单分散磷酸镧纳米棒的可控制备

采用一步水热法在无模板情况下合成了单一形貌和尺寸均匀的磷酸镧纳米棒,产物分散性好.这种合成方法操作简单、能耗低、合成条件可控,并且重复性很好、可大面积合成.用X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)对磷酸镧的形貌、结构以及相组成进行了分析.结果表明:所合成磷酸镧为单斜相独居石结构;纳米棒直径为15 nm,长度约为几百纳米,具有相当高的纵横比,有望在性能方面得到优化;磷酸镧纳米棒为单晶.对影响磷酸镧纳米棒形成的反应条件如水热温度和水热时间进行了研究,并详细研究了其生长过程.提出了磷酸镧纳米棒的可能生长机制是基于纳米颗粒的定向粘附作用.     

聚苯乙烯/Ag核壳结构纳米微粒的制备及表征

用种子乳液聚合法合成了聚苯乙烯（PS）/Ag复合纳米粒子,进一步利用分步聚合技术实现了聚甲基丙烯酸甲酯(PMMA)在微球表面功能化,分别用TEM、XRD、TG-DTA及FT-IR对其结构和形貌进行了表征,并考察了其摩擦学性能.结果表明,在所选择的实验条件下,合成了以Ag纳米微粒为核,PS、PMMA为壳层的核壳结构复合纳米微球,其中Ag纳米核平均粒径约12 nm,复合微球粒径约25 nm,颗粒较均匀并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能.     

水溶性CdSe/CdS纳米晶合成条件的优化研究

以巯基乙醇为修饰剂,在水溶液中合成了稳定的CdSe/CdS纳米晶,应用单因素法和多目标单纯形法探索合成条件。通过透射电镜观察所合成的纳米晶的形貌和大小,用紫外-可见吸收光谱和荧光光谱对其光学特性进行了表征。并且以L-色氨酸荧光量子产率0.14为标准,测量了合成的CdSe/CdS纳米晶的荧光量子产率为0.37。     

微波加热制备PS/SiO2复合纳米微球及其摩擦性能研究

用微波加热法合成了表面功能化的聚苯乙烯／SiO2复合纳米粒子,分别用FTIR、TEM及TGDTA对其结构和形貌进行了表征,并考察了其摩擦学性能。结果表明,微波辐射能使反应时间大大缩短。在所选择的实验条件下,可制备出以SiO2纳米微粒为核,PMMA、PS为壳层的核壳结构复合纳米微球,微球粒径约15nm,颗粒较均匀,并且在有机溶剂中有良好的分散性,作为润滑油添加剂,具有良好的抗磨性能。     

一种新型纺锤状α-Fe_2O_3纳米晶的合成、表征及其表面性能(英文)

合成了一种新型的具有单晶结构的α-Fe2O3纳米晶(NFO-1).在我们的合成方法中,样品的形貌和结构在低反应浓度体系中运用无机盐和有机模板进行双重调控,同时用溶剂挥发诱导自组装(EISA)来加速反应和在不改变形貌结构的前提下获得高产率样品.所得α-Fe2O3纳米晶的形貌和结构对其表面修饰功能有明显的影响,NFO-1因其特殊的纺锤状形貌而与表面功能试剂(多巴胺)之间的化学作用有明显的增强.并且,本文所描述的合成方法同样适用于其他过渡金属氧化物纳米单晶的合成.我们预期,这种方法可为新型纳米材料的合成提供新的途径.     

不同形貌纳米FeNi合金的制备

纳米FeNi合金因其独特的电磁及催化性能在磁记录、催化剂、吸波材料及生物医学等领域存在广阔的应用前景。由于材料的形貌对其性能有着重要的影响,本文重点介绍了不同形貌(球形、一维形貌、纳米点阵、纳米环、纳米片、纳米花、树枝状及无特定形貌)纳米FeNi合金的制备方法,叙述了各方法制备纳米FeNi合金的基本原理及调控规律,并对各方法的优缺点作出了简要评价。同时,对材料形貌与尺寸对其性能影响的机理及规律作出了简要说明,阐述了其形貌及结构特征对材料性质的影响,指出了不同形貌纳米FeNi合金的优势应用领域。最后,对该领域未来的研究方向作出了展望。     

电纺纳米纤维多级形貌调控研究进展

"静电纺丝"是目前制备纳米级纤维最为简单有效的方法,其制得的纤维材料具有径细、质轻、比表面大、孔隙率大等优点,应用前景广泛。与传统纤维相比,电纺纤维具有一些独特的形貌结构特点。本文根据电纺纤维的宏观、微观形貌特征将其划分为三级形态(多根纳米纤维排列形成的聚集形貌)、二级形态(单根纳米纤维的宏观形貌)以及一级形态(单根纳米纤维的介观及微观形貌),详述了各级形态纤维的形貌结构特点、制备方法以及形成机理,并对这些形态各异纤维材料的应用前景进行了展望。     

层间距为1.44 nm层状氢氧化苯甲酸锌剥离重组行为研究

层间距为1.44 nm层状氢氧化苯甲酸锌在乙醇、正丙醇、正丁醇介质中可剥离成其基本组成单元纳米层. 用TG-DTA、XRD、SEM、TEM和元素分析等手段研究了剥离的纳米层重组得到样品的结构特征、形貌和化学组成. 结果表明: 水热合成样品和剥离的纳米层重组样品具有相同的层状结构, 它们的化学组成分别为Zn(OH)1.12(C6H5COO)0.88和Zn(OH)1.1(C6H5COO)0.9. 水热合成的纤维状粒子剥离重组后改变成为像纳米带和纳米花粒子形貌.     

一维CuO纳米棒的微乳-均匀沉淀耦合法制备与结构表征

以CuSO4和NH3·H2O为原料,采用微乳-均匀沉淀耦合法制备了一维CuO纳米棒。用XRD、SEM、TEM、HRTEM和FTIR对产物的结构和形貌进行了表征。结果表明:产物为单斜晶相结构的CuO纳米棒,内部具有孔洞结构,其直径为40～110nm,长度为800～3000nm。可通过改变水核比(ω)、反应物的浓度、反应时间、反应温度等条件实现对CuO纳米棒形貌和尺寸的调控。探讨了可能的反应机理,并用热分析方法考察了CuO纳米棒对高氯酸铵(AP)分解的催化作用。     

W/O型微乳液中不同形貌PbS纳米粒子的制备及其形成机理的探讨

用聚乙二醇辛基苯基醚(OP)/异辛醇/环己烷/水溶液所形成的微乳液体系控制合成出了PbS纳米粒子，考察了微乳液中水与表面活性剂的物质的量的比(ω₀)、反应物浓度及浓度比、陈化时间等条件对产物形貌的影响。采用透射电子显微镜(TEM)、X-射线衍射(XRD)分别对产物的结构、粒度和形貌进行了表征。结果表明，在微乳液体系中，控制不同的实验条件，可以成功地合成球形、梭形、针状和棒状的PbS纳米粒子，并且粒径分布集中，无团聚现象。论文还对不同形貌PbS纳米粒子的形成机理进行了探讨。     

表面活性剂对均相沉淀法制备单晶Ce2O(CO3)2·H2O微粉形貌及形成机理的影响

Three kinds of ultra-fine Ce2O(CO3)2.H2O powders with different morphologies were prepared by adding CTAB, PEG19000 and OP-10 to a solution of Ce2O (NO3)3.6H2O and urea according to the principle and the characteristics of the homogeneous precipitation method. The products were characterized by TEM and XRD. The results showed that the precursor was a single crystal, and that different surfactants had different influences on the morphology of the products. The cationic surfactant CTAB had little effect on crystal morphology merely reducing its size. Nonionic surfactants PEG19000 and OP-10 are both able to change the crystal morphology to a much greater extent. Adding PEG19000 produces an array of rod-like particles with ordered formation and uniform dimension. Meanwhile, in the system of OP-10, a sort of flower-like with different morphologies occured because of the mechanism of formation and grain growth.     

双连续相微乳液辐射聚合制备多孔材料的研究

利用6 0 Co γ射线在室温下辐照双连续相微乳液体系以制备多孔聚合物材料 ,试图在控制多孔材料的微孔结构形态和减少微乳液聚合过程中的相分离方面做一些探索 .通过电导率的测量分析微乳液的结构类型 ,并确定微乳液的双连续相区域范围 .微乳液聚合后所得的样品的孔结构和聚合前的微乳液结构类型有关 ,扫描电镜和热重分析的结果表明双连续相微乳液在聚合时容易发生相分离 ,未必能够得到开孔结构的聚合物 .但适当控制聚合前微乳液的组成 ,如选择合适的水油比例、交联剂的用量和加入一些功能性单体 (如甲基丙烯酸或丙烯酸钠 ) ,可以有效地抑制相分离 ,调节所得聚合物的结构形态 .     

Effects of concentration of nonionic surfactant and molecular weight of polymers on the morphology of anisotropic polystyrene/poly(methyl methacrylate) composite particles prepared by solvent evaporation method

The effects of the concentration of polyoxyethylene octylphenyl ether (OP-10) as a nonionic surfactant and the molecular weight of polymers (polystyrene (PS) and poly(methyl methacrylate) (PMMA)) on the morphology of anisotropic PS/PMMA composite particles were investigated. In the case of polymers with lower molecular weight (M _w ≈ 6.0 × 10⁴ g/mol), the PS/PMMA composite particles have dimple, via acorn, to hemispherical shapes along with the increase of the OP-10 concentration. On the other hand, when the polymers have higher molecular weight (M _w ≈ 3.3 × 10⁵ g/mol), the morphology of PS/PMMA composite particles changed from dimple, via hemispherical, to snowman-like structure while the concentration of OP-10 was increased. Furthermore, thermodynamic analysis was first simply made by spreading coefficients, and the results indicated that both the concentration of OP-10 aqueous solution and the molecular weight of polymers were very important to the final morphology of anisotropic composite particles.     

Effect of Mineral Salts on Steady Rheological Properties of Nonionic Hydrophobically Modified Polyacrylamide and Its Stress-Relaxation Behavior

A micelle-forming polymerizable surfactant monomer, octylphenol polyoxyethylene acrylate (OP-10-AC), was synthesized, and then OP-10-AC was copolymerized with acrylamide (AM) to form nonionic hydrophobically modified polyacrylamide P(AM/OP-10-AC) through micellar copolymerization. In the absence of surfactants, it was investigated in detail that the effect of mineral salts and temperature on steady rheological properties of P(AM/OP-10-AC) solutions and the effect of concentrations on reduced viscosity of P(AM/OP-10-AC) in a dilute solution. The results indicate that concentrations of the copolymer, mineral salts and temperature had a strong influence on shear viscosity of P(AM/OP-10-AC) solutions, and the trend of reduced viscosity of P(AM/OP-10-AC) solutions was distinctly different from polyacrylamide with increasing concentrations of testing solutions. In addition, it was also investigated that stress-relaxation behavior of an aqueous solution of P(AM/OP-10-AC)/KCl. As a result, a stress-relaxation model of the copolymer solutions was proposed, which can further verify the correctness of the conclusion on stress-relaxation behavior of hydrophobic association hydrogels in the paper reported previously.     

胜利超稠油的乳化降黏机理研究

研究了胜利油田滨南超稠油单56-4X4高黏的内在原因。油品性质分析结果表明,影响其高黏度的主要因素有两个:胶质、沥青质的总含量超过30%;有机杂原子O、N、S及过渡金属Ni等形成的配位络合物增加了沥青质分子的内聚力。实验筛选出的降黏剂OP-10对该超稠油降黏率高达99.59%。通过FT-IR、SEM、分子量和偶极矩等分析对比了降黏剂作用前后胶质、沥青质的结构性质变化,结果表明,OP-10使胶质、沥青质的氢键缔合作用减弱,部分拆散沥青质的堆积结构,从而使胶质、沥青质的分子量和偶极矩减小,分析得到降黏剂分子能渗透及分散胶质、沥青质的堆砌聚集体。偏光显微镜对乳状液及蜡晶微观形态的分析表明,降黏剂OP-10使超稠油乳状液由W/O型反相为O/W型而起到降黏作用;使蜡晶的聚集形态由细小均匀转变为尺寸较大的絮凝体,破坏蜡晶的三维网络结构,促进稠油黏度的下降。     

Study on Thermodynamics and Kinetics of Association Interactions between Malachite Green and OP-10 in Aqueous Solutions

The absorption spectrum of malachite green (MG) in a series of aqueous solutions with surfactant octylphenol polyoxyethylene ether (10) (OP-10) has been determined by the UV–Vis spectrophotometer. The association interaction between the MG and nonionic surfactant OP-10 in aqueous solutions resulted in obvious fading of MG. We established the thermodynamics model of association between MG and OP-10, and determined the association equilibrium constant in aqueous solutions. By measuring the absorbance of a series of aqueous solutions which have different molar concentrations of OP-10 but same concentration of MG at different time points, the order and rate constants of association reactions were determined and the reaction kinetics equation was set up.     

Tensile Mechanical Properties of Hydrophobic Association Hydrogels: Effect of Crosslinking Method,Synthesis Temperature,Mineral Salt and Swelling

Hydrophobic association hydrogels (HA-gels) were prepared through micellar copolymerization of acrylamide (AM) and a small amount of octylphenol polyoxyethylene acrylate (OP-10-AC) in an aqueous solution containing sodium dodecyl sulfate (SDS). For the P(AM/OP-10-AC) HA-gels, the effect of crosslinking method, synthesis temperature, mineral salt (NaCl) and swelling on their tensile mechanical properties was investigated in detail. The experimental results show that crosslinking method, synthesis temperature, NaCl and swelling powerfully influenced tensile mechanical properties of the P(AM/OP-10-AC) HA-gels. In addition, according to the tensile experimental results of the P(AM/OP-10-AC) HA-gels swollen, an effective crosslinking density change model is proposed. The effect of swelling on tensile mechanical properties of the P(AM/OP-10-AC) HA-gels was discussed on the basis of the model.     

铁饼状碳酸钙的制备及性能研究

本文以氯化钙和氨水的混合溶液为水相,聚氧乙烯辛基苯酚醚-10(OP-10)为表面活性剂,正辛醇为助表面活性剂,环己烷为油相配制了反相微乳液。并通过向其中通入CO 2气体制备微/纳米碳酸钙,得到了铁饼状的微米碳酸钙。采用扫描电子显微镜(SEM),X射线粉末衍射(XRD)和傅里叶变换红外光谱(FTIR)表征了微米碳酸钙的形貌和晶型结构。初步探讨了铁饼状微米碳酸钙的形成机理。     

非离子表面活性剂存在下光催化降解有机颜料

研究了加入非离子表面活性剂OP-10时有机颜料光催化降解过程,实验选用的颜料为艳红6B(C.I.Pigment Red482),以高压汞灯为光源,TiO2为催化剂.通过改变水溶液的pH值和OP-10的浓度,考察了颜料和OP-10各自的降解特性.实验结果表明,酸性条件下,OP-10的存在明显加快了颜料的降解,碱性条件下反而抑制了颜料的降解.中性条件下,OP-10的增溶对体系的降解有一定影响,浓度为0.126g/L(2.5cmc)时,颜料和OP-10降解效果最好.     

SBA-15模板法合成硫化锌纳米束及其光电性能

以乙基黄酸锌(ZnR2)作为单分子前驱体, SBA-15作为模板, 合成高度有序的ZnS纳米束, 并通过透射电子显微镜(TEM)、热重-差热分析(TG-DTA)、X射线衍射(XRD)、N2吸附-脱附、紫外-可见(UV-Vis)光谱、荧光光谱和扫描电子显微镜(SEM)等一系列手段对其形貌、结构及性能进行表征. 结果表明, 此阵列具有高度有序的六方介孔结构, 同时具有类似于母模板的纤维状形貌. 采用一种简单的交流电场辅助的方法把纳米束组装到电极上, 然后通过半导体表征仪器进行测试, 表征结果发现单束ZnS纳米束呈现出非线性的整流行为, 在紫外光照射下, 其电流-电压(I-V)曲线发生了很大的变化, 说明利用它们组装的纳米器件具有良好的光开关效应,并对整流及光响应机理进行了解释.