Saturated adsorption at the surface of binary solutions

Summary In order to examine the relationship between the saturated adsorption and the bulk critical phenomena (micelle formation, phase separation, solubility etc.), the surface tension was measured on the aqueous solutions of homologous sodium alkyl sulfates and pri-alkyl-alcohols. Adsorption isotherms for the solutions which did not possess any critical phenomenon, did not exhibit the saturation, whereas one for the solutions with some critical phenomenon displayed the saturation before the occurence of such a phenomenon in these solutions. From the thermodynamic interpretation, it was found for the alcohol solutions that the activity at the surface in the saturated region reaches the same value as in the bulk after phase separation.

---

Zusammenfassung An wäßrigen Lösungen von homologen Natrium alkylsulfaten und Alkyl-Alkoholen wurde die Oberflächenspannung gemessen, um die Beziehung zwischen der Sättigungsadsorption und den kritischen Erscheinungen (Mizellbildung, Phasentrennung, Löslichkeit usw.) zu erklären. Die Adsorptionsisothermen für Lösungen, welche keine kritischen Erscheinungen haben, zeigen keine Sättigung, während diejenigen von Lösungen mit kritischen Erscheinungen vor dem Auftreten derartiger Phänomene eine Sättigung erreichen. Die Aktivität der Alkohole erreicht in der Oberflächenphase des Sättigungsbereiches den gleichen Wert wie in der Volumenphase nach der Phasentrennung

     

The structure and chemical and acid-base state of the surface of solid solutions and binary components in the InSb-CdS system

The surface physicochemical properties, including microstructure, chemical composition, and acid-base surface properties, of solid solutions and binary components in the InSb-CdS system obtained for the first time were studied. Films of all the components had a polycrystalline structure with a nonuniform character of the distribution of crystallites, which associated into agglomerates. The chemistry of the surface was mainly determined by adsorbed H₂O and CO₂ molecules, OH⁻ groups, and, to a lesser extent, oxygen and hydrogen carbon compounds. The strength, concentration, and nature of acid centers were determined. Coordination-unsaturated In and Cd atoms, adsorbed water molecules, and OH-groups were responsible for acid-basic centers. Changes in the acid-base properties of the surface of InSb-CdS system components caused by composition variations were studied. They correlated with the “specific conductivity-composition” dependence, reflected the special features of donor-acceptor interactions in solid solutions, and could be used to predict adsorption-catalytic properties.     

Adsorption, electrophysical, and optical studies of the surface of solid solutions and the binary components of the InSb-ZnTe system

Piezoquartz microweighing, surface electroconductivity measurements, and IR and Raman spectroscopies were used to study the mechanism and regularities of the interaction of carbon monoxide, ammonia, and oxygen, gases of different electronic natures encountered in the environment and various technological processes, with the surface of solid solutions and the binary compounds of the InSb-ZnTe system. An analysis of the results with the use of the acid-base and other physicochemical characteristics of the adsorbents and of the electronic properties of the adsorbate molecules showed that the values of adsorption of the gases lie within α = 10⁻⁵−10⁻³ mol/m². It was demonstrated that, at temperatures above 293 K, the adsorption of CO and NH₃ occurs by the donor-acceptor mechanism, whereas oxygen is adsorbed through the ion-radical mechanism, with the predominant participation of coordinatively unsaturated metal atoms and vacancy defects, respectively. It was revealed that the acid-base, adsorption, electrophysical, and optical properties vary similarly with changing composition of the system, a behavior that suggests the same origin of adsorption sites and inherent surface states and makes it possible to predict the adsorption activity of a surface on the basis of its acid-base properties and the properties of the binary compounds and constituent elements. Similarities and distinctions in the behavior of (InSb) _x (ZnTe)_{1 − x} solid solutions and the binary compounds (InSb and ZnTe) were identified. Specific features of solid solutions, as multicomponent systems, are that adsorption on them is energetically more favorable, especially well pronounced in the acid-base characteristic-composition and adsorption characteristic-composition diagrams. Such diagrams made it possible to determine the solid solution most active with respect to ammonia, (InSb)_0.95(ZnTe)_0.05, which was used to make a selective high-sensitivity gas sensor.     

Equilibrium adsorption of binary mixtures of gases by zeolites and the state of the adsorption phase

A method for analyzing the state of the adsorption phase was developed on the basis of statistical thermodynamics for the case of equilibrium adsorption of binary gaseous mixtures. The procedure for treating experimental data to determine the Helmholtz energy and other thermodynamic functions of a mixture of molecules occluded within zeolite cavities was proposed. A measure of ideal behavior of a mixture of a small number of molecules in the micropore was formulated; in the asymptotic limit such a behavior leads to the Raoult law and to assumption of the validity of the Raoult law when moving along the line of constant value of the Gibbs integral in the ideal adsorption solution theory. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1927–1932, October, 1998.     

Successive adsorption of polyacrylamide compounds from electrolyte solutions on the surface of kaolinitic clay particles

Successive adsorption of oppositely charged polyelectrolytes, namely, cationic and anionic acrylamide copolymers, on a solid phase surface from solutions with high ionic strength is investigated. The constants of the Freundlich equation are calculated for the adsorption of different polymers. The interrelation between the adsorption values of polymers and their flocculation activity with respect to clay-salt suspensions is determined. The successive adsorption of oppositely charged polyelectrolytes strongly affects the flocculation due to the formation of polyelectrolyte complexes on the surface of clay particles. The mechanism for complexation is proposed.     

Chromatographic study of adsorption from binary and ternary solutions

Adsorption of benzene, anisole, and nitrobenzene on hydroxylated silica gel from binary and ternary solutions (adsorbate--n-hexane and adsorbate--n-hexane--terahydrofuran) was studied by HPLC. The equation that describes the adsorbate retention as a function of its concentration in binary and ternary solutions was proposed. The equation makes it possible to calculate the adsorption isotherms and adsorption equilibrium constants directly from chromatograms using the retention parameters and equilibrium concentrations of the adsorbate in the mobile phase.     

Determination of activity coefficients of binary adsorption solutions

Conclusions A method was prepared for calculating the activity coefficients of the components of adsorption solutions from specified curves, corresponding to constant values of the integral of the Gibbs equation, when binary gas mixtures are adsorbed on microporous adsorbents.Translated from Izvestiya Akademiya Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 166–168, January, 1972.     

Adsorption of gases on binary and multicomponent semiconductors of the ZnSe-CdTe system

Adsorption of carbon monoxide(II) and oxygen on powders and nanofilms of solid solutions and binary compounds of the ZnSe-CdTe system was studied volumetrically, and by piezoquartz microweighing and IR spectroscopy of multiple disturbed complete internal reflections. The mechanisms and principles of adsorption were established in dependence on the conditions of the habitus of an experimental sample and the composition of the system’s semiconductors, based on an analysis of IR spectra; the thermodynamic and kinetic characteristics of adsorption; experimental dependences αp = f(T), αT = f(P), and αT = f(t); and the acid-base and other physicochemical characteristics of adsorbents and the electron nature of adsorbate molecules. Conclusions drawn earlier as to the retention of local active centers on the surface of a diamond-like semiconductor (which are responsible for adsorption and catalytic processes) upon a change in the habitus of a sample were confirmed. Certain features in the behavior of solid solutions (ZnSe) _x (CdTe)_{1 − x} were revealed alongside commonalities with binary compounds (ZnSe, CdTe), testifying to the presence of critical points on “adsorption characteristics-composition” diagrams. The most active adsorbents (with respect to CO and O₂) were discovered on the basis of these diagrams, which were used in creating highly sensitive and selective sensors.     

The gas—solid interactions in physical adsorption of simple gases by porous non-uniform solid surfaces

A new method is proposed, to characterize the gas—solid interactions in the adsorption of simple gases by porous non-uniform solid surfaces. The theoretical bases are developed using Pierotti's statistical treatment of physical adsorption.     

Layer-by-layer adsorption of polyelectrolyte and surfactant and adsorption of their complexes on solid surface

The capillary electrokinetics method (measurement of streaming potential and current in a capillary with a radius of 5–7 μm made of fused quartz) is employed to study the structure formation at interfaces between quartz and solutions containing a cationic polyelectrolyte (poly(diallyldimethylammonium chloride) with molecular mass M = 100000−200000) and an anionic surfactant (sodium dodecyl sulfate). The kinetics of surface layer formation is studied upon the layer-by-layer adsorption of the components and the adsorption of their complexes at the same component ratios. It is established that the formation time and the electrokinetic potentials of the surface layers are almost independent of the procedure of their formation. In the case of the layer-by-layer adsorption, the first layers of the polyelectrolyte appear to be virtually undeformed, thus indicating that molecules with a planar conformation prevail in the adsorption layer. Surfactant adsorption enhances the deformation (layer loosening), which decreases with time (layer aging). Layers formed from the complexes have a denser (less deformable) structure. Variations in the electrokinetic potentials of the layers during the long-term pumping of a background electrolyte solution through a capillary witnesses the prevailing desorption of the anionic surfactant, with the desorption being noticeably more pronounced for the layers resultant from the adsorption of the complexes.     

Liquid-solid adsorption from binary component mixture

Based on five thermodynamic equilibria among the components Ⅰ,Ⅱ,and adsorbent,astoichiometric displacement model of adsorption(SDM-A)from binary liquid mixture with completerange of concentration in liquid-solid system is proposed and tested by using data published in litera-tures.The two expressions of this model show the quantitative relationships between the activity of thecomponent Ⅰ on the surface and that in the bulk solution and between its partition coefficient in twophases and its equilibrium activity in bulk solution,respectively.In some cases,the two expressionsmay become two linear equations,from which the correspondingly linear slopes(i.e.the adsorptionparameters)are obtained with which the stoichiometric displacement relation and relative adsorptionability between components Ⅰ and Ⅱ can be elucidated.The effectiveness of these two expressions fordifferent adsorption systems and the similarity and difference between SDM-A and the Freundlich Em-pirical Equation are also investigated.A rule illustrating a parallel relationship between 2n/Z and theproperty of bulk solution is also found.And,having studied the quantitative relation of the adsorptionfrom either ideal or non-ideal liquid mixture and compaired their linear adsorption parameters,we findthat SDM-A is much better than the Langmuir's.     

核磁共振法研究固体表面上的吸附

应用JEOL FX-90Q NMR谱仪测定了吸附在NaY分子筛,氧化铝,二氧化硅上的四甲基硅烷和正己烷的核磁氢谱和碳谱.结果表明,在一些吸附体系的研究中,现有仪器适用于液体样品,以氢谱和碳谱比较发现碳谱在分辨率分方面较之氢谱有几个优点,顺磁杂质对谱线宽度有明显影响.在NaY分子筛上预先吸附氢以后再吸附乙烯,其吸附速率低于未吸附氢的样品.     

亚砜类非离子型表面活性剂在固/液界面上的吸附I: 硅胶/水溶液界面上的吸附

测定了癸基和辛基-甲亚基亚砜在硅胶/水溶液界面的吸附以及溶液在石英界面的接触角. 研究了温度和pH值对吸附的影响. 吸附等温线似应归入Giles分类的L4型. 饱和吸附层的平均分子面积为27-30A^2. 二个同系物的γ/γ-c/cmc曲线彼此重叠. 吸附温度系数在低浓度范围是负性的在高浓度范围是正性的. 接触角的测量表面吸附使硅胶表面疏水. 从实验结果考虑到吸附过程由二个阶段组成: 一是在低浓度范围由固体表面和亚砜基之间的相互作用, 另一过程是在高浓度范围中, 被吸附的表面活性剂分子及其在溶液中的疏水作用.     

The reactions of benzofuroxan with carbonyl compounds on the surface of solid catalysts

The cyclocondensations of benzofuroxan 1a with carbonyl compounds were smoothly and efficiently carried out by the adsorption of the components on the surface of silica gel or a molecular sieve to form a 2,3-disubstituted quinoxaline 1,4-dioxide. When the reactions using a molecular sieve 3A (powder) were carried out at 90°, the actual reaction times were reduced to 0.5-2 hours. Although Duerckheimer has reported the isolation of only the 7-substituted quinoxaline 1,4-dioxide when 5-methoxybenzofuroxan 1e was allowed to react with ethyl acetoacetate 2j , it produced only the 6-methoxy isomer as the reaction product by our method. 5-Carboxybenzofuroxan 1f did not react with the carbonyl compound.     

Characteristic adsorption functions and the surface structure of solid adsorbents

A thermodynamic model of gas/solid adsorption has been constructed from two elements. The first is the original Gibbs equation. The second consists of functions psi(Theta) or psi(P) that are calculable from measured isotherms. Based on this model the characteristic adsorption functions (CAFs) were defined and calculated. The CAFs, which concentrate into one function all measured isotherms having the same change in relative free energy of the surface, are very sensitive to the structure of the adsorbents. This statement was tested with nitrogen isotherms measured at 77 K on well-characterized chemically/physically treated activated carbons prepared from poly(ethylene terephthalate). Changes in the surface structure were followed by small angle X-ray scattering (SAXS). This experimental approach made it possible to observe the correspondence between structural changes and the CAF.     

Nanostructure of polymer layers formed upon the adsorption from binary and ternary solutions

Thicknesses of nanolayers formed upon the adsorption from dilute and semidilute solutions of polystyrene, poly(butyl methacrylate), and their mixtures on the surface of solid SiO₂ are estimated on the basis of adsorption isotherms and atomic force microscopy measurements. It is established that the thickness of an adsorption layer is determined by the sizes of individual macromolecular coils and clusters arising in a solution. In the case of polymer blends, adsorption leads to the formation of mosaic structures with the alternation of polymeric components in the substrate plane; the characteristic size of a domain is ≈200 nm for each component. It is shown that adsorption layers formed on the surface of a silicon single crystal (covered with intact oxide) are fractal objects whose dimension depends on the nature of polymer and conditions of its adsorption.