Adsorption of hydrocarbons on mesoporous SBA-15 and PHTS materials

Plugged hexagonal templated silica (PHTS) materials are synthesized using a high TEOS/EO(20)PO(70)EO(20) ratio in the SBA-15 synthesis. This generates internal microporous nanocapsules or plugs in part of the channels, which could be inferred from the two-step desorption branch. These materials exhibit a tunable amount of open and plugged pores and a very high micropore volume (up to 0.24 mL/g) and are more stable than the conventional micellar templated structures known so far. In this study the adsorption properties of PHTS are investigated and compared to those of its plug-free analogue SBA-15. For this purpose nitrogen, n-hexane, n-heptane, c-hexane, 3-methylpentane, 1-hexene, and water were adsorbed on SBA-15 and PHTSs with a different ratio of open and plugged mesopores. The adsorption of n-hexane, c-hexane, n-heptane, and 3-methylpentane on SBA-15 and PHTS-A demonstrated that the presence of the plugs had an effect on the uptake of adsorbate in the low relative pressure region, the position of the capillary condensation step, and the total adsorbed amount of adsorbate. The results showed that n-heptane and 3-methylpentane cannot access part of the micropore system of SBA-15 and PHTS-A. Adsorption of c-hexane and n-hexane on PHTS-A indicated that not only the kinetic diameter but also the shape of the molecule is an important factor for being able to be adsorbed into the micropores or past the plugs. Moreover, these two adsorbates were the most efficient in filling up the available pore volume. From the adsorption of n-hexane on PHTSs with a different ratio of open and plugged pores, it was concluded that the size of the plugs differed, which depends on the synthesis conditions. Water adsorption isotherms proved SBA-15 and PHTS-B to be more hydrophobic than PHTS-A. n-Hexane, 1-hexene, and toluene were adsorbed on SBA-15 and the PHTSs to investigate the influence of the polarity of the adsorbate. The isotherms showed higher uptakes for polar adsorbates on more hydrophobic materials and vice versa.     

Guest-host encapsulation of microporous zeolites in ordered mesoporous materials by molecular simulations

The present work provides the first study of ordered mesoporous materials SBA-15 coated with microporous zeolites ZSM-5 using molecular simulations. Several model structures with characteristics such as periodic arrangement of mesopores, randomly arranged micropores, surface hydroxyls and bulk deformations of SBA-15 were used. Cartesian coordinates of ZSM-5 unit lattice were obtained from the literature and the 100 face of H-ZSM-5 unit cell was then placed on the surface of SBA-15 and the entire structure was equilibrated to obtain final configuration. The resulting structure was characterized using simulated small angle and wide angle X-ray diffraction, Connolly surface area (to compare BET area), accessible pore volume for nitrogen molecules (to compare with t-plot volume of micro and mesopores) and methane adsorption at 303 K. The orientation of ZSM-5 on the SBA-15 had no effect on the surface area, pore volume or adsorption capacity. In order to find out if the addition of microporous ZSM-5 should increase the total methane adsorption capacity due to addition of micropores, we studied adsorption on bare and coated SBA-15. However, total adsorption capacity was found to decrease, while the number of methane molecules adsorbed per unit cell of the SBA-15 structure increased. An existing experimental method (J. Am. Chem. Soc., 2004, 126, 14324) of the synthesizing hybrid ZSM-5/SBA-15 structure was studied using accessible micropore volume (by t-plot). It was found that the procedure made all the micropores inaccessible. A modification of the method or use of other host materials is suggested to use the benefits of narrow micropore distribution in ZSM-5.     

Adsorption of C7 hydrocarbons on biporous SBA-15 mesoporous silica

In our recent studies (Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Langmuir 2005, 21, 2051-2057; Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Stud. Surf. Sci. Catal. 2005, in press), a series of synthesized SBA-15 materials were characterized using nitrogen adsorption/desorption isotherms at 77 K and SEM images. In the present paper, four of them (MMS-1-RT, MMS-1-60, MMS-1-80, and MMS-5-80) were further investigated with regard to their equilibrium characteristics using n-heptane and toluene as sorbates by the standard gravimetric technique. SBA-15 materials proved to have a broad pore size distribution within the micropore/small-mesopore range in the walls of their main mesoporous channels. The adsorption capacities for toluene were found to be higher than for n-heptane. The isosteric heats of adsorption, estimated by the Clausius-Clapeyron equation, are also higher for toluene compared to n-heptane. They were found to depend on framework microporosity of the relevant SBA-15 samples. The isosteric heats of adsorption for all sorbates decrease with increased loading and approach the heats of evaporation of the respective sorbate. The adsorption capacities of SBA-15 samples are significantly higher than those of silicalite, i.e., the MFI zeolite silica analogue. In contrast to that, the isosteric heats of adsorption in the mesopore channels of SBA-15 were found to be much smaller. This result also suggests that SBA-15 can potentially be a good candidate for separation of C(7) hydrocarbons.     

Physical state of poorly water soluble therapeutic molecules loaded into SBA-15 ordered mesoporous silica carriers: a case study with itraconazole and ibuprofen

The ordered mesoporous silica material SBA-15 was loaded with the model drugs itraconazole and ibuprofen using three different procedures: (i) adsorption from solution, (ii) incipient wetness impregnation, and (iii) heating of a mixture of drug and SBA-15 powder. The location of the drug molecules in the SBA-15 particles and molecular interactions were investigated using nitrogen adsorption, TGA, DSC, DRS UV-vis, and XPS. The in vitro release of hydrophobic model drugs was evaluated in an aqueous environment simulating gastric fluid. The effectiveness of the loading method was found to be strongly compound dependent. Incipient wetness impregnation using a concentrated itraconazole solution in dichloromethane followed by solvent evaporation was most efficient for dispersing itraconazole in SBA-15. The itraconazole molecules were located on the mesopore walls and inside micropores of the mesopore walls. When SBA-15 was loaded by slurrying it in a diluted itraconazole solution from which the solvent was evaporated, the itraconazole molecules ended up in the mesopores that they plugged locally. At a loading of 30 wt %, itraconazole exhibited intermolecular interactions inside the mesopores revealed by UV spectroscopy and endothermic events traced with DSC. The physical mixing of itraconazole and SBA-15 powder followed by heating above the itraconazole melting temperature resulted in formulations in which glassy itraconazole particles were deposited externally on the SBA-15 particles. Loading with ibuprofen was successful with each of the three loading procedures. Ibuprofen preferably is positioned inside the micropores. In vitro release experiments showed fast release kinetics provided the drug molecules were evenly deposited over the mesoporous surface.     

The relationship between micro- and mesoporous substructures upon removal of colloidal silica from porous glasses subjected to alkaline treatment

The effect of alkaline treatment of two basal liquation sodium borosilicate porous glasses on their micro- and mesoporous substructures has been studied. The morphology of pores has been investigated and the structural characteristics of micro- and mesoporosity have been determined by the equilibrium and kinetic adsorption-desorption methods at low, moderate, and high relative pressures. It has been established that the alkaline treatment leads to a substantial increase in the volume of mesopores and a noticeable decrease in the volume of micropores, which correlates with a reduction in the specific surface area of the mesopores. After the alkaline treatment, the trimodal distribution and the average diameter (0.5–0.6 nm) of micropores remain unchanged and ultramicropores do not arise in the range of 0.27–0.37 nm. It has been concluded that micropores represent only the regions of interglobular contacts of secondary silica in liquation channels with sizes of 1–2 diameters of an adsorbate molecule. The alkaline treatment is accompanied by the structuring and dissolution of silica globules in liquation channels; as a result, wide-porous glass samples with monomodal interglobular pores are obtained, while new micropores are not formed via the etching of channel walls in the glass matrix. Correlation dependences between the coordination number, porosity, and diameters of pores and globules of colloidal silica have been proposed for a large set of standard globular packings. It has been shown that, as the boron content in a porous glass rises, secondary silica globules in liquation channels grow, while their packing becomes looser.     

Single component and binary diffusion of n-heptane and toluene in SBA-15 materials

In this work, the diffusion properties of single component n-heptane and toluene as well as their binary mixtures in two SBA-15 samples with different structural characteristics were studied by the standard Zero Length Column (ZLC) technique under three different concentration levels. A theoretical ZLC desorption model considering the Generalized Maxwell-Stefan (GMS) formulation was developed. Using the independently measured single component equilibrium and kinetic parameters, the model was able to reasonably predict experimental binary ZLC desorption curve for countercurrent diffusion of toluene in the presence of n-heptane. However, there was a significant deviation between model prediction results and experimental data for countercurrent desorption of n-heptane in the presence of toluene. The diffusion of n-heptane is reduced by the presence of toluene, regardless of the relative content of micropores in the intrawall pores, while that of toluene is virtually unaffected by the counter-diffusion of n-heptane. The observed phenomena cannot be addressed by the simple model considering the cross term diffusion effect. The structural property of material and the molecular characteristics of probe molecules were used to account for the difference in the behavior between n-heptane and toluene.     

Molecular simulation of RMM: ordered mesoporous SBA-15 type material having microporous ZSM-5 walls

SBA-15 is a novel porous material with uniform size mesopores arranged in a regular pattern. The adjacent mesopores are connected to each other by microporous walls. The major disadvantages of these materials are that the walls are amorphous and have low thermal, hydrothermal, and mechanical stability. Recently, there have been a few attempts to either coat the walls of SBA-15 by microporous crystalline zeolites or to fabricate SBA-15 using CMK-3 in such a way that the walls are made up of ZSM-5. The present work provides a first-ever study of RMM (replicated mesoporous materials, which are SBA-15 like ordered mesoporous materials with walls made up of ZSM-5) using molecular modeling. A random orientation of the unit cells and the distribution of sizes of the supercells located at nucleation sites would be ideal to model the RMM. However, such a study would introduce more uncertainties with regard to voids between the individual supercells, noncrystalline silica, and the location of active sites where the nucleation occurs. In a simpler model studied in the present work, the walls of SBA-15 were made up of regularly arranged ZSM-5 having the same orientation. The structure was characterized by estimating the nitrogen accessible area/volume by Connolly surfaces, small-angle and wide-angle X-ray diffraction patterns, methane adsorption, and ice as a probe to study the pore structure. It was found that RMMs have significantly higher methane adsorption capacity compared to SBA-15 and the majority of methane is adsorbed in the microporous walls of RMM. Further research in the field of RMM is needed to obtain the details of zeolitic wall structure.     

Understanding effect of wall structure on the hydrothermal stability of mesostructured silica SBA-15

Mesostructured silica SBA-15 materials with different structural parameters, such as pore size, pore volume, and wall thickness, etc., were prepared by varying the postsynthesis hydrothermal treatment temperature and adding inorganic salts. The hydrothermal stabilities of these materials in steam (100% water vapor) were systematically investigated using a variety of techniques including powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and (29)Si solid-state NMR. The effect of the pore size, microporosity or mesoporosity, and wall thickness on the stability was discussed. The results show that all of the SBA-15 materials have a good hydrothermal stability under steam of 600 degrees C for at least 24 h. N(2) sorption measurements show that the Brumauer-Emmett-Teller surface area of SBA-15 materials is decreased by about 62% after treatment under steam at 600 degrees C for 24 h. The materials with thicker walls and more micropores show relatively better hydrothermal stability in steam of 600 degrees C. Interestingly, we found that the microporosity of the mesostructured silica SBA-15 is a very important factor for the hydrothermal stability. To the materials with more micropores, the recombination of Si-O-Si bonds during the high-temperature steam treatment may not cause direct destruction to the wall structure. As a result, SBA-15 materials with more micropores show better stability in pure steam of 600 degrees C. Nevertheless, these materials are easily destroyed in steam of 800 degrees C for 6 h. Two methods to effectively improve the hydrothermal stability are introduced here: one is a high-temperature treatment, and another is a carbon-propping thermal treatment. Thermal treatment at 900 degrees C can enhance the polymerization degree of Si-O-Si bonds and effectively improve the hydrothermal stability of these SBA-15 materials in 800 degrees C steam for 12 h. But, this approach will cause very serious shrinkage of the mesopores, resulting in smaller pore diameter and low surface area. A carbon-propping thermal treating method was employed to enhance the polymerization of Si-O-Si bonds and minimize the serious shrinkage of mesopores at the same time. It was demonstrated to be an effective method that can greatly improve the hydrothermal stability of SBA-15 materials in 800 degrees C steam for 12 h. Furthermore, the SBA-15 materials obtained by using the carbon-propping method possess larger pores and higher surface area after the steam treatment at 800 degrees C compared to the materials from the direct thermal treatment method after the steam treatment.     

Synthesis of an ordered porous carbon with the dual nitrogen-doped interfaces and its ORR catalysis performance

Both nitrogen-doping feature and pore structure are critical factors for developing nitrogen-doped carbons based catalysts with a high performance toward oxygen reduction reaction(ORR).Herein,a simple one-step CVD of acetylene and acetonitrile vapor method using silanized SBA-15 as a template has been developed to synthesize an ordered porous carbon(OPC) with dual nitrogen-doped interfaces.The optimized sample as prepared with the CVD of 4 h at 750℃ contains two types of ordered mesopores that one type is the ordered cylindrical pores inheriting from the pores of SBA-15 and has a pore width of4.0~5.0 nm,the other type is the ordered quasi-hexagonal pores with a width of 3.0~4.0 nm produced by etching the pore walls of SBA-15.These two types of pores whose pore walls are built by the nitrogen doped carbon layers resulted by the CVD and thus it actually makes the dual nitrogen-doped interfaced OPC(DN-OPC).Meanwhile,DN-OPC contains a few of micropores and a large SSA of 1430 m~2/g.This dualordered pores and dual nitrogen-doped interfaces cannot only facilitate mass transport but also utilize the active sites of DN-OPC for ORR.Therefore,as metal-free ORR catalyst,DN-OPC exhibits a good activity close to commercial Pt/C catalyst,and an excellent durability and methanol tolerance.     

Preparation of activated ordered mesoporous carbons with a channel structure

Activated ordered mesoporous carbons with a channel structure (AOMCs-CS) were successfully prepared by imposing CO(2) activation on ordered mesopore carbon C-FDU-15. It is found that the continuous carbon framework of the precursor C-FDU-15 plays an important role in keeping the order structure of the resulting AOMCs-CS. The mild activation (e.g., 31 wt % burnoff) does not impair the order degree. After that, the order degree gradually decreases with further increasing burnoff. However, the basic hexagonal mesostructure of C-FDU-15 can still be found in the AOMCs-CS when the burnoff is up to 73 wt %, although many carbon walls are punched and thus many larger mesopores and marcropores are generated. With increasing burnoff, the surface area and volume of micropores increase first and then decrease, and the surface area and volume of mesopores continuously increase. The highest measured Brunaruer-Emmett-Teller (BET) surface area, micropore volume, and total pore volume of the AOMCs-CS reach 2004 m(2)/g, 0.50 cm(3)/g, and 1.22 cm(3)/g, respectively.     

孔壁富含微孔有序介孔材料的设计合成及表征

通过调节水热处理溶液的酸度和温度,进而调控材料孔壁上硅羟基与模板剂的相互作用以及模板剂亲水嵌段嵌入到孔壁内的量,制备出了墙壁富含微孔的有序介孔材料SBA-15.氮气吸附测试表明,当水热处理溶液的pH值和温度分别为2.2和100℃时,经300℃焙烧脱除模板剂后的样品具有较高的微孔含量,其微孔体积为0.176cm3/g,占总孔体积的21.6%.     

Structural and sorption properties of carbon replicas obtained by matrix carbonization of organic precursors in SBA-15 and KIT-6

We have carried out a comparative study of matrix carbonization of some organic precursors (sucrose, polydivinylbenzene, polyphenol-formaldehyde, polyacrylonitrile, acetonitrile) in SBA-15 and KIT-6 silica mesoporous molecular sieves. We have shown that carbon mesoporous molecular sieves of the CMK-8 type, obtained in KIT-6 mesopores, have better adsorption characteristics due to the features of the three-dimensional cubic structure, the larger pore volume and thickness of the walls of the framework. The maximum micropore volume is observed in CMK-3 and CMK-8, obtained by carbonization of polyphenol-formaldehyde and polydivinylbenzene, while the greatest specific surface area is observed on carbonization of sucrose, where the maximum hydrogen adsorption capacity is achieved at a level of ∼1.4 wt.% (77 K, 1 atm). We show that the mesopore surface coverage by hydrogen in carbon mesoporous molecular sieves increases as the degree of graphitization increases.     

Mechanism of freezing of water in contact with mesoporous silicas MCM-41, SBA-15 and SBA-16: role of boundary water of pore outlets in freezing

The freezing mechanism of water contacted with mesoporous silicas with uniform pore shapes, both cylindrical and cagelike, was studied by thermodynamic and structural analyses with differential scanning calorimetry (DSC) and X-ray diffraction (XRD) together with adsorption measurements. In the DSC data extra exothermic peaks were found at around 230 K for water confined in SBA-15, in addition to that due to the freezing of pore water. These peaks are most likely to be ascribed to the freezing of water present over the micropore and/or mesopore outlets of coronas in SBA-15. Freezing of water confined in SBA-16 was systematically analysed by DSC with changing the pore size. The freezing temperature was found to be around 232 K, close to the homogeneous nucleation temperature of bulk water, independent of the pore size when the pore diameter (d) < 7.0 nm. Water confined in the cagelike pores of SBA-16 is probably surrounded by a water layer (boundary water) at the outlets of channels to interconnect the pores and of fine corona-like pores, which is similar to that present at the outlet of cylindrical pores in MCM-41 and of cylindrical channels in SBA-15. The presence of the boundary water would be a key for water in SBA-16 to freeze at the homogeneous nucleation temperature. This phenomenon is similar to those well known for water droplets in oil and water droplets of clouds in the sky. The XRD data showed that the cubic ice I(c) was formed in SBA-16 as previously found in SBA-15 when d < 8.0 nm.     

Iron oxide nanoparticles within the pore system of mesoporous SBA-15 in different acidity: the synthesis and characterization

Direct hydrothermal method is employed for incorporating iron into the pore structure of SBA-15. The resultant materials were analyzed by X-ray diffraction (XRD) patterns, N₂ sorption isotherm and X-ray photoelectron spectroscopy (XPS). The characterizations of XRD patterns and XPS revealed that iron nanoparticles were present as highly dispersed nanoclusters in the well-ordered mesoporous channels of SBA-15. The characterizations of t-plot reveal only microporous channels of SBA-15 are confirmed to be filled with iron nanoparticles, leaving the mesopores unaffected. The supported material still maintained its ordered mesoporous structure similar to SBA-15 and possessed high surface area, large pore volume and uniform pore size.     

负载TS-1导向剂的介孔材料的合成、表征及催化性能研究

利用浸渍法将TS-1导向剂高度分散在介孔材料MCM-41和SBA-15的表面,制备出一系列在氧化反应中具有高活性的催化材料.对样品的表征显示催化剂保持了介孔的结构,同时具有四配位的钛物种均匀地分散于介孔催化剂的表面.催化结果显示,与钛硅分子筛(TS-1)相比,所制备的催化剂在小分子的氧化反应中表现出相似的活性,在大分子的氧化反应中展示了很高的活性,体现了介孔材料的优越性.     

Structural and diffusion characterizations of steam-stable mesostructured zeolitic UL-ZSM-5 materials

A series of mesoporous UL-ZSM-5 materials (Si/Al = 50) with different micro- and mesoporosity as well as crystallinity was prepared following the procedure proposed in one of our recent studies (Trong-On, D.; Kaliaguine, S. Angew. Chem. Int. Ed. 2001, 40, 3248-3251. Trong-On, D.; Kaliaguine, S. U.S. Patent 6,669,924, B1, 2003). These materials have zeolitic structure in the form of nanoparticles intergrown in the walls of the amorphous wormhole-like aluminosilicate mesopores of Al-Meso-50, which was used as a precursor in the synthesis. The structure, crystallinity, and textural properties of the synthesized materials, as well as a reference ZSM-5 zeolite sample, were determined by X-ray diffraction (XRD), transmission electron microscopy (TEM)/scanning electron microscoy (SEM) analyses, Fourier transform infrared spectroscopy (FTIR), 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR), and nitrogen adsorption/desorption techniques. The acid properties were examined by FTIR of adsorbed pyridine. UL-ZSM-5 materials were shown to be highly hydrothermally stable. The diffusion of two C7 hydrocarbons, i.e., n-heptane and toluene, in four UL-ZSM-5 materials with different microporosities, related acidities, and crystallinities were investigated using the zero-length column (ZLC) method. Furthermore, the wormhole-like mesostructured aluminosilicate precursor (Al-Meso-50) and a reference MFI zeolite sample were also investigated using the same technique. A theoretical model considering a combination of mesopore diffusion (with surface slip in the main channels) with an activated, mainly surface diffusion mechanism in the intrawall biporous structure, was proposed and employed to interpret the experimental ZLC results. A classical Knudsen type of diffusion was replaced by an activated surface slip type of diffusion mechanism in the mesopores. The transport of n-heptane in UL-ZSM-5 materials was found to be mainly controlled by mesopore diffusion in the main-channel structure, while that of toluene was dominated by the intrawall diffusion process. Diffusion activation energies of n-heptane are about 2 times higher in comparison to toluene, which has a larger kinetic diameter. The main mesopore channel structure seems to appreciably contribute to the overall mass transport. Furthermore, the effect of hydrothermal treatment (20% steam at 800 degrees C for 24 h) on the diffusion of these two sorbates on UL-ZSM-5 materials was also evaluated.     

Phase transitions of octamethylcyclotetrasiloxane confined inside aluminosilicate and silicate nanoporous matrices

We report the melting behaviour of a dipolar cyclic siloxane liquid: octamethylcyclotetrasiloxane (OMCTS) confined in three mesoporous silica matrices: Al-SBA-15, SBA-15 and CPG glasses, using differential scanning calorimetry and dielectric spectroscopy. We investigate the influence of acid sites on the adsorptive properties of mesoporous silica materials, which were synthesized by applying Pluronic-type polymers as pore-creating agents. Aluminosilicate matrices have been synthesized by direct synthesis procedure using aluminium chloride. These materials characterized by N₂ sorption measurements, and the small-angle X-ray scattering data exhibit the same hexagonal P6 mm structure with a mean mesopores size of 4.6 nm (Al-SBA-15) and 4.9 nm (SBA-15). The controlled pore glasses used in this experiment have pores of mean diameter of 7.5 nm. For all systems studied, the OMCTS melting point in pores has been found to decrease with decreasing pore diameter. This result is in qualitative agreement with that obtained in molecular simulation where the adsorbate-wall interactions are weak compared to the adsorbate–adsorbate interactions.     

Novel ice structures in carbon nanopores: pressure enhancement effect of confinement

We report experimental results on the structure and melting behavior of ice confined in multi-walled carbon nanotubes and ordered mesoporous carbon CMK-3, which is the carbon replica of a SBA-15 silica template. The silica template has cylindrical mesopores with micropores connecting the walls of neighboring mesopores. The structure of the carbon replica material CMK-3 consists of carbon rods connected by smaller side-branches, with quasi-cylindrical mesopores of average pore size 4.9 nm and micropores of 0.6 nm. Neutron diffraction and differential scanning calorimetry have been used to determine the structure of the confined ice and the solid-liquid transition temperature. The results are compared with the behavior of water in multi-walled carbon nanotubes of inner diameters of 2.4 nm and 4 nm studied by the same methods. For D(2)O in CMK-3 we find evidence of the existence of nanocrystals of cubic ice and ice IX; the diffraction results also suggest the presence of ice VIII, although this is less conclusive. We find evidence of cubic ice in the case of the carbon nanotubes. For bulk water these crystal forms only occur at temperatures below 170 K in the case of cubic ice, and at pressures of hundreds or thousands of MPa in the case of ice VIII and IX. These phases appear to be stabilized by the confinement.     

Adsorptive desulfurization by copper species within confined space

Copper species were incorporated into SBA-15 by solid-state grinding precursor with as-prepared mesoporous silica (SPA). The obtained materials (CuAS) were well-characterized by XRD, TEM, N(2) adsorption, H(2)-TPR, IR, and TG and compared with the material derived from calcined SBA-15 (CuCS). Surprisingly, CuO up to 6.7 mmol·g(-1) can be highly dispersed on SBA-15 by use of SPA strategy. Such CuO forms a smooth layer coated on the internal walls of SBA-15, which contributes to the spatial order and results in less-blocked mesopores. However, the aggregation of CuO takes place in CuCS material containing 6.7 mmol·g(-1) copper, which generates large CuO particles of 21.4 nm outside the mesopores. We reveal that the high dispersion extent of CuO is ascribed to the abundant silanols, as well as the confined space between template and silica walls provided by as-prepared SBA-15. The SPA strategy allows template removal and precursor conversion in one step, avoids the repeated calcination in conventional modification process, and saves time and energy. We also demonstrate that the CuAS material after autoreduction exhibits much better adsorptive desulfurization capacity than CuCS. Moreover, the adsorption capacity of regenerated adsorbent can be recovered completely.     

Activation energy of the reaction between hexacyanoferrate (Ш) and thiosulfate ions catalyzed by platinum nanoparticles confined in nanometer space

Pt nanoparticles (NPs) have been successfully encapsulated in SBA-15 mesoporous silica support. The silica was firstly functionalized by polyaminoamine (PAMAM) dendrimers with various generations and provided different nanometer space for Pt NPs. The growth of Pt NPs is restricted by the double confinement effect of PAMAM dendrimers and SBA-15 mesopores. The Pt NPs can be precisely controlled to localize inter- or intradendrimeric within SBA-15 tunnels. The different pore structures of Gn-PAMAM-SBA-15 (Gn-PS15) support have great influence on the catalytic performance of the encapsulated Pt NPs. The blocking structure of higher generation Gn-PS15 support debased the catalytic performance and increased the activation energy of reaction between Fe(CN)(6)(3-) and S(2)O(3)(2-) in a certain degree.