接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

接枝共聚物聚苯乙烯－g－聚氧乙烯的微相分离形态研究

 本文利用透射电子显微镜技术，以两性接校共聚物聚苯乙烯－ｇ－聚氧乙烯为研究对象，研究了接枝共聚物的微相分离形态结构，发现聚苯乙烯－ｇ－聚氧乙烯能形成微相分离结构，微区的形状和尺寸与共聚物的组成和侧链长度有关．文中还讨论了嵌段共聚物和接枝共聚物在形成微相分离结构时的共性和个性．     

动态密度泛函理论在嵌段共聚物介观结构模拟中的应用

采用动态密度泛函理论(DDFT)方法对两嵌段和三嵌段共聚物熔体微相分离后的三维介观结构进行了模拟研究,考察了共聚物链长．N—12下组分A、B不同配比的11种两嵌段共聚物和10种三嵌段共聚物,通过等密度面图很好地表述了微相分离后的三维介观结构。通过比较序参数户、自由能F和熵S随时间的变化,发现当组分A与组分B的链节数之比．NA／NB和模拟参数均相同时,两嵌段共聚物熔体比三嵌段共聚物熔体容易发生微相分离,而三嵌段共聚物越不对称,微相分离越容易。     

PDMS-MDI-PEG多嵌段共聚物涂层表面微相分离行为研究

采用两步溶液聚合方法合成了一系列聚二甲基硅氧烷(PDMS)-4,4′-二苯基甲烷二异氰酸酯(MDI)-聚乙二醇(PEG)多嵌段共聚物.利用轻敲模式原子力显微镜(AFM)观察了嵌段共聚物的表明形貌,研究了退火、共聚物组成以及PEG分子量和不同的官能团对涂层表面微相分离行为的影响,同时对微相分离行为的形成机理也作了相应的探讨.研究表明,该嵌段共聚物即使在PDMS含量大于50wt%时,涂层表面仍呈现出规整有序的纳米级相分离结构,其中疏水相和亲水相分别由PDMS链段和MDI-PEG组分构成.     

嵌段共聚物的微相分离及其质子交换膜性能

嵌段共聚物由于自身嵌段之间的热力学不相容性,容易发生微相分离而形成质子传导通道,并且采用可控活性聚合的方法可设计合成具有特定拓扑结构嵌段共聚物,使之成为最具潜力的一类质子交换膜材料。本文从用于质子交换膜的嵌段共聚物的微相分离热力学理论出发,分析了影响嵌段共聚物微相分离的各类因素,其中包括磺化度、共聚物拓扑结构、嵌段长度、嵌段序列分布、微观聚集结构以及表面形貌等,并对该领域未来的发展做了展望。     

聚合物链长及表面吸附强度对三维受限下嵌段共聚物微观相分离的影响

利用动态密度泛函(Dynamic density functional theory, DDFT)方法研究了三维受限下嵌段共聚物的微观相分离, 讨论了共聚物链长和表面吸附强度对微观相形成与取向的影响. 体系中随机分布的等径微球提供三维限制结构, 体积分数为0.6. 增加微球的半径和体积分数, 能够使其从破坏微相规整结构的纳米掺杂过渡到提供三维限制结构. 调整嵌段共聚物与微球表面的相互作用对微相形成与取向有重要影响.     

二维核磁共振法研究线型聚乙二醇与树枝状聚苄醚形成的三嵌段共聚物

嵌段共聚物是由几个不同的高分子链段通过化学键相连所构成的 .在合成方法上一般是通过几类不同的活性聚合 ,调控单体的加料次序或者通过不同的大分子链段末端的反应活性点偶联而成[1～ 3 ] .所形成的化学键将嵌段共聚物中不相溶的几段相连 ,于是在特定的条件下就产生了微相分离的现象 ,继而可以在 1 0～ 1 0 0nm尺度范围内形成各种各样的微区结构[4,5] .在过去的几十年里 ,研究的重点是认定嵌段共聚物的微区结构和研究微相分离的动力学 ,已发表了大量重要的结果 ,至今仍然是高分子科学中的热门课题 .非常重要的一点是 ,正是由于不同的高分…     

聚甲基丙烯酸β羟乙酯在聚乙烯膜上辐射接枝物的形态结构

本文用透射电子显微镜(TEM),光学显微镜(OM),小角X射线散射(SAXS)等方法研究了聚甲基丙烯酸β羟乙酯(HEMA)在聚乙烯(PE)膜上辐射接枝物的形态结构.观察了微相结构随接枝条件变化规律.HEMA为支链的接枝共聚物的基本形态是高度分散的HEMA微区(约几百A)存在于PE连续相中的两相体系.随接枝量增加,微区形态发生变化.SAXS结果进一步证实了接枝共聚物相分离的形态结构,并利用Tsvankin-Buchanan公式计算了共聚物的长周期、无定形层厚及一维结晶度.     

中国嵌段共聚物受限自组装的研究进展

近年来,嵌段共聚物在受限空间中的自组装已成为高分子科学领域一个新的关注点.在受限条件下,嵌段共聚物展现出更多的可调控性,可获得复杂多样的微相分离结构.这些新颖的结构为实现嵌段共聚物更加丰富的功能奠定了材料基础.中国的学者们在嵌段共聚物受限自组装的理论模拟和实验研究方面取得了一系列重要创新成果,有力地推动了该领域的发展.本文总结和评述了中国学者在该领域的研究进展,并展望了嵌段共聚物受限自组装研究未来发展的机遇与挑战.     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

PP-g-(GMA-co-St)对PA6/PC共混物的反应增容作用

用红外、扫描电镜、熔体流动速率和力学性能等测试方法,研究了甲基丙烯酸缩水甘油酯(GMA)和苯乙烯(St)多单体熔融接枝聚丙烯[PP-g-(GMA-co-St)]对PA6/PC共混物的反应增容作用.研究结果表明,在熔融共混过程中,PP-g-(GMA-co-St)中的环氧基与PA6的端氨基及PC的端羟基原位生成的接枝共聚物有效地降低了共混物相间的界面张力,明显提高了共混物相界面的粘着力.少量的PP-g-(GMA-co-St)就能使PA6和PC的相容性得到显著改善.当PP-g-(GMA-co-St)的质量分数为10%时,共混物分散相的相区尺寸细化到0.2μm,其力学性能也有较大提高.PA6/PC/PP-g-(GMA-co-St)共混物的力学性能均衡,达到了弹性体增韧体系难以达到的效果.即使PP-g-(GMA-co-St)组分含量为20%时,共混物仍能保持较好的力学性能,特别是在共混物的韧性得以提高的同时,其强度和伸长率也提高.     

PA6/HIPS/PP-g-(GMA-co-St)反应共混体系的研究

通过扫描电镜、热分析、熔体流动速率、熔融扭矩和力学性能等测试方法研究了甲基丙烯酸缩水甘油酯(GMA)和苯乙烯(St)多单体熔融接枝聚丙烯[PP-g-(GMA-co-St)]对PA6/HIPS共混物的熔融流变性能、结晶行为、相形态和力学性能的影响.结果表明,在熔融共混过程中,PP-g-(GMA-co-St)中的环氧基与PA6的端氨基原位生成的接枝共聚物有效地降低了共混物的界面张力,提高了共混物的界面粘着力,使共聚物的流动速率降低,熔融扭矩提高;PA6分子链的规整性降低,结晶完善性变差.在PP-g-(GMA-co-St)的质量分数为10%时,共混物分散相的尺寸明显减少,力学性能得到较大提高;其中冲击强度超过纯PA6,达到HIPS水平.通过反应共混,制备了力学性能均衡的PA6/HIPS/PP-g-(GMA-co-St)共混物合金.     

多单体熔融接枝聚丙烯的微相分离结构

用熔融接枝方法制备了一系列不同接枝率的GMA(甲基丙烯酸缩水甘油酯)/St(苯乙烯)多单体接枝聚丙烯[PP-g-(GMA-co-St)],基体聚丙烯包括均聚聚丙烯和共聚聚丙烯(乙烯的摩尔分数分别是6.0%,12%,33%).接枝聚丙烯经过分离提纯后,用四氧化钌(RuO₄)进行染色,然后用透射电子显微镜(TEM)观察其微观形态.发现在接枝聚丙烯中形成了长程有序的、球状的微相分离结构,这种在分子量和分子结构都是多分散体系中形成的微相分离结构尚未见报道.同时,研究了基体聚丙烯中乙烯链段的含量以及接枝率对于接枝聚丙烯微观形态的影响.     

Reactively and physically compatibilized immiscible polymer blends: stability of the copolymer at the interface

This paper reports on the interfacial behaviour of block and graft copolymers used as compatibilizers in immiscible polymer blends. A limited residence time of the copolymer at the interface has been shown in both reactive blending and blend compatibilization by preformed copolymers. Polystyrene (PS)/polyamide6 (PA6), polyphenylene oxide (PPO)/PA6 and polymethylmethacrylate (PMMA)/PA6 blends have been reactively compatibilized by a styrene-maleic anhydride copolymer SMA. The extent of miscibility of SMA with PS, PPO and PMMA is a key criterion for the stability of the graft copolymer at the interface. For the first 10 to 15 minutes of mixing, the in situ formed copolymer is able to decrease the particle size of the dispersed phase and to prevent it from coalescencing. However, upon increasing mixing time, the copolymer leaves the interface which results in phase coalescence. In PS/LDPE blends compatibilized by preformed PS/hydrogenated polybutadiene (hPB) block copolymers, a tapered diblock stabilizes efficiently a co-continuous two-phase morphology, in contrast to a triblock copolymer that was unable to prevent phase coarsening during annealing at 180°C for 150 minutes.     

Phase morphology development in PP/PA6 blends induced by a maleated thermoplastic elastomer

The effects of maleated thermoplastic elastomer (TPEg) on morphological development of polypropylene (PP)/polyamide 6 (PA6) blends with a fixed PA6 content (30 wt %) were investigated. For purpose of comparison, nonmaleated thermoplastic elastomer (TPE) was also added to the above binary blends. A comparative study of FTIR spectroscopy in above both ternary blends confirmed the formation of in situ graft copolymer in the PP/PA6/TPEg blend. Dynamic mechanical analysis (DMA) indicated that un‐like TPE, the incorporation of TPEg remarkably affected both intensity and position of loss peaks of blend components. Scanning electron microscopy (SEM) demonstrated that PP/PA6/TPE blends still exhibited poor interfacial adhesion between the dispersed phase and matrix. However, the use of TPEg induced a finer dispersion and promoted interfacial adhesion. Transmission electron microscopy (TEM) for PP/PA6/TPEg blends showed that a core‐shell structure consisting of PA6 particles encapsulated by an interlayer was formed in PP matrix. With the concentration of TPEg increasing, the dispersed core‐shell particles morphology was found to transform from discrete acorn‐type particles to agglomerate with increasing degree of encapsulation. The modified Harkin's equation was applied to illustrate the evolution of morphology with TPEg concentration. “Droplet‐sandwiched experiments” further confirmed the encapsulation morphology in PP/PA6/TPEg blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1050–1061, 2006     

On the macro- and microphase separation of compatibilizers in immiscible polymer blends

Macro- and microphase separation of compatibilizing graft copolymers in melt-mixed polystyrene/polyamide-6 blends was studied by transmission electron microscopy and thermal analysis. Three different graft copolymers with main chains of polystyrene and side chains of poly(ethylene oxide) were used as additives at various concentrations. The polyamide-6 domain sizes decreased with increasing amounts of compatibilizing graft copolymers in the blends up to a saturation concentration, after which no further reduction was noted. Macrophase separation of the graft copolymers into discrete macrodomains 20–200 nm in size occurred at concentrations equal to or slightly lower than the saturation concentration. The macrodomains of the graft copolymers were microphase separated, and the sizes and shapes of the microdomains were found to largely depend on the graft copolymer structure and composition. As a consequence of microphase separation, poly(ethylene oxide) crystallinity was noted in blends with sufficiently high macrophase contents. Observations of a graft copolymer interphase between the polystyrene matrix and the polyamide-6 domains confirmed that the graft copolymer was present at the blend interfaces in some of the compatibilized blends. © 1996 John Wiley & Sons, Inc.     

HIPS／MA接技共聚物对HIPS／PA1010共混体系的增容

制备了高抗冲聚苯乙烯和马来酸酐的接枝共聚物，利用红外光谱，电子能谱和动态力学谱对产物的结构进行了表征，并通过滴定法测定了接枝物中马来酸酐的含量。结果表明马来酸酐接技到了高抗冲聚苯乙烯中顺丁橡胶的分子链上，接技率为４．７％。研究了该接枝共聚物对ＰＡ１０１０／ＨＩＰＳ共混物的增容作用。电镜照片显示，随着共聚物中接枝物含量的增加，分散相相区尺寸明显减小，说明增容效果显著。测定了共混体系的拉伸行为，研究了     

Effect of maleic anhydride‐grafted polytetrafluoroethylene on the tensile and tribological properties of blending polytetrafluoroethylene with polyamide‐6

Blending polytetrafluoroethylene (PTFE) to polyamide‐6 (PA6) with and without maleic anhydride‐grafted polytetrafluoroethylene (PTFE‐g‐MA) was produced in a corotating twin screw extruder, where PTFE acts as the polymer matrix and PA6 as the dispersed phase. The effect of PTFE‐g‐MA on the tensile properties and tribological propertiesof PTFE/PA6 polymer blends is studied. Results show that the structural stability and morphology of the blends were greatly improved by PTFE‐g‐PA6 grafted copolymers, which were formed by the in situ reaction of anhydride groups with the amino end groups of PA6 during reactive extrusion forming an imidic linkage. The presence of PTFE‐g‐PA6 in the PTFE continuous phase improves the interfacial adhesion, as a result of the creation of an interphase that was formed by the interaction between the formed PTFE‐g‐PA6 copolymer in situ and both phases. Compared with thePTFE/PA6 without PTFE‐g‐MA, the PTFE/PA6 with PTFE‐g‐MAhad the lowest friction coefficient and wear under given applied load and reciprocating sliding frequency. The interfacial compatibility of the composite prevented the rubbing‐off of PA6, accordingly improved the friction and wear properties of the composite. Copyright © 2009 John Wiley & Sons, Ltd.     

The effect of compatibilizers on the crystallisation, melting and polymorphic composition of β-nucleated isotactic polypropylene and polyamide 6 blends

Non-compatibilized and compatibilized blends of isotactic polypropylene (iPP) and polyamide 6 (iPP/PA6) as well as their β-nucleated versions were prepared using maleic anhydride functionalized iPP (MAPP) with different anhydride contents as compatibilizer. Ca-suberate, a highly efficient and selective β-nucleating agent was added to the blends in order to promote the formation of the β-modification of iPP. The melting and crystallisation characteristics, as well as the polymorphic composition of the blends were studied by differential scanning calorimetry (DSC). The supermolecular and phase structure of the blends were studied by polarised light microscopy (PLM). iPP and PA6 form blends with heterogeneous phase structure; the PA6 component is dispersed in the iPP matrix in the concentration range studied. The compatibilizer promotes the dispersion of PA6 resulting in smaller particles than without MAPP. In the non-compatibilized β-nucleated blends, an iPP matrix consisting mainly of the α-modification was formed already at low PA6 content. On the contrary, predominantly β-iPP matrix developed in the presence of MAPP compatibilizers. The formation of α-iPP matrix in the absence of compatibilizer is related to the selective encapsulation of the nucleating agent in the polar PA6 phase. The influence of the blending technique on the polymorphic composition of the matrix supports the hypothesis of selective encapsulation. Compatibilizers, besides their traditional benefits assist the distribution of the β-nucleating agent between both phases of the blends and promote the formation of a matrix rich in β-iPP. In the presence of β-nucleating agent MAPP with low anhydride content and blends of iPP containing maleated polypropylene crystallise predominantly in the β-form.     

ABS的MAH/St多单体熔融接枝及其对PA6/ABS共混体系相形态和力学性能的影响

通过多单体熔融接枝的方法制备出了具有较高接枝率的ABS接枝物 (ABS g (MAH co St) ) ,并对其接枝机理进行了初步探讨 .研究表明 ,MAH、St接枝ABS时 ,反应主要发生在ABS中聚丁二烯的双键部位 .同时 ,当MAH与St的用量比约为 1:1时接枝率达到最高 .ABS g (MAH co St)作为尼龙 6 (PA6 ) ABS共混体系相容剂起到了良好的增容效果 .实验证明 ,相容剂使用前后 ,共混物的相区尺寸由几十 μm减小到 1μm以下 ,且分布更加均匀 ;共混物的拉伸强度和冲击强度等力学性能也同时得到均衡改善 .