Isolation,Identification and High-Throughput Screening of Neutral Lipid Producing Indigenous Microalgae from South African Aquatic Habitats

Exploring indigenous microalgae capable of producing significant amounts of neutral lipids through high-throughput screening is crucial for sustainable biodiesel production. In this study, 31 indigenous microalgal strains were isolated from diverse aquatic habitats in KwaZulu-Natal, South Africa. Eight superior lipid-producing strains were selected for further analysis, based on Nile red fluorescence microscopy screening. The microalgal isolates were identified to belong to the genera Chlorella, Neochloris and Chlamydomonas via morpho-taxonomic and molecular approach by 18S rRNA gene sequencing. Chlorella vulgaris PH2 had the highest specific growth rate (μ) and lowest doubling time of 0.24 day⁻¹ and 2.89 ± 0.05 day⁻¹, respectively. Chlorella vulgaris T4 had the highest biomass productivity of 35.71 ± 0.03 mg L⁻¹day⁻¹. Chlorella vulgaris PH2 had the highest lipid content of 34.28 ± 0.47 and 38 ± 9.2% (dcw) as determined by gravimetric analysis and the sulfo-phospho-vanillin (SPV) method, respectively. Chlorella vulgaris PH2 exhibited a high content of saturated fatty acids, while Chlorella sp. T4 exhibited a high total content of saturated and monounsaturated fatty acids with a low content of polyunsaturated fatty acids. The preponderance of neutral lipids suggests that Chlorella sp. T4 is a suitable candidate for biomass feedstock for biodiesel production.

     

Effects of Light Intensity on the Growth and Lipid Accumulation of Microalga <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. 11-1 Under Nitrogen Limitation

Scenedesmus spp. have been reported as potential microalgal species used for the lipid production. This study investigated the effects of light intensity (at three levels: 50, 250, and 400 μmol photons m⁻² s⁻¹) on the growth and lipid production of Scenedesmus sp. 11-1 under N-limited condition. Carotenoid to chlorophyll ratio was higher when algae 11-1 grew under 250 and 400 μmol photons m⁻² s⁻¹ than that under 50 μmol photons m⁻² s⁻¹, while protein contents was lower. Highest biomass yield (3.88 g L⁻¹), lipid content (41.1 %), and neutral lipid content (32.9 %) were achieved when algae 11-1 grew at 400 μmol photons m⁻² s⁻¹. Lipid production was slight lower at 250 μmol photons m⁻² s⁻¹ level compared to 400 μmol photons m⁻² s⁻¹. The major fatty acids in the neutral lipid of 11-1 were oleic acid (43–52 %), palmitic acid (24–27 %), and linoleic acid (7–11 %). In addition, polyunsaturated fatty acids had a positive correlation with total lipid production, and monounsaturated fatty acids had a negative one.     

Production of Lipids Containing High Levels of Docosahexaenoic Acid by a Newly Isolated Microalga, <Emphasis Type="Italic">Aurantiochytrium</Emphasis> sp. KRS101

In the present study, a novel oleaginous Thraustochytrid containing a high content of docosahexaenoic acid (DHA) was isolated from a mangrove ecosystem in Malaysia. The strain identified as an Aurantiochytrium sp. by 18S rRNA sequencing and named KRS101 used various carbon and nitrogen sources, indicating metabolic versatility. Optimal culture conditions, thus maximizing cell growth, and high levels of lipid and DHA production, were attained using glucose (60 g l⁻¹) as carbon source, corn steep solid (10 g l⁻¹) as nitrogen source, and sea salt (15 g l⁻¹). The highest biomass, lipid, and DHA production of KRS101 upon fed-batch fermentation were 50.2 g l⁻¹ (16.7 g l⁻¹ day⁻¹), 21.8 g l⁻¹ (44% DCW), and 8.8 g l⁻¹ (40% TFA), respectively. Similar values were obtained when a cheap substrate like molasses, rather than glucose, was used as the carbon source (DCW of 52.44 g l⁻¹, lipid and DHA levels of 20.2 and 8.83 g l⁻¹, respectively), indicating that production of microbial oils containing high levels of DHA can be produced economically when the novel strain is used.     

Cellulase Production by <Emphasis Type="Italic">Streptomyces viridobrunneus</Emphasis> SCPE-09 Using Lignocellulosic Biomass as Inducer Substrate

An actinomycete strain, isolated from a soil sample under a sugar cane plantation in Brazil and identified as Streptomyces viridobrunneus SCPE-09, was selected as a promising cellulolytic strain, and tested for its ability to produce cellulases from agro-industrial residues. Sugar cane bagasse or wheat bran was tested as carbon source, and corn steep liquor tested as nitrogen source. Different concentrations of carbon and nitrogen were tested using factorial design to identify optimal cellulose production. The results showed that media containing wheat bran 2.0% (w/v) and corn steep liquid 0.19% (w/v) lead to the highest production, 2.0 U mL⁻¹ of CMCase, obtained on the fifth day of fermentation. The pH and temperature profile showed optimal activity at pH 4.9 and 50°C. As for thermostability, endoglucanases were most tolerant at 50°C, retaining more than 80% of maximal activity even after 2 h of incubation. Zymogram analyses using supernatant from growth under optimized conditions revealed the presence of two CMCase bands with apparent molecular masses of 37 and 119 kDa. The combination of pH tolerance and CMCase production from agro-industrial residues by S. viridobrunneus SCPE-09 offers promise for future bioethanol biotechnologies.     

Production and Characterization of Cellobiohydrolase from a Novel Strain of <Emphasis Type="Italic">Penicillium purpurogenum</Emphasis> KJS506

A high cellobiohydrolase (CBH)-producing strain was isolated and identified as Penicillium purpurogenum KJS506 according to the morphology and comparison of internal transcribed spacer rDNA gene sequence. When rice straw and corn steep powder were used as carbon and nitrogen sources, respectively, a maximum CBH activity of 2.6 U mg-protein⁻¹, one of the highest among CBH-producing microorganisms, was obtained. The optimum temperature and pH for CBH production were 30 °C and 4.0, respectively. The increased production of CBH in P. purpurogenum culture at 30 °C was confirmed by two-dimensional electrophoresis followed by MS/MS sequencing of the partial peptide. The internal amino acid sequences of P. purpurogenum CBH showed a significant homology with hydrolases from glycoside hydrolase family 7. The extracellular CBH was purified to homogeneity by sequential chromatography of P. purpurogenum culture supernatants on a DEAE-sepharose column, a gel filtration column, and then on a Mono Q column with fast-protein liquid chromatography. The purified CBH was a monomeric protein with a molecular weight of 60 kDa and showed broad substrate specificity with maximum activity towards p-nitrophenyl β-d-cellobiopyranoside. P. purpurogenum CBH showed t _1/2 value of 4 h at 60 °C and V _max value of 11.9 μmol min⁻¹ mg-protein⁻¹ for p-nitrophenyl-d-cellobiopyranoside. Although CBHs have been reported, the high specific activity distinguishes P. purpurogenum CBH.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Isolation,Purification and Characterisation of Low Molecular Weight Xylanase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> SSP-34

Low molecular weight endo-xylanase from Bacillus pumilus SSP-34 was purified to homogeneity using ion exchange and size exclusion chromatographies. Xylanases were isolated by novel purification protocol which includes the use of anion exchange matrix such as DEAE Sepharose CL 6B with less affinity towards enzyme protein. The purified B. pumilus SSP-34 have a molecular weight of 20 kDa, with optimum pH and temperature at 6.0 and 50 °C, respectively. The enzyme was stable at 50 °C for 30 min. It showed remarkable stability at pH values ranging from 4.5 to 9 when the reaction was carried out at 50 °C. K _m and V _max values, determined with oats spelts xylan were 6.5 mg ml⁻¹ and 1,233 μmol min⁻¹ mg⁻¹ protein, respectively, and the specific activity was 1,723 U mg⁻¹     

Gene Cloning,Overexpression, and Characterization of a Xylanase from <Emphasis Type="Italic">Penicillium</Emphasis> sp. CGMCC 1669

A xylanase-encoding gene, xyn11F63, was isolated from Penicillium sp. F63 CGMCC1669 using degenerated polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL)-PCR techniques. The full-length chromosomal gene consists of 724 bp, including a 73-bp intron, and encodes a 217 amino acid polypeptide. The deduced amino acid sequence of xyn11F63 shows the highest identity of 70% to the xylanase from Penicillium sp. strain 40, which belongs to glycosyl hydrolases family 11. The gene was overexpressed in Pichia pastoris, and its activity in the culture medium reached 516 U ml⁻¹. After purification to electrophoretic homogeneity, the enzyme showed maximal activity at pH 4.5 and 40°C, was stable at acidic buffers of pH 4.5–9.0, and was resistant to proteases (proteinase K, trypsin, subtilisin A, and α-chymotrypsin). The specific activity, K _m, and V _max for oat spelt xylan substrate was 7,988 U mg⁻¹, 22.2 mg ml⁻¹, and 15,105.7 μmol min⁻¹ mg⁻¹, respectively. These properties make XYN11F63 a potential economical candidate for use in feed and food industrial applications.     

Monitoring of the <Superscript>14</Superscript>C concentration in the stack air of the nuclear power plant VVER Jaslovske Bohunice

¹⁴C releases in the stack air of the NPPs V1 and V2, Jaslovske Bohunice was determined during the year 2004–2010. Radioactivity concentration of ¹⁴C in the stack air was determined in the forms of inorganic ¹⁴CO₂ and ¹⁴C _n H _m . The annual average activity concentration in the stacks air samples varies between 12 and 121 Bq m⁻³. NPP V1, starting with 45 Bq m⁻³ in 2005 is decreasing due to the shutting down of the reactors (the first reactor was shut down in December 2006 and the second reactor in December 2008). The average value of radioactivity concentration for power unit V2 was 32 Bq m⁻³ in 2004 and reached the value of 102 Bq m⁻³ in the first-quarter of the 2010. The average normalized yearly discharge rates were between 0.39 and 0.64 TBq GW_e⁻¹ year⁻¹ (2005–2008), NPP V1 and 0.19–0.61 TBq GW_e⁻¹ year⁻¹ (2004–first-quarter 2010) for NPP V2, Jaslovske Bohunice. Most of the discharged ¹⁴C is in a hydrocarbon form, (95% for Jaslovske Bohunice NPP V2), but the CO₂ fraction may reach 37% in the air stack for Jaslovske Bohunice V1.     

An examination of the vaporization enthalpies and vapor pressures of pyrazine, pyrimidine, pyridazine, and 1,3,5-triazine

The vaporization enthalpies and liquid vapor pressures from T = 298.15 K to T = 400 K of 1,3,5-triazine, pyrazine, pyrimidine, and pyridazine using pyridines and pyrazines as standards have been measured by correlation-gas chromatography. The vaporization enthalpies of 1,3,5-triazine (38.8 ± 1.9 kJ mol⁻¹) and pyrazine (40.5 ± 1.7 kJ mol⁻¹) obtained by these correlations are in good agreement with current literature values. The value obtained for pyrimidine (41.0 ± 1.9 kJ mol⁻¹) can be compared with a literature value of 50.0 kJ mol⁻¹. Combined with the condensed phase enthalpy of formation in the literature, this results in a gas-phase enthalpy of formation, Δ_f H _m (g, 298.15 K), of 187.6 ± 2.2 kJ mol⁻¹ for pyrimidine, compared to a value of 195.1 ± 2.1 calculated for pyrazine. Vapor pressures also obtained by correlation are used to predict boiling temperatures (BT). Good agreement with experimental BT (±4.2 K) including results for pyrimidine is observed for most compounds with the exception of the pyridazines. The results suggest that compounds containing one or two nitrogen atoms in the ring are suitable standards for correlating various heterocyclic compounds provided the nitrogen atoms are isolated from each other by carbon. Pyridazines do not appear to be evaluated correctly using pyridines and pyrazines as standards.     

Preparation of <Superscript>99m</Superscript>Tc-PQQ and preliminary biological evaluation for the NMDA receptor

Pyrroloquinoline quinone (PQQ), an essential nutrient, antioxidant, redox modulator and nerve growth factor found in a class of enzymes called quinoproteins, was labeled with ^99mTc by using stannous fluoride (SnF₂) method. Radiolabeling qualification, quality control and characterization of ^99mTc-PQQ and its biodistribution studies in mice were performed and discussed. Effects of pH values, temperature, time and reducing agents concentration on the radiolabeling yield were investigated. The quality control procedure of ^99mTc-PQQ was determined by thin layer chromatography (TLC), radio high-performance liquid chromatography (RHPLC) and paper electrophoresis methods. The average radiolabeling yield was 94 ± 1% under optimum conditions of 0.99 mg of PQQ, 30 μg of SnF₂, 0.5 mg of ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) and 18.5 MBq of Na^99mTcO₄ at pH 6 and 25 °C with a response volume of 1 ± 0.1 mL. ^99mTc-PQQ was stable and anionic. Lipid–water partition coefficient of ^99mTc-PQQ was −1.49 ± 0.16. The pharmacokinetics parameters of ^99mTc-PQQ were t _1/2α = 18.16 min, t _1/2β = 100.45 min, K ₁₂ = 0.013 min⁻¹, K ₂₁ = 0.017 min⁻¹, K _e = 0.016 min⁻¹, AUC (area under the curve) = 1040.78 ID% g⁻¹ min and CL (plasma clearance) = 0.096 mL min⁻¹. The dual-exponential equation was Y = 10.88e^−0.038t  + 5.21e^−0.0069t . The biodistribution of ^99mTc-PQQ was studied in ICR (Institute for Cancer Research 7701 Burhelme Are., Fox Chase, Philadelphia, PA 1911 USA) mice. In vitro autoradiographic studies clearly showed that the ^99mTc-PQQ radioactivity accumulated predominantly in the hippocampus and cortex, which had a high density of N-methyl-d-aspartate Receptor (NMDAR). The enrichment can be blocked by NMDAR redox modulatory site antagonists-ebselen (EB) and ^99mTc-PQQ is therefore a promising candidate for the molecular imaging of NMDAR. To date, however, there have been no studies characterizing ^99mTc-PQQ.     

Production,Characterization, and Properties of Sophorolipids from the Yeast <Emphasis Type="Italic">Candida bombicola</Emphasis> using a Low-cost Fermentative Medium

The yeast Candida bombicola produces biosurfactant with properties akin to those of sophorolipid (SL) group of compounds. In the present work, the yeast was shown to produce 63.7 g l⁻¹ SL when grown on a cheap fermentative medium containing sugarcane molasses, yeast extract, urea, and soybean oil. The partially purified SL was characterized and confirmed by Fourier-transform infrared (FT-IR) spectroscopy, ¹H and ¹³C nuclear magnetic resonance (NMR) and liquid chromatography–mass spectroscopy (LC-MS) analysis. The critical micelle concentration (CMC) and minimum surface tension of the produced SL in aqueous solution were found to be 59.43 mg l⁻¹ and 34.15 m Nm⁻¹, respectively. The emulsification activity and stability with kerosene oil and organic solvents viz. xylene, benzene, and hexadecane were also tested using the produced SL, which yielded better results compared to those reported in the literature.     

Characterization of a Thermostable Family 1 Glycosyl Hydrolase Enzyme from <Emphasis Type="Italic">Putranjiva roxburghii</Emphasis> Seeds

A 66-kDa thermostable family 1 Glycosyl Hydrolase (GH1) enzyme with β-glucosidase and β-galactosidase activities was purified to homogeneity from the seeds of Putranjiva roxburghii belonging to Euphorbiaceae family. N-terminal and partial internal amino acid sequences showed significant resemblance to plant GH1 enzymes. Kinetic studies showed that enzyme hydrolyzed p-nitrophenyl β-d-glucopyranoside (pNP-Glc) with higher efficiency (K _cat/K _m = 2.27 × 10⁴ M⁻¹ s⁻¹) as compared to p-nitrophenyl β-d-galactopyranoside (pNP-Gal; K _cat/K _m = 1.15 × 10⁴ M⁻¹ s⁻¹). The optimum pH for β-galactosidase activity was 4.8 and 4.4 in citrate phosphate and acetate buffers respectively, while for β-glucosidase it was 4.6 in both buffers. The activation energy was found to be 10.6 kcal/mol in the temperature range 30–65 °C. The enzyme showed maximum activity at 65 °C with half life of ~40 min and first-order rate constant of 0.0172 min⁻¹. Far-UV CD spectra of enzyme exhibited α, β pattern at room temperature at pH 8.0. This thermostable enzyme with dual specificity and higher catalytic efficiency can be utilized for different commercial applications.     

Statistical Optimization of Recycled-Paper Enzymatic Hydrolysis for Simultaneous Saccharification and Fermentation Via Central Composite Design

A central composite design of the response surface methodology (RSM) was employed to study the effects of temperature, enzyme concentration, and stirring rate on recycled-paper enzymatic hydrolysis. Among the three variables, temperature and enzyme concentration significantly affected the conversion efficiency of substrate, whereas stirring rate was not effective. A quadratic polynomial equation was obtained for enzymatic hydrolysis by multiple regression analysis using RSM. The results of validation experiments were coincident with the predicted model. The optimum conditions for enzymatic hydrolysis were temperature, enzyme concentration, and stirring rate of 43.1 °C, 20 FPU g⁻¹ substrate, and 145 rpm, respectively. In the subsequent simultaneous saccharification and fermentation (SSF) experiment under the optimum conditions, the highest 28.7 g ethanol l⁻¹ was reached in the fed-batch SSF when 5% (w/v) substrate concentration was used initially, and another 5% added after 12 h fermentation. This ethanol output corresponded to 77.7% of the theoretical yield based on the glucose content in the raw material.     

1,3,5,7-Tetramethyl-8-(<Emphasis Type="Italic">N</Emphasis>-hydroxysuccinimidyl butyric ester)difluoroboradiaza-<Emphasis Type="Italic">s</Emphasis>-indacene as a new fluorescent labeling reagent for HPLC determination of amino acid neurotransmitters in the cerebral cortex of mice

1,3,5,7-Tetramethyl-8-(N-hydroxysuccinimidyl butyric ester)difluoroboradiaza-s-indacene (TMBB-Su), a new BODIPY-based fluorescent probe, was designed and synthesized for the labeling of amino compounds. It was used as a pre-column derivatizing reagent for determination of amino acid neurotransmitters by high-performance liquid chromatography (HPLC). The fluorescence quantum yield in acetonitrile increased from 0.84 to 0.95 when it reacted with amino acid neurotransmitters. Derivatization of TMBB-Su with seven amino acid neurotransmitters was completed within 30 min at 25 °C in 24.0 mmol L⁻¹ pH 7.8 boric acid buffer. The separation was performed on a C₁₈ column with methanol–water–buffer 55:35:10 (v/v) as mobile phase (buffer: 0.10 mol L⁻¹ H₃Cit–0.10 mol L⁻¹ NaOH). Interference from the other concomitant amino acids was eliminated successfully by means of pH gradient elution. With fluorescence detection at 494 and 504 nm for excitation and emission, respectively, the limits of detection (signal-to-noise ratio = 3) were from 2.1 to 12.0 nmol L⁻¹. The proposed method has been used to determine amino acid neurotransmitters in the cerebral cortex of mice with cerebral ischemia at the convalescence stage with satisfactory recoveries varying from 94.9 to 105.2%.     

Enhanced Production of <Emphasis Type="SmallCaps">l</Emphasis>-Arginine by Expression of <Emphasis Type="Italic">Vitreoscilla</Emphasis> Hemoglobin Using a Novel Expression System in <Emphasis Type="Italic">Corynebacterium crenatum</Emphasis>

Corynebacterium crenatum SYPA 5-5 is an aerobic and industrial l-arginine producer. It was proved that the Corynebacterium glutamicum/Escherichia coli shuttle vector pJC1 could be extended in C. crenatum efficiently when using the chloramphenicol acetyltransferase gene (cat) as a reporter under the control of promoter tac. The expression system was applied to over-express the gene vgb coding Vitreoscilla hemoglobin (VHb) to further increase the dissolved oxygen in C. crenatum. As a result, the recombinant C. crenatum containing the pJC-tac-vgb plasmid expressed VHb at a level of 3.4 nmol g⁻¹, and the oxygen uptake rates reached 0.25 mg A₅₆₂⁻¹ h⁻¹ which enhanced 38.8% compared to the wild-type strain. Thus, the final l-arginine concentration of the batch fermentation reached a high level of 35.9 g L⁻¹, and the biomass was largely increased to 6.45 g L⁻¹, which were 17.3% and 10.5% higher than those obtained by the wild-type strain, respectively. To our knowledge, this is the first report that the efficient expression system was constructed to introduce vgb gene increasing the oxygen and energy supply for l-arginine production in C. crenatum, which supplies a good strategy for the improvement of amino acid products.     

Thermochemical properties of MnNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Homogeneous manganocolumbite (MnNb₂O₆) was synthesized from Nb₂O₅ and MnO oxides. Powder sample was orthorhombic with unit cell parameters: α = 0.5766 nm, b = 1.4439 nm, c = 0.5085 nm and V = 0.4234 nm³. Heat capacity over the temperature range of 313–1253 K was measured in an inert atmosphere with combined thermogravimetry and calorimetry using NETZSCH STA 449C Jupiter thermoanalyzer. Melting point was 1767 ± 3 K, enthalpy of melting was 144 ± 4 kJ mol⁻¹. Experimental heat capacity of MnNb₂O₆ is fitted to polynomial C _pm = 221.46 + 3.03 · 10⁻³ T + −39.79 · 10⁵ T ⁻² + 40.59 · 10⁻⁶ T ².     

Pilot-Scale Experiment for Simultaneous Dioxin and NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Removal from Garbage Incinerator Emissions Using the Pulse Corona Induced Plasma Chemical Process

A pilot-scale pulse corona induced plasma chemical process (PPCP) reactor for controlling gas-phase dioxins and NO _x simultaneously is installed in a garbage incineration plant. The flow rate of the sampled flue gas is 5,000 Nm³/h (N: standard state) in maximum at the PPCP reactor, which consists of 22 wire-cylinder electrodes and is energized by a 50 kW nanosecond pulse high voltage generator. With an applied plasma energy density of 2.9–6.1 Wh/Nm³, the decomposition efficiency for dioxins is 75–84% based on TEQ (toxic equivalents); the conversion efficiency of NO to NO₂ is ~93% at maximum. The flue gas treated by the PPCP reactor is introduced at a rate of 50 Nm³/h to a wet-type chemical reactor, which uses an aqueous solution of sodium sulfite (Na₂SO₃). More than 90% of NO _x is reduced to nitrogen, with negligible byproducts such as NO₂ ⁻ or NO₃ ⁻ ions left in the solution.     

Rapid residue analysis of four triazolopyrimidine herbicides in soil, water, and wheat by ultra-performance liquid chromatography coupled to tandem mass spectrometry

A sensitive and effective method for simultaneous determination of triazolopyrimidine sulfonamide herbicide residues in soil, water, and wheat was developed using ultra-performance liquid chromatography coupled with tandem mass spectrometry. The four herbicides (pyroxsulam, flumetsulam, metosulam, and diclosulam) were cleaned up with an off-line C18 SPE cartridge and detected by tandem mass spectrometry using an electrospray ionization source in positive mode (ESI+). The determination of the target compounds was achieved in <2.0 min. The limits of detection were below 1 μg kg⁻¹, while the limits of quantification did not exceed 3 μg kg⁻¹ in different matrices. Quantitation was determined from calibration curves of standards containing 0.05–100 μg L⁻¹ with r ² > 0.997. Recovery studies were conducted at three spiked levels (0.2, 1, and 5 μg kg⁻¹ for water; 5, 10, and 100 μg kg⁻¹ for soil and wheat). The overall average recoveries for this method in water, soil, wheat plants, and seeds at three levels ranged from 75.4% to 106.0%, with relative standard deviations in the range of 2.1–12.5% (n = 5) for all analytes.