Rhodium(III) catalyzed oxidation of cyclic ketones by alkaline hexacyanoferrate(III)

The kinetics of the oxidation of 2-methyl cyclohexanone and cycloheptanone with Fe(CN)₆ ³⁻ catalyzed by RhCl₃ in alkaline medium was investigated at four temperatures. The rate follows direct proportionality with respect to lower concentrations of hexacyanoferrate(III) ion, but tends to become zero order at higher concentrations of the oxidant, while the reaction shows first-order kinetics with respect to hydroxide ion and cyclic ketone concentrations. The rate shows a peculiar nature with respect to RhCl₃ concentrations in that it increases with increase in catalyst at low catalyst concentrations but after reaching a maximum, further increase in concentration retards the rate. An increase in the ionic strength of the medium increases the rate, while increase in the Fe(CN)₆ ⁴⁻ concentration decreases the rate.     

Photocatalytic water oxidation: tuning light-induced electron transfer by molecular Co4O4 cores

Isostructural cubane-shaped catalysts [Co(III)(4)(μ-O)(4)(μ-CH(3)COO)(4)(p-NC(5)H(4)X)(4)], 1-X (X = H, Me, t-Bu, OMe, Br, COOMe, CN), enable water oxidation under dark and illuminated conditions, where the primary step of photoinduced electron transfer obeys to Hammett linear free energy relationship behavior. Ligand design and catalyst optimization are instrumental for sustained O(2) productivity with quantum efficiency up to 80% at λ > 400 nm, thus opening a new perspective for in vitro molecular photosynthesis.     

Green oxidation of 2-imidazolines with tert-butyl hydroperoxide catalyzed by supported manganese(III) porphyrin in water

Green oxidation of 2-substituted imidazolines with tert-butyl hydroperoxide catalyzed by tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], supported on polystyrene and silica bound imidazole is reported. A variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by these catalytic systems in H₂O. Ultrasonic (US) irradiation enhanced the catalytic activity of these catalysts and higher product yields were observed at shorter reaction times. These catalysts were re-used several times without significant loss of their catalytic activities. The effect of reaction parameters such as catalyst amount, reaction temperature, and the effect of US irradiation on the catalytic activity was also investigated.     

Benzylic oxidation catalyzed by dirhodium(II,III) caprolactamate

[reaction: see text] Dirhodium caprolactamate [Rh2(cap)4] is an effective catalyst for benzylic oxidation with tert-butyl hydroperoxide (TBHP) under mild conditions. Sodium bicarbonate is the optimal base additive for substrate conversion. Benzylic carbonyl compounds are readily obtained, and a formal synthesis of palmarumycin CP2 using this methodology is described.     

Iridium(III) catalyzed oxidation of cyclic ketones by cerium(IV)

IrCl₃which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media in the oxidation of cyclopentanone and 2-methylcyclohexanone by cerium(IV) sulphate in aqueous sulphuric acid medium. It was observed that the order of the reaction shows direct proportionality with respect to low concentrations of the oxidant and alcohols, but tends to become independent of concentration at higher concentrations. On increasing the concentrations of externally added Cl^-, H⁺ and Ce^IIIions, the rate of the reaction decreases sharply initially but the decrease in rate becomes less prominent as their concentration is increased. The rate of reaction is directly proportional with respect to IrCl₃concentrations. Kinetic data suggest that the production of Ce^III ion occurs before the rate-determining step. Parameters such as the energy of activation, free energy of activation and entropy data collected at five different temperatures suggest that cyclopentanone forms the activated complex more easily.     

Visible light-induced water oxidation on mesoscopic alpha-Fe2O3 films made by ultrasonic spray pyrolysis

Alpha-Fe(2)O(3) films having a mesoscopic leaflet type structure were produced for the first time by ultrasonic spray pyrolysis (USP) to explore their potential as oxygen-evolving photoanodes. The target of these studies is to use translucent hematite films deposited on conducting fluorine doped tin oxide (FTO) glass as top electrodes in a tandem cell that accomplishes the cleavage of water into hydrogen and oxygen by sunlight. The properties of layers made by USP were compared to those deposited by conventional spray pyrolysis (SP). Although both types of films show similar XRD and UV-visible and Raman spectra, they differ greatly in their morphology. The mesoscopic alpha-Fe(2)O(3) layers produced by USP consist mainly of 100 nm-sized platelets with a thickness of 5-10 nm. These nanosheets are oriented mainly perpendicularly to the FTO support, their flat surface exposing (001) facets. The mesoscopic leaflet structure has the advantage that it allows for efficient harvesting of visible light, while offering at the same time the very short distance required for the photogenerated holes to reach the electrolyte interface before recombining with conduction band electrons. This allows for water oxidation by the valence band holes even though their diffusion length is only a few nanometers. Distances are longer in the particles produced by SP favoring recombination of photoinduced charge carriers. Open-circuit photovoltage measurements indicate a lower surface state density for the nanoplatelets as compared to the round particles. These factors explain the much higher photoactivity of the USP compared to the SP deposited alpha-Fe(2)O(3) layers. Addition of hydrogen peroxide to the alkaline electrolyte further improves the photocurrent-voltage characteristics of films generated by USP indicating the hole transfer from the valence band of the semiconductor oxide to the adsorbed water to be the rate-limiting kinetic step in the oxygen generation reaction.     

Kinetics of the Ru(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III)

The kinetics of ruthenium(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The rate of oxidation of formaldehyde is directly proportional to [Fe(CN) _3– ⁶ ] while that of acetaldehyde is proportional tok[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]}, wherek, k andk are rate constants. The order of reaction in acetylaldehyde is unity while that in formaldehyde falls from 1 to 0. The rate of reaction is proportional to [Ru(III)] _T in each case. A suitable mechanism is proposed and discussed.

---

Die Kinetik der Ru(III)-katalysierten Oxidation von Formaldehyd und Acetaldehyd mittels alkalischem Hexacyanoferrat(III)

Zusammenfassung Die Untersuchung der Kinetik erfolgte spektrophotometrisch. Die Geschwindigkeitskonstante der Oxidation von Formaldehyd ist direkt proportional zu [Fe(CN) _3– ⁶ ], währenddessen die entsprechende Konstante für Acetaldehyd proportional zuk[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]} ist, wobeik,k undk Geschwindigkeitskonstanten sind. Die Reaktionsordnung für Acetaldehyd ist eine erste, die für Formaldehyd fällt von erster bis zu nullter Ordnung. Die Geschwindigkeitskonstante ist in jedem Fall proportional zu [Ru(III)] _T . Es wird ein passender Mechanismus vorgeschlagen.

     

Biomimetic oxidation of metribuzin with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides

The biomimetic oxidation of metribuzin, a pre- and post-emergence herbicide with hydrogen peroxide catalyzed by 5,10,15,20-tetraarylporphyrinatoiron(III) chlorides [TAPFe(III)Cl], has been studied yielding 6-t-butyl-3-methylthio-1,2,4-triazine-5(4H)-one, 4-amino-6-t-butyl-3,5(2H,4H)-dione and 6-t-butyl-1,2,4-triazin-3,5(2H,4H)-dione under various reaction conditions.     

Efficient and selective hydrocarbon oxidation with sodium periodate catalyzed by supported manganese(III) porphyrin

Manganese(III) tetrakis(p-sulfonatophenyl)porphyrin was successfully bound to silica modified with zirconium. The heterogeneous catalyst, MnTPPS-silica, was characterized by SEM, FT-IR and diffuse reflectance UV-Vis spectroscopic techniques. MnTPPS-silica catalyzes alkene epoxidation and alkanes hydroxylation with sodium periodate under agitation with magnetic stirring and ultrasonic irradiation in the presence of imidazole as an axial ligand. This catalytic system shows a good activity in the epoxidation of linear alkenes. Alkyl aromatic and cycloalkanes were efficiently oxidized to their corresponding alcohols and ketones in the presence of this catalyst. This new heterogeneous catalyst is of high stability and reusability in the oxidation reactions and can be reused several times without loss of its activity.     

Chiral Mn(III) salen catalyzed oxidation of hydrocarbons

Four chiral manganese(III)-salen complexes (1–4) were employed as catalysts in the oxidation of hydrocarbons at room temperature using pentafluoroiodosylbenzene as terminal oxidant. The reactions were carried out in acetonitrile and dichloromethane. Norbornene has been selectively oxidized to exo-epoxynorborane in 85% yield. At room temperature, oxygenation of cyclohexane up to 14% in acetonitrile medium has also been achieved.     

Efficient solvent-free iron (III) catalyzed oxidation of alcohols by hydrogen peroxide

Selective oxidation of secondary and benzylic alcohols was efficiently accomplished by H₂O₂ under solvent-free condition catalyzed by FeBr₃. Secondary alcohols are selectively oxidized even in the presence of primary ones. This method is high yielding, safe and operationally simple.     

Kinetics and mechanism of ruthenium(III) and ruthenium(III)-EDTA catalyzed oxidation of cyclohexanol by molecular oxygen

The kinetics of the oxidation of cyclohexanol by molecular O₂ catalyzed by Ru(III) and Ru(III)-EDTA complexes has been investigated by oxygen absorption method in the pH range 1.75–3.00 at 30°C (=0.1M KNO₃) in a 11 ethanol-water medium. In both cases the reaction was found to be first order with respect to substrate and catalyst concentration. The rate was found to decrease with the decrease of pH in case of Ru(III)-EDTA complex. Ethanol is not oxidized under the reaction conditions. A possible mechanism for the catalytic oxidation of cyclohexanol is proposed.

---

O₂, Ru(III) Ru(III)-EDTA, pH 1,75–3,00 30°C (=0,1M KNO₃) - (11). . pH Ru(III)-EDTA. . .

     

Gold(III) catalyzed oxidation of sulfides to sulfoxides with hydrogen peroxide

Au(III) catalyzed oxidation of sulfides to sulfoxides with 30% hydrogen peroxide in good yields and chemoselectivities was developed. It was shown that the catalyst loading can be decreased to 0.01 mol % with the good activity and chemoselectivity. Meanwhile, the catalyst was stable in the reaction system, which can be reused at least six cycles with similar activity and chemoselectivity.     

Asymmetric oxidation of sulfides catalyzed by chiral (salen)Mn(III) complexes with a pyrrolidine backbone

Catalytic properties of a series of chiral (pyrrolidine salen)Mn(III) complexes for asymmetric oxidation of aryl methyl sulfides were evaluated. Moderate activity, good chemical selectivity and low enantioselectivity were attained with iodosylbenzene as a terminal oxidant. Enantioselectivity of sulfide oxidation was affected slightly by polar solvent and the sulfoxidation carried out in THF for thioanisole and in CH₃CO₂Et for electron‐deficient sulfides gave better enatioselctivities. The addition of the donor ligand PPNO (4‐phenylpyridine N‐oxide) or MNO (trimethylamine N‐oxide) only has a minor positive effect on the enantioselectivity. Also explored was the steric effect of the N_aza‐substituent in the backbone of (pyrrolidine salen)Mn(III) complexes on the enantioselectivity of sulfide oxidation. The sulfides' access pathway is discussed based on the catalytic results. Copyright © 2006 John Wiley & Sons, Ltd.     

Kinetics and mechanism of the ruthernium(III) catalyzed oxidation of propane-1,3-diol by alkaline hexacyanoferrate(III)

The kinetics of oxidation of propane-1,3-diol by alkaline hexacyanoferrate (III) catalyzed by ruthenium trichloride has been studied spectrophotometrically. A reaction mechanism involving the formation of an intermediate complex between the substrate and the catalyst is proposed. In the rate-determining step this complex is attacked by hexacyanoferate(III) forming a free radical which is further oxidized.     

Ruthenium (III)-Schiff base complex catalyzed oxidation of secondary alcohols by N-methylmorpholine-N-oxide or thallium (III) acetate

The Ru(III) Schiff base complex [Ru(L)Cl₂]Cl; L = bis(picolinaldehyde) o-phenylenediimine, catalyzes the oxidation of secondary alcohols by N-methylmorpholine-N-oxide(NMO) or thallium(III) acetate as oxidant. Kinetic studies showed the formation of Ru(V) species as the active intermediate. © 1996 John Wiley & Sons, Inc.     

Spinels as heterogeneous catalysts for oxidation of water to dioxygen by tris-bipyridyl complexes of iron(III) and ruthenium(III)

Cobaltites, ferrites and chromites of some metals were found to be catalytically active in oxidation of water to dioxygen by trisbipyridyl complexes of Fe(III) and Ru(III). The possible catalytic action of surface compounds of hydroxide type is discussed.

---

, , - (III) (III). .

     

Kinetics and mechanism of ruthenium(III) catalyzed oxidation of tellurium(IV) by cerium(IV)

The reaction is zero order in cerium(IV), fractional order in tellurium(IV) and first oder in ruthenium(III). While the ionic strength has no effect, the rate increases with increasing [H⁺], and decreases with increasing [HSO ₄ ^– ]. H and S are 54.4 kJ mol^–1 and –60.3 JK^–1 mol^–1, respectively. A suitable mechanism is proposed.

---

(IV), (IV) (III). , [H⁺] [HSO ₄ ^– ]. H S 54,4 ^–1 –60,3 ·^–1·^–1, . .

     

Visible light-driven water oxidation by Ir oxide clusters coupled to single Cr centers in mesoporous silica

Visible light-induced water oxidation has been demonstrated at an Ir oxide nanocluster coupled to a single CrVI site on the pore surface of MCM-41 mesoporous silica. The photocatalytic unit was assembled by the reaction of surface Cr=O groups with Ir(acac)3 precursor followed by calcination at 300 degrees C and bond formation monitored by FT-Raman and FT-IR spectroscopy. High-resolution Z-contrast electron micrographs of the calcined material combined with energy-dispersive X-ray spot analysis confirmed the occlusion of Ir oxide nanoparticles inside the mesopores. Oxygen evolution of an aqueous suspension of the IrxOy-CrMCM-41 upon visible light irradiation of the CrVI-O ligand-to-metal charge-transfer absorption was monitored mass-spectrometrically. Comparison of the product yields for samples with low Cr content (Cr/Si 相似文献   

Enantioselective oxidation of racemic secondary alcohols catalyzed by chiral Mn(III)-salen complexes with N-bromosuccinimide as a powerful oxidant

We demonstrate an efficient enantioselective oxidation of secondary alcohols catalyzed by Mn(III)-salen complex using N-bromosuccinimide (NBS) as the oxidant. The new protocol is very efficient for the oxidative kinetic resolution of a variety of secondary alcohols, including ortho-substituted benzylic alcohols.