Naphtho[2,1-b:6,5-b']difuran: a versatile motif available for solution-processed single-crystal organic field-effect transistors with high hole mobility

We here report naphtho[2,1-b:6,5-b']difuran derivatives as new p-type semiconductors that achieve hole mobilities of up to 3.6 cm(2) V(-1) s(-1) along with high I(on)/I(off) ratios in solution-processed single-crystal organic field-effect transistors. These features originate from the dense crystal packing and the resulting large intermolecular π-orbital overlap as well as from the small reorganization energy, all of which originate from the small radius of an oxygen atom.     

Synthesis and properties of a series of well-defined and polydisperse benzo[1,2-b:4,3-b']dithiophene oligomers

Monodisperse and polydisperse oligomers of benzo[1,2-b:4,3-b']dithiophene (BDT) (1-14), including three types of oligomers with different spacers combining BDT units (direct linkage, vinylene spacers, and ethynylene spacers), were synthesized, and their thermal, optical, and electrochemical properties were investigated. The oligomers were synthesized using Suzuki, Stille, Wittig, and Sonogashira coupling reactions. All of the monodisperse oligomers showed high melting points and 5% weight loss temperatures (T(d) > 400 degrees C). The fluorescence maxima of all oligomers were red-shifted, and the emission colors varied from blue to yellow as the chain lengths-and thus the conjugation lengths-increased. The vinylene-bridged oligomers emitted at longer wavelengths than the direct-linked and ethynylene-bridged oligomers. UV-vis absorption spectra in toluene solution indicated an effective conjugation length of about six BDT units for polydisperse oligomer 5. Cyclic voltammetry measurement indicated that tetramer 3 had high electrochemical stability. Although tetramer 3 and vinylene-bridged tetramer 8 exhibited reversible oxidation waves, ethynylene-bridged tetramer 13 showed an irreversible oxidation process. Each type of monodisperse oligomer exhibited higher HOMO levels with increasing chain length.     

Thin film organic transistors from air-stable heteroarenes: anthra[1,2-b:4,3-b':5,6-b':8,7-b']tetrathiophene derivatives

A facile synthesis of air-stable anthra[1,2-b:4,3-b':5,6-b':8,7-b']tetrathiophene derivatives 1a and 1b has been developed for applications in organic thin film transistors. Both molecules tend to self-associate through pi-pi stacking in solution and in different films. The hole mobility of 0.012 cm2 V(-1) s(-1) is obtained from 1a due to morphology changes in films from less ordered to highly ordered structures after thermal annealing. Good performance remained persistent over a period of 14 days, indicating the high stability of such transistors.     

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

Making benzotrithiophene a stronger electron donor

A new member of the benzotrithiophene family, benzo[2,1-b:-3,4-b':5,6-c″]trithiophene (3a), and its alkyl substituted derivatives (3b-e) were synthesized and characterized. Their photophyscial, electrochemical, crystallographic, and self-assembly properties were described. Thin film structures varied widely with the exact nature of the alkyl substitution pattern, with decreasing self-assembly propensity with increasing alkyl chain length. The high HOMO levels and the coplanarity of these molecules show their potential as organic semiconductors and as donor components in donor-acceptor copolymers.     

Organic dyes incorporating the benzo[1,2-b:4,5-b']dithiophene moiety for efficient dye-sensitized solar cells

A new class of organic sensitizers incorporating a benzo[1,2-b:4,5-b']dithiophene (BDT) unit as conjugated spacer has been synthesized and successfully used for dye-sensitized solar cells (DSSCs). The length of the π-conjugated spacers has a strong impact on electro-optical properties of these dyes, leading to the conversion efficiencies ranging from 4.17 to 5.68% under AM 1.5 G irradiation. This result indicates that the BDT unit is a promising candidate in organic sensitizers.     

Derivatives of 4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-4,9-dione: synthesis and properties

A new family of organic semiconducting materials (1-4) integrating the structural components of thiophene and fluorene into a single molecular entity was synthesized and characterized. Optical and electrochemical properties of these previously unknown 4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-4,9-dione derivatives were studied in detail. These materials possess unique optical properties with the longest wavelength absorption maxima around 500-800 nm, which gradually reached a saturation limit with the total number of thiophene units approaching eight. They also display dramatic change in the redox properties with increasing conjugation chain lengths. A thin film of oligomer 3 prepared by a solution-casting method showed a well-ordered solid-state structure according to X-ray diffraction analysis.     

Simplified Liquid-Phase Preparation of Four Decadeoxyribonucleotides and their Preliminary Spectroscopic Characterization

Four self-complementary decadeoxyribonucleotides, dApTpApTpApTpApTpApT, dApTpApTpCpGpApTpApT, dApTpApTpGpCpApTpApT and dApApApApApTpTpTpTpT, were chemically synthesized by the phosphotriester procedure. Efforts were concentrated on keeping the procedure as simple as possible, concomitant with obtaining high-purity products at each step of the process. The decamers were elaborated from the 3'-end, starting with a 3'?O-benzoylated monomer according to the scheme: monomer + monomer → dimer + dimer → tetramer + dimmer → hexamer + tetramer → decamer. Purity of intermediates and of the fully blocked decamers were monitored by chromatography and by 300-MHz ¹H? N M R. spectroscopy. The deblocked decadeoxyribonucleotides were characterized by their UV., CD., and ¹H? NMR. spectra.     

Enhanced Performance of Benzothieno[3,2‐b]thiophene (BTT)‐Based Bottom‐Contact Thin‐Film Transistors

Three new benzothieno[3,2‐b]thiophene ( BTT ; 1 ) derivatives, which were end‐functionalized with phenyl ( BTT‐P ; 2 ), benzothiophenyl ( BTT‐BT ; 3 ), and benzothieno[3,2‐b]thiophenyl groups ( BBTT ; 4 ; dimer of 1 ), were synthesized and characterized in organic thin‐film transistors (OTFTs). A new and improved synthetic method for BTT s was developed, which enabled the efficient realization of new BTT ‐based semiconductors. The crystal structure of BBTT was determined by single‐crystal X‐ray diffraction. Within this family, BBTT , which had the largest conjugation of the BTT derivatives in this study, exhibited the highest p‐channel characteristic, with a carrier mobility as high as 0.22 cm² V^?1 s^?1 and a current on/off ratio of 1×10⁷, as well as good ambient stability for bottom‐contact/bottom‐gate OTFT devices. The device characteristics were correlated with the film morphologies and microstructures of the corresponding compounds.     

Combining chlorination and sulfuration strategies for high-performance all-small-molecule organic solar cells

Three small-molecule donors based on dithieno [2,3-d:2’,3 ’-d’]-benzo[1,2-b:4,5-b’] dithiophene(DTBDT)unit were designed and synthesized by side chain regulation with chlorinated or/and sulfurated substitutions(namely ZR1,ZR1-Cl,and ZR1-S-Cl respectively),along with a crystalline non-fullerene acceptor IDIC-4 Cl with a chlorinated 1,1-dicyanomethylene-3-indanone(IC) end group.Energy levels,molar extinction coefficients and crystallinities of three donor molecules can be effectively altered by combining chlorination and sulfuration strategies.Especially,the ZR1-S-Cl exhibited the best absorption ability,lowest higher occupied molecular orbital(HOMO) energy level and highest crystallinity among three donors,resulting in the corresponding all-small-molecule organic solar cells to produce a high power conversion efficiency(PCE) of 12.05% with IDIC-4 Cl as an acceptor.     

Fluorescent Short-Stranded Helical Foldamers Based on L-shaped Dibenzopyrrolo[1,2-a][1,8]naphthyridine

Helical structures were constructed by using π-spacer-bridged dimers of dibenzopyrrolo[1,2-a][1,8]naphthyridine, which has a highly fluorescent L-shaped π-extended skeleton. Three dimers with biphenylene (dimer 1 ), phenanthrene (dimer 2 ), and m-phenylene (dimer 3 ) spacers, as well as a fixed-helical dimer 4 where two quinolone rings were covalently cross-linked, were designed and prepared. ¹H NMR and ROESY spectra revealed that dimers 1 and 2 adopted helical forms in solution, whereas dimer 3 did not. The helical conformation of 1 was strengthened by addition of either polar or nonpolar solvents to the chloroform solution, which suggested that π–π stacking was the main contributor to the stabilization of the helical structure. All of the dimers, including fixed-helical dimer 4 , emitted fluorescence with high quantum yields (ϕ=0.79–0.86).     

Tetrasubstituted Peropyrenes Formed by Reductive Aromatization: Synthesis,Functionalization and Characterization

The chromophore class of 1,3,8,10-tetrasubstituted peropyrenes was effectively synthesized from peropyrenequinone via a Zn-mediated reductive aromatization approach. In one step, a symmetric functionalization of the peropyrene backbone introducing silylethers ( 2 , 3 ), pivaloyl ( 4 ), triflyl ( 5 ) and also phosphinite ( 6 ) groups was established. Furthermore, the potential of using 4 and 5 in transition metal catalysed cross couplings was explored leading to 1,3,8,10-tetraaryl ( 8 - 11 ) and tetraalkynyl ( 7 ) peropyrenes. The influence of various substituents on the optoelectronic properties of these π-system extended peropyrenes was investigated in solid state by means of X-ray crystallography, in solution by means of UV-Vis and fluorescence spectroscopy and by their redox properties studied via cyclic voltammetry. By comparison with DFT and TD-DFT calculations, it could be elucidated that introduction of a broad variety of substituents in such versatile one or two step procedures leads to peropyrenes with easily tunable HOMO and LUMO energies ranging in a gap window of 0.8 eV. The frontier molecular orbital energies identify the target molecules as promising candidates for hole transporting semiconductors.     

Bowls, balls and sheets of boric acid clusters: the role of pentagon and hexagon motifs

Ab initio calculations suggest the possibility of forming boric acid clusters in the laboratory. The most stable form of the boric acid dimer contains two hydrogen bonds, similar to the carboxylic acid dimers. Though the trimer and the tetramer form extensions of this geometry, the pentamer prefers a bowl shape. Any addition of boric acid molecules to this geometry leads to bowl-shaped structures with the 15-mer forming a (3/4)buckyball and the 20-mer a full-fledged buckyball. The hexamer, on the other hand, prefers to stay planar as a hexagon-centered rosette. Any further extension of this geometry leads to planar structures as long as a pentagon is not included.     

Magnitude and orientation dependence of intermolecular interaction of perfluoropropane dimer studied by high-level ab initio calculations: comparison with propane dimer

Intermolecular interaction energies of 12 orientations of C(3)F(8) dimers were calculated with electron correlation correction by the second-order M?ller-Plesset perturbation method. The antiparallel C(2h) dimer has the largest interaction energy (-1.45 kcal/mol). Electron correlation correction increases the attraction considerably. Electrostatic energy is not large. Dispersion is mainly responsible for the attraction. Orientation dependence of the interaction energy of the C(3)F(8) dimer is substantially smaller than that of the C(3)H(8) dimer. The calculated interaction energy of the C(3)F(8) dimer at the potential minimum is 78% of that of the C(3)H(8) dimer (-1.85 kcal/mol), whereas the interaction energies of the CF(4) and C(2)F(6) dimers are larger than those of the CH(4) and C(2)H(6) dimers. The intermolecular separation in the C(3)F(8) dimer at the potential minimum is substantially larger than that in the C(3)H(8) dimer. The larger intermolecular separation due to the steric repulsion between fluorine atoms is the cause of the smaller interaction energy of the C(3)F(8) dimer at the potential minimum. The calculated intermolecular interaction energy potentials of the C(3)F(8) dimers using an all atom model OPLS-AA (OPLS all atom model) force field and a united atom model force field were compared with the ab initio calculations. Although the two force fields well reproduces the experimental vapor and liquid properties of perfluoroalkenes, the comparison shows that the united atom model underestimates the potential depth and orientation dependence of the interaction energy. The potentials obtained by the OPLS-AA force field are close to those obtained by the ab initio calculations.     

Towards hydroxylated nylon 6: oligomers from a protected 6-amino-6-deoxy- -allonate

The first synthesis of linear oligomers (a dimer, tetramer, hexamer and octamer) of fully hydroxylated analogues of nylon 6 by iterative formation of peptide bonds from a protected 6-amino-6-deoxy- -allonate monomer is reported.     

S K-edge X-ray absorption studies of tetranuclear iron-sulfur clusters: mu-sulfide bonding and its contribution to electron delocalization.

X-ray absorption spectroscopy (XAS) at the sulfur ( approximately 2470 eV) and chlorine ( approximately 2822 eV) K-edges has been applied to a series of 4Fe-4S model complexes. These are compared to 2Fe-2S model complexes to obtain insight into the localized ground state in the mixed-valence dimer versus the delocalized ground state in the mixed-valence tetramer. The preedges of hypothetical delocalized mixed-valence dimers [Fe(2)S(2)](+) are estimated using trends from experimental data and density functional calculations, for comparison to the delocalized mixed-valence tetramer [Fe(4)S(4)](2+). The differences between these two mixed-valence sites are due to the change of the sulfide-bridging mode from micro(2) to micro(3). The terminal chloride and thiolate ligands are used as spectator ligands for the electron density of the iron center. From the intensity of the preedge, the covalency of the terminal ligands is found to increase in the tetramer as compared to the dimer. This is associated with a higher effective nuclear charge on the iron in the tetramer (derived from the energies of the preedge). The micro(3)-bridging sulfide in the tetramer has a reduced covalency per bond (39%) as compared to the micro(2)-bridging sulfide in the dimer (51%). A simple perturbation model is used to derive a quadratic dependence of the superexchange coupling constant J on the covalency of the metal ions with the bridging ligands. This relationship is used to estimate the superexchange contribution in the tetramer (J = -156 cm(-)(1)) as compared to the mixed-valence dimer (J = -360 cm(-)(1)). These results, combined with estimates for the double exchange and the vibronic coupling contributions of the dimer sub-site of the tetramer, lead to a delocalized S(t) = (9)/(2) spin ground state for the mixed-valence dimer in the tetramer. Thus, the decrease in the covalency, hence the superexchange pathway associated with changing the bridging mode of the sulfides from micro(2) to micro(3) on going from the dimer to the tetramer, significantly contributes to the delocalization of the excess electron over the dimer sub-site in the tetramer.     

Lewis acid adducts of narrow band gap conjugated polymers

We report on the interaction of Lewis acids with narrow band gap conjugated copolymers containing donor and acceptor units. Examination of the widely used poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-(diyl-alt-benzo[2,1,3]thiadiazole)-4,7-diyl] (1) shows weaker binding with B(C(6)F(5))(3) when compared with a small molecule that contains a cyclopenta-[2,1-b:3,4-b']dithiophene (CDT) unit flanked by two benzo[2,1,3]thiadiazole (BT) fragments. Studies on model compounds representative of 1, together with a comparison between B(C(6)F(5))(3) and BBr(3), indicate that the propensity for Lewis acid coordination is decreased because of steric encumbrance surrounding the BT nitrogen sites. These observations led to the design of chromophores that incorporate an acceptor unit with a more basic nitrogen site, namely pyridal[2,1,3]thiadiazole (PT). That this strategy leads to a stronger B-N interaction was demonstrated through the examination of the reaction of B(C(6)F(5))(3) with two small molecules bis(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-4,7-pyridal[2,1,3]thiadiazole (8) and bis{2-thienyl-(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)}-4,7-pyridal[2,1,3]thiadiazole (9) and two polymer systems (poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-([1,2,5]thiadiazolo[3,4-c]pyridine)-4,7-diyl] (10) and poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-(4',7'-bis(2-thienyl)-[1,2,5]thiadiazolo[3,4-c]pyridine)-5,5-diyl] (11). From a materials perspective, it is worth pointing out that through the binding of B(C(6)F(5))(3), new NIR-absorbing polymers can be generated with band gaps from 1.31 to 0.89 eV. A combination of studies involving ultraviolet photoemission spectroscopy and density functional theory shows that the narrowing of the band gap upon borane coordination to the pyridal nitrogen on PT is a result of lowering the energies of both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the optically relevant fragments; however, the LUMO is decreased to a greater extent, thereby giving rise to the narrowing of the gap.     

Energetics of model compounds of water oxidizing complex containing quinone cofactors

To reveal reaction mechanism of PS-II, the reaction products of photolysis may be compared with their thermolytic products. According to required molecular assemblies in manganese clusters at WOC of PS-II, we have strategically synthesized dimers (M-1, M-2), trimers (M-3A, M-3B) and tetramer (M-4) using spin carrier imino-phenol functionalized ligands viz. Lawsone Oxime (L-1) and Phthiocol Oxime (L-2) of naturally occurring quinones .These are characterized by elemental analyses, thermogravimetric analyses, differential thermal analyses, powder X-ray diffraction and infrared spectroscopy. Stabilization energies for molecular associations of ligands in various redox and stereoisomeric forms via hydrogen bondings are compared with thermal energies required for their expulsion from the coordination polymers calculated with the help of Coats and Redfern’s relation of rising temperatures. Activation energy required for establishing tetramer (M-4) and dimer (M-2) in coordination sphere by counter ion using same synthetic route is found to be comparable (~37.48±1 kJ mol^-1). Quantitized energies from TG-DTA data for valence tautomers of redox active ligands play significant role in formation of resultant model compound. viz. tetramer, dimer of dimer and trimer. The role of oxo, acetato and spin carrier ligands in model cluster compounds are proposed with respect to their expulsion energies.     

Synthesis of alkoxy-substituted ortho-phenylene ethynylene oligomers

[structure: see text] This Letter describes the first published synthesis and characterization of alkoxy-substituted ortho-phenylene ethynylene (o-PE) oligomers. Sonogashira coupling was used to assemble discrete chain lengths, using a key monomer with orthogonal groups. Deprotection or activation allowed stepwise coupling to produce the dimer, trimer, and tetramer, while convergent coupling of appropriately substituted trimers produced the hexamer. The placement of alkoxy side chains renders these oligomers soluble in common organic solvents permitting solution characterization. Absorption and emission spectra of the trimer, tetramer, and hexamer are provided.     

Polyoxometalates paneling through {Mo2O2S2} coordination: cation-directed conformations and chemistry of a supramolecular hexameric scaffold

The chemical system based on the [Mo(2)O(2)S(2)(OH(2))(6)](2+) aqua cation (noted L) and the trivacant [AsW(9)O(33)](9-) polyoxometalate (noted POM) has been investigated. Depending upon the ionic strength and the nature of the alkali cations, these complementary components assemble to yield three different architectures derived as hexamer (1), tetramer (2), and dimer (3). This series of clusters displays the same stoichiometry {POM(6)L(9)}(36-), {POM(4)L(6)}(24-), and {POM(2)L(3)}(12-) for 1, 2, and 3, respectively, and their conditions of formation differ mainly by the nature and the concentration of the alkali cation (from Li to Cs). Structural characterizations of 1 reveal a large hexameric supramolecular scaffold (about 25 ? in diameter), which encloses a large internal hole (about 200 ?(3)) filled by water molecules and alkali cations (Na(+) or K(+)). The hexameric scaffold 1 exhibits a rare flexibility property evidenced in the solid state by two distinct conformations, either eclipsed (1a) or staggered-off (1b). Both conformations appear clearly separated by a large twist angle (~40°) and depend mainly on the composition of the internal hole. Structure of anion 2 shows a tetrahedral arrangement where the four POM units and the six connecting {Mo(2)O(2)S(2)} linkers are located at the corners and at the edges, respectively. The structure of anion 3 corresponds to the simplest arrangement, described as a dimeric association of two POM units linked by three {Mo(2)S(2)O(2)} pillars. Stability of the hexameric scaffold has been investigated in solution by (183)W and (39)K NMR and by UV-vis, showing that stability of 1 depends strongly on the proportion of potassium ions, which interfere through host-guest exchange. Density functional methodology (DFT) has been applied to compute the geometries and energies of dimer (3), tetramer (2) and hexamer (1) based on {AsW(9)O(33)} (POM) and {Mo(2)O(2)S(2)} (L) units. Calculations tend to show that internal cations act as "glue" to maintain the POM units connected through the conformationally inward-directed {Mo(2)O(2)S(2)} linkers.