The standard enthalpy of formation of fullerene chloride C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>

A rotating-bomb calorimeter was used to measure the energy of combustion of crystalline fullerene chloride C₆₀Cl₃₀ · 0.09Cl₂, Δ_c U° = (?24474 ± 135 kJ/mol). The result was used to calculate the standard enthalpy of formation, Δ_f H° (C₆₀Cl₃₀, cr) = 135 ± 135 kJ/mol, and the C-Cl bond energy, 195 ± 5 kJ/mol. The C-X (X = F, F, Cl, and Br) bond energies in fullerene C₆₀ derivatives and other organic compounds are compared.     

Reactivity of fullerene C<Subscript>60</Subscript>

The results of a quantum-chemical study of the reactivity of fullerene C₆₀ in such reactions as polymerization (dimerization), cycloaddition, addition of valence-saturated molecules are presented. The mechanisms of these reactions are also discussed.     

Aqueous dispersions of C<Subscript>60</Subscript> fullerene

Stable aqueous colloidal dispersions of C₆₀ fullerene are prepared. A solvatochromic effect is revealed upon the addition of C₆₀ solution in chlorobenzene to a water-acetone mixture.     

The saturated hydrides of C<Subscript>60</Subscript>:F<Subscript>5</Subscript>F<Subscript>6</Subscript> PK F<Subscript>5</Subscript>F<Subscript>7</Subscript> isomers

The carbon cages composed of pentagons and heptagons (F₅F₇ isomers) are the analogs of fullerenes composed of pentagons and hexagons (F₅F₆ isomers). To provide insight into the structures and stability of the hydrides of F₅F₆ and F₅F₇ isomers, systematical density functional theory calculations are performed on all the 1,812 F₅F₆–C₆₀H₆₀ and 56 F₅F₇–C₆₀H₆₀. The calculated results demonstrate that the isomer with lowest/highest energy has most/fewest fused pentagons for both F₅F₆ and F₅F₇ hydrides and the stability of these hydrides increase with the number of fused pentagons roughly. The lowest energy F₅F₆–C₆₀H₆₀ and F₅F₇–C₆₀H₆₀ are 237.1 and 152.5 kcal/mol lower in energy than the isolated pentagon rule (IPR) C₆₀H₆₀, respectively; however, these two parent cages are 529.6 and 660.0 kcal/mol higher in energy than the IPR C₆₀. The calculations suggest that heptagon-containing cages, not only those violating the IPR can be the candidate cages for fullerene derivatives and the possible repulsion between the added atoms may play an important role in determining the structures and stability of the hydrides of carbon cages.     

Synthesis of fullerene C<Subscript>60</Subscript> monoadducts. Cyclopropanation of C<Subscript>60</Subscript> with sulfonium ylides

3′H-Cyclopropa[1,9](C₆₀-I_h)[5,6]fullerene-3′-carboxylic acid can be synthesized in a good yield by cyclopropanation of fullerene C₆₀ with 2-(dimethyl-λ⁴-sulfanylidene)acetates provided that the ester residue is readily hydrolyzable in acid medium.     

Synthesis and structures of C<Subscript>60</Subscript> fullerene chlorides

Systematic study of chlorination of fullerene C₆₀ with inorganic chlorides SbCl₅, VCl₄, MoCl₅, and KICl₄ was carried out. Higher chlorofullerenes, viz., T _h -C₆₀Cl₂₄, C₆₀Cl₂₈, C ₂-C₆₀Cl₃₀, and D _3d -C₆₀Cl₃₀, can be prepared depending on the temperature and time of chlorination. The molecular and crystal structures of C₆₀Cl₂₄⋅VOCl₃, C₆₀Cl₃₀⋅2CS₂, and C₆₀Cl₃₀O_1.22 were determined by single-crystal X-ray diffraction. Fullerenes C₆₀Cl₂₈ and C ₂-C₆₀Cl₃₀ were shown to be only kinetically stable, whereas D _3d -C₆₀Cl₃₀ is a thermodynamically stable product. Transformations of less chlorinated fullerenes into more chlorinated products are accompanied by substantial changes in the addition patterns. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1608–1618, July, 2005.     

Direct phosphorylation of fullerene C<Subscript>60</Subscript> with phosphine

Fullerene C₆₀ reacts with phosphine (PH3) under free radical initiation conditions (azobis(isobutyronitrile), xylene, 65°C, 6–11 h) to give in the presence of air oxygen functional oligofullerenes (yield up to 32%) containing functional groups of phosphinic and phosphonic acids.     

The structural-phase state of C<Subscript>60</Subscript>-C<Subscript>70</Subscript> fullerene mixtures

The structural and phase state of the C₆₀-C₇₀ system at various C₆₀/C₇₀ ratios in mixtures obtained by the vaporization of solutions in toluene at ∼98°C was studied by X-ray structure analysis, differential scanning calorimetry, and infrared spectroscopy. Solid solutions based on the face-centered cubic packing of C₆₀ are not formed in the C₆₀-C₇₀ system at C₇₀ contents from 0.5 to 50 wt %. The hexagonal close packing of a solid solution of C₆₀ in C₇₀ can be formed as a result of the thermally activated decomposition of the ternary crystal solvate in the C₆₀-C₇₀-C₆H₅CH₃ system. The structural state of multiphase mixtures formed under conditions far from equilibrium is characterized by a high degree of structure imperfection and greater ability to undergo oxidation compared with C₆₀ and C₇₀.     

Covalent binding of fullerene C<Subscript>60</Subscript> to pharmacologically important compounds

The cycloaddition of diazo compounds derived from α-tocopherol, betulinic acid, ursolic acid, and Trolox methyl esters to fullerene C₆₀ in the presence of a Pd(acac)₂-PPh₃-Et₃Al catalytic system was performed. The reactions of the diazo compounds derived from the above-mentioned pharmacologically important compounds with fullerene C₆₀ in the presence of the Pd(acac)₂-PPh₃-Et₃Al system (1: 2: 4) afford predominantly the previously inaccessible pyrazolinofullerenes. A change in the component ratio of the Pd(acac)₂-PPh₃-Et₃Al catalyst from 1: 2: 4 to 1: 4: 4 favors the formation of methanofullerenes exclusively.     

Bis(Allyloxycarbonyl)methano derivatives of fullerene C<Subscript>60</Subscript>

Mono-, bis-, tris-, tetrakis-, and hexakis-substituted cyclopropanation products of fullerene C₆₀ with diallyl malonate were synthesized according to Bingel-Hirsch. Except for the monocyclopropanation product, all other adducts were isolated as mixtures of regioisomers.     

Catalytic hydroamination of fullerene C<Subscript>60</Subscript> with primary and secondary amines

Catalytic 1,2-hydroamination of fullerene C₆₀ with primary and secondary amines in the presence of Ti, Zr, and Hf complexes gave the corresponding alkyl-, aryl-, and hetarylaminodihydrofullerenes.     

Nafion-based composite solid electrolytes containing water-soluble fullerene C<Subscript>60</Subscript> derivatives

Nafion-based composite solid polyelectrolytes containing fullerene C₆₀ and its water-soluble derivatives fullerenol-C₆₀ and tris-malonate-C60 were studied by the impedance spectroscopy method. It was found that introduction of these dopants in Nafion leads to a substantial increase in proton conductivity of the composites in the region of low relative humidity. The reasons for the influence of dopants on proton conductivity of composites were discussed.     

Effect of fullerene C<Subscript>60</Subscript> on copolymerization parameters of methyl methacrylate with compounds containing allyl bond

The effect of fullerene C₆₀ on copolymerization of methyl methacrylate with compounds, one of which is a typical allyl monomer and the other is a vinyl monomer with a side allyl bond, was examined. The kinetic parameters of the reactions and the copolymerization constants of monomers in the absence and in the presence of fullerens were determined. Based on the UV spectrometric data, the material balance was calculated and a variation of the molar extinction coefficient of fullerene was revealed.     

Kinetics and products derived from C<Subscript>60</Subscript> fullerene radiolysis in toluene

C₆₀ fullerene was radiolyzed in toluene solution both in presence of air and in vacuum at four different radiation doses 12, 24, 36, 48 and 96 kGy. Clear evidences of the addition of benzyl radicals to the fullerene cage derive from FT-IR and C¹³-NMR spectra of the reaction product. In presence of air the interference of oxygen is evident in the FT-IR spectra and from the elemental analysis. A detailed analysis of the kinetics of the multiple addition of benzyl radicals to the fullerene cage was made spectrophotometrically with the determination of the addition rate constants at the each addition step and the average number of benzyl groups added to the fullerene cage as function of the radiation dose.     

Self-assembling of fullerene C<Subscript>60</Subscript> into (C<Subscript>60</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clasters in aromatic solvents

Self-assembling of fullerene C₆₀ into (C₆₀) _n clusters in aromatic solvents was studied. The role of the π-π interactions and dispersion forces in the (C₆₀) _n cluster formation in these media is demonstrated using the data on the solubility of fullerene C₆₀ in these solvents and their ionization potentials and also spectral characteristics of fullerene C₆₀ in the range of 326–340 nm in different solvents.     

Quantitative analysis of compression isotherms of fullerene C<Subscript>60</Subscript> Langmuir layers

The structure of fullerence C₆₀ Langmuir layers formed from a solution in cyclohexane has been determined from their compression isotherms. The layer structure, in particular, the size of formed aggregates, has been shown to depend on the initial surface concentration of fullerene. A quantitative model of the Langmuir layer has been proposed. Degrees of water surface coverage with fullerene (the initial one and that corresponding to the onset of one-phase state formation), intermolecular distances of fullerene in aquaaggregates, aggregation numbers, and distances between aquaaggregates have been found to play the role of the model parameters. Constants characterizing the structure of a stable monolayer have been determined on the basis of the formulated model.     

Catalytic cycloaddition of diazoalkanes with heterocyclic substituents to fullerene C<Subscript>60</Subscript>

Methanofullerenes were directly synthesized under mild conditions by cycloaddition to fullerene C₆₀ of diazoalkanes generated in situ by oxidation of ketone hydrazones containing a heterocyclic fragment with manganese(IV) oxide in the presence of the catalytic system Pd(acac)₂-2 PPh₃-4 Et₃Al.     

Cycloaddition of diazoacetates to C<Subscript>60</Subscript> fullerene catalysed by Pd complexes

An efficient catalytic method of the cycloaddition to C₆₀ fullerene of the diazoacetates, containing substituents of diverse structures in ester groups, in the presence of a Pd-based three-component catalyst was developed. An influence of nature and the structure of substituent in the ester group on the activity of diazoacetates in the reaction with C₆₀ was studied. Yields of respective cycloadducts were determined.