InTaO<Subscript>4</Subscript>-based nanostructures synthesized by reactive pulsed laser ablation

Nanostructured Ni-doped indium–tantalum–oxides (InTaO₄) were synthesized by a reactive pulsed laser ablation process, aiming at the final goal of direct splitting of water under visible sunbeam irradiation. The third harmonics beam of a Nd:YAG laser was focused onto a sintered In_0.9Ni_0.1TaO_4−δ target in pure oxygen background gases (0.05–1.00 Torr). Increasing the oxygen gas pressure, via thin films having nanometer-sized strong morphologies, single-crystalline nanoparticles were synthesized in the reactive vapor phases. The nanostructured deposited materials have the monoclinic layered wolframite-type structure of bulk InTaO₄, without oxygen deficiency.     

First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

PLD of Fe3O4 thin films: Influence of background gas on surface morphology and magnetic properties

Ablation of Fe₃O₄ targets has been performed using a pulsed UV laser (KrF, λ = 248 nm, 30 ns pulse duration) onto Si(100) substrates, in reactive atmospheres of O₂ and/or Ar, with different oxygen partial pressures. The as-deposited films were characterised by atomic force microscopy (AFM), X-ray diffraction (XRD), conversion electron Mössbauer spectroscopy (CEMS) and extraction magnetometry, in order to optimise the deposition conditions in the low temperature range. The results show that a background mixture of oxygen and argon improves the Fe:O ratio in the films as long as the oxygen partial pressure is maintained in the 10⁻² Pa range. Thin films of almost stoichiometric single phase polycrystalline magnetite, Fe_2.99O₄, have been obtained at 483 K and working pressure of 7.8 × 10⁻² Pa, with a high-field magnetization of ∼490 emu/cm³ and Verwey transition temperature of 112 K, close to the values reported in the literature for bulk magnetite.     

DFT study of structural, electronic and vibrational properties of pure (Al2O3)n (n = 9, 10, 12, 15) and Ni-doped (Al2O3)n (n = 9, 10) clusters

The geometrical, electronic and vibrational properties of pure (Al₂O₃)_n (n = 9, 10, 12, 15) clusters and Ni-doped (Al₂O₃)_9-10 clusters are investigated by density functional theory. There are four different Ni-doped (Al₂O₃)₉ clusters and one Ni-doped (Al₂O₃)₁₀ cluster taken into account. Compared with the pure clusters, the Ni-doped (Al₂O₃)_9-10 clusters have narrower HOMO-LUMO energy gaps. The results indicate that the impurity of Ni atom is mainly responsible for the reduction of the HOMO-LUMO energy gap. One characteristic vibration band at about 1030 cm⁻¹ is found in the vibrational frequencies of the Ni-doped (Al₂O₃)_9-10 clusters, which is caused by the asymmetric Al-O-Al stretching vibration. Another band at around 826 cm⁻¹ involving the characteristic vibration of Ni-O bond is in good agreement with experimental results.     

Studies on the origins of the absorption spectra in PbWO4 crystal

The electronic structures and absorption spectra for both the perfect PbWO₄ (PWO) crystal and the three types of PWO crystals, containing V_Pb²⁻, V_O²⁺ and a pair of V_Pb²⁻-V_O²⁺, respectively, have been calculated using CASTEP codes with the lattice structure optimized. The calculated absorption spectra indicate that the perfect PWO crystal does not occur absorption band in the visible and near-ultraviolet region. The absorption spectra of the PWO crystal containing V_Pb²⁻ exhibit seven peaks located at 1.72 eV (720 nm), 2.16 eV (570 nm), 2.81 eV (440 nm), 3.01 eV (410 nm), 3.36 eV (365 nm), 3.70 eV (335 nm) and 4.0 eV (310 nm), respectively. The absorption spectra of the PWO crystal containing V_O²⁺ occur two peaks located at 370 nm and 420 nm. The PWO crystal containing a pair of V_Pb²⁻-V_O²⁺ does not occur absorption band in the visible and near-ultraviolet region. This leads to the conclusions that the 370 and 420 nm absorption bands are related to the existence of both V_Pb²⁻ and V_O²⁺ in the PWO crystal and the other absorption bands are related to the existence of the V_Pb²⁻ in the PWO crystal. The existence of the pair of V_Pb²⁻-V_O²⁺ has no visible effects on the optical properties. The calculated polarized optical properties are well consistent with the experimental results.     

Optical characterization of PLD grown nitrogen-doped TiO2 thin films

Nitrogen-doped TiO₂ thin films were prepared by pulsed laser deposition (PLD) by ablating metallic Ti target with pulses of 248 nm wavelength in reactive atmospheres of O₂/N₂ gas mixtures. The layers were characterized by UV-VIS spectrophotometry and variable angle spectroscopic ellipsometry with complementary profilometry for measuring the thickness of the films. Band gap and extinction coefficient values are presented for films deposited at different substrate temperatures and for varied N₂ content of the gas mixture. The shown tendencies are correlated to nitrogen incorporation into the TiO_2-xN_x layers. It is shown that layers of significantly increased visible extinction coefficient with band gap energy as low as 2.89 eV can be obtained. A method is also presented how the spectroscopic ellipsometric data should be evaluated in order to result reliable band gap values.     

Synthesis and characterization of room-temperature ferromagnetism in Fe- and Ni-co-doped In2O3

Observation of room-temperature ferromagnetism in Fe- and Ni-co-doped In₂O₃ samples (In_0.9Fe_0.1−xNi_x)₂O₃ (0?x?0.1) prepared by citric acid sol-gel auto-igniting method is reported. All of the samples with intermediate x values are ferromagnetic at room-temperature. The highest saturation magnetization (0.453 μ_B/Fe+Ni ions) moment is reached in the sample with x=0.04. The highest solubility of Fe and Ni ions in the In₂O₃ lattice is around 10 and 4 at%, respectively. The 10 at% Fe-doped sample is found to be weakly ferromagnetic, while the 10 at% Ni-doped sample is paramagnetic. Extensive structure including Extended X-ray absorption fine structure (EXAFS), magnetic and magneto-transport including Hall effects studies on the samples indicate the observed ferromagnetism is intrinsic rather than from the secondary impurity phases.     

Optical polarized properties related to the oxygen vacancy in the CaMoO4 crystal

The electronic structures, dielectric functions and absorption spectra for the CaMoO₄ (CMO) crystal with and without oxygen vacancy V_O²⁺ have been calculated using the CASTEP code with the lattice structure optimized. The calculated results indicate that the optical properties of the CMO crystal show anisotropy and its optical symmetry coincides with the lattice structure geometry of the CMO crystal. The calculated absorption spectra indicate that the perfect CMO crystal does not display absorption band in the visible and near-ultraviolet range. However, in this range, the absorption spectra of the CMO crystal containing V_O²⁺ exhibit one peak at about 1.84 eV (673 nm). It predicates that the 680 nm absorption band is related to the existence of V_O²⁺ in the CMO crystal.     

(Mo + N) codoped TiO2 for enhanced visible-light photoactivity

A series of Ti_1−xMo_xO_2−yN_y samples were prepared by using sol-gel method and characterized by X-ray diffraction, transmission electron microscopy and UV-vis absorption spectroscopy. All Ti_1−xMo_xO_2−yN_y samples are anatase phase. It is found that Mo, N mono-doping can increase visible light absorption, while (Mo + N) co-doping can greatly enhance absorption in whole visible region. Results of our first-principles band structure calculations reveal that (Mo + N)-doping, especially passivated co-doping can increase the up-limit of dopant concentration and create more impurity bands in the band gap of TiO₂, which leads to a greatly increase of its visible-light absorption without a decrease of its redox potential. It reveals that (Mo + N) co-doped TiO₂ is promising for a photocatalyst with high photocalystic activity under visible light.     

Relocalization of Ce 5d electrons from host conduction band

Single crystal fibers of Ce³⁺ doped SrAl₂O₄ and CaAl₄O₇ were prepared through the laser heated pedestal growth method. Sites dependent Ce³⁺ emissions were found at 385 nm (427 nm) and 420 nm (325 nm) in SrAl₂O₄ and CaAl₄O₇ hosts, respectively. The Ce³⁺ emissions at 385 nm and 420 nm in the two hosts exhibited strong afterglows. They could persist for more than 10 h. The long persistence and sites dependence of Ce³⁺ emissions were originated from charge compensation of doping Ce³⁺ into divalent cation sites. The lifetimes of Ce³⁺ emissions in both hosts were found to depend on the laser excitation wavelengths. With 266 nm laser excitation, Ce³⁺ 5d electrons were delocalized into the host's conduction band, resulting in a prolonged decay time. The 355 nm laser excitation did not delocalize the 5d electrons and hence the measured lifetimes were the intrinsic Ce³⁺ emission lifetimes that were 17 and 35.5 ns in SrAl₂O₄ and CaAl₄O₇ hosts, respectively. The prolonged Ce³⁺ emission lifetime on 266 nm laser excitation was because of the relocalization of the 5d electrons from the host conduction band. The lifetimes of Ce³⁺ 5d electrons within the conduction band were found to be 34 and 44 ns in SrAl₂O₄ and CaAl₄O₇ hosts, respectively.     

Structural and optical properties of Ga2(1−x)In2xO3 films prepared on α-Al2O3 (0 0 0 1) by MOCVD

Ga_2(1−x)In_2xO₃ thin films with different indium content x [In/(Ga + In) atomic ratio] were prepared on α-Al₂O₃ (0 0 0 1) substrates by the metal organic chemical vapor deposition (MOCVD). The structural and optical properties of the Ga_2(1−x)In_2xO₃ films were investigated in detail. Microstructure analysis revealed that the film deposited with composition x = 0.2 was polycrystalline structure and the sample prepared with x up to 0.8 exhibited single crystalline structure of In₂O₃. The optical band gap of the films varied with increasing Ga content from 3.72 to 4.58 eV. The average transmittance for the films in the visible range was over 90%.     

Mg substitutions in ZnO-Al2O3 thin films and its effect on the optical absorption spectra of the nanocomposite

ZnO-Al₂O₃ nanocomposite thin films were prepared by sol-gel technique. The room temperature synthesis was mainly based on the successful peptization of boehmite (AlO(OH)) and Al(OH)₃ compounds, so as to use it as matrix to confine ZnO nanoparticles. The relative molar concentrations of xZnO to (1 − x) Al₂O₃ were varied as x = 0.1, 0.2 and 0.5. The optical absorption spectra of the thin films showed intense UV absorption peaks with long tails of variable absorption in the visible region of the spectra. The ZnO-Al₂O₃ nanocomposites thin films were doped with MgO by varying its molar concentrations as y = 0.05, 0.75, 0.1, 0.125, 0.15 and 0.2 with respect to the ZnO present in the composite. The MgO doped thin films showed suppression of the intense absorption peaks that was previously attained for undoped samples. The disappearance of the absorption peaks was analyzed in terms of the crystalline features and lattice defects in the nanocomposite system. The bulk absorption edge, which is reportedly found at 3.37 eV, was shifted to 5.44 eV (for y = 0.05), 5.63 eV (for y = 0.075) and maximum to 5.77 eV (for y = 0.1). In contrast, beyond the concentration, y = 0.1 the absorption edges were moved to 5.67 eV (for y = 0.125), 5.61 eV (for y = 0.15) and to 5.49 eV (for y = 0.2). This trend was explained in terms of the Burstein-Moss shift of the absorption edges.     

Electrical properties and emission mechanisms of Zn-doped β-Ga2O3 films

We study the electrical properties and emission mechanisms of Zn-doped β-Ga₂O₃ film grown by pulsed laser deposition through Hall effect and cathodoluminescence which consist of ultraviolet luminescence (UV), blue luminescence (BL) and green luminescence (GL) bands. The Hall effect measurements indicate that the carrier concentration increases from 7.16×10¹¹ to 6.35×10¹² cm⁻³ with increasing a nominal Zn content from 3 to 7 at%. The UV band at 272 nm is not attributed to Zn dopants and ascribed as radiative electron transition from conduction band to a self-trapped hole while the BL band is attributable to defect level related to Zn dopant. The BL band has two emission peaks at 415 and 455 nm, which are ascribed to the radiative electron transition from oxygen vacancy (V_O) to valence band and recombination of a donor–acceptor pair (DAP) between V_O donor and Zn on Ga site (Zn_Ga) acceptor, respectively. The GL band is attributed to the phonon replicas’ emission of the DAP. The acceptor level of Zn_Ga is estimated to be 0.26 eV above the valence band maximum. The transmittance and absorption spectra prove that the Zn-doped β-Ga₂O₃ film is a dominantly direct bandgap material. The results of Hall and cathodoluminescence measurements imply that the Zn dopant in β-Ga₂O₃ film will form an acceptor Zn_Ga to produce p-type conductivity.     

Study of structural and optical properties of ZnO films grown by pulsed laser deposition

Wurtzite zinc oxides films (ZnO) were deposited on silicon (0 0 1) and corning glass substrates using the pulsed laser deposition technique. The laser fluence, target-substrate distance, substrate temperature of 300 °C were fixed while varying oxygen pressures from 2 to 500 Pa were used. It is observed that the structural properties of ZnO films depend strongly on the oxygen pressure and the substrate nature. The film crystallinity improves with decreasing oxygen pressure. At high oxygen pressure, the films are randomly oriented, whereas, at low oxygen pressures they are well oriented along [0 0 1] axis for Si substrates and along [1 0 3] axis for glass substrates. A honeycomb structure is obtained at low oxygen pressures, whereas microcrystalline structures were obtained at high oxygen pressures. The effect of oxygen pressure on film transparency, band gap E_g and Urbach energies was investigated.     

Photocatalytic O2 evolution performances of Cd1+xIn2−2xSnxO4 (x=0.1, 0.3, 0.5, 0.7, 1.0) conducting oxides

The conducting oxides solid solutions of Cd_1+xIn_2−2xSn_xO₄ (x=0.1, 0.3, 0.5, 0.7, 1.0) were prepared via a solid state reaction method. The band gaps were estimated to be 2.4 eV for x=1.0, 2.5 eV for x=0.7, 2.6 eV for x=0.5, 2.7 eV for x=0.3 and 2.8 eV for x=0.1. Oxygen could be evolved over Cd₂SnO₄ under the irradiation of Xe-lamp or even visible light (λ>420 nm), while the others could only work in the UV-light range. Raman showed the cation distribution in Cd₂SnO₄ is ordered, while that in the others is disordered. The cations distribution was proposed to be the cause of the difference in photocatalytic O₂-evolution activities.     

On the synthesis and optical absorption studies of nano-size magnesium oxide powder

Magnesium oxide (MgO) nano-size powder is synthesized using magnesium nitrate hexahydrate and oxalic acid as precursors with ethanol as a solvent. The process involves gel formation, drying at 100 °C for 24 h to form magnesium oxalate dihydrate [α-MgC₂O₄·2H₂O] and its decomposition at 500, 600, 800, and 1000 °C for 2 h to yield MgO powder (average crystallite size ∼6.5-73.5 nm). The sol-gel products at various stages of synthesis are characterized for their thermal behaviour, phase, microstructure, optical absorption, and presence of hydroxyl and other groups like OCO, CO, C-C, etc. MgO powder is shown to possess an f.c.c. (NaCl-type) structure with lattice parameter increasing with decrease in crystallite size (t_av); typical value being ∼4.222(2) Å for t_av∼6.5 nm as against the bulk value of 4.211 Å. Infrared absorption has shown MgO to be highly reactive with water. Also, a variety of F- and M-defect centres found in MgO produce energy levels within the band gap (7.8 eV), which make it attractive for application in plasma displays for increasing secondary electron emission and reducing flickering effects. The possible application of the intermediate sol-gel products, viz., α-MgC₂O₄·2H₂O and anhydrous magnesium oxalate (MgC₂O₄) in understanding the plants and ESR dosimetry, respectively, has also been suggested.     

Pulsed laser deposition and thermal characterization of Ni-doped La5Ca9Cu24O41 thin films

Highly b-axis oriented polycrystalline Ni-doped La₅Ca₉Cu₂₄O₄₁ thin films have been grown on (0 0 1) SrTiO₃ substrates using the pulsed laser deposition technique. EDX measurements have revealed nearly stoichiometric target-to-film transfer of Ni concentration up to 6.6 at.%. The 3ω method has been employed to carry out thermal conductivity measurements in the range 90-300 K. The results indicate that the out-of-plane thermal conductivity (κ_b) decreases with increasing Ni doping level. The temperature dependence of κ_b observed in pristine and Ni-doped films is similar to that observed in polycrystalline pellets indicating that the grain boundaries play a significant role in the heat transport.     

Direct measurement of the Rayleigh scattering cross section in various gases

Using the laser-based technique of cavity ring-down spectroscopy extinction measurements have been performed in various gases straightforwardly resulting in cross sections for Rayleigh scattering. For Ar and N₂ measurements are performed in the range 470-490 nm, while for CO₂ cross sections are determined in the wider range 470-570 nm. In addition to these gases also for N₂O, CH₄, CO, and SF₆ the scattering cross section is determined at 532 nm, a wavelength of importance for lidar applications and combustion laser diagnostics. In O₂ the cross section at 532 nm is found to depend on pressure due to collision-induced light absorption. The obtained cross sections validate the cross sections for Rayleigh scattering as derived from refractive indices and depolarization ratios through Rayleigh's theory at the few %-level, although somewhat larger discrepancies are found for CO, N₂O and CH₄.     

Chemical spray pyrolysis deposition and characterization of p-type CuCr1−xMgxO2 transparent oxide semiconductor thin films

A chemical spray pyrolysis technique for deposition of p-type Mg-doped CuCrO₂ transparent oxide semiconductor thin films using metaloorganic precursors is described. As-deposited films contain mixed spinel CuCr₂O₄ and delafossite CuCrO₂ structural phases. Reduction in spinel CuCr₂O₄ fraction and formation of highly crystalline films with single phase delafossite CuCrO₂ structure is realized by annealing at temperatures ?700 °C in argon. A mechanism of synthesis of CuCrO₂ films involving precursor decomposition, oxidation and reaction between constituent oxides in the spray deposition process is presented. Post-annealed CuCr_0.93Mg_0.07O₂ thin films show high (?80%) visible transmittance and sharp absorption at band gap energy with direct and indirect optical band gaps 3.11 and 2.58 eV, respectively. Lower (∼450 °C) substrate temperature formed films are amorphous and yield lower direct (2.96 eV) and indirect (2.23 eV) band gaps after crystallization. Electrical conductivity of CuCr_0.93 Mg_0.07O₂ thin films ranged 0.6-1 S cm⁻¹ and hole concentration ∼2×10¹⁹ cm⁻³ determined from Seebeck analysis. Temperature dependence of conductivity exhibit activation energies ∼0.11 eV in 300-470 K and ∼0.23 eV in ?470 K region ascribed to activated conduction and grain boundary trap assisted conduction, respectively. Heterojunction diodes of the structure Au/n-(ZnO)/p-(CuCr_0.93Mg_0.07O₂)/SnO₂ (TCO) were fabricated which show potential for transparent wide band gap junction device.     

Third order optical nonlinearities in ZnFe2O4 nanocrystals

Using Z-scan method with picosecond laser at 532 nm, the third order optical nonlinearities of ZnFe₂O₄ were investigated. The nonlinear refractive index is positive for all ZnFe₂O₄ samples and decrease with the nanocrystal size. The nonlinear absorption dominated by saturable absorption for 19 nm and 11 nm ZnFe₂O₄ but by two photon absorption for 5 nm ZnFe₂O₄ organosol. Origin of the optical nonlinearities and the size effect has been discussed.