Skeletal reorganization of enynes to 1-vinylcycloalkenes catalyzed by GaCl(3)

The skeletal reorganization of enynes is achieved by the presence of GaCl3 as the catalyst. This reaction demonstrates the first example of the skeletal reorganization of enynes catalyzed by typical metal complexes. The process is simple and provides a diverse range of enynes in good to high yields. The reaction of enynes bearing a monosubstituent at the terminal olefinic carbon proceeds in a stereospecific manner with respect to the geometry of the olefin moiety. Enynes, bearing two substituents at the olefinic terminal carbon, undergo an efficient skeletal reorganization, these substrates having been known to be unsuitable substrates for the skeletal reorganization of enynes.     

Rh(II)-catalyzed skeletal reorganization of enynes involving selective cleavage of C-C triple bonds

Treatment of enynes with a catalytic amount of Rh(II) complex results in skeletal reorganization to give cis-configured 1-vinylcycloalkenes, the formation of which occurs via double cleavage of both C-C double and C-C triple bonds.     

Skeletal reorganization of enynes into 1-vinylcycloalkenes in ionic liquids

The skeletal reorganization of enynes catalyzed by transition metal chlorides, such as PtCl(2), [RuCl(2)(CO)(3)](2), [RhCl(CO)(2)](2), and AuCl(3), in ionic liquids proceeds under milder conditions (at lower reaction temperatures and for shorter reaction times) than those needed for ordinary solvents. The products produced by the skeletal reorganization of enynes were easily removed from the catalyst by a simple extraction with Et(2)O or distillation. The PtCl(2) can be reused up to five times.     

Effective synthesis of aryl ethers and coumaranones employing the palladium-catalyzed enyne-diyne

Alkyl-, alkoxy-, and aryloxy-substituted conjugated enynes 1 in the presence of Pd(PPh(3))(4) catalyst smoothly underwent the regiospecific [4 + 2] cycloaddition reaction with conjugated alkyl- and alkoxy-substituted symmetric diynes 2 to give multisubstituted aryl ethers 3 in good to high yields. Benzannulation of enynes 1d-g with unsymmetric diyne 6, possessing alkyl and alkoxy groups at acetylenic terminii, in most cases produced an aromatic product 8 with an alkoxy group of diyne attached to the ethynyl moiety of the aromatic product. Remarkably, alkoxy-substituted diynes 2c and 6 underwent the benzannulation reaction with 1 at an unusually low temperature of 0 degrees C! One-pot consecutive benzannulation of alkyl-substituted enynes 1d,e and alkoxy-substituted enynes 1f,g with alkoxy-substituted diynes 2c and 6 followed by protonolysis with TsOH afforded coumaranones 9a-c and 10 in reasonable to high overall yields.     

cis-Carbocuperation of acetylenic sulfoxides and corresponding applications in the regio- and stereoselective synthesis of polysubstituted vinyl sulfoxides

cis-Carbocuperation reaction of monoorganocopper reagent with acetylenic sulfoxides, followed by electrophilic reaction with a variety of electrophiles, provided a regio- and stereoselective method to prepare the versatile polysubstituted vinyl sulfoxides. Sonogashira cross-coupling reaction of the obtained α-iodovinyl sulfoxides with terminal acetylenes was also investigated to afford the versatile conjugate sulfinyl enynes.     

氢氧化铯促进下硒、端炔及卤代烃反应合成炔硒醚

DMF作溶剂, 4Å分子筛存在下, 将端炔、CsOH、硒粉在室温搅拌2 h, 然后加入溴代烃或二芳基碘盐, 在室温下搅拌20 h, 得炔硒醚, 收率约60%. 反应机理为端炔与氢氧化铯作用形成炔化铯, 然后元素硒进行C—Cs键插入形成炔硒化铯, 炔硒化铯对溴代烃或二芳基碘盐进行亲核取代得到相应的炔硒醚     

Intramolecular Pauson-Khand reactions of methylenecyclopropane and bicyclopropylidene derivatives as an approach to spiro(cyclopropanebicyclo[n.3.0]alkenones)

The trimethylsilyl-protected enynes 9a-c and 14a,b with alkynyl substituents on the three-membered ring or on the double bond of a methylenecyclopropane or a bicyclopropylidene moiety were prepared in two steps from the alcohols 6a-c and 12a,b, respectively, by conversion to the iodides and their coupling with lithium (trimethylsilyl)acetylide (8) in 38-73% overall yields. The bicyclopropylidene derivative 9d was synthesized in 49% yield directly from bicyclopropylidene (3) by lithiation followed by coupling with (5-iodopent-1-ynyl)trimethylsilane (11). Enynes 9b-d were protiodesilylated by treatment with K2CO3 in methanol to give the corresponding unprotected enynes 10b-d in 53, 74 and 94% yield, respectively. Enynes 17a-c with a carbonyl group adjacent to the acetylenic moiety were synthesized from oxo derivatives 15a-c by Wittig olefination followed by coupling with 8 in 47, 18 and 12% overall yield, respectively. Pauson-Khand reactions of the methylenecyclopropane derivatives with a substituent on the ring (9a,b and 10a) as well as on the double bond (14a,b and their in situ prepared protiodesilylated analogues) proceeded smoothly by stirring of the corresponding enyne with [Co2(CO)8] in dichloromethane at ambient temperature followed by treatment of the formed complexes with trimethylamine N-oxide under an oxygen atmosphere at -78 degrees C to give tricyclic or spirocyclopropanated bicyclic enones 18a,b, 19a, 20a,b, 21a,b in good yields. Alkynylbicyclopropylidene derivatives 9c,d and 10c,d formed the corresponding cobalt complexes at -78 to -20 degrees C. Treatment of the latter with N-methylmorpholine N-oxide under an argon atmosphere at -20 degrees C gave the spirocyclopropanated tricyclic enones 18c, 19c and 18d in 31-45% yields. The structure of 19c was proved by X-ray crystal structure analysis. The cyclization of enynones 17a-c in MeCN at 80 degrees C gave the spirocyclopropanated bicyclic diketones 22a-c in 38-65% yields. Intramolecular PKRs of the enynes 25a,d with a chiral auxiliary adjacent to the triple bond gave the corresponding products 26a,d in 70 and 79% yield, respectively, as 5:1 and 8:1 mixtures of diastereomers, respectively. Addition of lithium dimethylcuprate or higher order cuprates to the double bond of the former furnished bridgehead-substituted bicyclo[3.3.0]octanones 27a-c in 57-86% yields. Protiodesilylation of 27a followed by acetal cleavage gave the enantiomerically pure spirocyclopropanated bicyclo[3.3.0]octanedione (1R,5R)- 29a with [alpha]D(20)=-148 (c=1.0 in CHCl3) in 55% overall yield.     

Cyclizations of enynes catalyzed by PtCl2 or other transition metal chlorides: divergent reaction pathways.

1-en-6-ynes react with alcohols or water in the presence of PtCl2 as catalyst to give carbocycles with alkoxy or hydroxy functional groups at the side chain. The reaction proceeds by anti attack of the alkene onto the (eta2-alkyne)platinum complex. The formation of the C-C and C-O bonds takes place stereoselectively by trans addition of the electrophile derived from the alkyne and the nucleophile to the double bond of the enyne. Formation of five- or six-membered carbo- or heterocycles could be obtained from 1-en-6-ynes depending on the substituents on the alkene or at the tether. Although more limited in scope, Ru(II) and Au(III) chlorides also give rise to alkoxy- or hydroxycyclization of enynes. On the basis of density functional theory (DFT) calculations, a cyclopropyl platinacarbene complex was found as the key intermediate in the process. In the presence of polar, nonnucleophilic solvents, 1-en-6-ynes are cycloisomerized with PtCl2 as catalyst. Formation of a platinacyclopentene intermediate is supported by DFT calculations. The reaction takes place by selective hydrogen abstraction of the trans-allylic substituent. Cycloisomerization of enynes containing disubstituted alkenes could be carried out using RuCl3 or Ru(AsPh3)4Cl2 in MeOH.     

Regio- and stereospecific synthesis of novel 3-enynyl-substituted thioflavones/flavones using a copper-free palladium-catalyzed reaction

[reaction: see text] A variety of 3-enynyl substituted flavones/thioflavones were synthesized via a sequential one-pot procedure using copper-free palladium-catalyzed cross coupling in a simple synthetic operation. The cross coupling between 3-iodo(thio)flavone and a broad range of terminal alkynes was carried out in the presence of Pd(PPh3)2Cl2 and triethylamine to afford the corresponding 3-enynyl derivatives in a regio- and stereoselective fashion. The best results are obtained by employing 3 equiv of the terminal alkynes. The process worked well irrespective of the substituents present on the (thio)flavone ring as well as in the terminal alkynes except arylalkynes. The reaction is quite regioselective, placing the substituent of the terminal alkyne at the far end of the double bond attached with the (thio)flavone ring. The orientation of the (thio)flavonyl and acetylenic moieties across the double bond was found to be syn in the products isolated. A tandem C-C bond-forming reaction in the presence of palladium catalyst rationalized the formation of coupled product. The catalytic process apparently involves heteroarylpalladium formation, regioselective addition to the C-C triple bond of the terminal alkyne, and subsequent displacement of palladium by another mole of alkyne. The present methodology is useful for the introduction of an enynyl moiety at the C-3 position of flavones and thioflavone rings to afford novel compounds of potential biological interest. In the presence of CuI the process afforded 3-alkynyl (thio)flavones in good yields.     

Iron-catalyzed enyne cross-coupling reaction

In the presence of 0.5-1 mol % of FeCl(3) with lithium bromide as a crucial additive, alkynyl Grignard reagents, prepared from the corresponding alkynes and methylmagnesium bromide, react with alkenyl bromides or triflates to give the corresponding conjugated enynes in high to excellent yields. The reaction shows wide applicability to various terminal alkynes and alkenyl electrophiles.     

Addition du di-t-butyl-zinc a la triple liaison des enynes conjugues,simples et fonctionnels

Di-t-butylzinc adds easily to conjugated enynes

. Only the acetylenic bond is involved in this reaction which proceeds via trans-addition. This regioselective and stereoselective addition leads to conjugated dienes

.     

Stereoselective synthesis of enediynes and enynes by condensation of aldehydes with γ-(trialkylsilyl)allenylboranes

Enediynes and enynes with high geometric purity were synthesized by treating acetylenic and simple aldehydes with γ-(tert-butyldimethylsilyl)allenylborane 2a followed by the elimination step of the Peterson olefination reaction.     

Selective ruthenium-catalyzed transformations of enynes with diazoalkanes into alkenylbicyclo[3.1.0]hexanes

Reaction of a variety of CCH bond-containing 1,6-enynes with N2CHSiMe3 in the presence of RuCl(COD)Cp* as catalyst precursor leads, at room temperature, to the general formation of alkenylbicyclo[3.1.0]hexanes with high Z-stereoselectivity of the alkenyl group and cis arrangement of the alkenyl group and an initial double-bond substituent, for an E-configuration of this double bond. The stereochemistry is established by determining the X-ray structures of three bicyclic products. The same reaction with 1,6-enynes bearing an R substituent on the C1 carbon of the triple bond results in either cyclopropanation of the double bond with bulky R groups (SiMe3, Ph) or formation of alkylidene-alkenyl five-membered heterocycles, resulting from a beta elimination process, with less bulky R groups (R = Me, CH2CH=CH2). The reaction can be applied to in situ desilylation in methanol and direct formation of vinylbicyclo[3.1.0]hexanes and to the formation of some alkenylbicyclo[4.1.0]heptanes from 1,7-enynes. The catalytic formation of alkenylbicyclo[3.1.0]hexanes also takes place with enynes and N2CHCO2Et or N2CHPh. The reaction can be understood to proceed by an initial [2+2] addition of the Ru=CHSiMe3 bond with the enyne CCH bond, successively leading to an alkenylruthenium-carbene and a key alkenyl bicyclic ruthenacyclobutane, which promotes the cyclopropanation, rather than metathesis, into bicyclo[3.1.0]hexanes. Density functional theory calculations performed starting from the model system Ru(HCCH)(CH2=CH2)Cl(C5H5) show that the transformation into a ruthenacyclobutane intermediate occurs with a temporary eta3-coordination of the cyclopentadienyl ligand. This step is followed by coordination of the alkenyl group, which leads to a mixed alkyl-allyl ligand. Because of the non-equivalence of the terminal allylic carbon atoms, their coupling favors cyclopropanation rather than the expected metathesis process. A direct comparison of the energy profiles with respect to those involving the Grubbs catalyst is presented, showing that cyclopropanation is favored with respect to enyne metathesis.     

Stereodefined construction of trisubstituted alkenes by direct coupling reaction of allylating agents, alkynes, and organoboranes

Tandem reaction: The Pd-catalyzed three-component coupling reaction of an allylic alcohol, terminal alkyne, and organoborane to give (E)-1-substituted 2-alkyl-1,4-pentadienes, involving geminal allylation and alkylation at the acetylenic terminal carbon, is described. Bis-diene undergoes a similar multicomponent coupling reaction with acetylene and organoborane, involving cyclization of bis-π-allylpalladium, to form trans-allyl pentadienyl cyclic and heterocyclic compounds with excellent regio- and stereoselectivities (see scheme).     

Divergent Gold(I)‐Catalyzed Skeletal Rearrangements of 1,7‐Enynes

The gold(I) complex catalyzed cycloisomerization and skeletal rearrangement of 1,n‐enynes (n=5–7) is a powerful methodology for the efficient synthesis of complex molecular architectures. In contrast to 1,6‐enynes, readily accessible homologous 1,7‐enynes are largely unexplored in such transformations. Here, the divergent skeletal rearrangement of all‐carbon 1,7‐enynes by catalysis with a cationic gold(I) complex is reported. Depending on electronic and steric factors, differently substituted 1,7‐enynes react via different carbocations formed from a common gold carbene intermediate to yield on the one hand novel exocyclic allenes and on the other hand tricyclic hexahydro‐anthracenes through a novel dehydrogenative Diels–Alder reaction.     

Cationic Pd(II)-catalyzed arylative cyclization of 1,6-enynes with arylboronic acids

A cationic Pd(II)-catalyzed redox neutral arylative cyclization of enynes by using β-acetoxy elimination as the quenching step has been developed. The reaction offers an efficient method to access a variety of carbocycles and N-heterocycles bearing an exocyclic double bond.     

Oxidative Breaking of Long-Chain Acetylenic Enol Ethers of Glycerol of the Marine Sponges Raspailia pumila and of Model Compounds with Aerial Oxygen

The raspailynes (novel long-chain enol ethers of glycerol having the enol ethers double bond conjugated in sequence, to an acetylenic and an olefinic bond, isolated from the North-East-Atlantic sponges Raspailia pumila and R. ramosa) are stable under normal hydrolytic conditions for enol ethers. In contrast, when their solutions are evaporated, these lipids such as raspailyne Bl (=(?))-3-[(1Z,5Z)-(tetradeca-1,5-dien-3-ynyl)oxy]-1,2-propanediol;(?- 2 ) rapidly react with aerial O₂ under normal laboratory-daylight conditions, with rupture of the C=C enol ether bond to give 1-O-formylglycerol ( 3 ) and an aldehyde (such as tridec-4-en-2ynal( 4 ) from (?)- 2 ). This reaction must be caused by triplet O₂, since thermally generated singlet O₂ has no effect on (?)- 2 in solution. That the mere presence of an enol-ether moiety conjugated to an acetylenic group is responsible for such a behaviour is demonstrated with the model compounds 1-methoxypentadec-1-en-3-yn-5-ol ( 6a ) and its 5-O-acetyl or 5-O-tetra-hydropyranyl derivatives 6b and 6c , respectively. Resistance to both hydroytic conditions and singlet O₂ of these compounds is thought to arise from electron depletion at the enol-ether C(beta;) atom by the acetylenic group. Plausible reaction pathways for enol-ether bond rupture in these compounds by aerial O₂ are outlined.     

Platinum- and gold-catalyzed cycloisomerization reactions of hydroxylated enynes

Exposure of enynes containing a hydroxyl group at one of the propargylic positions to catalytic amounts of either PtCl2 or (PPh3)AuCl/AgSbF6 results in a selective rearrangement with formation of bicyclo[3.1.0]hexan-3-one derivatives. The same products are obtained by a "one-pot" process on treatment of an alkynal with allylchlorodimethylsilane (4) and PtCl2 via a reaction cascade involving an initial platinum-catalyzed allylation followed by the cycloisomerization of the homoallylic alcohol formed in situ. This novel skeletal reorganization process was implemented into a concise total synthesis of the terpenes sabinone (18) and sabinol (19). Furthermore it is shown that conversion of the hydroxylated enynes into the corresponding acetates followed by reaction with a cationic gold catalyst formed from (PPh3)AuCl and AgSbF6 opens entry into isomeric products bearing the ketone function at the C-2 position of the bicyclo[3.1.0]hexane skeleton. The outcome of a deuterium labeling experiment and the analysis of the stereochemical course of the cycloisomerization reaction are consistent with the formation of cyclopropylmethyl platinum carbene species as reactive intermediates.     

Acetylenic Vinyllithiums: Consecutive Cycloisomerization-[4 + 2] Cycloaddition Reactions

Acetylenic vinyllithiums (2), which were generated from the corresponding acetylenic vinyl bromides (3) by low-temperature lithium-bromine exchange, cyclize on warming to give, following quench with water, isomerically pure conjugated bis-exocyclic 1,3-dienes (1) in good to excellent yield. Both five-membered and six-membered outer-ring dienes may be prepared: 5-exo closure of an acetylenic vinyllithium, which proceeds with total stereocontrol via syn-addition to give the E-isomer of a five-membered outer-ring diene, tolerates aryl-, silyl-, or alkyl-substituents at the distal acetylenic carbon; the corresponding 6-exo process is less facile and seems to be confined to substrates bearing an anion-stabilizing substituent, such as phenyl or trimethylsilyl, at the terminal acetylenic carbon. The highly reactive bis-exocyclic 1,3-dienes serve as precursors to polycyclic materials through subsequent Diels-Alder reaction with a wide variety of dienophiles. The consecutive exchange-cyclization-cycloaddition methodology, which can be conducted in one pot without isolation of intermediates, provides an efficient, operationally simple, and diastereoselective route to diverse polycyclic ring systems.     

Double elimination protocol for synthesis of 5,6,11,12-tetradehydrodibenzo[a,e]cyclooctene

A new method for constructing 5,6,11,12-tetradehydrodibenzo[a,e]cyclooctene is described on the basis of one-pot double elimination protocol. The target molecule, which is the smallest cyclophane with alternate arylene-ethynylene linkage, is synthesized in 61 % yield through oxidative dimerization of ortho-(phenylsulfonylmethyl)benzaldehyde. The initial carbon-carbon bond formation between sp(3) carbons followed by stepwise conversion to sp(2) and finally sp carbons bypasses the difficulty encountered in direct coupling of the sp carbon in the terminal acetylene. The mechanism of this process is discussed. The Wittig-Horner-type coupling is a key reaction employed for the carbon-carbon bond formation. Generation of (E)-vinylsulfone moiety in the first coupling between alpha-sulfonyl anion and aldehyde functions is crucial for the effective second coupling to complete the cyclization. The syn-elimination of the (E)-vinylsulfone moieties in the cyclized intermediate furnishes the acetylenic bonds.