different pH solutions. There are two linear regressions between the frequency change and pH with two different and opposite slopes in the regions from 2 to 9 and 9 to 12. The pH sensitivity of the copolymer film was found to be less than using the PANI film. Thin films of PANI and copolymer, which were chemically polymerized in a sulfuric acid solution, were deposited onto the inner walls of the quartz cuvettes. The UV–Vis absorption spectra of these films were measured in different pH solutions. Relations between the maximum absorption and its wavelength versus pH were constructed. The copolymer film shows some advantages over the PANI film. The difference between the PANI and copolymer films as pH sensors using the QCM and electronic absorption extends from the determination of pK_a for both films. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of achiral PEG‐PANI rod‐coil block copolymers and their helical superstructures

Poly(ethylene glycol) (PEG) was modified with aniline groups at both the end, and then PEG‐PANI rod‐coil block polymers have been synthesized by polymerization of the aniline with the aniline‐modified PEG. FTIR, NMR, and elemental analysis provided the chemical strucutre of the as‐prepared polymers. The achiral rod‐coil copolymer could form different superstructures by means of self‐assembly when adding diethyl ether into its THF solution and the length of PANI segments is a key factor to the superstructures. AFM measurements revealed that they form spring‐like helical superstructures from the short PANI‐containing copolymers while these form fibrous helical superstructures from the longer PANI‐containing copolymer. A possible mechanism of the helical superstructures is suggested in this article and the driving force is believed the π–π stacking of the rigid segment of the copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 12–20, 2008     

邻苯二胺、邻氨基酚的电化学聚合及聚合的膜性质

邻苯二胺(ODB), 邻氨基酚(OAP)在酸性水溶液中易电聚合, 可形成致密的聚合膜。聚邻苯二胺(PODB)在PH<4时具有电活性, 其氧化还原反应与电变色效应对应。聚邻苯二胺,聚邻氨基酚(POAP)膜电极电位在pH=4～10范围对pH有Nernst响应, 电极系数分别为59mV/pH和57mV/pH。响应时间小于3分钟。PODB, POAP膜能与Ni~(2+), Co~(2+)过渡金属离子形成稳定的聚合络合膜。此膜在碱性介质中具有稳定的循环伏安行为, 膜中的金属离子可被H~+交换。PODB电极的—NH_2基可再修饰引入醌/氢醌功能团。     

Electrochemical and chemical modification of poly-o-phenylenediamine redox polymer

Various methods for modification of poly-o-phenylenediamine (PPD) redox polymer with polyaniline (PANI) electron-conducting polymer, ReO ₄ ⁻ and [SiMo₁₂O₄₀]⁴⁻ anions, and palladium clusters are compared. Participation of anions is proven in the processes of PPD synthesis and redox transformations. Formation mechanisms and properties of composites consisting of a redox polymer and electron-conducting polymer and those of two different electron-conducting polymers are compared for example of PPD-PANI and ethylene-dioxythiophene-polybithiophene. A comparison of these systems shows the main change in the potential drop to take place at the metal/polymer interface for a redox polymer and at the polymer/solution interface, for an electron-conducting polymer. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 12, pp. 1409–1416. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The article was translated by the authors.     

Nickel–poly(o-aminophenol)-modified carbon paste electrode; an electrocatalyst for methanol oxidation

In this work, a modified carbon paste electrode consisting of Nickel dispersed in poly(ortho-aminophenol) was used for electrocatalytic oxidation of methanol in alkaline solution. A carbon paste electrode bulk modified with o-aminophenol was used for polymer preparation by cyclic voltammetry method; then, Ni(II) ions were incorporated by immersion of the modified electrode in 1 M Ni(II) ion solution at open circuit. The electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)–Ni(II) couple. Electrocatalytic oxidation of methanol on the surface of modified electrode was investigated with cyclic voltammetry and chronoamperometry methods, and the dependence of the oxidation current and shape of cyclic voltammograms on methanol concentration and scan rate were discussed. Also, long-term stability of modified electrode for electrocatalytic oxidation of methanol was investigated.     

Enantioselective recognition of glutamic acid enantiomers based on poly(aniline-co-m-aminophenol) electrode column

A copolymer, poly(aniline-co-m-aminophenol), was synthesized by copolymerization of aniline and m-aminophenol in the presence of l-glutamic acid (l-Glu) as template molecules. The copolymer was filled into a porous ceramic column as the conductive stationary phase. Enantioselective recognition of Glu enantiomers was achieved on this special electrode column by applying different potentials on copolymers in the ceramic column. l-Glu anions were ejected from the ceramic column after electrochemical reduction due to the reversible redox of the copolymer while complementary cavities were left. Then a positive potential was applied to the molecularly imprinted poly(aniline-co-m-aminophenol) for re-binging Glu enantiomers in the mobile phase. The results showed good enantioselectivity.     

Synergistical assembly of multiwalled carbon nanotubes/polyaniline network for dye‐sensitized solar cells

In this study, an aniline (ANI) solution containing well‐dispersed multiwall carbon nanotubes (CNTs) has been prepared. With an aim of improving the dispersability of CNTs in ANI monomer, we synthesize CNTs/ANI complexes using a reflux technique which can be electrochemically polymerized to form well‐dispersed CNTs/polyaniline (PANI) films. The refluxed CNTs/ANI solution can be used to prepare high porous CNTs/PANI network via an electrochemical polymerization for applying as counter electrodes in dye‐sensitized solar cells. Compared with the pristine PANI, the multiwalled CNTs/PANI network shows more porous morphology and higher electrocatalytic activity, resulting in the acceleration of the reaction (triiodide (I^3?) to iodide (I^?)) of the redox electrolyte. The enhancement of the electrocatalytic activity is attributed to the interactions between multiwalled CNTs and PANI, promoting the quinoid ring structure and thus enhancing the conductivity of the polymer chains. The device, assembled with multiwalled CNTs/PANI network as counter electrodes, delivers 7.67% power conversion efficiency, which is comparable to 7.43% of that with Pt. Copyright © 2014 John Wiley & Sons, Ltd.     

Conductivity Studies of <Emphasis Type="Italic">n</Emphasis>-Tetrabutylammonium Tetraphenylborate in 3-Pentanone in the Temperature Range from 283.15 to 329.15 K

The molar conductivities (Λ) of solutions of n-tetrabutylammonium tetraphenylborate (NBu₄BPh₄) in 3-pentanone have been measured in the temperature range from 283.15 to 329.15 K. The conductance data have been analyzed using the Lee-Wheaton conductivity equation with the distance parameter (a) set at Bjerrum’s pairing distance, and the limiting molar conductivities (Λ_o) and the association equilibrium constants (K _A) have been derived. The limiting ion conductivities (λ_±^o) have been evaluated according to the method of Krumgalz. The λ₊ ^o values have been compared with λ₊ ^o values calculated from the empirical equation of Gill. The thermodynamic functions, Gibbs energy (Δ G _A ^o), enthalpy (Δ H _A ^o) and entropy (Δ S _A ^o) for the process of ion-pair formation as well as the activation energy of the ionic movement (ΔH ^∗) have been evaluated. The obtained results are discussed in terms of ion-ion and ion-solvent interactions.     

Two-Layered Poly-o-phenylenediamine/Polyaniline Composite: Electrosynthesis and Spectroelectrochemical Properties

Spectroelectrochemical properties of poly-o-phenylenediamine (PPD) and the synthesized composite of PPD and polyaniline—two chemically related polymers containing an amino-substituted benzene ring but having different conduction nature—are studied. The polyaniline synthesis on PPD-modified electrodes involves stages of the reaction initiation, the copolymer formation, and the formation of a polyaniline layer at the copolymer/solution interface.     

Dispersible polyaniline nanoparticles in aqueous poly(styrenesulfonic acid) via the interfacial polymerization route

Water-dispersible nanoparticles of polyaniline (PANI) have been conveniently synthesized via the interfacial polymerization route using chemical oxidative polymerization of aniline (ANI) with ammonium peroxodisulfate in aqueous poly(styrenesulfonic acid) (PSS). Various molar feed ratios of ANI/PSS were employed to attain highly dispersible PANI nanoparticles. PSS was used as an anionic dopant and as a template for the formation of PANI nanoparticles. The dispersed PANI nanoparticles were characterized using a Zetasizer, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS). Functional group analysis and the thermal stability of PANI particle dispersions were examined using FT-IR, UV-visible spectroscopy, and thermogravimetry analysis. The particle size of PANI-PSS nanoparticles was controlled by tuning the molar feed ratio of ANI/PSS. A uniform size distribution was obtained with the particle size of 5-15 nm for ANI/PSS ratios less than 1/1.     

Temperature and pH effects on the kinetics of 2-aminophenol auto-oxidation in aqueous solution

The kinetics of the auto-oxidation of 2-aminophenol (OAP) to 2-amino-phenoxazin-3-one (APX) was followed in air-saturated aqueous solutions and the influence of temperature and pH on the auto-oxidation rate was studied. The kinetic analysis was based on a spectrophotometric method following the increase of the absorbance of APX. The process follows first order kinetics according to the rate law—d[OAP]/dt=k′[OAP]. The experimental data, within the pH range 4–9.85, were analyzed using both differential and incremental methods. The temperature variation of the overall rate constant was studied at pH=9.85 within the range 25–50°C and the corresponding activation energy was evaluated.     

Functionalized conducting polymers for chemical sensors – an in situ ESR/UV‐Vis‐NIR voltammetric study

The redox and optical properties of various well defined polymer and copolymer films containing pyrrole or thiophene units were studied. The in situ ESR/UV‐Vis‐NIR spectroelectrochemistry was applied to investigate polymers and copolymers deposited both electrochemically or by a special chemical procedure using adhesion promoter onto the optically transparent indium‐tin‐oxide (ITO) electrodes. The spectroelectrochemical responses of chemically and electrochemically prepared polythiophenes on ITO were compared and the electronic structures of both polymers found to be similar. In situ ESR/UV‐Vis‐NIR voltammetric studies on electrochemically prepared copolymers containing pyrrole units and various N,N′‐ethylene‐bis(salicylidenimine) (salen) transition metal complexes indicate the presence of both polysalen and polypyrrole redox active centers in the copolymer.     

Composite layers consisting of polyaniline and poly(o-phenylenediamine): Electrochemical deposition, electrochromic and electrocatalytic properties

The composite polymer layers consisting of polyaniline (PANI) and poly(o-phenylenediamine) (poly(o-PDA)) were electrodeposited on a platinum electrode by simultaneous electrochemical oxidation of corresponding monomers from aquaeous hydrochloric solutions. The growth of PANI and poly(o-PDA) occurs separately resulting in layers with two distinct, finely distributed phases. The first deposited layers are composed mainly of poly(o-PDA) and become richer in PANI as the electropolymerization proceeds. The aniline/o-PDA copolymer was not formed during electrodeposition, as evidenced by cyclic voltammetry and Fourier-transformed IR spectroscopy. It was demonstrated that the electrochromic properties of resulting composite layers are the combination of yellow/brown-reddish and green/dark blue observable color transitions which are characteristics of poly(o-PDA) and PANI, respectively. Electrocatalytic properties of the electrosynthesized composite layers were investigated on quinone/hydroquinone (Q/H₂Q) redox system and it was shown that the composite layers increase the heterogeneous electron transfer rate with a magnitudes ranging from those obtained on pure poly(o-PDA) to those obtained on pure PANI layer.     

Synthesis, characterization, and thermoelectric properties of a conducting copolymer of 1,12-bis(carbazolyl)dodecane and thieno[3,2-b]thiophene

Poly(1,12-bis(carbazolyl)dodecane-co-thieno[3,2-b]thiophene) (P(2Cz-D-co-TT)), a conducting copolymer was synthesized electrochemically by direct anodic oxidation of 1,12-bis(carbazolyl)dodecane (2Cz-D) and thieno[3,2-b]thiophene (TT) in boron trifluoride diethyl ethrate containing 30% (vol) dichloromethane. As-formed copolymers exhibited high redox activity and reversibility and good conductive properties. The emitting property of as-formed copolymer was different from those of respective homopolymers, and could be tuned by changing the initiate monomer feed ratios. Thermoelectric investigations revealed that the electrical conductivities of as-obtained copolymer films were between 0.1 and 0.3 S cm⁻¹ at ambient temperature, lower than that of polythieno[3,2-b]thiophene (PTT) (0.42 S cm⁻¹) but two orders of magnitude higher than that of poly(1,12-bis(carbazolyl)dodecane) (P2Cz-D) (10⁻³ S cm⁻¹). The Seebeck coefficients and the power factors of the copolymers were improved with different degrees compared with those of PTT and P2Cz-D. As expected, the thermoelectric performance of PTT and P2Cz-D were both improved through copolymerization, which may be beneficial to the exploration and investigation of novel organic thermoelectric materials.     

Study of the mechanism of redox transformations of sterically hindered <Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminoquinones

The mechanisms of redox transformations of sterically hindered [¹IBQ]-[³IBQ], 9,10-iminophenanthraquinone [⁴IFQ], and o-aminophenol [⁵AP] have been studied by cyclic voltammetry. It has been shown that the reduction process in tetrahydrofuran consists of two consecutive reversible steps leading to the formation of a radical anion and a dianion. In the case of acetonitrile, only the first redox process is detected, which involves the steps of protonation and electron addition resulting in the formation of a monoanion. Quantum-chemical calculations indicate a lower degree of participation of the six-membered nonaromatic carbon ring in the spin density delocalization in the o-iminosemiquinonate radical anions as compared to o-benzosemiquinonate radical anions. The oxidation of iminoquinones results in the formation of an unstable radical cation, which undergoes further chemical transformations. An increase in the acidity of a medium leads to the formation of protonated forms with the reduction potential being shifted anodically. The introduction of screening groups makes it possible to suppress side reactions of hydrolysis and cyclization of oxidized o-aminophenol [⁵AP] forms. Therefore, the major product of complete electrolysis is o-iminobenzoquinone [²IBQ].     

Donor–acceptor‐based poly(toluidine‐co‐chloroaniline)s: Synthesis and characterization

A series of poly(o‐/m‐toluidine‐co‐o‐/m‐chloroaniline) copolymers of different compositions were synthesized by an emulsion method with ammonium persulfate as the oxidant. The conductivity of the copolymers was two to five orders of magnitude higher than that of the homopolymers poly(o‐toluidine) and poly(m‐chloroaniline). Among the copolymers, the copolymer of o‐toluidine and m‐chloroaniline exhibited a maximum conductivity of 0.14 S cm^?1. The conductivity of these copolymers was also higher than that of poly(aniline‐co‐chloroaniline). The properties of the copolymers were greatly influenced by the positions of the substituents and the concentrations of the individual monomers in the feed. All the copolymers were completely soluble in polar solvents such as dimethyl sulfoxide and showed higher heat stability as the chloroaniline concentration increased. These effects could be interpreted in terms of extensive hydrogen bonding and interchain linking and, therefore, higher electron delocalization in these copolymers due to the presence of electron‐rich toluidine rings adjacent to electron‐deficient chloroaniline. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1579–1587, 2005