Continuous in situ generation and reaction of phosgene in a microflow system

Continuous in situ generation of phosgene and its use in acid chloride formation in a microflow system were demonstrated. The acid chloride was subsequently coupled with an amine in high yield without severe epimerization.     

A kinetic study of the reaction of substituted benzenethiols with pertechnetate

The kinetics of the reaction of pertechnetate with a series of para-substituted benzenethiols have been studied. The reaction follows simple second order kinetics. The rate of reaction decreases as the substituent becomes more electron-withdrawing. The kinetic data suggest that the reaction involves nucleophilic attack of a benzenethiol molecule on technetium.

---

- . . . , .

     

In situ spectroscopic investigation of heterogeneous catalysts and reaction media at high pressure

In situ characterization of catalysts by means of complementary spectroscopic techniques can be regarded as the first step towards rational catalyst design. Spurred by the growing interest of catalytic reactions in supercritical fluids and by several industrial reactions traditionally performed at high pressure (>10 bar), new demands and challenges are put to in situ spectroscopic characterization of heterogeneous catalytic reactions. In this article, we discuss the development and the use of spectroscopic and related techniques suitable for elucidating such high-pressure reactions. Selected examples from phase behaviour studies with a view cell, investigations with transmission and attenuated total reflection (ATR) infrared spectroscopy as well as X-ray absorption spectroscopy (EXAFS, XANES), are presented to show the strategies, opportunities and limitations of such high pressure in situ studies. Different facets appear to be important to gain insight into catalytic reactions in supercritical fluids: the identification of the phase behaviour of the reaction mixture, the behaviour of the fluid inside the porous catalyst, the processes occurring at the solid-fluid interface, the possible dissolution of active species and, similar as in gas-solid reactions, the establishment of structure-activity relationships.     

Design of a ratiometric fluorescent probe for benzenethiols based on a thiol-sulfoxide reaction

A novel thiol-sulfoxide reaction based ratiometric probe for benzenethiols was synthesized and evaluated. The probe features a chemospecific reduction over a pH range of 1-10 by benzenethiols with a marked emission color change, enabling the highly selective detection and is promising for applications.     

In situ formation of dispersed palladium nanoparticles in microemulsion: efficient reaction system for ligand-free Heck reaction

The ligand-free Heck reaction catalyzed by Pd(OAc)2 performed well in a TX10 oil-in-water microemulsion. TEM proved in situ formation distributed palladium nanoparticles in the microemulsion. The role of TX10 in the reaction system is the palladium nanoparticles reducing agent and stabilizer. The effect of reaction parameters on the Heck reaction conversion were discussed. The results indicated that the aqueous phase concentration, the base concentration, and the temperature played key roles in the conversion of the reaction. Iodobenzene was converted to the corresponding trans-stilbene quantitatively within 90-150 min. Therefore, the heptane/TX 10/butanol/water/propylene glycol microemulsion containing in situ formed palladium nanoparticles was a very efficient catalyst system for the ligand-free Heck reaction.     

Synthesis of photochromic diarylethenes using a microflow system

An effective method for the synthesis of photochromic diarylethenes based on microflow systems has been developed, and the synthesis of unsymmetrical diarylethenes which is difficult to achieve using conventional macro batch systems, has been accomplished.     

Flash pyrolysis of isonitriles,a stereospecific high yield reaction

Nitriles are obtained from isonitriles in almost quantitative yields and with almost complete retention of the stereochemistry by a convenient flash pyrolytic procedure.     

In situ phosphine oxide reduction: a catalytic Appel reaction

Several important reactions in organic chemistry thrive on stoichiometric formation of phosphine oxides from phosphines. To avoid the resulting burden of waste and purification, cyclic phosphine oxides were evaluated for new catalytic reactions based on in situ regeneration. First, the ease of silane-mediated reduction of a range of cyclic phosphine oxides was explored. In addition, the compatibility of silanes with electrophilic halogen donors was determined for application in a catalytic Appel reaction based on in situ reduction of dibenzophosphole oxide. Under optimized conditions, alcohols were effectively converted to bromides or chlorides, thereby showing the relevance of new catalyst development and paving the way for broader application of organophosphorus catalysis by in situ reduction protocols.     

In situ thermal decomposition of starch with constant moisture in a sealed system

This paper reports a DSC study of the thermal decomposition of starch kept at constant moisture content (0-50%) in a sealed system comprising a high-pressure stainless steel pan with a gold-plated copper seal. The advantage of this technique is that it facilitates the detection and study of the processes of thermal decomposition of starch with constant moisture content, which is a common scenario in the processing of thermoplastic starches. It was found that the decomposition temperature decreased with increasing water content, and that the peak in decomposition temperature broadened, which is different to the case observed in open, unsealed systems.     

A copper-free Sonogashira coupling reaction in ionic liquids and its application to a microflow system for efficient catalyst recycling

[reaction: see text] The PdCl2(PPh3)2-catalyzed Sonogashira coupling reaction, in good to high yields, was performed in an ionic liquid ([BMIm][PF6]) in the absence of a copper salt. The use of an ionic liquid allows for the facile separation and recycling of the catalyst. The application of the above reaction in a microflow system in conjunction with an IMM micromixer was also successful.     

In situ formation and reaction of 2-pyridylboronic esters

2-Pyridylboronic esters were generated by cross-coupling 2-bromopyridines with bis(pinacolato)diboron in the presence of a base and palladium catalyst. The boronic esters reacted in situ with unreacted 2-bromopyridines to afford high yields of 2,2′-bipyridines as homocoupled products. Depending upon the reaction conditions, varying amounts of protodeboronated products were also observed. An attempted cross-coupling between two different 2-bromopyridines produced a nearly statistical mixture of homo- and cross-coupled products.     

磷化氢与烯烃反应的原位NMR谱研究

本文应用加压原位(in-situ)核磁共振技术, 在反应温度70-75℃, 压力1.0-2.0MPa, 氘代苯为溶剂, 偶氮二异丁腈(AIBN)为引发剂的条件下探索了磷化氢与丙烯腈, 4-乙烯基吡啶, 烯丙基胺, 丙烯酰胺, 氨基吡啉和N-乙烯基咔唑的自由基加成反应, 结果表明除氨基吡啉之外的其它五种含氮化合物均能与磷化氢发生反应, 从而找到合成含氮有机膦的良好路线。     

In situ measurements of subsurface contaminants with a multi-channel laser-induced fluorescence system.

A new multi-channel laser-induced fluorescence (LIF) probe with novel optical fiber probe geometry has been designed and integrated into a cone penetrometer testing (CPT) system for in situ contamination detection. The system is capable of collecting excitation and emission matrices (EEMs) of subsurface contaminants as a function of depth in seconds. Compared to our previous multi-channel LIF-CPT system, the new system is faster and more compact, with reduced probe size and sampling area. This article describes the first field demonstration of the system at Hanscom Air Force Base, Massachusetts. One contaminated site within the base was characterized through in situ measurements of 26 LIF-CPT pushes. To validate the LIF results, core samples taken at five locations were analyzed by both on-site LIF measurements and by off-site laboratory analyses with EPA methods. The comparison of the LIF and laboratory results is presented, along with the results of the in situ measurements.     

One ligand capable of in situ reaction in a mixed-ligand system with two new different frameworks

The in situ ligand 2,3-pyrazinedicarboxylic acid (2,3-H₂pzdc) mixed with 1,1′-(1,4-butanediyl)bis(benzimidazole) (bbbi) is used to form two coordination polymers ([Cd(2,3-pzdc)(bbbi)] (1) and [Cd₂Cl₃(2-pzc)(bbbi)₂] (2)) under hydrothermal conditions. Complex 1 was obtained in the absence of in situ reaction and 2 was synthesized with 2,3-H₂pzdc in situ generating 2-pyrazinecarboxylate (2-pzc^?). The structural details reveal that 1 has a 3D framework with dia topology, and 2 is a 2D layer structure and develops a 3D supramolecular structure via strong π?π stacking interactions. The ligand effects were compared for the two frameworks. In addition, fluorescence properties and thermal stabilities of 1 and 2 in the solid were studied.     

In situ generation of the silica shell layer--key factor to the simple high yield synthesis of silver nanowires

a-Silica encapsulated silver nanowires (diameter of 25 +/- 5 nm, average length of 10 mum) have been synthesized by reacting (Me3Si)4Si with AgNO3 in nearly quantitative yield. Formation of the a-silica shell layer (1-3 nm) in situ appears to be one of the most important factors in this simple process.     

In situ separation of heterogeneous and homogeneous reaction components in flow experiment

A method is suggested for the determination of the character (homogeneous or heterogeneous) of the material transformation in the investigation of gas-phase reactions under tubular flow conditions. The method provides the estimation of the error in the rate constant of a gas-phase reaction due to the possible parallel occurrence of a heterogeneous process. © 1993 John Wiley & Sons, Inc.     

Trace element determination in seawater by ICP-SFMS coupled with a microflow nebulization/desolvation system

Direct and simultaneous determination of Al, Ag, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sb, U, V and Zn in diluted (1:10 v:v) seawater from the Antarctic Ocean and the Venice Lagoon at the ng mL^–1 and pg mL^–1 level has been performed by using an inductively coupled plasma sector field mass spectrometer (ICP-SFMS). Samples were analysed by using a PFA microflow nebulizer coupled with a desolvation system or a PFA microflow nebulizer coupled with a Teflon spray chamber, respectively. Measurements were carried out at low (LR, m/m=300), medium (MR, m/m=3,000) and high (HR, m/m=7,500) resolutions depending on the studied isotope. To avoid contamination, sample pre-treatment was carried out in a clean laboratory equipped with a Class 100 vertical laminar flow hood. Concentration ranges (minimum–maximum in ng mL^–1) found in the Antarctic seawater samples (in depth profiles) were: Ag 0.0004–0.0018, As 0.69–1.32, Cd 0.031–0.096, Co 0.018–0.065, Cr 0.18–0.46, Cu 0.04–1.58, Fe 0.13–1.63, Mn 0.02–0.12, Mo 5.97–12.46, Pb 0.007–0.074, Sb 0.033–0.088, U 0.5–1.9, V 0.6–2.5 and Zn 0.16–0.80. Concentration ranges (min–max in ng mL^–1) found in the Venice Lagoon water samples (temporal profile from a benthic chamber experiment) were: Al 0.24–0.61, Ag 0.007–0.031, As 1.42–2.27, Cd 0.050–0.182, Co 0.440–1.461, Cr 0.15–0.34, Cu 0.81–2.46, Fe 0.25–1.66, Mn 11.6–31.7, Mo 6.50–10.6, Pb 0.047–0.225, Sb 0.240–0.492, U 1.7–3.3, V 1.3–2.8 and Zn 5.20–21.5. The detection limits range between 0.06 pg mL^–1 for Ag and U to 15 pg mL^–1 for Fe. In order to check the accuracy of the analytical procedure, measurements of the trace elements in a certified reference material (coastal Atlantic seawater, CASS-4-NRCC) were compared with the certified values. In addition, the results from the Antarctic and Venice Lagoon samples were compared with those obtained by using different analytical techniques.     

In situ synthesis, photometric and spectroscopic studies of chelating system during the 1,4,7,10,13,16-hexaoxacyclooctadecane charge transfer reaction with different acceptors

Electron donor acceptor complexes (EDA) of the 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) as a rich donor were spectrophotometrically discussed and synthesized in solid form according the interactions with different nine of usual π-acceptors like 2,3,5,6-tetrachlorocyclohexa-2,5-diene-1,4-dione (p-chloranil; p-CHL), tetrachloro-1,2-benzoquinone (o-chloranil; o-CHL), 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), tetracyanoquinodimethane (TCNQ), 2,6-dichloroquinone-4-chloroimide (DCQ), 2,6-dibromoquinone-4-chloroimide (DBQ), 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid; CLA), N-bromosuccinimide (NBS), 2,4,6-trinitrophenol (picric acid; PA). Spectroscopic and physical data such as formation constant (K(CT)), molar extinction coefficient (?(CT)), standard free energy (ΔG°), oscillator strength (f), transition dipole moment (μ), resonance energy (R(N)) and ionization potential (I(p)) were estimated in chloroform or methanol at 25°C. Based on the elemental analysis and photometric titrations the CT-complexes were formed indicated the formation of 1:1 charge-transfer complexes for the o-CHL, TCNQ, DCQ, DBQ and NBS acceptors but 1:3 ratio for p-CHL, DDQ, CLA and PA, respectively. The charge-transfer interactions were interpretative according to the formation of dative ion pairs [18C6(?+), A(?-)], where A is acceptor. All of the resulting charge transfer complexes were isolated in amorphous form and the complexes formations on IR and (1)H NMR spectra were discussed.