Properties of ZnO thin films grown on Si substrates by photo-assisted MOCVD

ZnO thin films were grown on (1 0 0) p-Si substrates by Photo-assisted Metal Organic Chemical Vapor Deposition (PA-MOCVD) using diethylzinc (DEZn) and O₂ as source materials and tungsten-halogen lamp as a light source. The effects of tungsten-halogen lamp irradiation on the surface morphology, structural and optical properties of the deposited ZnO films have been investigated by means of atomic force microscope (AFM), X-ray diffraction and photoluminescence (PL) spectra measurements. Compared with the samples without irradiation, the several characteristics of ZnO films with irradiation are improved, including an improvement in the crystallinity of c-axis orientation, an increase in the grain size and an improvement in optical quality of ZnO films. These results indicated that light irradiation played an important role in the growth of ZnO films by PA-MOCVD.     

Influence of annealing atmosphere on ZnO thin films grown by MOCVD

ZnO films were deposited on c-plane sapphire substrates by metal-organic chemical vapor deposition (MOCVD). Annealing treatments for as-deposited samples were performed in different atmosphere under various pressures in the same chamber just after growth. The effect of annealing atmosphere on the electrical, structural, and optical properties of the deposited films has been investigated by means of X-ray diffraction (XRD), atomic force microscope (AFM), Hall effect, and optical absorption measurements. The results indicated that the electrical and structural properties of the films were highly influenced by annealing atmosphere, which was more pronounced for the films annealed in oxygen ambient. The most significant improvements for structural and electrical properties were obtained for the film annealed in oxygen under the pressure of 60 Pa. Under the optimum annealing condition, the lowest resistivity of 0.28 Ω cm and the highest mobility of 19.6 cm² v⁻¹ s⁻¹ were obtained. Meanwhile, the absorbance spectra turned steeper and the optical band gap red shifted back to the single-crystal value.     

Room temperature electroluminescence from ZnO/Si heterojunction devices grown by metal-organic chemical vapor deposition

Heterojunction light-emitting diodes with ZnO/Si structure were fabricated on both high-resistivity (p) and low-resistivity (p⁺) Si substrates by metal-organic chemical vapor deposition technology. Fairly good rectifications were observed from the current-voltage curves of both heterojunctions. Ultraviolet (UV) and blue-white electroluminescence (EL) from ZnO layer were observed only from ZnO/p⁺-Si heterojunction under forward bias at room temperature (RT), while strong infrared (IR) EL emissions from Si substrates were detected from both ZnO/p-Si and ZnO/p⁺-Si heterojunctions. The UV and IR EL mechanisms have been explained by energy band structures. The realization of RT EL in UV-visible and IR region on Si substrate has great applicable potential for Si-based optoelectronic integrated circuits.     

Band-edge photoluminescence in nanocrystalline ZnO:In films prepared by electrostatic spray deposition

ZnO:In films are successfully prepared by using the electrostatic spray deposition technique. X-ray diffraction indicates that the ZnO:In films have a polycrystalline hexagonal wurtzite structure with lattice parameters a=3.267 Å and c=5.209 Å. Photoluminescence properties of the films are investigated in the temperature range of 11.6-300 K, showing strong luminescence in the whole range of temperature. The temperature dependence of the photoluminescence are carried out with full profile fitting of spectra, which clearly shows that the ultraviolet (UV) emission in In-doped ZnO films at low temperature are attributed to emission of a neutral donor-bound exciton (D^°X) and recombination of donor-acceptor pairs (DAP), while the UV emission at room temperature originates from radiative transition of an electron bound on a donor to the valence band.     

Properties of ZnO thin films grown on Si substrates in vacuum and oxygen ambient by pulsed laser deposition

Epitaxial ZnO thin films have been synthesized directly on Si(1 1 1) substrates by pulsed laser deposition (PLD) in vacuum. The reflection high-energy electron diffraction (RHEED) indicates that streaky patterns can be clearly observed from the ZnO epilayers prepared at 600 and 650 °C, revealing a two-dimensional (2D) growth mode. While the ZnO thin film deposited in oxygen ambient shows ring RHEED pattern. There is a compressive in-plane stress existing in the ZnO epitaxial film, but a tensile one in the polycrystalline film. Compared with the ZnO epilayer, the ZnO polycrystalline film shows more intense ultraviolet emission (UVE) with a small full width at half maximum (FWHM) of 89 meV. It is suggested that the atomically flat epilayers may be powerfully used as transitive stratums to grow high-quality ZnO films suitable for the fabrication of optoelectronic devices.     

Growth and Characterization of Trumpet-Shaped ZnO Microtube Arrays on Si Substrates

Aligned trumpet-shaped zinc oxide microtube arrays have been successfully prepared on silicon （100） substrates via the chemical vapour deposition method with a mixture of ZnO and active carbon powders as reactants. The results show that two types of trumpet-shaped ZnO microtubes can be obtained. A plausible growth mechanism based on the studies of scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, x-ray diffraction （XRD）, and room-temperature photoluminescence spectroscopy is proposed and discussed. The initial metastable zinc-rich ZnOx embryos play a key role in the formation of trumpet-shaped ZnO microtubes. On the different surfaces of metastable zinc-rich ZnOx （x 〈 1）, embryos exhibit different stabilities and resistivities to oxidation; these tiny embryos are gradually extended with different growing rates along the directions of its long axis and circular boundary around its oxide shell. Just this special reason creates the formation of trumpet-shaped microtubes and results in the inerratic and imperfect hexagonshaped cross section that appears. Moreover, the analytical results also show that the as-synthesized ZnO microtube arrays can exhibit better room-temperature photoluminescence behaviour.     

ZnO Nanostructures Grown on A1N/Sapphire Substrates by MOCVD

ZnO nanorods and nanotubes are successful synthesized on A1N/sapphire substrates by metal-organic chemical vapour deposition （MOGVD）. The different morphology and structure properties of ZnO nanorods and nanotubes are found to be affected by the A1N under-layer. The photoluminescence spectra show the optical properties of the ZnO nanorods and nanotubes, in which a blueshift of UV emission is observed and is attributed to the surface effect.[第一段]     

Enhanced radiation hardness of ZnO nanorods versus bulk layers

It is shown that ZnO nanorods grown by MOCVD exhibit enhanced radiation hardness against high energy heavy ion irradiation as compared to bulk layers. The decrease of the luminescence intensity induced by 130 MeV Xe⁺²³ irradiation at a dose of 1.5 × 10¹⁴ cm^–2 in ZnO nanorods is nearly identical to that induced by a dose of 6 × 10¹² cm^–2 in bulk layers. The change in the nature of electronic transitions responsible for luminescence occurs at an irradiation dose around 1 × 10¹⁴ cm^–2 and 5 × 10¹² cm^–2 in nanorods and bulk layers, respectively. High energy heavy ion irradiation followed by thermal annealing is also effective on the quality of ZnO nanorods grown by electrodeposition. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photoluminescence and X-Ray Photoelectron Spectroscopy of p-Type Phosphorus-Doped ZnO Films Prepared by MOCVD

Reproducible p-type phosphorus-doped ZnO （p-ZnO：P） films are prepared on semi-insulating InP substrates by metal-organic chemical vapour deposition technology. The electrical properties of these films show a hole concentration of 9.02 × 10^17 cm ^-3, a mobifity of 1.05 cm^2 /Vs, and a resistivity of 6.6 Ω.cm. Obvious acceptorbound-exciton-related emission and P-induced zinc vacancy （Vzn） emission are observed by low-temperature photoluminescence spectra of the films, and the acceptor binding energy is estimated to be about 125meV. The local chemical bonding environments of the phosphorus atoms in the ZnO are also identified by x-ray photoelectron spectra. Our results show direct experimental evidence that Pzn-2Vzn shallow acceptor complex most likely contributes to the p-type conductivity of ZnO：P films.     

Photoluminescence properties of nitrogen-doped ZnO films deposited on ZnO single crystal substrates by the plasma-assisted reactive evaporation method

Photoluminescence (PL) spectra of nitrogen-doped ZnO films (ZnO:N films) grown epitaxially on n-type ZnO single crystal substrates by using the plasma-assisted reactive evaporation method were measured at 5 K. In PL spectra, free exciton emission at about 3.375 eV was very strong and emissions at 3.334 and 3.31 eV were observed. These two emissions are discussed in this paper. The nitrogen concentration in ZnO:N films measured by secondary ion mass spectroscopy was 10^19-20 cm⁻³. Current-voltage characteristics of the junction consisting of an n-type ZnO single crystal substrate and ZnO:N film showed good rectification. Also, ultraviolet radiation and visible light were emitted from this junction under a forward bias at room temperature. It is therefore thought that ZnO:N films have good crystallinity and that doped nitrogen atoms play a role as acceptors in ZnO:N films to form a good pn junction. From these phenomena and the excitation intensity dependency of PL spectra, emissions at 3.334 and 3.31 eV were assigned to neutral acceptor-bound exciton (A⁰X) emission and a donor-acceptor pair (DAP) emission due to doped nitrogen, respectively.     

ZnO nanowall networks grown on DiMPLA pre‐patterned thin gold films

ZnO nanowall networks grown by a high pressure pulsed laser deposition (PLD) technique on a pre‐patterned thin gold film are presented. The thin gold film on a c ‐plane oriented sapphire substrate was structured with diffraction mask projection laser ablation (DiMPLA). It is shown that only areas processed with the laser patterning technique reveal homogeneous growth of ZnO nanowall networks. Photoluminescence measurements prove the higher material quality of the pre‐patterned regions compared to the untreated ones. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Homoepitaxy of ZnO by pulsed‐laser deposition

ZnO thin films were grown homoepitaxially on O‐face ZnO single crystals by pulsed‐laser deposition. The ZnO substrates grown by the hydrothermal method were heat‐treated in oxygen ambient at 1000 °C for 2 h prior to deposition. After the thermal treatment the substrates show bilayer steps between 200–400 nm wide terraces and a considerably improved crystalline structure. Thin film surfaces exhibit closed loop spirals and show steps of c /2 or c. The FWHM of the (0002) rocking curve of the best sample is 29″. Similar to the substrates used, Al is contained in the thin films (<10¹⁴ cm^–3) as photoluminescence (PL) and thermal admittance spectroscopy suggest. However, deep levels between 200 and 400 meV below the conduction band are the dominant donors at room temperature. Low temperature PL is dominated by (Al⁰,X) (I6, FWHM: 200 µeV) and extremely homogeneous (σ ≈ 1%).

     

Influence of CH3COO on the room temperature photoluminescence of ZnO films prepared by CVD

ZnO films with strong c-axis-preferred orientation have been prepared by a single source chemical vapor deposition technique using zinc acetate as source material at the growth temperature of 230 °C. The strong UV and blue emissions were observed in the photoluminescence spectra of as-grown films. A small quantity of residual zinc acetate was reserved on the surface of as-grown ZnO films and the emission mechanism of blue luminescence was nearly related to the CH₃COO^- of unidentate type. The blue emission disappeared and the green emission appeared after annealing treatment. The green emission is related to the singly ionized oxygen vacancies.     

Effects of sapphire substrate annealing on ZnO epitaxial films grown by MOCVD

The annealing effects of sapphire substrate on the quality of epitaxial ZnO films grown by metalorganic chemical vapor deposition (MOCVD) were studied. The atomic steps formed on (0 0 0 1) sapphire (α-Al₂O₃) substrate surface by annealing at high temperature was analyzed by atomic force microscopy (AFM). The annealing effects of sapphire substrate on the ZnO films were examined by X-ray diffraction (XRD), AFM and photoluminescence (PL) measurements. Experimental results indicate that the film quality is strongly affected by annealing treatment of the sapphire substrate surface. The optimum annealing temperature of sapphire substrates is given.     

Porous ZnO nanobelts evolved from layered basic zinc acetate nanobelts

Novel porous ZnO nanobelts were successfully synthesized by heating layered basic zinc acetate (LBZA) nanobelts in the air. The precursor of LBZA nanobelts consisted of a lamellar structure with two interlayer distances of 1.325 and 0.99 nm were prepared using a low-temperature, solution-based method. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and infrared spectroscopy are used to characterize the as-products. PL measurements show that the porous ZnO nanobelts have strong ultraviolet emission properties at 380 nm, while no defect-related visible emission is detected. The good performance for photoluminescence emission makes the porous ZnO nanobelts promising candidates for photonic and electronic device applications.     

Effect of sputtered films on morphology of vertical aligned ZnO nanowires

Vertical aligned ZnO nanowires were grown by MOCVD technique on silicon substrate using ZnO and AlN thin films as seed layers. The shape of nanostructures was greatly influenced by the under laying surface. Vertical nanopencils were observed on ZnO/Si, whereas the nanowires on both sapphire and AlN/Si substrate have the similar aspect ratio. XRD patterns suggest that the nanostructures have good crystallinity. High-resolution transmission electron microscopy (HRTEM) confirmed the single crystalline growth of the ZnO nanowires along [0 0 1] direction. Room-temperature photoluminescence (PL) spectra of ZnO nanowires on AlN/Si clearly show a band-edge luminescence accompanied with a visible emission. More interestingly, no visible emission for the nanopencils on ZnO/Si substrates, were observed.     

Structure and properties of ZnO films grown on Si substrates with low temperature buffer layers

Zinc oxide (ZnO) thin films were grown on Si (1 0 0) substrates by pulsed laser deposition (PLD) using two-step epitaxial growth method. Low temperature buffer layer (LTBL) was initially deposited in order to obtain high quality ZnO thin film; the as-deposited films were then annealed in air at 700 °C. The effects of LTBL and annealing treatment on the structural and luminescent properties of ZnO thin film were investigated. It was found that tensile strain was remarkably relaxed by employing LTBL and the band-gap redshifted, correspondingly. The shift value was larger than that calculated from band-gap theories. After annealing treatment, it was found that the annealing temperature with 700 °C has little influence on strains of ZnO films with LTBLs other than directly deposited film in our experiments. Interestingly, the different behaviors in terms of the shift of ultraviolet (UV) emission after annealing between films with and without buffer were observed, and a tentative explanation was given in this paper.     

ZnO thin films on Si(1 1 1) grown by pulsed laser deposition from metallic Zn target

ZnO thin films with highly c-axis orientation have been fabricated on p-type Si(1 1 1) substrates at 400 °C by pulsed laser deposition (PLD) from a metallic Zn target with oxygen pressures between 0.1 and 0.7 mbar. Experimental results indicate that the films deposited at 0.3 and 0.5 mbar have better crystalline and optical quality and flatter surfaces than the films prepared at other pressures. The full width at half maximum (FWHM) of (0 0 0 2) diffraction peak decreases remarkably from 0.46 to 0.19° with increasing annealing temperature for the film prepared at 0.3 mbar. In photoluminescence (PL) spectra at room temperature, the annealed film at 700 °C exhibits a smaller ultraviolet (UV) peak FWHM of 108 meV than the as-grown film (119 meV). However, an enhanced deep-level emission is observed. Possible origins to above results are discussed.     

Enhanced Field Emission from Vertical ZnO Nanoneedles on Micropyramids

Vertical ZnO nanoneedles with sharp tips are secondarily grown on tips of primarily grown ZnO micropyramids by a vapour transport process. The field emission （FE） properties exhibit a lower turn-on electric field and a higher field enhancement factor as compared with vertical ZnO microrods. This result indicates that ZnO nanoneedles have good optimum shapes for FE due to electron accumulation at sharp tips.     

Characterization of CdTe films with in situ CdCl2 treatment grown by a simple vapor phase deposition technique

A unique vapor phase deposition (VPD) technique was designed and built to achieve in situ CdCl₂ treatment of CdTe film. The substrate temperature was 400 °C, and the temperature of CdTe mixture with CdCl₂ source was 500 °C. The structural and morphological properties of CdTe have been studied as a function of wt.% CdCl₂ concentration by using X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). XRD measurements show that the presence of CdCl₂ vapor induces (1 1 1)-oriented growth in the CdTe film. SEM measurements have shown enhance growth of grains, in the presence of CdCl₂. From AFM the roughness of the films showed a heavy dependence on CdCl₂ concentration. In the presence of 4% CdCl₂ concentration, the CdTe films roughness has a root mean square (rms) value of about 275 Å. This value is about 831 Å for the non-treated CdTe films.