Half-zirconocene anilide complexes: synthesis, characterization and catalytic properties for ethylene polymerization and copolymerization with 1-hexene

A number of half-zirconocene anilide complexes of the type Cp*ZrCl(2)[N(2,6-R(1)(2)C(6)H(3))R(2)] [R(1) = (i)Pr (1, 3), Me (2); R(2) = Me (1, 2), Bn (3)] and Cp*ZrCl[N(2,6-Me(2)C(6)H(3))Me](2) (4) (Cp* = pentamethylcyclopentadienyl) were synthesized from the reactions of Cp*ZrCl(3) with the lithium salts of the corresponding anilide in diethyl ether at room temperature. All new zirconium complexes were characterized by (1)H and (13)C NMR and elemental analysis. Molecular structures of complexes 1, 2 and 4 were determined by single crystal X-ray diffraction analysis. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 exhibit good catalytic activity for ethylene polymerization, and produce polyethylene with a moderate molecular weight. Among these zirconium complexes, complex 1 shows the highest catalytic activity while complex 4 shows the lowest catalytic activity for ethylene polymerization. Complexes 1-3 also exhibit moderate catalytic activity for copolymerization of ethylene with 1-hexene, and produce copolymers with relatively high molecular weight and reasonable 1-hexene incorporation. In addition, the activation procedure of these catalyst systems were studied by (1)H NMR spectroscopy.     

Synthesis and group 4 complexes of tris(pyrrolyl-alpha-methyl)amine

The tetradentate, trianionic ligand tris(pyrrolyl-alpha-methyl)amine (H(3)tpa) is available in 84% yield in a single step by a triple Mannich reaction involving 3 equiv of pyrrole, 3 equiv of formaldehyde, and ammonium chloride. The new ligand is readily placed on titanium by transamination on Ti(NMe(2))(4), which generates Ti(NMe(2))(tpa) (1) in 73% yield. Treating 1 with 1 equiv of 1,3-dimethyl-2-iminoimidazolidine (H-imd) in toluene provided a rare example of a titanium 2-iminoimidazolidinide, which displays some interesting structural features. Of note is the Ti-N(imd) distance of 1.768(2) A, a typical Ti-N double to triple bond distance. Reaction of Zr(NMe(2))(4) with H(3)tpa gave a complex of variable composition, probably varying in the amount of labile dimethylamine retained. However, stable discreet compounds were available by addition of THF, pyridine, or 4,4'-di-tert-butyl-2,2'-bipyridine (Bu(t)bpy) to in situ generated Zr(NMe(2))(NHMe(2))(x)(tpa). Three chloro zirconium complexes were generated using three different strategies. Treating Zr(tpa)(NMe(2))(Bu(t)bpy) (5) with ClSiMe(3) afforded Zr(tpa)(Cl)(Bu(t)bpy) (6) in 92% yield. Reaction of Li(3)tpa with ZrCl(4)(THF)(2) in THF gave a 72% yield of ZrCl(tpa)(THF)(2) (7). In addition, treatment of ZrCl(NMe(2))(3) with H(3)tpa cleanly generated ZrCl(NHMe(2))(2)(tpa) (8) in 95% yield. An organometallic zirconium complex was generated on treatment of 6 with LiCtbd1;CPh; alkynyl Zr(Ctbd1;CPh)(tpa)(Bu(t)bpy) (9) was isolated in 62% yield. 1, Ti(imd)(tpa) (2), 6, and 9 were characterized by X-ray diffraction.     

Tuning the redox potentials of dinuclear tungsten oxo complexes [(Cp*W(4,4'-R,R-2,2'-bpy)(mu-O))2][PF6]2 toward photochemical water splitting

A series of novel dinuclear tungsten(IV) oxo complexes with disubstituted 4,4'-R,R-2,2'-bipyridyl (R(2)bpy) ligands of the type [(Cp*W(R(2)bpy)(mu-O))(2)][PF(6)](2) (R=NMe(2), tBu, Me, H, Cl) was prepared by hydrolysis of the tungsten(IV) trichloro complexes [Cp*W(R(2)bpy)Cl(3)]. Cyclic voltammetry measurements for the tungsten(IV) oxo compounds provided evidence for one reversible oxidation and two reversible reductions leading to the oxidation states W(V)W(IV), W(IV)W(III) and W(III)W(III). The corresponding complexes [(Cp*W(R(2)bpy)(mu-O))(2)](n+) [PF(6)](n) (n=0 for R=Me, tBu, and 1, 3 for both R=Me) could be isolated after chemical oxidation/reduction of the tungsten(IV) oxo complexes. The crystal structures of the complexes [(Cp*W(R(2)bpy)(mu-O))(2)][BPh(4)](2) (R=NMe(2), tBu) and [(Cp*W(Me(2)bpy)(mu-O))(2)](n+)[PF(6)](n) (n=0, 1, 2, 3) show a cis geometry with a puckered W(2)O(2) four-membered ring for all compounds except [(Cp*W(Me(2)bpy)(mu-O))(2)] which displays a trans geometry with a planar W(2)O(2) ring. Examining the interaction of these novel tungsten oxo complexes with protons, we were able to show that the W(IV)W(IV) complexes [(Cp*W(R(2)bpy)(mu-O))(2)][PF(6) (-)](2) (R=NMe(2), tBu) undergo reversible protonation, while the W(III)W(III) complexes [(Cp*W(R(2)bpy)(mu-O))(2)] transfer two electrons forming the W(IV)W(IV) complex and molecular hydrogen.     

Azide addition to give a tetra-azazirconacycle complex

Addition of the dilithium salt, ortho-(Me3SiNLi)2C6H4, to ZrCl4 affords a base-free, D2d-symmetric complex Zr(IV)[ortho-(Me3SiN)2C6H4]2 (2), with rigorously planar ortho-phenylenediamine ligands. Lewis acidic 2 readily coordinates donor ligands such as NHEt2 to give the five-coordinate complex, Zr(IV)(NHEt2)[ortho-(Me3SiN)2C6H4]2 (3), which is also accessible by the reaction of Zr(NEt2)4 with 2 equiv of ortho-(Me3SiNH)2C6H4. Aryl azides react with 2 and 3 to give an unusual tetra-azametallacycle complex, 4, via 1,2-addition of a ligand N-Si bond to the organic azide. An X-ray crystal structure of 4 reveals a planar, five-membered metallacycle comprising the zirconium atom, one nitrogen atom of the ortho-(Me3SiN)2C6H4 ligand, and all three nitrogen atoms of the aryl azide.     

Oxygen extrusion from amidate ligands to generate terminal Ta=O units under reducing conditions. How to successfully use amidate ligands in dinitrogen coordination chemistry

A series of mixed Cp* amidate tantalum complexes Cp*Ta(RNC(O)R')X(3) (where R = Me(2)C(6)H(3), (i)Pr, R' = (t)Bu, Ph, X = Cl, Me) have been prepared via salt metathesis and their fundamental reactivities under reducing conditions have been explored. Reaction of the tantalum chloro precursors with potassium graphite under N(2) or Ar leads to the stereoselective formation of the terminal tantalum oxo species, Cp*Ta=O(η(2)-RN=CR')Cl. This represents the formal extrusion of oxygen from the amidate ligand to the reduced tantalum center and is accompanied by the formation of the iminoacyl fragment bound to Ta(v). Amidate dinitrogen complexes, [Cp*TaCl(RNC(O)(t)Bu)](2)(μ-N(2)) (where R = Me(2)C(6)H(3), (i)Pr) were synthesized via salt metathesis from the known [Cp*TaCl(2)](2)(μ-N(2)) precursor, establishing that amidate ligands can support dinitrogen complexes, but not the reduction process often necessary for their synthesis.     

Zirconium complexes incorporated with asymmetrical tridentate pincer type mono- and di-anionic pyrrolyl ligands: mechanism and reactivity as catalytic precursors

The reactions of Zr(NR(2))(4) (1, R = Me; 2, R = Et) with an asymmetrical tridentate pincer type pyrrole ligand precursor [C(4)H(2)NH(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))] and treatment of the derivatives with either PhNCS or PhNCO have been carried out and characterized. Reacting Zr(NR(2))(4) (1, R = Me; 2, R = Et) with [C(4)H(2)NH(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))] generates Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NR(2))(2) (3, R = Me; 4, R = Et) in high yield along with the elimination of 2 equiv of dimethylamine or diethylamine, respectively. Interestingly, while changing the solvent from Et(2)O to CH(2)Cl(2), the complex Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))][C(4)H(2)N(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))]Cl (5) is produced by undergoing C-Cl bond cleavage. Furthermore, reaction of either 3 or 4 with 1 or 2 equiv of PhNCS or PhNCO yields Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NMe(2))[PhNC(NMe(2))S] (6), Zr[C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NMe(2))](NEt(2))[PhNC(NEt(2))O] (7) and Zr[C(4)H(2)N(2-CH(2)NH(t)Bu)(5-CH(2)NMe(2))][PhNC(NEt(2))O](3) (8), respectively. All the aforementioned complexes were characterized by (1)H and (13)C NMR spectrometry and the molecular structures of 5, 6, and 8 have been determined by single-crystal X-ray diffractometry. Complexes 4, 5, and 7 initiated the ethylene polymerization in the presence of MAO as the co-catalyst.     

New diamide-diamine ligands and their zirconium and hafnium dichloride and bis(dimethylamide) complexes

The multigram syntheses of the protio ligands (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHSiMe(2)R)(2) (R = Me, H(2)N(2)NN' 3; R = (t)Bu, H(2)N(2)NN() 4) are described via reactions of the previously reported (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NH(2))(2) (1). A new synthesis of 1 is reported starting from 2-aminomethylpyridine and N-tosylaziridine, proceeding via (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2) (2). Reaction of H(2)N(2)NN' or H(2)N(2)NN* with (n)BuLi gives good yields of the dilithiated derivatives Li(2)N(2)NN' and Li(2)N(2)NN*. Reaction of H(2)N(2)NN' or H(2)N(2)NN* with [MCl(2)(CH(2)SiMe(3))(2)(Et(2)O)(2)] gives the cis-dichloride complexes [MCl(2)(L)] (L = N(2)NN', M = Zr 7 or Hf 8; L = N(2)NN(), M = Zr 9). The corresponding reactions of H(2)N(2)NN' or H(2)N(2)NN* with [Zr(NMe(2))(4)] afford the bis(dimethylamide) derivatives [Zr(NMe(2))(2)(L)] (L = N(2)NN' 10 or N(2)NN* 11). All of these protonolysis reactions proceed smoothly and in good yields. Attempts to prepare the titanium complexes [Ti(X)(2)(N(2)NN')] (X = Cl or NMe(2)) were unsuccessful. The X-ray crystal structures of (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2).EtOH, [ZrCl(2)(N(2)NN')].0.5C(6)H(6), [Zr(NMe(2))(2)(N(2)NN')], and [Zr(NMe(2))(2)(N(2)NN*)] are reported.     

New cyclopentenyl-linked [NPN] ligands and their coordination chemistry with zirconium: synthesis of a dinuclear side-on-bound dinitrogen complex

The synthesis and characterization of two 1,2-cyclopentyl-bridged diiminophosphine proligands, (CY5)[NPN](DMP)H(2) (CY5 = cyclopentylidene; DMP = 2,6-Me(2)C(6)H(3)) and (CY5)[NPN](DIPP)H(2) (DIPP = 2,6-(i)Pr(2)C(6)H(3)), are presented, and tautomerization to the corresponding 1,2-cyclopentenyl-bridged enamineimine phosphine precursors is reported. These two new proligands are obtained by deprotonation of N-DMP- or N-DIPP-cyclopentylideneimine (N-DMP, 2,6-dimethylphenyl; N-DIPP, 2,6-diisopropylphenyl) and the subsequent addition of 0.5 equiv of dichlorophenylphosphine. Each ligand precursor exists as a mixture of isomers that consist of the diimine, enamineimine, and dienamine tautomers and corresponding stereoisomers, each of which could be identified. The bis(dimethylamido)zirconium complexes (CY5)[NPN](DMP)Zr(NMe(2))(2) and (CY5)[NPN](DIPP)Zr(NMe(2))(2) were prepared directly from the neutral proligands and Zr(NMe(2))(4) via protonolysis. Exchange of the dimethylamido ligands in the latter complexes for chlorides and iodides takes place upon reaction with excess Me(3)SiCl and Me(3)SiI, respectively. A dinuclear zirconium-dinitrogen complex, {(CY5)[NPN](DMP)Zr(THF)}(2)(μ-η(2):η(2)-N(2)), was obtained via KC(8) reduction of (CY5)[NPN](DMP)ZrCl(2) under 4 atm of N(2). On the basis of single-crystal X-ray analysis, N(2) has been reduced to a side-on-bound hydrazido (μ-η(2):η(2)-N(2)(4-)) unit. This dinitrogen complex is thermally unstable and decomposes in solution.     

Nitrogen atom insertion into Ir-S and C-S bonds initiated by photolysis of iridium(III)-azido-dithiocarbamato complexes

Photolysis of acetonitrile solutions of Cp*Ir(R2dtc)(N3) [Cp* = eta5-C5Me5, R2dtc = S2CNR2; R = Me (1) or Et (1')] at temperatures below 0 degrees C afford five-coordinate complexes Cp*Ir{NSC(NR2)S} (2 or 2'), where a nitrogen atom has been inserted into one of the Ir-S bonds. In solution, complex 2 thermally convert to the azaethene-1,2-dithiolate complex, Cp*Ir[SN=C(NMe2)S] (3), which could be crystallized as the corresponding dimer, {Cp*Ir[mu-SN=C(NMe2)S-kappa3S:S,S']}2 (4). As a result, a nitrogen atom that originated in the azide ligand is transferred into a C-S bond of the dithiocarbamate.     

Molybdenocene trihydride complexes: influence of a [Me2Si] ansa bridge on classical versus nonclassical nature, stability with respect to elimination of dihydrogen, and acidity

Experimental and computational studies on a series of cationic molybdenocene trihydride complexes, namely [Cp(2)MoH(3)]+, [(Cp(Bu)t)(2)MoH(3)]+, [Cp(2)MoH(3)]+, and ([Me(2)Si(C(5)Me(4))(2)]MoH(3))+, demonstrate that the most stable form for the ansa molybdenocene derivative is a nonclassical dihydrogen-hydride isomer, ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, whereas the stable forms for the non-ansa complexes are classical trihydrides, [Cp(2)Mo(H)(3)]+, [(Cp(Bu)t)(2)Mo(H)(3)]+, and [Cp(2)Mo(H)(3)]+. In addition to altering the classical versus nonclassical nature of [Cp(2)MoH(3)]+ and ([Me(2)Si(C(5)Me(4))(2)]Mo(eta(2)-H(2))(H))+, the [Me(2)Si] ansa bridge also markedly influences the stability of the complex with respect to elimination of H(2) and dissociation of H+. Finally, computational studies on ([H(2)Si(C(5)H(4))(2)]MoH(2)D)+ and ([H(2)Si(C(5)H(4))(2)]MoHD(2))+ establish that deuterium exhibits a greater preference than hydrogen to occupy dihydrogen versus hydride sites.     

Synthesis of zirconium, hafnium, and tantalum complexes with sterically demanding hydrazide ligands

The bulky hydrazine t-BuN(H)NMe2 was synthesized via hydrazone and t-BuN(H)N(H)Me intermediates as the major component in a 90:5:5 mixture consisting of t-BuN(H)NMe2, t-BuN(Me)N(H)Me, and t-BuN(Me)NMe2. Reacting the mixture with n-BuLi followed by distillation and fractional crystallization led to the isolation of the ligand precursor LiN(t-Bu)NMe2. Lithium hydrazides, LiN(R)NMe2, were reacted with metal chlorides to afford the hydrazide complexes M(N(Et)NMe2)4 (M = Zr or Hf), MCl(N(R)NMe2)3 (M = Zr, R = i-Pr or t-Bu; M = Hf, R = t-Bu), and TaCl3(N(i-Pr)NMe2)2. The X-ray crystal structures of [LiN(i-Pr)NMe2]4, [LiN(t-Bu)NMe2.THF]2, ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu), and TaCl3(N(i-Pr)NMe2)2 were determined. The structural analyses revealed that the hydrazide ligands in ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu) and TaCl3(N(i-Pr)NMe2)2 are eta2 coordinated.     

Cationic Ti(IV) and neutral Ti(III) titanocene-phosphinoaryloxide frustrated Lewis pairs: hydrogen activation and catalytic amine-borane dehydrogenation

Titanium-phosphorus frustrated Lewis pairs (FLPs) based on titanocene-phosphinoaryloxide complexes have been synthesised. The cationic titanium(IV) complex [Cp(2)TiOC(6)H(4)P((t)Bu)(2)][B(C(6)F(5))(4)] 2 reacts with hydrogen to yield the reduced titanium(III) complex [Cp(2)TiOC(6)H(4)PH((t)Bu)(2)][B(C(6)F(5))(4)] 5. The titanium(III)-phosphorus FLP [Cp(2)TiOC(6)H(4)P((t)Bu)(2)] 6 has been synthesised either by chemical reduction of [Cp(2)Ti(Cl)OC(6)H(4)P((t)Bu)(2)] 1 with [CoCp*(2)] or by reaction of [Cp(2)Ti{N(SiMe(3))(2)}] with 2-C(6)H(4)(OH){P((t)Bu)(2)}. Both 2 and 6 catalyse the dehydrogenation of Me(2)HN·BH(3).     

Novel micro3-oxo complexes prepared from Cp*Zr(B(3R)3 (R = H, CH3) and B(C6F5)3 in diethyl ether

From the reactions of Cp*ZrCl(3) with 3 equiv. of LiBH(3)R (R = CH(3), Ph), the organotrihydroborate complexes, Cp*Zr(BH(3)CH(3))(3), 1, and Cp*Zr(BH(3)Ph)(3), 2, were isolated. One of the Zr-H-B bonding interactions in 2 could be described as an intermediate case between the bidentate and tridentate modes. Reactions of and Cp*Zr(BH(4))(3), 3, with Lewis acid B(C(6)F(5))(3) in diethyl ether produced the novel 14-electron ionic compounds [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BCH(3))}][HB(C(6)F(5))(3)], 4, and [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BOC(2)H(5))}][HB(C(6)F(5))(3)], 5, respectively. These two unique compounds resulted from a sequential cleavage of Zr-H-B bonds of 1 and 3 and C-O bonds of ether followed by the formation of O-B bonds. The solid state single crystal X-ray analyses revealed that both compounds have similar structures. A micro(3)-oxygen bridges two zirconiums and a boron atom. The latter three atoms are further connected by three micro(2)-bridging ethoxy groups giving rise to three four-membered metallacycles within the structure of each cation.     

Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Imido Complexes Derived from the Reactions of Niobium and Tantalum Pentachlorides with Primary Amines: Relevance to the Chemical Vapor Deposition of Metal Nitride Films

Reactions of niobium and tantalum pentachlorides with tert-butylamine (>/=6 equiv) in benzene afford the dimeric imido complexes [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (90%) and [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (79%). The niobium complex exists as two isomers in solution, while the tantalum complex is composed of three major isomers and at least two minor isomers. Analogous treatments with isopropylamine (>/=7 equiv) give the monomeric complexes NbCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%) and TaCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%). The monomeric complexes are unaffected by treatment with excess isopropylamine, while the dimeric complexes are cleaved to the monomers MCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)(2) upon addition of excess tert-butylamine in chloroform solution. Treatment of niobium and tantalum pentachlorides with 2,6-diisopropylaniline affords insoluble precipitates of [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%) and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%), which react with 4-tert-butylpyridine to afford the soluble complexes [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (45%) and [4-t-C(4)H(9)C(5)H(4)NH](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (44%). Sublimation of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), MCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2), and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[MCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] leads to decomposition to give [MCl(3)(NR)(NH(2)R)](2) as sublimates (32-49%), leaving complexes of the proposed formulation MCl(NR)(2) as nonvolatile residues. By contrast, [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) sublimes without chemical reaction. Analysis of the organic products obtained from thermal decomposition of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) showed isobutylene and tert-butylamine in a 2.2:1 ratio. Mass spectra of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), and [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) showed the presence of dimeric imido complexes, monomeric imido complexes, and nitrido complexes, implying that such species are important gas phase species in CVD processes utilizing these molecular precursors. The crystal structures of [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))], [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2), [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2), and [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) were determined. [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] crystallizes in the space group P2(1)/c with a = 12.448(3) ?, b = 10.363(3) ?, c = 28.228(3) ?, beta = 94.92(1) degrees, V = 3628(5) ?(3), and Z = 4. [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) crystallizes in the space group P2(1)/c with a = 9.586(4) ?, b = 12.385(4) ?, c = 11.695(4) ?, beta = 112.89(2) degrees, V = 1279.0(6) ?(3), and Z = 2. [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.285(3) ?, b = 11.208(3) ?, c = 23.867(6) ?, beta = 97.53 degrees, V = 2727(1) ?(3), and Z = 2. [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.273(1) ?, b = 11.241(2) ?, c = 23.929(7) ?, beta = 97.69(2) degrees, V = 2695(2) ?(3), and Z = 2. These findings are discussed in the context of niobium and tantalum nitride film depositions from molecular precursors.     

A case for asymmetric hydrozirconation

Hydrozirconation of cis-2-butene with Cp*ZrHCl[N(t-Bu)C(Me)N(Et)], generated in situ through hydrogenolysis of Cp*ZrCl(SiMe2Ph)[N(t-Bu)C(Me)N(Et)] (5), proceeds in high yield to produce a 1:2 mixture of the kinetically stable, diastereomeric sec-butyl complexes, 3a and 3b. Hydrozirconation of trans-2-butene under identical conditions provides a 2:1 mixture of 3a and 3b. Isolation of diastereomerically pure 3a was achieved through reaction of Cp*ZrCl2[N(t-Bu)C(Me)N(Et)] (4) with sec-butyllithium to provide a 2:1 ratio of 3a and 3b, followed by fractional crystallization. Crystallographic analysis of 3a establishes the relative configuration of the sec-butyl group with respect to the chiral zirconium center, thereby permitting construction of diastereomeric transition states that explain the origin of high face selectivity in the hydrozirconation of cis-2-butene. Finally, both iodinative zirconium-carbon bond cleavage and insertion of tert-butyl isocyanide into the zirconium-carbon bond of the sec-butyl group of 3a were found to proceed in high yield and with retention of the secondary alkyl structure. Together, these results provide a critical platform upon which efforts directed toward the asymmetric hydrozirconation of alkenes can be based.     

Reversal of polarization in amidophosphines: neutral- and anionic-kappaP coordination vs. anionic-kappaP,N coordination and the formation of nickelaazaphosphiranes

Nickel(ii) chloride reacts with the bis(tert-butylamino)diazadiphosphetidine {Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)} to form trans-[{Bu(t)(H)NP(micro-NBu(t))(2)PN(H)Bu(t)}(2)NiCl(2)]. In solution and the solid-state each heterocyclic ligand coordinates nickel through one phosphorus atom only. For comparison the solid-state structure of the known trans-[NiCl(2)(PEt(3))(2)] was also determined and it was found that the two complexes have almost identical bond parameters about nickel. The nickel-amidophosphine complexes [{Bu(t)OP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], [(PBu(n)(3))ClNi{Bu(t)NP(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))], and [{Me(2)Si(micro-NBu(t))(2)PNBu(t)}NiCl(PBu(n)(3))] were synthesized and X-ray structurally characterized. In these mono- and di-nuclear nickel complexes the nickel ions are coordinated in pseudo square-planar fashions, by one trialkylphosphine ligand, one chloride ligand and one kappaP,N-coordinated amidophosphine moiety from tert-butylamido-substituted heterocycles. Attempts to create nickel complexes chelated in a kappa(2)P fashion by the o-phenylenediamine-tethered mono- and di-anionic 1-{Me(2)Si(micro-NBu(t))(2)PN} 2-{Me(2)Si(micro-NBu(t))(2)PNH}C(6)H(4) and 1,2-{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4), respectively, afforded instead [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)NiCl] and [1,2-{Me(2)Si(micro-NBu(t))(2)PN}{Me(2)Si(micro-NBu(t))(2)PN}C(6)H(4)Ni{PEt(3)}], each complex having kappaP,N and kappaP coordinated amidophosphine ligands.     

Preparation and physical properties of early-late heterobimetallic compounds featuring Ir-M bonds (M = Ti, Zr, Hf)

Treatment of Cp*Ir N(t)Bu (1) with the appropriate metallocene equivalent is an effective route for the preparation of the heterobimetallic complexes Cp*Ir(μ-N(t)Bu)MCp(2) (2-M, M = Ti, Zr, Hf). The electronic structures of the isostructural series of compounds, 2-M, are described with reference to single-crystal X-ray, Raman, UV-vis, and cyclic voltammetry data. Density functional theory (DFT) calculations were used to aid in the interpretation of this experimental work. Treatment of the zirconium or hafnium congeners with 2,6-lutidinium triflate leads to protonation of the Ir-M bond, to afford Cp*Ir(μ-N(t)Bu)(μ-H)MCp(2)OTf (3-M, M = Zr, Hf). Compound 3-Zr was characterized by single-crystal X-ray diffraction and independently prepared by the reaction of 1 and Cp(2)Zr(H)Cl in the presence of Me(3)SiOTf. In reactions analogous to those for 2-Zr, 2-Hf reacts with S(8) and aryl azides to insert an S-atom or aryl azide fragment into the metal-metal bond, yielding Cp*Ir(μ-N(t)Bu)(μ-S)HfCp(2) (6-Hf) and Cp*Ir(μ-N(t)Bu)(N(3)Ph)HfCp(2) (4-Hf), respectively. Heating 4-Hf results in N(2) extrusion to form Cp*Ir(μ-N(t)Bu)(NPh)HfCp(2) (5-Hf). The kinetics of the latter reaction were studied to obtain activation parameters and a Hammett trend; these data are compared to those for the analogous reaction involving Ir-Zr heterobimetallics.     

Imido titanium compounds bearing the 6-dimethylamino-1,4,6-trimethyl-1,4-diazacycloheptane ligand: synthesis, structures, solution dynamics and ethylene polymerisation capability

Reaction of Me(4)DACH (6-dimethylamino-1,4,6-trimethyl-1,4-diazacycloheptane) with Ti(N(t)Bu)Cl(2)(py)(3) or Ti(N(t)Bu)Cl(2)(NHMe(2))(2) gave Ti(N(t)Bu)(Me(4)DACH)Cl(2) (1) which in CD(2)Cl(2) solution exists as a mixture of trans and cis isomers (defined with respect to the imido ligand and the exocyclic NMe(2) donor of Me(4)DACH). Aryl imido analogues of 1 were prepared from Ti(NAr)Cl(2)(NHMe(2))(2) and Me(4)DACH forming Ti(NAr)(Me(4)DACH)Cl(2) (Ar = 2,6-C(6)H(3)Me(2) (2), 2,6-C(6)H(3)(i)Pr(2) (3), 2-C(6)H(4)(t)Bu (4), 2-C(6)H(4)CF(3) (5)) which also exist as isomers in solution. The activation parameters for the interconversion of trans- and cis-3were measured by VT NMR spectroscopy. The solid state structures of trans-1, 3 and and cis-2 have been determined. In the presence of MAO or dried MAO the compounds 1-5 act as moderatley productive ethylene polymerisation catalysts, with a modest productivity gain found on moving from the 1/MAO to 1/dried MAO catalyst system.     

End-group-confined chain walking within a group 4 living polyolefin and well-defined cationic zirconium alkyl complexes for modeling this behavior

Living polymers derived from the polymerization of 1-butene using the cationic zirconium initiator, {Cp*ZrMe[N(Et)C(Me)-N(tBu)]}[B(C6F5)4] (Cp* = eta5-C5Me5) (1), have been shown to undergo end-group-confined chain walking that is competitive with direct beta-hydride elimination and chain release at -10 degrees C. The well-defined complexes, {Cp*Zr(iBu)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2) and {Cp*Zr(2-ethylbutyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (3), were prepared, and each was found to possess a strong beta-hydrogen agostic interaction that is absent in the living polymer. The isotopically single- and double-labeled derivatives, {Cp*Zr(2-d-2-methylpropyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2') and {Cp*Zr(1-13C-2-d-2-methylpropyl)[N(Et)C(Me)N(tBu)]}[B(C6F5)4] (2' '), were also prepared and found to undergo isotopic label scrambling at 0 degrees C. For 2' ', the observation that after scrambling each deuterium label is located on a 13C-labeled carbon atom is consistent with the Busico mechanism for chain-end epimerization rather than the Resconi mechanism. Decomposition of 3 yielded olefinic products also consistent with chain walking prior to beta-hydride elimination and chain release. Finally, the unexpected decrease in stability of the living polymer relative to that of the model complexes reveals the importance of subtle differences in steric and electronic factors in controlling beta-hydride elimination and chain release.