Theoretical insights into the metal-free and formal [2 + 2 + 2] cycloaddition strategy via intramolecular cascade propargylic ene/Diels-Alder reactions with tautomerization

A metal-free and formal [2 + 2 + 2] cycloaddition of triynes has emerged recently as a novel methodology for the synthesis of fused tricyclic compounds via an intramolecular cascade propargylic ene reaction, Diels-Alder cycloaddition and tautomerization. DFT calculations on three model systems reveal that the ene reaction with low distortion energy makes the metal-free strategy feasible and, as the rate-determining step, affects the regioselectivity of unsymmetric triynes. Furthermore, the types of final products depend on H-transfer during tautomerization after the Diels-Alder reaction. Generally, the different tethered atoms between the yne moieties are responsible for the different regioselectivities and the final products in the [2 + 2 + 2] cycloadditions. On the basis of a comprehensive theoretical investigation into the mechanism, triynes involving cyclic ynes have been designed and are predicted to react to afford fused tetracyclic products under milder conditions due to dramatically lower energy barriers and by altering the rate-determining step to the Diels-Alder reaction.     

Organocatalytic, enantioselective intramolecular [6+2] cycloaddition reaction for the formation of tricyclopentanoids and insight on its mechanism from a computational study

Diphenylprolinol silyl ether was found to be an effective organocatalyst for promoting the asymmetric, catalytic, intramolecular [6 + 2] cycloaddition reactions of fulvenes substituted at the exocyclic 6-position with a δ-formylalkyl group to afford synthetically useful linear triquinane derivatives in good yields and excellent enantioselectivities. The cis-fused triquinane derivatives were obtained exclusively; the trans-fused isomers were not detected among the reaction products. The intramolecular [6 + 2] cycloaddition occurs between the fulvene functionality (6π) and the enamine double bond (2π) generated from the formyl group in the substrates and the diphenylprolinol silyl ether. The absolute configuration of the reaction products was determined by vibrational circular dichroism. The reaction mechanism was investigated using molecular orbital calculations, B3LYP and MP2 geometry optimizations, and subsequent single-point energy evaluations on model reaction sequences. These calculations revealed the following: (i) The intermolecular [6 + 2] cycloaddition of a fulvene and an enamine double bond proceeds in a stepwise mechanism via a zwitterionic intermediate. (ii) On the other hand, the intramolecular [6 + 2] cycloaddition leading to the cis-fused triquinane skeleton proceeds in a concerted mechanism via a highly asynchronous transition state. (iii) The fulvene functionality and the enamine double bond adopt the gauche-syn conformation during the C-C bond formation processes in the [6 + 2] cycloaddition. (iv) The energy profiles calculated for the intramolecular reaction explain the observed exclusive formation of the cis-fused triquinane derivatives in the [6 + 2] cycloaddition reactions. The reasons for the enantioselectivity seen in these [6 + 2] cycloaddition reactions are also discussed.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

Recent advances in [2+2+2] cycloaddition reactions

The [2+2+2] cycloaddition is an elegant, atom-efficient and group tolerant process for the synthesis of carbo- and heterocycles, mostly aromatic, involving the formation of several C-C bonds in a single step. Cyclotrimerisation is catalyzed by a variety of organometallic complexes, including more than 15 different metals. The aim of this tutorial review is to point out the most recent advances in this field and to encourage the use of this reaction enroute to complex molecules. After summarizing the most common catalysts and reaction conditions generally used, we survey the mechanistic features currently accepted for this reaction. Section 4 covers the scope of the different [2+2+2] cycloaddition versions starting with the cyclotrimerisation of three triple bonds, including nitriles, with especial emphasis on asymmetric reactions that create central, axial or planar chirality. Then, reactions that use double bonds are addressed. Finally, the most outstanding examples of natural products synthesis using [2+2+2] cycloadditions as a key step reported recently are shown.     

过渡金属催化[2 + 2 + 2]环加成反应合成吡啶衍生物

环加成反应可以一步同时构建多个化学键,是目前国内外研究最为活跃的领域之一。相比于传统方法,过渡金属催化的[2+2+2]环加成反应是合成吡啶衍生物的有效手段。本文从反应机理、非手性吡啶化合物合成和手性吡啶化合物合成三个方面阐述了近年来吡啶衍生物的研究情况,涉及Co、Rh、Ru、Fe、Ni、Ti等金属催化体系。     

Cross‐Cycloaddition of Two Different Isocyanides: Chemoselective Heterodimerization and [3+2]‐Cyclization of 1,4‐Diazabutatriene

A new cross‐cycloaddition reaction between a wide range of isocyanides and 2‐isocyanochalcones (or analogues) was developed for the expeditious synthesis of pyrrolo[3,4‐b]indoles under thermal conditions. On the basis of the experimental results and DFT calculations, a mechanism for this domino reaction is proposed involving chemoselective heterodimerization of two different isocyanides to form 1,4‐diazabutatriene intermediates, followed by an intramolecular [3+2]‐cycloaddition and 1,3‐proton shift.     

Calcium‐Catalyzed Formal [2+2+2] Cycloaddition

A formal intermolecular [2+2+2] cycloaddition reaction of enynes to aldehydes is presented, which can be realized in the presence of a simple and benign calcium catalyst. The reaction proceeds with excellent chemo, regio‐ and diastereoselectivity and leads to a one‐step assembly of highly interesting bicyclic building blocks containing up to three stereocenters from simple precursors via a new type of skeletal rearrangement of enynes. The observed diastereoselectivity is accounted for by two different mechanistic proposals. The first one engages mechanistic prospects arising from a gold catalyzed reaction in the absence of the stabilizing gold substituent. The second proposal involves an unprecedented cyclization–carbonyl allene ene reaction–hydroalkoxylation cascade.     

Intramolecular ene reaction of 1,6-fullerenynes: a new synthesis of allenes

[Structure: see text] Thermal treatment of 1,6-fullerenynes bearing an alkyl group on the terminal carbon of the alkyne moiety leads quantitatively to new allenes through a reaction mechanism involving an intramolecular ene process. This reaction outcome is in contrast to that recently found for free terminal alkynes which form cyclobutene derivatives through a [2+2] cyclization mechanism.     

Cobalt‐Catalyzed Intramolecular Reactions between a Vinylcyclopropane and an Alkyne: Switchable [5+2] Cycloaddition and Homo‐Ene Pathways

Cobalt–diphosphine catalysts have been found to promote intramolecular reactions between a vinylcyclopropane and an alkyne to selectively afford either the [5+2] cycloaddition product or the homo‐ene reaction product under solvent control. The former product is exclusively formed in noncoordinating 1,2‐dichloroethane, whereas the latter is dominant in coordinating solvents, such as acetonitrile and dimethylacetamide. Furthermore, a highly enantioselective variant of the homo‐ene reaction afforded chiral tetrahydrofuran, pyrrolidine, and cyclopentane derivatives bearing 1,3‐diene and alkylidene substituents.     

Mechanism, regioselectivity, and the kinetics of phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes

With the aid of computations and experiments, the detailed mechanism of the phosphine-catalyzed [3+2] cycloaddition reactions of allenoates and electron-deficient alkenes has been investigated. It was found that this reaction includes four consecutive processes: 1) In situ generation of a 1,3-dipole from allenoate and phosphine, 2) stepwise [3+2] cycloaddition, 3) a water-catalyzed [1,2]-hydrogen shift, and 4) elimination of the phosphine catalyst. In situ generation of the 1,3-dipole is key to all nucleophilic phosphine-catalyzed reactions. Through a kinetic study we have shown that the generation of the 1,3-dipole is the rate-determining step of the phosphine-catalyzed [3+2] cycloaddition reaction of allenoates and electron-deficient alkenes. DFT calculations and FMO analysis revealed that an electron-withdrawing group is required in the allene to ensure the generation of the 1,3-dipole kinetically and thermodynamically. Atoms-in-molecules (AIM) theory was used to analyze the stability of the 1,3-dipole. The regioselectivity of the [3+2] cycloaddition can be rationalized very well by FMO and AIM theories. Isotopic labeling experiments combined with DFT calculations showed that the commonly accepted intramolecular [1,2]-proton shift should be corrected to a water-catalyzed [1,2]-proton shift. Additional isotopic labeling experiments of the hetero-[3+2] cycloaddition of allenoates and electron-deficient imines further support this finding. This investigation has also been extended to the study of the phosphine-catalyzed [3+2] cycloaddition reaction of alkynoates as the three-carbon synthon, which showed that the generation of the 1,3-dipole in this reaction also occurs by a water-catalyzed process.     

Novel [2 + 2 + 2 + 1] cycloaddition of enediynes catalyzed by rhodium complexes

[reaction: see text] The first Rh-catalyzed intramolecular [2 + 2 + 2 + 1] cycloaddition reaction of enediynes and CO is reported. This novel higher order cycloaddition process gives the corresponding 5-7-5 ring systems in high yield and selectivity. This process is another significant addition to the arsenal of cycloaddition-based synthetic methods, which provide powerful tools for rapid and efficient construction of complex polycyclic systems.     

Intramolecular [3+2] nitrile oxide cycloaddition: synthesis of tetrahydroisoxazoloindazoles

Novel tetrahydroisoxazoloindazoles were synthesized from substituted 1,3-diketones by employing intramolecular [3+2] nitrile oxide cycloaddition [INOC] reaction to alkene as the key step.     

[2+2]环加成反应机理的理论研究

[2+2]环加成反应是有机化学中非常重要的一类反应,其机理的研究一直是实验和理论工作者关注的课题之一。本文从理论的角度综述了三类[2+2]环加成反应的反应机理,即简单烯烃或炔烃参与的环加成反应、累积双键体系参与的环加成反应以及稀土钍化合物参与的环加成反应, 得出对于简单的烯烃或炔烃之间的环加成反应一般是按双自由基机理进行,而其他两类反应主要按协同或两性离子方式进行,并且从前线分子轨道作用理论角度分析了产生不同反应机理的原因。     

[6+2]Cycloadditions catalyzed by titanium complexes

The Ziegler catalyst TiCl₄-Et₂AlCl and the arenetitanium(II) complex (η6-C₆H₆)Ti(II)(AlCl₄)₂ induce [6 + 2]cycloaddition reactions of cycloheptatriene with dienes and acetylenes. Addition to 1,3-butadiene affords 7 - endo - vinyl - bicyclo[4.2.1]nona - 2,4 - diene (main product) and bicyclo[4.4.1]- undeca - 2,4,8 - triene, a product of [6+4]cycloaddition. Isoprene reacts similarly, yielding mainly 7- endo - isopropenyl - bicyclo[4.2.1]nona - 2,4 - diene. 2,3 - Dimethyl - 1,3 - butadiene gives 8,9dimethylbicyclo [4.4.1]undeca - 2,4,8 - triene, a product of [6 + 4]cycloaddition, while [6 + 2]cross-adducts are minor products. The reaction of cycloheptatriene with norbornadiene gives mainly hexacyclo[6.5.1.0^2,7.0^3,12.^6,10.0^9,13]tetradec - 4 - ene via [6+2]cycloaddition followed by intramolecular Diels-Alder reaction. As a by-product, pentacyclo[7.5.0.0^2,7.0^3,5.0⁴⁸]tetradeca - 10,12 - diene is formed by a [2+2+2]mechanism. Addition of cycloheptatriene to diphenylacetylene and bis - (tri- methylsilyl)acetylene furnishes sustituted bicyclo[4.2.1]nona - 2,4,7 - trienes. Alkenes, E,E-2,4 - hexadiene and 1,3 - cyclooctadiene are unreactive. The [6+2]cycloaddition is made possible by coordination of cycloheptatriene to titanium, which changes the symmetry of the frontier orbitals in the triene. The reactivity of the trienophile is also enhanced by coordination to the catalyst.     

Theoretical insight into stereoselective reaction mechanisms of 2,4-pentanediol-tethered ketene-olefin [2 + 2] cycloaddition

We report ab initio molecular dynamics calculations based on density functional theory performed on an intramolecular [2 + 2] cycloaddition between ketene and olefin linked with a 2,4-pentanediol (PD) tether. We find that the encounter of the ketene and olefin moieties could be prearranged in the thermal equilibrated state before the cycloaddition. The reaction mechanism is found to be stepwise, similar to that of intermolecular ketene [2 + 2] cycloadditions with ordinary alkenes. A distinct feature of the reaction pathway for a major diastereoisomer is a differential activation free energy of about 1.5 kcal/mol, including 2.8 kcal/mol as the differential activation entropy, with a transition state consisting of a flexible nine-membered ring in the olefin-PD-ketene moiety. This theoretical study provides a reasonable explanation for the strict stereocontrollability of the PD-tethered ketene-olefin cycloaddition, irrespective of reaction types or conditions.     

Asymmetric Rh(I)-catalyzed intramolecular [3 + 2] cycloaddition of 1-yne-vinylcyclopropanes for bicyclo[3.3.0] compounds with a chiral quaternary carbon stereocenter and density functional theory study of the origins of enantioselectivity

A highly enantioselective Rh(I)-catalyzed intramolecular [3 + 2] cycloaddition of 1-yne-VCPs to bicyclo[3.3.0] compounds with an all-carbon chiral quaternary stereocenter at the bridgehead carbon was developed. DFT calculations of the energy surface of the catalytic cycle (complexation, cyclopropane cleavage, alkyne insertion, and reductive elimination) of the asymmetric [3 + 2] cycloaddition reaction indicated that the rate- and stereo-determining step is the alkyne-insertion step. Analysis of the alkyne-insertion transition states revealed that the serious steric repulsion between the substituents in the alkyne moiety of the substrates and the rigid H(8)-BINAP backbone is responsible for not generating the disfavored [3 + 2] cycloadducts.     

Formal synthesis of aspidosperma alkaloids via the intramolecular [3 + 2] cycloaddition of 2-azapentdienyllithiums

[reaction: see text] A formal synthesis of the Aspidosperma alkaloids aspidospermidine, aspidospermine, and quebrachamine is reported through an efficient preparation of Stork's penultimate intermediate. The key step of the sequence involved an intramolecular [3 + 2] cycloaddition of the 2-azapentadienyllithium 21 formed in situ from the corresponding imine 1, which after N-alkylation of the resulting cycloadduct provided 2 in excellent yield. The synthesis represents a new disconnection of the classical tricyclic ketone used for appendage of the requisite indole.     

Mechanistic twist of the [8+2] cycloadditions of dienylisobenzofurans and dimethyl acetylenedicarboxylate: stepwise [8+2] versus [4+2]/[1,5]-vinyl shift mechanisms revealed through a theoretical and experimental study

Recently, it was reported that both dienylfurans and dienylisobenzofurans could react with dimethyl acetylenedicarboxylate (DMAD) to give [8+2] cycloadducts. Understanding these [8+2] reactions will aid the design of additional [8+2] reactions, which have the potential for the synthesis of 10-membered and larger carbocycles. The present Article is aimed to understand the detailed mechanisms of the originally reported [8+2] cycloaddition reaction between dienylisobenzofurans and alkynes at the molecular level through the joint forces of computation and experiment. Density functional theory calculations at the (U)B3LYP/6-31+G(d) level suggest that the concerted [8+2] pathway between dienylisobenzofurans and alkynes is not favored. A stepwise reaction pathway involving formation of a zwitterionic intermediate for the [8+2] reactions between dienylisobenzofurans that contain electron-donating methoxy groups present in their diene moieties and DMAD has been predicted computationally. This pathway is in competition with a Diels-Alder [4+2] reaction between the furan moieties of dienylisobenzofurans and DMAD. When there is no electron-donating group present in the diene moieties of dienylisobenzofurans, the [8+2] reaction occurs through an alternative mechanism involving a [4+2] reaction between the furan moiety of the tetraene and DMAD, followed by a [1,5]-vinyl shift. This computationally predicted novel mechanism was supported experimentally.     

Rhodium(I)‐Catalyzed Bridged [5+2] Cycloaddition of cis‐Allene‐vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis‐ene‐vinylcyclopropanes (cis‐ene‐VCPs) underwent Rh‐catalyzed [5+2] reaction to give 5,7‐fused bicyclic products, where vinylcyclopropane (VCP) acts as five‐carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis‐ene‐VCPs to allene moiety, the corresponding cis‐allene‐VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7‐fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

One-pot synthesis of macrocycles by a tandem three-component reaction and intramolecular [3+2] cycloaddition

By combining three appropriately designed simple substrates, a programmed sequence involving an alpha-isocyano acetamide-based three-component reaction followed by a copper-catalyzed intramolecular [3+2] cycloaddition of alkyne and azide took place to afford complex macrocycles in moderate to good yields. One macrocycle and two heterocycles were produced with concurrent formation of five chemical bonds in this operationally simple process.