Blends of poly(2,6–dimethyl–1,4–phenylene oxide) with styrene copolymers

Binary blends of poly(2,6–dimethyl–1,4–phenylene oxide) (PPE) with various styrene copolymers were investigated. Poly(styrene–co–acrylonitrile) (SAN), poly[styrene–co–(methyl methacrylate)] (SMMA), poly[styrene–co–(acrylic acid)] (SAA) and poly[styrene–co–(maleic anhydride)] (SMA) are only miscible with PPE when the amount of comonomer is rather small. From calculated binary interaction densities it can be concluded that the strong repulsion between PPE and comonomer limits miscibility. In blends of PPE with SAN, as well as with ABS, the inter-facial tension between the blend components is significantly reduced upon addition of polystyrene–block–poly–(methyl methacrylate) diblock copolymers (PS–b–PMMA) and polystyrene–block–poly (ethylene–co–butylene)–block–poly–(methyl methacrylate) triblock copolymers (PS–b–PEB–b–PMMA). They show a profound influence on morphology, phase adhesion and mechanical blend properties.     

SPME-GC-MS analysis of commercial henna samples (Lawsonia inermis L.)

The aim of this work was to provide a characterisation of volatile constituents from different commercial batches of henna (Lawsonia inermis) leaves of different geographic origin. Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography–mass spectrometry (GC–MS) was used for the purpose. A total of 72 components were identified by GC–MS in the headspace of different henna samples which proved to differ considerably from each other, because they were characterised by different classes of components, mainly aliphatic compounds (9.0–64.7%), terpenoids (5.8–45.5%) and aromatics (7.9–45.2%), with alkanes (0.9–18.5%), aldehydes (2.1–18.8%) and carboxylic acids (3.1–29.3%), monoterpenes (3.4–30.0%) and sesquiterpenes (0.8–23.7%) and phenyl propanoids (0.6–43.1%), being the most abundant, respectively. Major representatives of these groups were n-hexadecane (0.5–4.7%), (2E)-hexenal (0.5–11.7%) and acetic acid (2.8–24.5%), limonene (0.8–14.7%), carvol (3.8–7.1%), geranyl acetone (1.4–7.9%) and (E)-caryophyllene (3.3–8.4%), and (E)-anethole (0.6–35.0%), respectively. We assume that factors such as the manufacturing process, the storage conditions and the different geographic origin of the samples may contribute to such variability.     

Non–symmetrically p–nitrobenzyl–substituted N–heterocyclic carbene–silver(I) complexes as metallopharmaceutical agents

In the present work, a series of eight new imidazole, 4,5–dichloroimidazole, 4,5–diphenylimidazole and benzimidazole based nitro–functionalized mono–N –heterocyclic carbene (NHC)–silver(I) acetate ( 7a–d ) and bis–NHC–silver(I) hexafluorophosphate complexes ( 8a–d ) were synthesised by the reaction of the corresponding azolium hexafluorophosphate salts ( 6a–d ) with silver(I) acetate and silver(I) oxide in methanol and acetonitrile, respectively. All the synthesised compounds were fully characterized by various spectroscopic techniques and elemental analyses. Additionally, the structure of bis–(1–benzyl–3–(p –nitrobenzyl)–4,5–dichloroimidazole–2–ylidene)silver(I) hexafluorophosphate complex ( 8b ) was confirmed by single crystal X–ray diffraction analysis. Preliminary in vitro antibacterial evaluation was conducted for all the compounds ( 6a–d) , ( 7a–d) , and ( 8a–d) by Kirby–Bauer's disc diffusion method followed by the determination of Minimum Inhibitory Concentration (MIC) from broth macrodilution method against five standard bacteria; two Gram–positive bacterial strains (Staphylococcus aureus and Bacillus subtilis) and three Gram–negative bacterial strains ( Escherichia coli , Shigella sonnei, and Salmonella typhi). All the hexafluorophosphate salts ( 6a – d) were found inactive against the tested bacterial strains and their corresponding mono– and bis–NHC–silver(I) complexes ( 7a–d and 8a–d ) exhibited moderate to high antibacterial activity with MIC value in the range 8–128 μg/mL. In addition, preliminary in vitro anticancer potential of all the silver(I) complexes ( 7a–d and 8a–d ) was determined against the human derived breast adenocarcinoma cells (MCF 7) by MTT assay. All the mono– and bis–NHC–silver(I) complexes ( 7a–d and 8a–d ) orchestrated high anticancer potential with IC₅₀ values ranging from 10.39 to 59.56 nM. In comparison, mono– NHC–silver(I) complexes performed better than the bis–NHC–silver(I) complexes.     

电化学原位表面增强拉曼光谱研究Au@Pd纳米粒子薄膜电极上吸附 CO的斯塔克效应

电化学 Stark效应是指电极溶液界面的吸附物或金属-吸附物之间的化学键的振动频率随电极电势而发生变化的现象.研究该效应,可以更好地理解吸附物与基底的相互作用(如吸附构型、吸附取向和覆盖度等随电位的变化),也可反过来推断电极基底的电子构型及其随电势的变化规律,对理解电化学双电层的结构以及电催化反应的构效关系都很有帮助.多年以来,电极表面吸附 CO的电化学 Stark效应广受关注,是由于 CO为很多小分子氧化的中间产物,研究 CO的谱学行为,可加深对 CO以及其它能产生 CO中间物有机小分子的电催化氧化机理和动力学的理解;另一方面, CO与过渡金属之间普遍存在s给电子以及p反馈电子作用,因此 CO也可作为探针分子,通过考察 COad以及 M–COad的振动频率的变化,可推断相应条件下基底的电子与几何结构等信息.
　　本文使用电化学原位表面增强拉曼技术,在一个大的电势范围内考察了 Au@Pd纳米粒子薄膜电极上饱和吸附 CO的振动光谱行为,以期更好地理解 COad与基底的成键作用与电极电势之间的关系.由于纯 Pd电极表面的拉曼信号太弱,实验使用具有核壳结构的 Au@Pd纳米粒子薄膜作为模型电极,并利用 Au核的拉曼增强特性.宽广的电势范围约–1.5到0.55V vs. NHE,通过使用酸性、中性以及碱性电解质得以实现.实验考察的电势上限由 COad氧化起始电位决定,而下限由强烈氢析干扰测量所限制.结果表明,在检测的电势范围内, C–OM(M指在电极表面的桥式吸附CO和穴位吸附 CO所形成的谱带重叠)和 Pd–COM键的振动频率可以分为三段： dνC–OM/dE在–1.5~–1.2 V范围内是185~207 cm–1/V,在–1.2~–0.15 V是83~84 cm–1/V,在–0.2~0.55 V是43 cm–1/V;而 dνPd–COM/dE在–1.5~–1.2 V范围内是–10~–8 cm–1/V,在–1.2~–0.15 V是–31~–30 cm–1/V,在–0.2~0.55 V是–15 cm–1/V.与同时记录的极化曲线对比,认为在中性和碱性介质中所观察到 dνC–OM/dE在–1.2 V附近的急剧变化与电极表面发生了强烈的析氢反应有关.另外,结合密度泛函理论模型计算,认为共吸附的 H减少了 COad从桥式构型到穴位构型的转变,在酸性介质中这种变化不明显,可能是由于对应的电势较高,桥式吸附的 CO比例越大,桥式向穴位的转变本身相对较少.     

Synthesis,Crystal Structure,and Ultraviolet–Visible Spectrum of 8–Substituted–10,10–Dimethyl–10H–pyrido[1,2–a]indolium Perchlorates–Containing Thienyl Moiety

Two novel compounds, 8–[2–(2–thienyl)vinyl]–10,10–dimethyl–10H–pyrido[1,2–a] indolium perchlorate ( 3a ) and 8–[2–(5–phenyl–2–thienyl)vinyl]–10,10–dimethyl–10H–pyrido[1,2–a]indolium perchlorate ( 3b ) were synthesized and characterized by IR, ¹H–NMR, elemental analyses, and X–ray diffraction. Crystal structural analysis suggested that either 3a or 3b exhibited good coplanarity and rings and vinyl in the target molecule could make up a large conjugated system. Ultraviolet–visible absorption analysis indicated both 3a and 3b possessed large maximum absorptions, and 3b underwent a significant redshift (43.0 nm) in comparison with 3a .     

Comparison of membrane assisted solvent extraction,stir bar sorptive extraction,and solid phase microextraction in analysis of tetramine in food

Three environmentally friendly extraction techniques, membrane assisted solvent extraction (MASE), stir bar sorptive extraction (SBSE), and headspace solid phase microextraction (HS‐SPME), were compared for the direct analysis of the highly toxic rodenticide tetramine in food. The optimized MASE method was applied to seven foods fortified with tetramine and compared to previously reported SBSE and HS‐SPME results. Parameters such as the standard addition linearity (MASE (0.964–0.999), SBSE (0.966–0.999), HS‐SPME (0.955–0.999)), recovery (MASE (12–86%), SBSE (36–130%), HS‐SPME (50–200%)), reproducibility (MASE (3.0–30%), SBSE (4.4–9.6%), HS‐SPME (1–12%)), and LOD (MASE (1.6–6.4 ng/g), SBSE (0.2–2.1 ng/g), HS‐SPME (0.9–4.3 ng/g)) were compared.     

Contact angle hysteresis in multiphase systems

Contact angle (CA) hysteresis is the difference between the maximum (advancing) and minimum (receding) water CA. Hysteresis is caused by adhesion hysteresis in the solid–water contact area (2D effect) and by pinning of the solid–water–air triple line due to the surface roughness (1D effect). In this work, we show that CA hysteresis is present also in more complex systems, such as an organic liquid (oil) in contact with a solid immersed in water. In order to decouple the 1D and 2D effects, we study CA hysteresis in solid–water–air (droplet), solid–air–water (bubble), solid–water–oil, and solid–water–air–oil systems involving rough and microstructured surfaces. The comparative analysis of these systems allows decoupling the 1D and 2D effects as well as hydrogen bonding and entropic forces (water–air tension) and dispersion forces (oil–air tension).     

Kinetics of Desolvation of Related Organic Inclusion Compounds

Abstract

This study dealt mainly with the structure-reactivity relationship of selected organic inclusion compounds. The crystal structures of the inclusion compounds of three related hosts, 2,2′–bis(2,7–di-tert-butyl-9–hydroxy-9–fluorenyl)biphenyl, 2,2′–bis (2,7–dichloro-9–hydroxy-9–fluoienyl)biphenyl and 2, 2′–bis(2,7-dibromo-9–hydroxy-9–fluorenyl)biphenyl with 1,4–dioxane (Compound 1), 1,3–dioxane (Compound 2) and 1,3–dioxolane (Compound 3) respectively were elucidated, using single crystal X-ray crystallography. It was found that the guests were either located in channels or constricted channels (cavities), formed by the host framework. The kinetics of desolvation of these compounds were studied and their activation energies were compared.     

Photoredox-catalyzed C(sp2)–N coupling reactions

Photoredox-catalyzed radical reactions have attracted intense interest from synthetic chemists over the past several years. The photoredox-catalyzed C(sp²)–N coupling reactions, including Ullmann type C–N coupling (C–X/N–H type coupling), redox neutral C–N coupling (C–H/N–X type coupling) and oxidative C–N coupling (C–H/N–H type coupling), have been summarized in this digest.     

Thermal stability of Friedel’s salt from metakaolin origin by DSC and HTXRD techniques

Journal of Thermal Analysis and Calorimetry - The structural relaxation of Na2O–K2O–CaO–ZrO2–SiO2 (NKCZ), Na2O–K2O–ZnO–ZrO2–SiO2 (NKzZ),...     

Mineral content and physical properties of local and imported honeys in Saudi Arabia

In addition to color, ash and electrical conductivity (EC), the levels of 14 minerals were investigated in 23 varieties of honey from Saudi Arabia and six other countries. The quantities of the macrominerals obtained were as follows (in ppm): K (298.60–491.40), Mg (80.70–199.30), Ca (60.75–99.95), P (21.10–33.29), and Na (15.69–26.93). The quantities of trace minerals were as follows (in ppm): Fe (67.18–98.13), I (12.61–94.68), Mn (4.15–6.04), Zn (3.44–5.72), Li (1.15–4.26), Co (1.00–1.32), and Ni (0.15–0.67). The quantities of the heavy metals Pb and Cd were found to be 0.06–0.23 and 0.00–0.16, respectively. The values of the tested elements—color, ash and EC—varied among the tested honeys according to their botanical origin. Dark honeys, especially acacia honeys, had higher elemental content and EC values than lighter ones. Saudi and Yemeni seder honeys exhibited no distinctive characteristics in their tested parameters. The levels of heavy metals indicated that the tested honeys were safe for human consumption.     

Practical resolution of an atropoisomeric α,α-disubstituted glycine with l-phenylalanine cyclohexylamide as chiral auxiliary

l-Phenylalanine cyclohexylamide has been used as a chiral auxiliary for the medium-scale resolution of 2′,1′:1,2;1″,2″:3,4-dinaphthcyclohepta-1,3-diene-6-amino-6-carboxylic acid (Bin), an α,α-disubstituted glycine with only axial dissymmetry. Coupling of X–Bin–OH (X=Ac; Bz) with H–(l)-Phe–NH–C₆H₁₁ by the EDC/HOBt method gave the dipeptide diastereoisomers X–(R)-Bin–(l)-Phe–NH–C₆H₁₁ and X–(S)-Bin–(l)-Phe–NH–C₆H₁₁, which were separated by crystallization (X=Bz) and/or chromatography. Extensive acidic hydrolysis, followed by esterification of the resulting free amino acid enantiomers, led to enantiomerically pure (−)-(R)-H–Bin–OMe and (+)-(S)-H–Bin–OMe with high yields.     

Differing Coordination Modes of (O‐Alkyl)‐p‐Ethoxyphenyldithiophosphonato Ligands in Copper(I), Silver(I) and Gold(I) Triphenylphosphine Complexes

The three (O‐methyl)‐p‐ethoxyphenyldithiophosphonato triphenylphosphine complexes of copper, silver and gold, [(Ph₃P)_nM{S₂P(OMe)C₆H₄OEt‐p}] (M = Cu, n = 2; M = Ag, Au, n = 1) investigated structurally by X‐ray diffraction exhibit remarkable structural differences. The copper compound is a four‐coordinate chelate monomer with Cu–S 2.4417(6) and 2.5048(6) Å; P–Cu–S 104.24(2)–114.01(2)°; Cu–S–P 82.49(3)° and 80.85(2)°. The silver compound is a cyclic dimer with bridging dithiophosphonato ligands and three‐coordinate silver atoms [Ag–S 2.5371(5) and 2.6867(5) Å; P–Ag–S 122.88(2)° and 122.17(2)°; Ag–S–P 89.32(2)° and 103.56(2)°]. The gold compound is monomeric with linear dicoordinate gold [Au–S 2.3218(6) Å; P–Au–S 177.72(2)°, Au–S–P 100.97(3)°].     

On the alkaloids from Aspidosperma discolor A. DC

From the stem bark of Aspidosperma discolor A. DC. (–)-reserpiline, (–)-isoreserpiline, (+)-yohimbine, (–)-10-methoxy-geissoschizol and (–)-10-methoxy-dihydrocorynantheol (major alkaloids) and (–)-isoreserpiline-ψ-indoxyl, AD-V (–)-β-yohimbine, (+)-haplocidine, (+)-desmethylaspidospermine and (–)-demethoxy-aspidospermine (minor alkaloids) have been isolated.     

Peptides-XXXXVI: Studies in the synthesis of an analogue of hen egg white lysozyme

The previously synthesised (1–37), (38–75), (76–93), (94–104), (105–117) and (118–129) fragments of the analogue were combined making extensive use of the DCCI/HONSu method. The final coupling involved the (1–75) and (76–129) sub-fragments. Aggregation of the latter fragment caused problems in purification by routine gel filtration methods employing Enzacryl K2 or Sephadex LH60. The fully protected (1–129) product was partially purified by washing, then deprotectcd and purified by gel filtration and ion exchange chromatography. Satisfactory removal of the acetamidomethyl group used for cysteine protection could not be achieved.     

Asymmetric synthesis of (–)-leiocarpin A via (–)-(S)-goniothalamin employing Julia–Kocienski olefination

A concise and enantioselective syntheses of antileukemic natural products such as (–)-(S)-goniothalamin and (–)-leiocarpin A has been accomplished in excellent yields. By employing reported conditions on suitable substrates via Julia–Kocienski olefination, intramolecular lactonization, and subsequently dehydroxylative olefination, (–)-(S)-goniothalamin was synthesized. Then Sharpless asymmetric dihydroxylation–intramolecular Michael addition on (–)-(S)-goniothalamin provided (–)-leiocarpin A.     

An Examination of the Coordination Chemistry of L2Pt(1,2-DITHIOLENES) Using Atmospheric Pressure Chemical Ionization Mass Spectrometry

Abstract

Atmospheric pressure chemical ionization mass spectrometry (APCI–MS) has been utilized in the characterization of two series of platinum dithiolene complexes, (COD)Pt(dt) 1, (COD)–Pt(edt) 2, (COD)Pt(dmid) 3, (COD)Pt(mnt) 4, (COD)Pt(eddo) 5, (COD)Pt(dddt) 6 and (Ph₃P)₂Pt(dt) 7, (Ph₃P)₂Pt(edt) 8, (Ph₃P)₂Pt(dmid) 9, (Ph₃P)₂Pt(dmit) 10, (Ph₃P)₂Pt(mnt) 11 (where COD = 1,5–cyclooctadiene, dt = ethane–1,2–dithiolate, edt = ethylene–1,2–dithiolate, dmid = 1,3–dithiole–2–oxo–4,5–dithiolate, dmit = 1,3–dithiole–2–thione–4,5–dithiolate, mnt = maleonitrile–1,2–dithiolate, eddo = 4–(ethylene–1′,2′–dithiolate)–1,3-dithiole–2–one, and dddt = 5,6–dihydro–1,4–dithiin–2,3–dithiolate). The series that contains triphenylphosphine is labile toward the loss of HPPh₃ ⁺. In addition, an orthometallated species involving the platinum and triphenylphosphine is identified. A dimer is identified for 2, which is shown to be a product of the experiment and not present in the parent material. In addition, a 1:1 adduct with NH₄ ⁺ is identified for 4 and 11 where the NH₄ ⁺ originates from the acid hydrolysis of acetonitrile. Finally, a highly unique ion, Pt⁺, a bare platinum ion, is observed in all COD complexes indicating that a radical mechanism must accompany the decomposition of the COD complexes during the fragmentation process.     

Thermogravimetric investigations of new γ-γ′ cobalt-based superalloys

The aim of the study is characterization of high-temperature oxidation behavior of new Co-based superalloys by thermogravimetry (TG). The following alloys have been taken into account: Co–9Al–9W, Co–20–Ni–7Al–7W, Co–10Al–5Mo–2Nb and Co–20Ni–10Al–5Mo–2Nb (at.%). The thermogravimetric analysis was carried out in the temperature range 40–1200 °C of heating rate 5° min^?1. The investigation was performed using the thermal analyzer NETZSCH STA 449 F3 Jupiter. TG–DTG plots showed oxidation behavior up to 1200 °C and indicated the temperatures of further isothermal oxidation examinations. The oxidation behavior of basic Co–9Al–9W (at.%) alloy was compared to W-free Co–10Al–5Mo–2Nb and Co–20Ni–10Al–5Mo–2Nb (at.%) alloys. The obtained data showed different oxidation behavior dependably on the type of alloying elements. Moreover, the effect of Ni addition on oxidation performance was determined. The scales grown on Co-base superalloys after thermogravimetry were evaluated by means of scanning electron microscopy and energy dispersive spectroscopy.     

Preparation of Nanoscrolls by Rolling up Graphene Oxide–Polydopamine–Au Sheets using Lyophilization Method

Graphene oxide–polydopamine–Au (GO–PDA–Au) nanoscrolls were prepared by rolling up GO–PDA–Au sheets through a simple lyophilization method. The structure of GO–PDA–Au nanoscrolls and GO–PDA–Au sheets were compared by powder X‐ray diffraction, Raman spectra, transmission electron microscopy, and scanning electron microscopy. The results demonstrated that the heterogeneous GO–PDA–Au nanoscrolls were synthesized successfully. Polydopamine (PDA) attached at the surface of GO sheets served as binding reagents to anchor and disperse Au nanoparticles (NPs). The electrocatalytic activity of methanol with GO–PDA–Au nanoscrolls and GO–PDA–Au sheets as electrodes were conducted. Compared to GO–PDA–Au sheets, GO–PDA–Au nanoscrolls showed better electrocatalytic activity and electrochemical stability owing to their scrolled structure. This article provides a simple and effective method to prepare GO nanoscrolls containing metal NPs that broadens the applications of the graphene‐based materials in optical, magnetic, and catalytic fields.     

Synthesis and reactions of a poly(methacrylate) from an optically active amino alcohol

Synthesis and radical polymerization of a novel optically active methacrylate, (S)–2–tert–butoxycarbonylamino–3–phenylpropyl methacrylate (MA–F–BOC), were examined. MA–F–BOC was synthesized from methacrylic acid and N–protected (L)–phenylalaninol. Radical polymerization of MA–F–BOC quantitatively afforded the corresponding polymethacrylate with a relatively high molecular weight. Radical copolymerizations of MA–F–BOC were carried out with styrene and acrylamide to afford the copolymers. Radical polymerization of MA–F–BOC in the presence of n–butanethiol afforded the oligomers, whose degrees of polymerizations were 3.3–8.0. The BOC group was completely cloven with HBr to afford the corresponding optically active polymeric amine quantitatively. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1981–1986, 1998