Silica-gel-confined ionic liquids: a new attempt for the development of supported nanoliquid catalysis

A new concept of designing and synthesizing highly dispersed ionic-liquid catalysts was developed through physical confinement or encapsulation of ionic liquids (with or without metal complex) in a silica-gel matrix through a sol-gel process. We studied ionic liquids such as EMImBF4, BuMImBF4, DMImBF4, CMImBF4, BuMImPF6, either with or without [Pd(PPh3)2Cl2] and [Rh(PPh3)3Cl], in a silica-gel matrix (E = ethyl, Bu = butyl M = methyl, D = decyl, C = cetyl and Im = imidazolium). The contents of ionic liquids and loadings of Pd or Rh were 8-53 wt % and 0.1 approximately 0.15 wt %, respectively. Analyses of FT-Raman spectra showed that abnormal Raman spectra of the confined ionic liquids were observed in comparison with the bulk and pure ionic liquids. EMImBF4 and BuMImBF4 ionic liquids could be completely washed out from the silica-gel matrix under vigorous reflux conditions, but ionic liquids with larger molecular size, for example, DMImBF4 or CMImBF4, could be confined into the silica-gel nanopores relatively firmly. These results suggested that the ionic liquids were physically confined or encapsulated into the silica gel. The N2 adsorption measurements indicated that the silica-gel skeleton was mesoporous with 50-110 A pore size after the BuMImBF4 ionic liquid was removed completely. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis showed that the silica-gel matrix was amorphous and non-uniformly mesoporous. Carbonylation of aniline and nitrobenzene for synthesis of diphenyl urea, carbonylation of aniline for synthesis of carbamates, and oxime transformation between cyclohexanone oxime and acetone were used as test reactions for these catalysts. Catalytic activities were remarkably enhanced with much lower amounts of ionic liquids needed with respect to bulk ionic-liquid catalysts or silica-supported ionic-liquid catalysts prepared with simple impregnation, in which the ionic liquid may be deposited as a thin layer on the support. Such unusual enhancement in catalytic activities may be attributed to the formation of nanoscale and high-concentration ionic liquids due to the confinement of the ionic liquid in silica gel; this results in unusual changes in the symmetry and coordination geometry of the ionic liquids.     

Mesoporous and biocompatible surface active silica aerogel synthesis using choline formate ionic liquid

In this paper, we report the preparation and characterization of mesoporous and biocompatible transparent silica aerogel by the sol-gel polymerization of tetraethyl orthosilicate using ionic liquid. Choline cation based ionic liquid allows the silica framework to form in a non collapsing environment and controls the pore size of the gel. FT-IR spectra reveal the interaction of ionic liquid with surface -OH of the gel. DSC thermogram giving the evidence of confinement of ionic liquid within the silica matrix, which helps to avoid the shrinkage of the gel during the aging process. Nitrogen sorption measurements of gel prepared with ionic liquid exhibit a low surface area of 100.53 m2/g and high average pore size of 3.74 nm. MTT assay proves the biocompatibility and cell viability of the prepared gels. This new nanoporous silica material can be applied to immobilize biological molecules, which may retain their stability over a longer period.     

Effect of lithium salt on the stability of dispersions of fumed silica in the ionic liquid BMImBF4

We have investigated the stability and interactions in dispersions of colloidal fumed silica, Aerosil 200, and the ionic liquid 1-butyl-3-methylimidazolium tetraflouroborate (BMImBF(4)) as a function of the Li salt concentration (LiBF(4)). Photon correlation spectroscopy was used to study the aggregation behavior at low silica concentrations, and Raman spectroscopy was used to investigate the interactions in the ionic liquid and with the silica surface. We find that the addition of LiBF(4) increases the stability of the dispersions, with smaller agglomerates of silica particles and higher gelation concentrations in the presence of Li salt. The increased stability with the addition of Li salt is explained by the formation of a more stable solvation layer, where Li ions accumulate on the surface. This leads to an increased interaction between lithium ions and the BF(4)(-) anions in the solvation layer, as seen by Raman spectroscopy. Upon gelation, the Li ions are expelled from the surface because hydrogen bonding between the silica particles are formed. For both neat BMImBF(4) and Li-salt-doped BMImBF(4)/silica dispersions, a weak gel phase was found preceding the formation of a strong gel at slightly higher silica concentrations.     

离子液体限域于硅胶纳米孔道中的电化学行为研究(英文)

通过溶胶-凝胶法制备了硅胶包载咪唑类离子液体修饰电极,研究其与体相离子液体不同的伏安行为;另一方面,制备不同离子液体含量为15% ~ 28%的包载离子液体硅胶和涂覆离子液体硅胶,用电化学阻抗研究其在20 ^oC到80 ^oC下电导率的变化情况. 异常的电化学行为主要表现在：1)硅胶包载离子液体导致Fc/Fc⁺电对的半波电位正移63.5 ~ 200 mV;2)当离子液体限域于硅胶纳米孔道中时,离子液体的电化学稳定性变差;3)包载离子液体硅胶的电导率要比涂覆离子液体的电导率高29.6% ~ 136%. 由此推断,可能是由于离子液体充满硅胶孔腔和孔道从而形成了纳米网状的离子液体导电介质. 这些结果表明,硅胶包载离子液体不仅可以作为修饰电极的优良载体,而且也有助于理解离子液体限域于硅胶纳米孔道中的限域效应.     

Properties of Ionic Liquid Confined in Porous Silica Matrix

Porous silica matrices of different pore sizes with confined ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) [BMIM] [PF₆] were prepared by sol‐gel technique using a tetraethyl orthosilicate (TEOS) precursor with an aim to study the changes in physico‐chemical properties of ionic liquid on confinement. It is found that on confinement 1) melting point decreases, 2) fluorescence spectra shows a red shift and 3) the vibrational bands are affected particularly those of imadazolium ring, which interacts more with the walls of the silica matrix. Preliminary theoretical calculations suggest that SiO₂ matrix interact more with the heterocyclic group of [BMIM] cation than the tail alkyl chain end group resulting in significant changes in the aromatic vibrations.     

室温离子液体中催化合成肉桂酸苄酯

研究离子液体中肉桂酸钾和氯化苄经缩合合成肉桂酸苄酯的新方法,并对多种离子液体的作用性能进行了考察.研究结果表明,离子液体中BMImBF4的催化性能最佳,但是肉桂酸苄酯的收率仍不高,只有当相转移催化剂四丁基氯化铵存在时,肉桂酸钾与溶于离子液体中的氯化苄在温和的反应条件下才可高效率地得到肉桂酸苄酯,收率可达96.5%.产物分离简单,离子液体和相转移催化剂形成的双催化体系可以稳定地循环使用5次以上.     

Ambient Ionic Liquids Used in the Reduction of Aldehydes and Ketones

The sodium borohydride reduction of aldehydes and ketones to corresponding alcohols has been accomplished via the use of ionic liquids. The alcohols are easily obtained with excellent yields and the ionic liquid BMImBF4 could be reused.     

Specialist gelator for ionic liquids

Cyclo(l-beta-3,7-dimethyloctylasparaginyl-L-phenylalanyl) (1) and cyclo(L-beta-2-ethylhexylasparaginyl-L-phenylalanyl) (2), prepared from L-asparaginyl-L-phenylalanine methyl ester, have been found to be specialist gelators for ionic liquids. They can gel a wide variety of ionic liquids, including imizazolium, pyridinium, pyrazolidinium, piperidinium, morpholinium, and ammonium salts. The mean minimum gel concentrations (MGCs) necessary to make gels at 25 degrees C were determined for ionic liquids. The gel strength increased at a rate nearly proportional to the concentration of added gelator. The strength of the transparent gel of 1-butylpyridinium tetrafluoroborate ([C(4)py]BF(4)), prepared at a concentration of 60 g L(-1) (gelator 1/[C(4)py]BF(4)), was ca. 1500 g cm(-2). FT-IR spectroscopy indicated that a driving force for gelation was intermolecular hydrogen bonding between amides and that the phase transition from gel to liquid upon heating was brought about by the collapse of hydrogen bonding. The gels formed from ionic liquids were very thermally stable; no melting occurs up to 140 degrees C when the gels were prepared at a concentration of 70 g L(-1) (gelator/ionic liquid). The ionic conductivities of the gels were nearly the same as those of pure ionic liquids. The gelator had electrochemical stability and a wide electrochemical window. When the gels were prepared from ionic liquids containing propylene carbonate, the ionic conductivities of the resulting gels increased to levels rather higher than those of pure ionic liquids. The gelators also gelled ionic liquids containing supporting electrolytes.     

Versatile heat resistant solid electrolytes with performances of liquid electrolytes

The confinement of ionic liquids (room temperature molten salts) within a porous silica matrix was performed by a one-step non-hydrolytic sol–gel route, leading to hybrid materials featuring both the mechanic and transparency properties of silica gels and the high ionic conductivity of ionic liquids, as well as a thermal stability up to around 550 K. Butylmethylimidazolium [BMI] or butylpyridinium [BPy] as cations with bis(trifluorosulfonyl)imide [TFSI] or tetrafluoroborate [BF₄] as anions along with a silica matrix showed similar properties.     

Highly Efficient and Stable Palladium Nanoparticles Supported on an Ionic Liquid Silica Sol?Gel Modified Electrode

A carbon ionic liquid electrode modified with a thin layer of silica sol? gel containing phosphinite ionic liquid was prepared for deposition of palladium nanoparticles. Palladium nanoparticles were formed easily by simple contact of the modified electrode with palladium chloride solution. The novel material overcomes the shortcomings of conventionally modified electrodes with a thin layer of silica sol? gel, due to the existence of ionic liquid in silica matrix. A crack‐free sol? gel matrix was obtained and also, the uniform porous structure of the ionic liquid‐sol? gel matrix resulted in a fast mass transport and increased ionic conductivity. The electrode exhibits high electrocatalytic effects towards hydrazine and ascorbic acid. It is very stable against repetitive cycling in the applied potential window.     

One-pot synthesis of silica gel confined functional ionic liquids: effective catalysts for deoximation under mild conditions

Several acid-functional ionic liquids were physically confined into the silica gel through a sol-gel process and used as effective catalysts for deoximation reactions, which proceeded under ambient temperatures without addition of any co-catalysts or oxidizing and reducing agents.     

Supported Ionic Liquid Catalysis

Supported ionic liquid catalysis is a concept which combines the advantages of ionic liquids with those of heterogeneous support materials. The viability of this concept has been confirmed by several studies which have successfully confined various ionic phases to the surface of support materials and explored their potential catalytic applications. Although the majority of the evaluated supports were silica based, several studies focused on polymeric materials including membranes. The preparation of these materials was achieved by using two different immobilization approaches. The first approach involves the covalent attachment of ionic liquids to the support surface whereas the second simply deposits the ionic liquid phases containing catalytically active species on the surface of the support. Herein recent advances made in this area are described.     

Supported ionic liquid catalysis

Supported ionic liquid catalysis is a concept which combines the advantages of ionic liquids with those of heterogeneous support materials. The viability of this concept has been confirmed by several studies which have successfully confined various ionic phases to the surface of support materials and explored their potential catalytic applications. Although the majority of the evaluated supports were silica based, several studies focused on polymeric materials including membranes. The preparation of these materials was achieved by using two different immobilization approaches. The first approach involves the covalent attachment of ionic liquids to the support surface whereas the second simply deposits the ionic liquid phases containing catalytically active species on the surface of the support. Herein recent advances made in this area are described.     

The preparation of sol-gel materials doped with ionic liquids and trialkyl phosphine oxides for yttrium(III) uptake

A new material (IL923SGs) composed of ionic liquids and trialkyl phosphine oxides (Cyanex 923) for Y(III) uptake was prepared via a sol-gel method. The hydrophobic ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate (C₈mim⁺PF₆⁻) was used as solvent medium and pore templating material. The extraction of Y(III) by IL923SGs was mainly due to the complexation of metal ions with Cyanex 923 doped in the solid silica. Ionic liquid was stably doped into the silica gel matrix providing a diffusion medium for Cyanex 923, and this will result in higher removal efficiencies and excellent stability for metal ions separation. IL923SGs were also easily regenerated and reused in the subsequent removal of Y(III) in four cycles.     

Supported absorption of CO2 by tetrabutylphosphonium amino acid ionic liquids

A new type of "task specific ionic liquid", tetrabutylphosphonium amino acid [P(C4)4][AA], was synthesized by the reaction of tetrabutylphosphonium hydroxide [P(C4)4][OH] with amino acids, including glycine, L-alanine, L-beta-alanine, L-serine, and L-lysine. The liquids produced were characterized by NMR, IR spectroscopies, and elemental analysis, and their thermal decomposition temperature, glass transition temperature, electrical conductivity, density, and viscosity were recorded in detail. The [P(C4)4][AA] supported on porous silica gel effected fast and reversible CO2 absorption when compared with bubbling CO2 into the bulk of the ionic liquid. No changes in absorption capacity and kinetics were found after four cycles of absorption/desorption. The CO2 absorption capacity at equilibrium was 50 mol % of the ionic liquids. In the presence of water (1 wt %), the ionic liquids could absorb equimolar amounts of CO2. The CO2 absorption mechanisms of the ionic liquids with and without water were different.     

Ionization condition of lithium ionic liquid electrolytes under the solvation effect of liquid and solid solvents

Ionization condition and ionic structures of the lithium ionic liquid electrolytes, LiTFSI/EMI-TFSI/(PEG or silica), were investigated through the measurements of ionic conductivity and diffusion coefficient. The size of the hydrodynamic lithium species (rLi) evaluated from the Stokes-Einstein equation was 0.90 nm before gelation with the PEG or silica. This reveals that the TFSI- anions from the solvent are coordinated on Li+ for solvation, forming, for example, Li(TFSI)4(3-) and Li(TFSI)2- in the electrolyte solution. By the dispersion of PEG for gelation, rLi increased up to 1.8 nm with the 10 wt % of PEG. This indicates that the lithium species is directly interacted with the oxygen sites on the polymer chains and the lithium species migrate, reflecting the polymer by hopping from site to site. In case of the silica dispersion, rLi decreased to 0.7 nm at 10 wt % silica. Although the silica surface with silanol groups fundamentally attracts Li+, the lithium does not migrate from site to site on the silica surface as in the gel of the polymer and follows random walk behavior in the network of the liquid-phase pathways in the two-phase gel. In the process, that solvated TFSI- anions are partially removed may be due to the attractive effect of H+, which was dissociated from the silanol group. It is concluded that the dispersed silica is effective to modify the hydrodynamic lithium species to be appropriate for charge transport as reducing the size and anionic charge of Li(TFSI)4(3-) by removing one or two TFSI- anions.     

Multiscale dynamics of 1H and 19F in confined ionogels for lithium batteries

We present the first results of the nuclear magnetic relaxation dispersion (NMRD) of the confined proton-bearing cation (BMI) and fluorine-bearing anion (TFSI) pair of ionic liquids (Li⁺-ionogels) confined within a silica-like mesoporous matrices designed for lithium batteries. These results are in favour of a very-correlated dynamical motion of the anion–cation pair within the solid and disordered silica matrix.     

Carbon nanotubes incorporated within lyotropic hexagonal liquid crystal formed in room-temperature ionic liquids

Multiwalled carbon nanotubes (MWCNTs) were evenly dispersed within hexagonal lyotropic liquid crystals (LLCs) formed in room-temperature ionic liquids (RTILs), ethylammonium nitrate (EAN). Characterization and tribological properties of dispersed system were studied in detail. Polarized optical microscopy images combined with small-angle X-ray scattering (SAXS) results indicate that the MWCNTs are well-dispersed and that the introduction of MWCNTs does not destroy the structure of hexagonal LLCs. The increase of d spacing demonstrates the integration of MWCNTs within the cylinders of the hexagonal LLCs. FT-IR and Raman spectra of the MWCNTs-LLC composites show the characteristic absorption peaks and Raman bands of MWCNTs. The tribological properties were explored to greatly extend the applications of MWCNTs-LLC composites in RTILs as lubricating materials. The rheological measurement results indicate that MWCNTs-LLC composites are highly viscoelastic and that the apparent viscosity is enhanced by the presence of the MWCNTs.     

Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids

The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.     

Synthesis and thermophysical properties of two new protic long-chain ionic liquids with the oleate anion

This work reports the synthesis of 2-hydroxy ethylammonium oleate and bis(2-hydroxy ethyl)ammonium oleate ionic liquids, which have a long aliphatic chain as well as the study of some of their physical properties, in particular the effect of temperature on their density, speed of sound, viscosity, and refractive index. ¹H and ¹³C NMR spectra were used to characterize the chemical structure of the species in concordance with FT-IR spectra. DOSY NMR spectra were used to determine the self-diffusion coefficients of 2-hydroxy ethylammonium oleate ionic liquid, which were consistent with the formation of a lamellar or micellar liquid crystal phase; due the similar structure, a similar aggregation in the bis(2-hydroxy ethyl)ammonium oleate ionic liquid it is expected.