Kinetics and mechanism of the collision-activated dissociation of the acetone cation

For center-of-mass collision energies E_cm = 1–60 eV, the major fragment ions for the collision-activated dissociation (CAD) of the acetone cation are the acetyl cation (m / z 43; absolute branching ratios of 0.96–0.60) and the methyl cation (m/ z 15; absolute branching ratios of 0.02–0.26); the absolute total cross-sections were 24–35) Ų. The breakdown curves (viz, plots of the absolute branching ratios versus E_cm) show complex, complementary energy dependences for production of MeCO⁺ and Me⁺, indicating apparent closure of the Me⁺ channel for E_cm > 30 eV. Our observations are consistent with a competition between three fast, primary (direct) reactions, each of which opens sequentially at its respective threshold energy (viz, reactions 8, 10, and 8′). 1 $$Me_2 CO^ + \cdot \to MeCO^ + + Me \cdot (X^2 A''_2 ) \Delta H = 0.82 eV$$ 1 $$ \to MeCO^ + + Me \cdot (B, 1^2 A'_1 ) \Delta H = 6.55 eV$$ 1 $$ \to Me^ + + Me \cdot + CO \Delta H = 4.24 eV$$ That is, the breakdown curves for MeCO⁺ and Me⁺ (and other CAD fragments) are consistent with the interpretation by other authors that the collisional activation of the acetone cation involves electronic transitions, so that CAD occurs primarily from isolated electronic states (i.e., non-quasi-equilibrium theory (QET) behavior). For acetone we found a correspondence between the photoelectron-photoion-coincidence and CAD breakdown curves. This may indicate that collisional activation in non-QET systems corresponds to scattering angles that emphasize optically allowed transitions accessed by photoionization.     

Kinetics and mechanism of the thermal decomposition reaction of acetone cyclic diperoxide in the gas phase

The kinetics of the thermal decomposition reaction of gaseous 3,3,6,6-tetramethyl-1,2,4,5-tetroxane (ACDP) in the presence of n-octane was studied in the 403.2–523.2 K temperature range. This reaction yields acetone as the organic product. Under optimum conditions, first-order kinetics were observed, included when the S/V ratio of the Pyrex reaction vessel was increased by a nearly six-fold factor. In the range 443.2–488.2 K the temperature dependence of the rate constants for the unimolecular reaction in conditioned vessels is given by In k₁/(s^?1) = (31.8 ± 2.5) ? [(39.0 ± 2.5)/RT]. The value of the energy of activation in kcal/mol correspond to one O? O bond homolysis of the ACDP molecule in a stepwise biradical initiated decomposition mechanism. At the lower reaction temperatures as well in preliminary experiments participation of a surface catalyzed ACDP decomposition process could be detected. © 1994 John Wiley & Sons, Inc.     

Kinetics and mechanism of the reaction of ozone with phenol in alkaline media

The kinetics of the reaction of O₃ with PhOH in alkaline medium has been studied. The rate of oxidation of phenol by ozone is directly proportional to the concentrations of reactants and increases in a complex manner with increase in alkali content in aqueous solution. The composition of the reaction products was investigated and it was found that dimers and oligomers of phenoxyl radicals predominate in alkaline medium. A mechanism is proposed for the process.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 320–324, February, 1991.     

Kinetics and mechanism of the gas-phase reaction of O(3P) atoms with acetone

The kinetics of the reaction of O(³P) atoms with acetone were investigated using fast flow methods. The reaction was studied over a temperature range of 298 to 478°K. The specific rate constant obtained was (1.9 ± 0.4) × 10¹² exp(—5040 ± 180/1.987 T) cm³/mol·sec. The observation of a sizable primary H/D kinetic isotope effect in comparing rates of CH₃COCH₃ and CD₃COCD₃ led to the conclusion that the major reaction channel involves H atom abstraction, namely, The rather low Arrhenius preexponential factor obtained in this reaction is compared and contrasted with those reported for other reactions of O(³P) with low molecular weight compounds.     

Kinetics and mechanism of oxidation of leucine by chloramine-T in alkaline media

Alkaline media oxidation of leucine by chloramine-T has been investigated. A first order dependence in chloramine-T and leucine and a near inverse first order dependence in hydroxide ion has been observed. Ionic strength had negligible effect while the effect of methanol addition was slightly negative. The oxidation process has been shown to proceed via two paths, one involving p-toluenesulfochloramide as the main oxidising species and the other involving hypochlorite ion, each interacting in a slow step with a leucine molecule leading to formation of monochloroleucine acid, which subsequently interacts with another molecule of p-toluenesulfochloramide or hypochlorite ion resp., yielding products.     

Kinetics and mechanism of chloramine-T oxidation of cinnamaldehyde in two acid media

Kinetics of oxidation of cinnamaldehyde (Cinn) by chloramine-T (CAT) has been studied in solutions containing HCl and H₂SO₄ at 313 K. The respective experimental rate laws obtained in HCl and H₂SO₄ media are as follows: and Here the value of x varies from 0.9 to zero while the values of y and z are 0.83 and 0.72, respectively. Effects, on the reaction rate, of ionic strength, reaction product (p-toluenesulfonamide), dielectric constant of the solvent medium, and the anions, Cl⁻ and SO₄²⁻, have been investigated. Activation parameters have been computed, based on the rate constants determined at different temperatures. Mechanisms proposed and the rate laws derived are consistent with the observed kinetic data represented by the experimental rate laws.     

Kinetics of the degradation of polystyrene in supercritical acetone

The kinetic analysis of the degradation of polystyrene (PS) in supercritical acetone has been studied using the nonisothermal weight loss technique with heating rates of 3, 5 and 7 °C/min. The weight loss data according to degradation temperature have been analyzed using the integral method based on Arrhenius form to obtain the kinetic parameters such as apparent activation energy and overall reaction order. The kinetic parameters obtained from this work were also compared with those of the thermal degradation of PS in nitrogen atmosphere. From this work, it was found that the activation energies of PS degradation in supercritical acetone were 73.3-200.7 kJ/mol and lower than those of the thermal degradation in nitrogen atmosphere.     

Kinetics and mechanism of the defluorination of 8-fluoropurine nucleosides in basic and acidic media

For investigating the stability of C(8)-fluorine bond in 8-fluoropurine nucleosides some protected 8-fluoroguanosine, 8-fluoroinosine and 8-fluoroadenosine derivatives were prepared by direct fluorination of acetyl-protected purine nucleosides with elemental fluorine in solvents such as chloroform, acetonitrile and nitromethane. Fluorination reactions conducted in chloroform medium gave better yields of 8-fluoropurines. The fluorination yields were slightly lower when acetonitrile or nitromethane was used as solvent, but the product purification was found to be much easier. When the synthesized, protected fluoronucleosides were subjected to standard basic (NH₃ in methanol or 2-propanol) and acidic (HCl in methanol) deprotection conditions relevant to nucleoside chemistry, an efficient defluorination reaction took place. The kinetics of these defluorination reactions were conveniently followed, under pseudo-first-order reaction conditions, using ¹⁹F NMR spectroscopy. ¹H NMR, LC-MS and mass spectroscopy identified the products of the kinetic reaction mixtures. The defluorination reaction rate constants (k_obs) in basic media depended upon the electron density at C(8) while the k_obs data in acidic medium were determined by the pK_a of N⁷. An addition-elimination based mechanism (S_NAr) has been proposed for the defluorination reactions of these 8-fluoropurine nucleosides.     

Kinetics and mechanism of amitraz hydrolysis in aqueous media by HPLC and GC-MS

Degradation processes of amitraz in aqueous media have been studied by spectrophotometry, HPLC and GC-MS. Amitraz undergoes hydrolysis reactions at any pH, but towards the acidic pH range hydrolysis proceeds at a faster rate. Depending on the pH value, different products of the hydrolysis have been identified. The main degradation products are 2,4-dimethylaniline at very acidic pH values (pH<3), N-(2,4-dimethylphenyl)-N'-methylformamidine and 2,4-dimethylphenylformamide at less acidic media (pH 3-6) and 2,4-dimethylphenylformamide at basic pH. The mechanisms of the different hydrolysis processes have been elucidated.     

Kinetics and mechanism of permanganate oxidation of pectin polysaccharide in acid perchlorate media

The kinetics of oxidation of pectin polysaccharide as a natural polymer by permanganate ion in aqueous perchloric acid at a constant ionic strength of 2.0 mol dm⁻³ has been investigated spectrophotometrically. The reaction time curves showed two distinct stages, the initial stage was relatively slow, followed by an increase in the rate of oxidation at longer times. The results of the initial rates reveal first-order kinetics in permanganate ion and fractional-order with respect to pectin concentration. Kinetic evidence for the formation of an intermediate complex between the polysaccharide and the oxidant is presented. The results obtained at various hydrogen ion concentrations showed that the reaction is acid catalyzed. The added salts lead to the prediction that Mn⁴⁺ and/or Mn³⁺ play an important role in the autoaccleration period kinetics. A tentative reaction mechanism consistent with the kinetic results is discussed.     

Kinetics and mechanism of bromamine-T oxidation of some cyclic ketones in acidic media

Kinetics of the oxidation cyclopentanone and cyclohexanone by bromamine-T(BAT) have been reported in perchloric acid media. A zero order dependence to BAT and first order dependence on both ketones and hydrogen ion concentrations have been observed. Observed stoichiometry, zero effects of ionic strength of the medium and p-toluenesulphonamide (TSA) and a negative dielectric effect point to a mechanism involving acid catalysed enolisation of ketones in the slow and rate determining step, followed by its subsequent fast interaction with BAT giving corresponding 1,2-diketones as final products. A solvent isotope effect (kD₂O/kH₂O = 2.0–2.2 (35°), 2.1–2.3 (40°) and 2.2–2.4 (35°), 2.3–2.5 (40°) for cyclopentanone and cyclohexanone, respectively) has been observed. Various thermodynamic parameters have been computed.     

Kinetics and mechanism of the oxidation of some aliphatic ketones by n-bromoacetamide in acidic media

Kinetics of the oxidation of methyl ethyl ketone (MEK) and diethyl ketone (DEK) by N-bromoacetamide (NBA) have been studied in perchloric acid media in the presence of mercuric acetate. A zero order dependence to NBA and a first-order dependence to both ketones and H⁺ have been observed. Acetamide, mercuric acetate and sodium perchlorate additions have negligible effect while addition of acetic acid has a positive effect on the reaction rate. A solvent isotope effect (K₀D₂O/k₀H₂O = 2.–.4 and 2.2-2.5 for MEK and DEK, respectively) has been observed at 40°. Kinetic investigations have revealed that the order of reactivity is MEK > DEK. The rates were determined at four different temperatures and the activation parameters were evaluated. The main product of the oxidation is the corresponding 1,2-diketone. A suitable mechanism consistent with the above observations has been proposed.     

Kinetics of uptake of cadmium by Chlorella marina in different media

The kinetics of cadmium binding to living Chlorella marina cells during a short time (a few minutes) has been studied in seawater conditions, being also considered separately the influence of calcium and chloride. Cadmium complexes with surface groups of C. marina cells are labile in terms of differential pulse anodic stripping voltammetry in media (0.01-0.7) M NaNO3 since the complexation reaction is kinetically fast. However, in media 0.7 M NaCl, 0.7 M NaCl + 10(-2) M Ca2- and in synthetic seawater diluted 1:4 or not, the complexes are inert, since kinetics is determined by the rate of exchange with alkaline-earth metals and/or the chloride anion.     

Kinetics and mechanism of the thermal decomposition reaction of acetone cyclic diperoxide in methyl tert‐butyl ether solution

The thermal decomposition reaction of acetone cyclic diperoxide (3,3,6,6‐tetramethyl‐1,2,4,5‐tetroxane, ACDP), in the temperature range of 130.0–166.0°C and initial concentrations range of 0.4–3.1 × 10^?2 mol kg^?1 has been studied in methyl t‐butyl ether solution. The thermolysis follows first‐order kinetic laws up to at least ca 60% ACDP conversion. Under the experimental conditions, the activation parameters of the initial step of the reaction (ΔH^# = 33.6 ± 1.1 kcal mol^?1; ΔS^# = ?4.1 ± 0.7 cal mol^?1 K^?1; ΔG^# = 35.0 ± 1.1 kcal mol^?1) and acetone, as the only organic product, support a stepwise reaction mechanism with the homolytic rupture of one of its peroxidic bond. Also, participation of solvent molecules in the reaction is postulated given an intermediate diradical, which further decomposes by C? O bond ruptures, yielding a stoichiometric amount of acetone (2 mol per mole of ACDP decomposed). The results are compared with those obtained for the above diperoxide thermolysis in other solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 302–307, 2004     

Kinetics and mechanism of chromic acid oxidation of oxalic acid in absence and presence of different acid media. A kinetic study

Kinetics and mechanism of the reaction of Cr(VI) with oxalic acid have been studied in presence and absence of H₂SO₄, HClO₄, and CH₃COOH by monitoring the formation of Cr(III)-oxalic acid complex at 560 nm. The effect of total [oxalic acid], [Cr(VI)], [H₂SO₄], [HClO₄], and [CH₃COOH] on the reaction rate was determined at 30°C. Formation of carbon dioxide was also confirmed. The oxidation rate increases with [oxalic acid] and [CH₃COOH] while it decreases with [H₂SO₄], [HClO₄], and pH. The rate law governing the oxidation of oxalic acid over a wide range of conditions is rate=k₁ K_es1 [oxalic acid]_T [Cr(VI)]_T 1+K_es1 [oxalic acid]_T, where only undissociated oxalic acid is kinetically active. Kinetic evidence for the formation of a Cr(VI)(SINGLEBOND)oxalic acid 1:1 complex has been obtained and the equilibrium constant for their formation has been determined. The 1:1 complex exists most likely in an open chain form. The rate-limiting step of the oxidation reaction involves the breaking of the C(SINGLEBOND)C bond in the 1:2 complex. Oxidizing ability of Cr(VI) species have been discussed. Mechanism with the associated reaction kinetics is assigned. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 335–340, 1998     

Decomposition of cyclic acetone peroxides in acid media

The kinetics and stoichiometry of the formation of active oxygen (AO) in the acidic decomposition of trimeric (TATP) and dimeric (DADP) cyclic acetone peroxides are considered. Fe(III) produced as a result of Fe(II) oxidation with active oxygen has been determined using rhodanide procedure. The kinetics of the formation of active oxygen is described by a first order equation. The effective rate constant of TATP decomposition depends on the Hammett acidity function H ₀: log k _eff = ?H ₀ ? 2.6 (k _eff is in s^?1). Consequently, the decomposition rate of TATP is limited by protonation. In the HCl and H₂SO₄ concentration range from 0.006 to 2.9 mol/L, the decomposition of DADP occurs with k _eff = 0.0010 ± 0003 s^?1 at a Fe(II) concentration of 3.5 mmol/L and k _eff depends linearly on the concentration of Fe(II).     

Kinetics and mechanism for the aquation of bismalonatoethylenediaminecobaltate(III) ion in acid perchlorate media

Summary The title complex aquates in acid media, first to [Co(mal)-(H₂O)₂(en)]⁺ (1) (Step 1) and subsequently to [Co(H₂O)₄(en)]³⁺ (2) (Step 2). Complex species (1) has been separated and characterised in solution. While Step 1 involves only a second-order acid catalysed path, Step 2 involves both a first-order acid independent path and a second-order acid catalysed path. The rate constants and activation parameters evaluated for these reaction paths have been compared with those for similar carboxylato-cobalt(III) complexes. This, together with an observed isokinetic relation, indicates that the rate-determining step involves opening of the unprotonated (in the spontaneous acid independent path) or the protonated (for the acid catalysed path) chelate ring of the malonate ligand and insignificant solvation of the central metal ion.     

Kinetics and mechanism of the reaction between silver(III) and thiourea in aqueous alkaline media

The tetrahydroxoargentate(III) ion, Ag(OH)₄⁻, is rapidly reduced by thiourea (tu) in accordance with the three term rate law RATE = {k₁+(k₂+k₃[OH⁻])[tu]}[Ag^III] where k₁ = 1.08 s⁻¹, k₂ = 1.46 x 10³ M⁻¹ s⁻¹, and k₃ = 2.02 x 10³ M⁻² s⁻¹. The k₁ path occurs via the rate-determining aquation of Ag(OH)₄⁻ while the other two paths involve axial attack of thiourea on silver. The higher values of k₂ and k₃ compared to the ethylenediamine reaction, which obeys the same rate law, is a reflection of the greater nucleophilicity of tu.

Following the redox reaction, solutions become brown in a reaction that obeys pseudo-first-order kinetics. Similar behaviour is observed when tu is replaced by Na₂S or thio-acetamide and when Ag^I reacts with any of these sulphur containing compounds. We attribute this process to the Ag^I promoted formation of sulphide species which eventually precipitate as Ag₂S.     

Kinetics and mechanism of oxidation of acetone,ethyl methyl ketone and diethyl ketone with chloramine-T in hydrochloric acid medium

The kinetics of oxidation of aliphatic ketones (acetone, ethyl methyl ketone and diethyl ketone) by chloramine-T in presence of hydrochloric acid (0.1 to 0.3M) have been investigated at 30 °C. The rate of disappearance of chloramine-T has been found to be first order each with respect to oxidant, ketone and [H⁺], in the range of the acid concentrations studied. The thermodynamic and kinetic parameters have been evaluated by determining the rate constants at different temperatures. The products of the reaction have been identified as chloroketones by their NMR spectra. The solvent isotope effect has been studied in the case of the oxidation of acetone and ethyl methyl ketone. A mechanism has been proposed.