Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Conversion ofn-hexane over Pt?Sn/γ-Al2O3 catalyst

Conversion ofn-hexane has been applied as a test reaction to study differences between the series of Pt−Sn/γ-Al₂O₃ catalysts obtainedvia different methods of preparation. Preliminary results of catalytic experiments have been compared with some changes occurring on the catalysts surfaces as the results of the preparation technique applied. It has been found that catalysts with the second metal (Sn) introduced to the support by the coprecipitation technique were much more stable in comparison to the catalysts where the tin component has been added by the impregnation method, however, we have not observed large differences in catalytic activity.     

Activities of δ-Al2O3-supported bimetallic Pt?NiO and Co?NiO catalysts for methane autoreforming: Oxidation studies

The methane oxidation activities of Pt−NiO and Co−NiO bimetallic catalysts have been investigated as part of a larger research program on the autothermal reforming of methane (combined methane oxidation and steam reforming) in a fluidized bed reactor. Experiments at atmospheric pressure and 783–1023 K for both catalysts showed that the reaction was more selective towards H₂ production at CH₄∶O₂ ratios greater than unity. Light-off temperature increased with decreasing CH₄∶O₂ ratios, but increase in gas velocity (beyond minimum fluidization) increased the light-off temperature. Co−NiO was as promising as the more expensive Pt−NiO catalyst for the oxidation.     

Lithium promoted Pt?Sn/Al2O3 catalysts for dehydrogenation ofn-decane: Influence of lithium metal precursors

Four lithium metal precursors (LiNO₃, CH₃COOLi, LiOH, LiCl) have been used as promoters in Pt–Sn/Al₂O₃ catalysts to improve activity, selectivity and stability in a modeln-decane dehydrogenation reaction. Acidity, TPR and TPCO measurements have shown that the precursors affect the acid site distribution in the support, modify the reducibility and dispersity of Pt–Sn active species, coke lay-over patterns, stability and also selectivity for formation of monoolefins in the dehydrogenation ofn-decane.     

Enhancement of Pt?Sn/Al2O3 catalyst stability for butane dehydrogenation by modification with Sm and Li

Stabilization methods of Pt–Sn/Al₂O₃ dehydrogenation catalysts by modification with Sm and Li are introduced. Pt crystallite dispersion on the support can be promoted by Sm. Li, especially when corporated with Sm, very effectively inhibits carbonization and prolongs the life of the catalysts.     

Effect of thermal treatment on phase composition and ethanol oxidation activity of a carbon supported Pt50Sn50 alloy catalyst

A carbon supported Pt–Sn electrocatalyst in the Pt/Sn atomic ratio 50:50 was prepared by the reduction of Pt and Sn precursors with formic acid and thermally treated at 200 °C (i.e., in the presence of solid tin) and 500 °C (in the presence of molten tin) in flowing hydrogen. In the absence of thermal treatment, X-ray diffraction (XRD) analysis showed a solid solution of Sn in the face centered cubic (fcc) Pt and SnO₂. After thermal treatment, the formation of a main phase of hexagonal PtSn (niggliite) and a secondary phase of cubic Pt₃Sn was observed in the Pt50Sn50 catalyst. The relative amount of the PtSn phase increased with increasing thermal treatment temperature. The presence of molten tin gave rise to the formation of some big particles during annealing at 500 °C. The activity for the ethanol oxidation reaction (EOR) of the as-prepared catalyst was higher than that of both thermally treated catalysts and Pt75Sn25/C and Pt50Ru50/C by E-TEK. The higher activity for the EOR of the as-prepared Pt–Sn catalysts was ascribed to the presence of a large amount of SnO₂. Dedicated to Teresa Iwasita’s 65th birthday.     

Effect of tetrabutyltin on the acidity and reducibility of platinum-tin alumina supported sol-gel catalysts

Tin precursor effect in Pt−Sn/Al₂O₃ sol-gel catalysts has been studied. It is shown that catalysts prepared with tetrabutyltin allow a better reduction of platinum than catalysts prepared with tin tetrachloride and with tin tetra-tert-amyloxide. The solids prepared with tetrabutyltin are catalysts showing a high activity in isopropanol decomposition and cyclohexane dehydrogenation.     

Pt/SO42??ZrO2: The state of platinum and its relation with catalytic activity inn-hexane isomerization

Pt/SO₄ ²⁻−ZrO₂ calcined at 873 K shows the same catalytic activity forn-hexane isomerization as the calcined and reduced sample. A platinum reduction peak did not appear in the TPR profile and the presence of Pt⁰ was detected by XPS on the only calcined Pt/SO₄ ²⁻−ZrO₂. Nevertheless, this calcined material does not show hydrogen chemisorption and cyclohexane dehydrogenation activity.     

The state of metals in the supported bimetallic Pt−Pd/SO4/ZrO2 system

The behavior of the metals in the Pt−Pd/ZrO₂ and Pt−Pd/SO₄/ZrO₂ systems was studied by DRIFT spectroscopy. After reduction of Pt−Pd/ZrO₂ at 100 °C, the states of the metals are mainly Pt⁰ and Pd⁰ with a minor admixture of positively charged forms of Pt⁺ or Pd²⁺. An increase in the temperature of reduction leads to the formation of a bimetallic alloy. In the Pt−Pd/SO₄/ZrO₂ system, the effects of alloy formation and the interaction of the surface SO₄ groups superimpose. At low reduction temperatures, the surface SO₄ groups interact mainly with palladium. The influence of the surface sites on both supported metals increases with increasing reduction temperature. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1265–1270, July, 1999.     

Platinum–tin complexes as catalysts for the anodic oxidation of borohydride

Platinum–tin complexes were prepared by the reduction of Pt(IV) with Sn(II) in HCl media and studied by light absorption spectrometry, X-ray photoelectron spectroscopy (XPS), and electron microscopy. The formation of three complexes, H₃[Pt(SnCl₃)₅], H₂[Pt(SnCl₃)₂Cl₂], and H₂[Pt₃(SnCl₃)₈], depending on HCl and SnCl₂ concentrations, has been shown. The glassy carbon (GC) electrode modified in the complexes solutions was found to be an electrocatalyst for borohydride oxidation in a 1.0-M NaOH solution. Comparison of BH₄ ⁻ electrooxidation on Pt and on GC modified with platinum–tin complexes has shown that catalytic hydrolysis of BH₄ ⁻ did not proceed in the latter case in contrast to its oxidation on the Pt electrode, and only direct BH₄ ⁻ oxidation has been observed in the positive potentials scan. The activity of Pt–Sn complexes for BH₄ ⁻ oxidation changes with time and eventually decreases due to Sn(II), bound in the complex with Pt(II), oxidation by atmospheric oxygen. The complexes may be renewed by addition of missing amounts of SnCl₂ and HCl.     

Nucleophilic Substitution Reactions at Planar Tetra-coordinate Bis-cationic-platinum(II) Complexes. Kinetics of Displacement of Pyridine from {Pt[2,6-bis(methylthiomethyl)pyridine](py)}2+, {Pt[bis(2-pyridylmethyl)amine] (py)}2+ and {Pt[bis(2-(pyridylmethyl)sulphide](py)}2+ Cations

The kinetics of nucleophilic substitution of pyridine in bis-cationic [Pt(L)(py)]²⁺ complexes (L=SNS, NNN, NSN) [SNS=bis(methylthiomethyl)pyridine, NNN=bis(2-pyridylmethyl)amine, NSN=bis(2-pyridylmethyl)sulphide] by a series of nucleophiles (Cl⁻, Br⁻, I⁻, N₃⁻, (C₂H₅)₂S, NH₃, thiourea (tu), NO₂⁻, C₅H¹0NH, SeCN⁻, SCN⁻, CN⁻ when L=SNS; Cl⁻, Br⁻, I⁻, N₃⁻, (C₂H₅)₂S, SCN⁻, NH₃, NO₂⁻ when L=NNN; Br⁻, N₃⁻, NO₂⁻, NH₃, C₅H₁₀NH when L=NSN) have been measured in MeOH at 25 °C, μ =0.1 mol dm⁻³ (LiClO₄ or LiCF₃SO₃). The logarithms of the second-order rate constants calculated at μ=0, log k° ₂, do not follow the dependence upon the n° _Pt scale. In particular, the reactivity of the biphilic reagents tu, SeCN⁻, SCN⁻ and, to a lesser extent, NO⁻ ₂, towards these doubly charged substrates is largely lower than expected on the basis of the n° _Ptscale. There are good linear relationships between logk° ₂ for the bis-cationic substrate [Pt(SNS)(py)]²⁺, chosen as the standard, and log k° ₂ for the same reactions with [Pt(NNN)(py)]²⁺, [Pt(NSN)(py)]²⁺ and other double charged complexes previously studied. A new wide nucleophilicity scale based on [Pt(SNS)(py)]²⁺, that is appropriate to all the bis-cationic substrates, is here proposed     

Theoretical study of the structure and stability of the Na2Cl+, NaCl 2? , Na3Cl 2+ , and Na2Cl 3? ions

The geometrical parameters, normal vibration frequencies, and thermochemical characteristics of the Na₂Cl⁺, NaCl ₂ ⁻ , Na₃Cl ₂ ⁺ , and Na₂Cl ₃ ⁻ ions in saturated vapors over sodium chloride were calculated by the ab initio methods including electron correlation. According to calculations, the Na₂Cl⁺ and NaCl ₂ ⁻ triatomic ions have a linear equilibrium D _∞h configuration. The pentaatomic ions can exist in the form of the D _∞h linear isomer, C _2v planar cyclic isomer, or D _3h bipyramidal isomer. At ∼1000 K the Na₃Cl ₂ ⁺ and Na₂Cl ₃ ⁻ ions exist predominantly in the form of the linear isomers. The energies and enthalpies of the ion-molecule reactions involving the above ions were calculated. The formation enthalpy of the ions Δ_f H ⁰(0 K) was determined: 230 ± 2 kJ/mol (Na₂Cl⁺), −96 ± 4 kJ/mol (Na₂Cl ₃ ⁻ ), −616 ± 2 kJ/mol (NaCl ₂ ⁻ ), and −935 ± 4 kJ/mol (Na₂Cl ₃ ⁻ ). Original Russian Text Copyright ? 2007 by T. P. Pogrebnaya, A. M. Pogrebnoi, and L. S. Kudin __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 6, pp. 1053–1061, November–December, 2007.     

In situ FTIRS studies of the electrocatalytic oxidation of ethanol on Pt alloy electrodes

Ethanol oxidation on Pt–Os and Pt–Ru–Os alloy electrodes was investigated by electrochemical and spectroelectrochemical techniques. Cyclic voltammetry and chronoamperometric results showed that the Pt–Os alloy has the highest current density at lower potentials. Linear CO_ads, acetic acid, acetaldehyde, and CO₂ were identified as reaction intermediates and/or products by single potential alteration infrared reflectance spectroscopy and subtractively normalized interfacial Fourier transform infrared reflectance spectroscopy techniques. The in situ Fourier transform infrared spectroscopy results showed that the electrooxidative adsorption of ethanol was dissociative providing CO_ads at low potentials. Dedicated to our friend Professor Francisco Carlos Nart (in memorium), IQSC-USP, Brazil.     

Electronic structure and reactivity of PO 43? , P2O 74? phosphate and SO 42? , S2O 72? sulfate anions

Group-theoretical analysis and molecular orbital methods were used to obtain (in analytical form) the electronic structure and reactivity of the PO ₄ ³⁻ , SO ₄ ²⁻ and P₂O ₇ ⁴⁻ , S₂O ₇ ²⁻ anions. The reactivity of the anions is dictated by the availability of lone electron pairs on the top quasidegenerate MOs in the form of linear combinations of group orbitals from atomic orbitals (AOs) of peripheral oxygen atoms for PO ₄ ³⁻ , SO ₄ ²⁻ and the central (bridging) atom for P₂O ₇ ⁴⁻ , S₂O ₇ ²⁻ . These electron pairs are responsible for the donor-acceptor interactions during complexation, clustering, and other (addition, substitution, etc.) reactions. Original Russian Text Copyright ? 2005 V. A. Zasukha, A. P. Shpak, V. V. Trachevskii, and E. V. Urubkova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 46, No. 3, pp. 405–415, May–June, 2005.     

Hydroisomerization of benzene-containing gasoline fractions on a Pt/SO 42? -ZrO2-Al2O3 catalyst: II. Effect of chemical composition on acidic and hydrogenating and the occurrence of model isomerization reactions

The acidic and hydrogenating of Pt/SO₄²⁻-ZrO₂-Al₂O₃ samples containing from 18.8 to 67.8 wt % Al₂O₃ as a support constituent were studied by the IR spectroscopy of adsorbed CO and pyridine, and the model reactions of n-heptane and cyclohexane isomerization on these catalysts were examined. The total catalyst activity in the conversion of n-heptane decreased with the concentration of Al₂O₃; this manifested itself in an increase in the temperature of 50% n-heptane conversion from 112 to 266°C and in an increase in the selectivity of isomerization to 94.2%. In this case, the maximum yield of isoheptanes was 47.1 wt %, which was reached on a sample whose support contained 67.8 wt % Al₂O₃. A maximum yield (69.6 wt %) and selectivity (93.7%) for methylcyclopentane formation from cyclohexane were also reached on the above catalyst sample. This can be explained by lower concentrations of Lewis and Br?nsted acid sites in the Pt/SO₄²⁻-ZrO₂-Al₂O₃ system, as compared with those in Pt/SO₄²⁻-ZrO₂. The experimental results allowed us to make a preliminary conclusion that the Pt/SO₄²⁻-ZrO₂-Al₂O₃ catalyst whose support contains 67.8 wt % Al₂O₃ is promising for use in the selective hydroisomerization of benzene-containing gasoline fractions in the thermodynamically favorable process temperature range of 250–300°C.     

Syntheses, Crystal Structures and Third-order Nonlinear Optical Properties of Coordination Polymers {[Et4N][Ag2I3]}n and [CuBr(C10H8N2S2)]n

Coordination polymers {[Et₄N][Ag₂I₃]}_n (1) and [CuBr(C₁₀H₈N₂S₂)]_n (2) were prepared by standard Schlenk techniques. Their X-ray measurements indicate that polymer (1) crystallizes in the orthorhombic space group Pnma, and polymer (2) crystallizes in the monoclinic space group P21/n. Complex (1) has a hanging ladder-like polymeric chain which can also be described as a helical chain bridged by Ag–Ag edges. Complex (2) exhibits a monoclinic crystal system with a slightly distorted tetrahedron. The nonlinear optical (NLO) properties of (1) and (2) were investigated by using Z-scan techniques with an 8 ns pulsed laser at 532 nm. These two coordination polymers exhibit NLO absorption and an effective self-focusing effect. The effective α₂ and n₂ values of cluster (1) are 3.04×10⁻¹¹ m W⁻¹ and 7.6×10⁻¹⁸ m² w⁻¹ and the effective α₂ and n₂ values of compound (2) are 1.08×10⁻¹¹ m W⁻¹ and 3.1×10⁻¹⁸ m² w⁻¹ when measured in CH₂Cl₂ solution.     

Pt/Al2O3 and Pt/Ba?Al2O3 catalysts studied by temperature programmed desorption of oxygen: Evidence for a low temperature desorbing species

For fresh and aged Pt/Al₂O₃ catalysts, TPD of oxygen is fairly well related to the noble metal surface areas and to the catalytic activity in butane combustion, whereas for aged Pt/Ba−Al₂O₃ solids, the catalytic activity is still preserved despite a tremendous sintering of the metallic phase and seems to be connected to a surface barium superoxide.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Trimeric, Cyclic Dimethyltin-Containing Tungstophosphate [{(Sn(CH3)2)(Sn(CH3)2O)( A- PW9O34)}3]21?

The trimeric, cyclic dimethyltin-containing tungstophophate [{(Sn(CH₃)₂)(Sn(CH₃)₂O)(A-PW₉O₃₄)}₃]²¹⁻ (1) has been synthesized in aqueous acidic medium and characterized by IR, elemental analysis, electrochemistry, and FT-ICR MS. Single-crystal X-ray analysis was carried out on Cs₁₂Na₉[{(Sn(CH₃)₂)(Sn(CH₃)₂O)(A-PW₉O₃₄)}₃]·20H₂O (1a), which crystallizes in the trigonal system, space group R3, with a = b = 29.7445(7) ?, c = 15.5915(7) ? and Z = 3. Polyanion 1 is composed of three trilacunary (A-PW₉O₃₄) Keggin fragments that are linked on one side via three isolated dimethyltin groups and on the other side by a (Sn₃(CH₃)₆O₃) unit and three cesium ions, resulting in a cyclic assembly with C _3v symmetry. The discrete molecular, hybrid organic–inorganic 1 was synthesized by reaction of (CH₃)₂SnCl₂ with Na₉[A-PW₉O₃₄] in 0.5 M sodium acetate buffer (pH 4.8). Comparison of several characteristics of the cyclic voltammograms of 1 and (A-PW₉O₃₄)⁹⁻, including the potential location of their reduction peaks, the difference in their current intensities and their qualitative relative electron transfer speeds, supports the conclusion that the solid-state structure of 1 is retained in solution. The presence of (PW₉O₃₄)-based species in solutions of 1 was also confirmed by FT-ICR mass spectrometry. Dedicated to Professor Günter Schmid on the occasion of his 70th birthday.     

Physicochemical properties of the surface of the (Y,La0.1)Ce x Zr1? x O2?δ( x = 0.1–0.7) and Y0.1Pr0.3Zr0.6O2?δ complex oxide systems

The physicochemical properties of the surface of the Y_0.1Ce _x Zr_1−x O_2−δ, La_0.1Ce _x Zr_1−x O_2−δ (x=0.1–0.7), and Y_0.1Pr_0.3Zr_0.6O_2−δ. complex oxide systems were studied using IR and X-ray photoelectron spectroscopies. An appreciable enrichment of the surface of the solids in rare-earth-metal cations (cerium or praseodymium) during the synthesis was revealed. While cations are uniformly spread over the surface of cerium-zirconium solid solutions, the Y_0.1Pr_0.3Zr_0.6O_2−δ surface is covered by the clusters or even a phase of praseodymia. Reductive treatment in hydrogen with subsequent reoxidation results in the segregation of cerium ions on the Y_0.1Ce_0.3Zr_0.6O_2−δ surface at a temperature as low as 770 K. Original Russian Text ? A.N. Kharlanov, L.N. Ikryannikova, V.V. Lunin, A. Yu. Stakheev, 2007, published in Zhurnal Fizicheskoi Khimii, 2007, Vol. 81, No. 7, pp. 1271–1277.