N=2 6-dimensional supersymmetric E6 breaking

We study the N=2 supersymmetric E₆ models on the 6-dimensional space–time where the supersymmetry and gauge symmetry can be broken by the discrete symmetry. On the space–time M⁴×S¹/(Z₂×Z₂′)×S¹/(Z₂×Z₂′), for the zero modes, we obtain the 4-dimensional N=1 supersymmetric models with gauge groups SU(3)×SU(2)×SU(2)×U(1)², SU(4)×SU(2)×SU(2)×U(1), and SU(3)×SU(2)×U(1)³ with one extra pair of Higgs doublets from the vector multiplet. In addition, considering that the extra space manifold is the annulus A² and disc D², we list all the constraints on constructing the 4-dimensional N=1 supersymmetric SU(3)×SU(2)×U(1)³ models for the zero modes, and give the simplest model with Z₉ symmetry. We also comment on the extra gauge symmetry breaking and its generalization.     

Oxygen migration in A2B2O7 pyrochlores

Atomic scale computer simulation has been used to predict activation energies for oxygen migration. In total, 54 compounds with the A₂B₂O₇ pyrochlore structure were simulated. In each case, oxygen migration was assumed to proceed via an oxygen vacancy mechanism with oxygen ions hopping between 48f sites. For some compounds the unoccupied 8a interstitial position played an important role in the migration mechanism. The results were analyzed using a contour map of activation energy versus A cation radius along the ordinate and B cation radius along the abscissa. This identified areas of similar cation radii, which exhibit lower activation energy. Results compare favourably with available experimental data.     

Synthesis and characterization of HgBa2Can−1CunO2n+2+δ (n = 1, 2, and 3)

We have successfully prepared the first three members of the mercury-based superconducting compounds Hg--- Ba₂Ca_n−1Cu_nO_2n+2+δ, namely Hg---1201, Hg---1212 and Hg---1223 with high purity and very good quality. T he influence of the synthesis parameters is studied in detail. Using the sealed quartz tube method, very simple procedures are found to ensure a 100% reproducibility of nearly 100% pure Hg---1201 and 85–90% Hg---1212 and Hg---1223. Oxygen annealing of the sample Hg---1201 at 300°C for 18 h results in an enhancement of its critical temperature up to 97 K. The symmetry of the first and second members is tetragonal with lattice parameters a = 3.8831 (1) Å, C = 9.5357 (2) Å, and A = 3.8624 (1) Å, C = 12.7045 (2) Å, respectively. X-ray diffraction lines of Hg---1223 can be indexed in a tetragonal cell with a = 3.8564 (1) Å and C = 15.8564 (9) Å as well as in an orthorhombic cell with lattice parameters a = 5.4537 (1) Å, B = 5.4247 (1) Å, and C = 15.8505 (7) Å.     

Duree de vie et depolarisation par collisions avec l''helium des niveaux 5P3/2 Et 5P1/2 de l''ion Cd

The lifetimes of the Cd⁺ 5²P_3/2 and 5²P_1/2 states have been measured by the Hanle effect. The Cd⁺ ions are produced in a d.c. discharge in cadmium vapor, with helium as buffer gas. The results are: τ(5²P_3/2) = (2.60±0.20) ×10⁻⁹sec, and τ(5²P_1/2) = (3.05 ± 0.13) × 10⁻⁹sec.

We measured also the cross sections for the destruction of the orientation in the 5²P_1/2Cd⁺ state (<5Ų), of the orientation (18±10Ų) and of the alignment (46±10Ų) in the 5²P_3/2 state due to collisions with the helium atoms.     

Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition

Polycrystalline (1−x)Ta₂O₅−xTiO₂ thin films were formed on Si by metalorganic decomposition (MOD) and annealed at various temperatures. As-deposited films were in the amorphous state and were completely transformed to crystalline after annealing above 600 °C. During crystallization, a thin interfacial SiO₂ layer was formed at the (1−x)Ta₂O₅−xTiO₂/Si interface. Thin films with 0.92Ta₂O₅–0.08TiO₂ composition exhibited superior insulating properties. The measured dielectric constant and dissipation factor at 1 MHz were 9 and 0.015, respectively, for films annealed at 900 °C. The interface trap density was 2.5×10¹¹ cm⁻² eV⁻¹, and flatband voltage was −0.38 V. A charge storage density of 22.8 fC/μm² was obtained at an applied electric field of 3 MV/cm. The leakage current density was lower than 4×10⁻⁹ A/cm² up to an applied electric field of 6 MV/cm.     

Investigation on the Cs 6S1/2 to 7D electric quadrupole transition via monochromatic two-photon process at 767 nm

We experimentally demonstrate the cesium electric quadrupole transition from the 6S_1/2 ground state to the 7D_3/2,5/2 excited state through a virtual level by using a single laser at 767 nm. The excited state energy level population is characterized by varying the laser power, the temperature of the vapor, and the polarization combinations of the laser beams. The optimized experimental parameters are obtained for a high resolution transition interval identification. The magnetic dipole coupling constant A and electric quadrupole coupling constant B for the 7D_3/2,5/2 states are precisely determined by using the hyperfine levels intervals. The results, A = 7.39 (0.06) MHz, B = −0.19 (0.18) MHz for the 7D_3/2 state, and A = −1.79 (0.05) MHz, B =1.05 (0.29) MHz for the 7D_5/2 state, are in good agreement with the previous reported results. This work is beneficial for the determination of atomic structure information and parity non-conservation, which paves the way for the field of precision measurements and atomic physics.     

W doping-dependent structural and ferroelectric properties of SrBi2Nb2O9 ferroelectric ceramics

The structural and ferroelectric characteristics of SrBi₂(Nb_1−xW_x)₂O₉ (x=0–0.12) ferroelectric ceramics were investigated. SrBi₂(Nb_1−xW_x)₂O₉ ceramics consisted of a single-phase layered perovskite structure when x was less than 0.06. Uniform microstructure and grain size reduction were observed after the introduction of W. The maximum remanent polarization of 16 μC/cm² appeared at x=0.03, and the coercive field decreased with increasing concentration of W. The ferroelectric behavior of SrBi₂(Nb_1−xW_x)₂O₉ ceramics is interpreted based on the Raman measurement.     

钙钛矿锰氧化物(La_(1-x)Eu_x)_(4/3)Sr_(5/3)Mn_2O_7(x=0,0.15)的磁性和电性研究

通过传统固相反应法制备了钙钛矿锰氧化物(La1-xEux)4/3Sr5/3Mn2O7(x=0,0.15)多晶样品,并且对其磁性和电性进行了研究.磁性测量表明:随着温度的降低,样品经历了一个复杂的转变过程,在温度为T*时经历二维短程铁磁有序转变,在温度为TC时进入三维长程铁磁态.随着Eu的掺杂,T*和TC减小,并且样品(La0.85Eu0.15)4/3Sr5/3Mn2O7在低温区表现出自旋玻璃行为.电性质测量表明:在母体La4/3Sr5/3Mn2O7中La位掺杂Eu后电阻率明显变大,金属绝缘转变温度TMI降低,磁电阻峰值增大.这些影响归因于较小的Eu3+离子替代La3+离子导致平均离子半径减小,晶格发生畸变.此外,较小的Eu3+离子优先占据层间岩盐层的R-site,使La3+,Sr3+,Eu3+离子在(La0.85Eu0.15)4/3Sr5/3Mn2O7中的分布更加有序,所以x=0.15的样品的ρ-T曲线只有一个峰.     

Entropy of planar random surfaces on the lattice

We study planar random surfaces on a hypercubic lattice in two and three dimensions by Monte Carlo techniques. Our data are consistent with the formula n₀(A;C) A^b₀A, where n₀(A;C) is the number of planar random surfaces with area A and boundary C. We find b₀ = −1.4 ± 0.2, = 5.31 ± 0.03 (for d = 2) and b₀ = −1.5 ± 0.2, = 7.13 ± 0.05 (for d = 3). The values of b₀ disagree with those obtained from the Polyakov string model.     

钙钛矿锰氧化物(La1-xGdx)4/3Sr5/3Mn2O7 (x=0, 0.025) 磁性和输运性质研究

采用传统的高温固相烧结法制备了双层钙钛矿锰氧化物(La_1-xGd_x)_4/3Sr_5/3Mn₂ O₇ (x=0, 0.025)多晶样品. 通过X射线衍射仪研究发现样品为Sr₃Ti₂O₇型四方结构, 空间群为I4/mmm; 磁性测量表明, Gd³⁺掺杂后的样品(La_0.975Gd_0.025)_4/3Sr_5/3Mn₂O₇的三维磁有序转变温度(T_C1^3D)、磁化强度(M)均降低, 这是由于Gd³⁺的掺杂引起晶格的畸变, 从而使得晶格常数发生改变, 减弱了铁磁耦合而导致的; 通过电子自旋共振谱测量发现, 在T_C^3D<T<300 K温度范围内, 两样品在顺磁的基体上均有短程的铁磁团簇存在, 出现了相分离现象. 电性测量表明: 两样品分别在T_C1^3D (La_4/3Sr_5/3Mn₂O₇ 样品的三维磁有序转变温度, T_C0^3D)<T<300 K温度范围内均以三维变程跳跃的方式导电, 分析得出Gd³⁺的掺杂使得载流子局域长度的减小. 这表明载流子需要吸收更多的能量才能克服晶格的束缚进行跳跃, 因此(La_0.975Gd_0.025)_4/3Sr_5/3Mn₂ O₇ 样品的电阻较高.     

Enhancing the magnetoelectric coupling of Co4Nb2O9[100] by substituting Mg for Co

We report experimental studies on enhancing the magnetoelectric (ME) coupling of Co₄Nb₂O₉ by substituting the non-magnetic metal Mg for Co. A series of single crystal Co_4−xMg_xNb₂O₉ (x = 0, 1, 2, 3) with a single-phase corundum-type structure are synthesized using the optical floating zone method, and the good quality and crystallographic orientations of the synthesized samples are confirmed by the Laue spots and sharp XRD peaks. Although the Néel temperatures (T_N) of the Mg substituted crystals decrease slightly from 27 K for pure Co₄Nb₂O₉ to 19 K and 11 K for Co₃MgNb₂O₉ and Co₂Mg₂Nb₂O₉, respectively, the ME coupling is doubly enhanced by Mg substitution when x = 1. The ME coefficient α_ME of Co₃MgNb₂O₉ required for the magnetic field (electric field) control of electric polarization (magnetization) is measured to be 12.8 ps/m (13.7 ps/m). These results indicate that the Mg substituted Co_4−xMg_xNb₂O₉ (x = 1) could serve as a potential candidate material for applications in future logic spintronics and logic devices.     

Two separate Li ionic motions observed by Li and B NMR in xLi2S + (1 − x)B2S3 glassy fast ionic conductors

Studies of ion dynamics in the highly conductive glassy fast ionic conductor (FIC) xLi₂S + (1 − x)B₂S₃ (x = 0.65 and 0.70) were made with NMR nuclear spin lattice relaxation (NSLR) R₁(ω, T) of both mobile ⁷Li and immobile ¹¹B ions, and ⁷Li NMR line narrowing δν(T). The possible dependence of ion dynamics on the short range order structures (SRO) and the distribution of activation energies (DAE) in this highly conductive FIC was investigated. Two Gaussian DAE were employed to fit ⁷Li NSLR data, where each Gaussian DAE was correlated to a separate ¹¹B NSLR in a BS₃ and in a BS₄ group. The long range diffusion of Li ions among BS₃ groups and a seemingly localized ionic hopping motion around BS₄ group is suggested as a microscopic model for the ion dynamics in thioborate glasses, namely a ‘two channel relaxation’.     

Synthesis and structural characterisation of YSr2Cu3−xMxO7±y (M = Fe, Ti, Al, Co, Ga, Pb; 0.5 < x < 1), and the non-existence of the parent phase YSr2Cu3O7

The possibility of synthesising phases of general composition YSr₂Cu_3−xM_xO_7±y has been examined for a wide variety of metals M. Single phase tetragonal products (typically a = 3.83 Å, c = 11.5 Å) can be synthesised provided that the concentration of M is sufficiently large (x > 0.5), and M has a preference for the Cu(1) sites (the four-coordinate sites) of the YBa₂Cu₃O₇, structure. Neutron diffraction has demonstrated that a high degree of disorder exists in the (001) planes containing the M cations and, in particular, significant oxygen displacements are found. The non-existence of the unsubstituted variant YSr₂Cu₃O₇ is explained in terms of the high degree of compressive stress on the Cu(1) sites which could exist in such a material.     

First-principles study of electronic structure and magnetic properties of SrTi1−xMxO3 (M= Cr,Mn, Fe,Co, or Ni)

We used first-principles calculations to conduct a comparative study of the structure and the electronic and magnetic properties of SrTiO₃ doped with a transition metal (TM), namely, Cr, Mn, Fe, Co, or Ni. The calculated formation energies indicate that compared with Sr, Ti can be substituted more easily by the TM ions. The band structures show that SrTi_0.875Cr_0.125O₃ and SrTi_0.875Co_0.125O₃ are half metals, SrTi_0.875Fe_0.125O₃ is a metal, and SrTi_0.875Mn_0.125O₃ is a semiconductor. The 3d TM-doped SrTiO₃ exhibits various magnetic properties, ranging from ferromagnetism (Cr-, Fe-, and Co-doped SrTiO₃) to antiferromagnetism (Mn-doped SrTiO₃) and nonmagnetism (Ni-doped SrTiO₃). The total magnetic moments are 4.0_μB, 6.23_μB, and 2.0_μB for SrTi_0.75Cr_0.25O₃, SrTi_0.75Fe_0.25O₃, and SrTi_0.75Co_0.25O₃, respectively. Room-temperature ferromagnetism can be expected in Cr-, Fe-, and Co-doped SrTiO₃, which agrees with the experimental observations. The electronic structure calculations show that the spin polarizations of the 3d states of the TM atoms are responsible for the ferromagnetism in these compounds. The magnetism of TM-doped SrTiO₃ is explained by the hybridization between the TM-3d states and the O-2p states.     

Electrons and holes in undoped Nd2CuO4

Nd₂CuO_4±δ is the non-superconducting prototype of the Re_2−xM_xCuO₄t−y family (Re=Pr, Nd, Sm and M=Ceor Th) of n-type oxide superconductors. Four-probe DC conductivity, EMF in P(O₂) gradient, and thermopower measurements have been used to characterise its electric transport and defect structure between 300 and 900°C and between 5×10⁻⁴ and 1 atm oxygen partial pressure.

The results show that Nd₂CuO_4±δ can be oxygen under-stoichiometric (with n-type conductivity), near-stoichiometric, and over-stoichiometric (with p-type conductivity) in different T, P(O₂) ranges.     

过渡金属硼碳化物TM_3B_3C和TM_4B_3C_2稳定性和性能的理论计算

在过渡金属轻元素化合物中,寻找新的硬质或者超硬材料是当前的一个研究热点.目前寻找范围多集中在过渡金属硼化物、碳化物和氮化物等二元体系,三元相的研究则相对较少.本文以已知Nb_3B_3C和Nb_4B_3C_2结构为模板,采用元素替代法构建了29种TM_3B_3C (TM为过渡金属元素)结构和29种TM_4B_3C_2结构,采用基于密度泛函理论的第一性原理计算方法,成功找到了热力学、动力学以及力学都稳定的Ta_3B_3C和Ta4B_3C2两种新相.结构搜索计算确认了这两相为全局能量最优结构.能带结构和态密度的计算显示这两相均为导体,导电性主要源于Ta原子的d电子.这两种新相的硬度大约为26 GPa,说明Ta_3B_3C和Ta_4B_3C_2属于高硬度材料,但不是超硬材料.     

Al,Fe, Mg掺杂Li2MnSiO4的电子结构和电化学性能的第一性原理研究

硅酸锰锂作为锂离子电池正极材料因具有高的理论电容量而一直备受关注, 但其较低的导电率和较差的循环性能阻碍了进一步的发展. 采用第一性原理广义梯度近似GGA+U的方法, 研究了Al, Fe, Mg掺杂Li₂MnSiO₄的电子结构、 脱嵌锂电压和导电性. 研究发现, Al 掺杂的Li₂Mn_0.5Al_0.5SiO₄结构中载流子的数目增加, 电子自旋向上和向下的态密度均穿过费米能级, 呈现金属特性, 提高了体系的导电率. 脱锂Li_xMnSiO₄ (x=1, 0)结构中, 通过计算一次脱锂相结构的形成能得到Al掺杂的一次脱锂结构最稳定, 并且Al掺杂的脱锂相结构体积变化小, 有利于材料循环性能的提高, 同时第一个锂离子脱嵌电压与未掺杂时(4.2 V)相比降低到2.7 V. Fe掺杂降低了Li₂MnSiO₄的带隙, 第一个锂离子脱嵌电压降低到3.7 V. 研究表明, Al的掺杂效果优于Fe和Mg, 更利于硅酸锰锂电化学性质的提高.     

MC与$lt;i$gt;M$lt;/i$gt;$lt;sub$gt;$lt;i$gt;n$lt;/i$gt;+1$lt;/sub$gt;$lt;i$gt;AC$lt;/i$gt;$lt;sub$gt;$lt;i$gt;n$lt;/i$gt;$lt;/sub$gt;稳定性与电子特征的第一性原理研究

研究MC与M_n+1AC_n(M=Sc, Ti, V, Cr, Mn; A=Al, Si, P, S; n=1, 2, 3)结构的稳定性与电子特征有利于探究三元层状结构M_n+1AC_n稳定性的内在原因和设计新型M_n+1AC_n结构. 第一性原理计算研究表明, M-3d与C-2p轨道间的电子转移对MC与M_n+1AC_n 的形成焓有较大影响. 供电子能力较强的前过渡金属可以形成稳定的MC结构. 计算结果显示, MC结构是缺电子体系, 其趋向于与具有一定供电子能力的MA结构结合形成M_n+1AC_n. 与M₂PC和M₂SC 相比, M₂AlC和M₂SiC可以更为容易地被分离成二维 M₂C结构. 关键词： MAX相结构 第一性原理 电子结构 过渡金属碳化物     

Fixed charge and interface traps at heterovalent interfaces between Si(1 0 0) and non-crystalline Al2O3–Ta2O5 alloys

Characterization by Auger electron spectroscopy (AES) and Fourier transformation infrared spectroscopy (FTIR) confirms (Ta₂O₅)_x(Al₂O₃)_1−x alloys are homogeneous pseudo-binary alloys with increased thermal stability with respect to end member oxides, Ta₂O₅ and Al₂O₃. Capacitance–voltage (C–V) and current density–voltage (J–V) data as a function of temperate show that the Ta d-states of the alloys act as localized electron traps, and are at an energy approximately equal to the conduction band offset of Ta₂O₅ with respect to Si.     

Characterization of nonstoichiometric nickel manganite spinels NixMn3−x□3δ/4O4+δ by temperature programmed reduction

Cation deficient spinels Ni_xMn_3−x□_3δ/4O_4+δ (0≤x≤1) have been prepared by thermal decomposition of mixed oxalates Ni_x/3Mn_(3−x)/3(C₂O₄)·nH₂O in air at 623 K. They have been characterised by temperature programmed reduction (TPR) under H₂, the reaction being followed by gravimetric and powder X-ray diffraction measurements. It has been shown that TPR proceeds in several steps. The first steps correspond to the loss of nonstoichiometric oxygen leading to the formation of a stoichiometric oxide. During the following stages the manganese cations are reduced, causing the spinel structure to be destroyed, and the formation of solid solution of NiO in a cubic MnO. Subsequently, Ni²⁺ cations undergo a reduction to metallic nickel, and, finally, a mixture of nonstoichiometric MnO_1−δ and metallic nickel is formed. These oxides contain a high level of vacancies which vary with the nickel content with a maximum of δ≈1 near x=0.6. This nonstoichiometry is ascribed both to the presence of Ni³⁺ and excess of Mn⁴⁺.