Structural studies and ionic conductivity of lithium iodide-lithium tungstate solid electrolytes

Solid mixtures of calcined lithium iodide - lithium tungstate (LiI -Li₂WO₄) have been found to be potential solid electrolytes for practical applications with high conductivities of about 10⁻³ S·cm⁻¹ at room temperature. The highest ionic conductivity was recorded for the sample containing 20 wt.-% of lithium iodide. The ionic conductivity was related to the structure of the material using X-ray diffraction (XRD) and infrared techniques (FTIR). These experiments confirm the evidence of interaction between LiI and Li₂WO₄. FTIR spectroscopy revealed the existence of a band at 1505 cm⁻¹ which is formed as a result of this LiI -Li₂WO₄ interaction. The new phase acts as a conducting pathway for the ions to migrate through the material. Lithium ionic conduction was confirmed by measuring the transference number by Wagner's polarization technique. The ionic transference number of this solid electrolyte was found to be 1 within the limits of error.     

Preparation and characterization of the polymer electrolyte system ENR50/PVC/EC/PC/LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> for electrochemical device applications

Polymer electrolytes containing epoxidised natural rubber (ENR50)/poly(vinyl chloride) (PVC) blend as a polymer host, a solvent mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and lithium imide, LiN (CF₃SO₂)₂, as a salt were studied. Polymer electrolytes that were obtained by solvent cast yielded solid dry rubbery films with a thickness range of 110–125 μm. Impedance spectroscopy, Fourier transform infra red (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were performed on these samples. The prepared solid polymer electrolytes exhibit ionic conductivities in the order 10⁻⁴ S cm⁻¹ at room temperature as expected. However, the physical properties of the electrolytes have improved significantly when optimal composition has been selected. Paper presented at the International Conference on Solid State Science and Technology 2006, Kuala Terengganu, Malaysia, Sept. 4–6, 2006.     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

Mixed conductive electrode materials for sensors and SOFC

Modified active electrode materials based upon rare earth manganites were developed for different solid electrolyte electrochemical cells. The preparation, structure, thermal expansion, the state of oxygen on the surface, the electronic and ionic conductivity of the perovskites Ln_1−xCa(Sr)_xMn_1−y(Co, Ni)_yO_3−δ with various compositions and electrode kinetics on the manganite electrode/solid electrolyte interfaces were investigated. The value of the bulk conductivity was larger than 150 S/cm (at 1100 K) and increased significantly with increasing contents of Ni or Co. The thermal expansion coefficients of rare earth manganites were close to those of ZrO₂ based solid electrolytes. The expansion coefficients of Co or Ni subsituted lanthanum manganites increase with Co or Ni substitution and are over 12•10⁻⁶K⁻¹. The ionic conductivities were determined using encapsulated zirconia microelectrodes based on a Hebb-Wagner analysis of the currentvoltage curves. The relatively high oxide ion conductivity of 10⁻⁵ S/cm at 900...1000 K was found by Ni or Co doped manganites. Studies of the electrode kinetics using complex impedance spectroscopy show that Co and Ni doped manganites have advantages if used as electrodes as compared with these for noble metals. Paper presented at the 1st Euroconference on Solid State Ionics, Zakynthos, Greece, 11–18 Sept. 1994     

Effect of lithium salt concentration in PVAc/PMMA-based gel polymer electrolytes

Hybrid solid polymer electrolyte films comprising of poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), LiClO₄, and propylene carbonate are prepared by solution casting technique by varying the salt concentration. In this study, PVAc/PMMA polymer blend ratio is fixed as 25:75 on the basis of conductivity and mechanical stability of the film. X-ray diffraction, Fourier transform infrared impedance, thermogravimetry/differential thermal analysis and scanning electron microscopy studies are carried out for the polymer electrolytes. The maximum ionic conductivity is found to be 4.511 × 10⁻⁴ S cm⁻¹ at 303 K for the plasticized polymer electrolyte with 8 wt.% of LiClO₄. The ionic conductivity is found to decrease with an increase of LiClO₄ concentration.     

Effects of gamma radiation treatment and plasticizer on alkaline solid polymer electrolytes

Alkaline solid polymer electrolyte films have been prepared by the solvent-casting method. Gamma radiation treatment and propylene carbonate plastisizer were used to improve the ionic conductivity of the electrolytes at ambient temperature. The structure of the irradiated electrolytes changes from semi-crystalline to amorphous, indicating that the crosslinking of the polymer has been achieved at a dose of 200 kGy. The ionic conductivity at room temperature of PVA/KOH blend increases from 10⁻⁷ to 10⁻³ Scm⁻¹ after the PVA crosslinking and when the plasticizer concentration was increased from 20 to 30%. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes

An attempt has been made in the present work to combine gel and composite polymer electrolyte routes together to form a composite polymeric gel electrolyte that is expected to possess high ionic conductivity with good mechanical integrity. Polyethylene glycol (PEG) based composite gel electrolytes using polyvinyl alcohol (PVA) as guest polymer have been synthesized with 1 molar solution of ammonium thiocyanate (NH₄SCN) in dimethyl sulphoxide (DMSO) and electrically characterized. The ionic conductivity measurements indicate that PEG:PVA:NH₄SCN-based composite gel electrolytes are superior (σ _max = 5.7 × 10⁻² S cm⁻¹) to pristine electrolytes (PEG:NH₄SCN system) and conductivity variation with filler concentration remains within an order of magnitude. The observed conductivity maxima have been correlated to PEG:PVA:NH₄SCN-and PVA:NH₄SCN-type complexes. Temperature dependence of conductivity profiles exhibits Arrhenius behaviour in low temperature regime followed by VTF character at higher temperature.      

R & D for intermediate temperature solid state fuel cells

Although some solid oxide fuel cells (SOFCs) are in the process of ommercialization, this technology still faces serious technical challenge due to the special high temperature (1000 °C) requirement resulting in high costs as well. It has thus been a strong tendency to develop intermediate temperature (400 to 800 °C) solid state fuel cells (ITSSFCs). ITSSFCs use either oxide ionic conductors, e.g. fluorite or perovskite oxides or proton conducting oxyacid salts and salt-oxide composites as electrolytes that have a high protonic or oxide ionic conductivity of 10⁻² to 10⁻¹ S/cm in the IT region. The ITSSFCs may provide new opportunities for SSFC (including SOFC) commercialization. This paper gives a brief overview of the current ITSSFC status and activities of research and development mainly based on our work. Paper presented at the 97th Xiangshan Science Conference on New Solid State Fuel Cells, Xiangshan, Beijing, China, June 14–17, 1998.     

Preparation and characterizations of PVAc/P(VdF-HFP)-based polymer blend electrolytes

A novel group of polymer blend electrolytes based on the mixture of poly(vinyl acetate) (PVAc), poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), and the lithium salt (LiClO₄) are prepared by solvent casting technique. Ionic conductivity of the polymer blend electrolytes has been investigated by varying the PVAc and PVdF-HFP content in the polymer matrix. The maximum ionic conductivity has been obtained as 0.527 × 10⁻⁴ Scm⁻¹ at 303 K for PVAc/PVdF-HFP ((25/75) wt.%)/LiClO₄ (8 wt.%). The complex formations ascertained from XRD and FTIR spectroscopic techniques and the thermal behavior of the prepared samples has been performed by DSC analysis. The surface morphology and the surface roughness are studied using SEM and AFM scanning techniques respectively.     

A novel PEO-based composite polymer electrolyte with NaAlOSiO molecular sieves powders

Ion-conducting thin film polymer electrolytes based on poly(ethylene oxide) (PEO) complexes with NaAlOSiO molecular sieves powders has been prepared by solution casting technique. X-ray diffraction, scanning electron microscopy, differential scanning calorimeter, and alternating current impedance techniques are employed to investigate the effect of NaAlOSiO molecular sieves on the crystallization mechanism of PEO in composite polymer electrolyte. The experimental results show that NaAlOSiO powders have great influence on the growth stage of PEO spherulites. PEO crystallization decrease and the amorphous region that the lithium-ion transport is expanded by adding appropriate NaAlOSiO, which leads to drastic enhancement in the ionic conductivity of the (PEO)₁₆LiClO₄ electrolyte. The ionic conductivity of (PEO)₁₆LiClO₄-12 wt.% NaAlOSiO achieves (2.370 ± 0.082) × 10⁻⁴ S · cm⁻¹ at room temperature (18 °C). Without NaAlOSiO, the ionic conductivity has only (8.382 ± 0.927) × 10⁻⁶ S · cm⁻¹, enhancing 2 orders of magnitude. Compared with inorganic oxide as filler, the addition of NaAlOSiO molecular sieves powders can disperse homogeneously in the electrolyte matrix without forming any crystal phase and the growth stage of PEO spherulites can be hindered more effectively.     

Ionic conductivity studies in PMMA/PVdF polymer blend electrolyte with lithium salts

Batteries using ionically conducting polymer membranes as electrolytes are very attractive, since the concept of power sources capable of combining a high energy content with plasticity is very appealing for the consumer electronics market and in electric vehicle applications. Blend based polymer electrolytes composed of poly (methylmethacrylate) (PMMA), Poly Vinylidene fluoride (PVdF), Lithium salt (LiX) (X=ClO₄, BF₄ and CF₃SO₃) and Dimethyl Phthalate (DMP) are prepared using solvent casting technique. The films have been characterized using XRD, FTIR, Thermal and SEM studies; the effect of complexing salt and temperature on ionic conductivity is also discussed. The maximum conductivity value obtained for the solid polymer electrolyte film at 303 K is 4.2 × 10⁻³ S/cm.     

PEO electrolytes containing dioctyl phthalate (DOP) for dye-sensitized nanocrystalline TiO2 solar cells

In this paper, we aim to prepare polymer electrolytes consisting of NaI and I₂ dissolved in poly(ethylene oxide) (PEO) and dioctyl phthalate (DOP) as an additive and apply the electrolytes to dye-sensitized solar cells (DSSC). Upon the incorporation of salt, the phthalic-stretching C=O bands of DOP in Fourier transform infrared spectra shifted to a lower wave number (Δf = 93 cm⁻¹), confirming the unusual strong complex formation between sodium ions and phthalic oxygen. Coordinative interactions and structural changes of PEO/NaI/I₂/DOP electrolytes have also been characterized by wide angle X-ray scattering, presenting an almost amorphous structure of the polymer electrolytes. The ionic conductivity of the polymer electrolytes reached ∼10^–4 S/cm at room temperature at the mole ratio of [EO]:[Na]:[DOP] = 10:1:0.5, as determined by the four-probe method. DSSC using the polymer electrolytes and conductive indium tin oxide glasses exhibited 2.9% of overall energy conversion efficiency (=P _max/P _in × 100) at one sun condition (100 mW/cm²). The good interfacial contact between the electrolytes and the dye-attached nanocrystalline TiO₂ layers were verified by field-emission scanning electron microscopy.     

Lithium ion transport in PVC/PEG 2000 blend polymer electrolytes complexed with LiX (X=ClO 4? , BF 4? , and CF3SO 3? )

This paper describes preparation and characterization of polyvinyl chloride and polyethylene glycol 2000 blend polymer electrolytes with LiX (X=ClO₄⁻, BF₄⁻, and CF₃SO₃⁻) salt by solution casting technique. Ethylene carbonate and propylene carbonate mixture was used as the plasticizers. LiClO₄-based electrolytes exhibited better ionic conduction behavior than other salts. The thermal profiles ascertain the stability of the membranes up to 120°C by differential scanning calorimetry. Complexation and crystallinity were studied through X-ray diffraction measurements. Phase morphological study reveals the porous nature of the polymer electrolyte membranes.     

Morphology,chemical interaction,and conductivity of a PEO-ENR50 based on solid polymer electrolyte

A solid polymer electrolytes (SPE) comprising blend of poly(ethylene oxide; PEO) and epoxidized natural rubber as a polymer host and LiCF₃SO₃ as a dopant were prepared by solution-casting technique. The SPE films were characterized by field emission scanning electron microscopy to determine the surface morphology, X-ray diffraction, and differential scanning calorimeter to determine the crystallinity and thermogravimetric analysis to confirm the mass decrease caused by loss of the solvent. While the presence of the complexes was investigated by reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Electrochemical impedance spectroscopy was conducted to obtain ionic conductivity. Scanning electron microscopy analysis showed that a rough surface morphology of SPE became smoother with addition of salt, while ATR-FTIR spectroscopy analysis confirmed the polymer salt complex formation. The interaction occurred between the salt, and ether group of polymer host where the triple peaks of ether group in PEO merged and formed one strong peak at 1,096 cm⁻¹. Ionic conductivity was found to increase with the increase of salt concentration in the polymer blend complexes. The highest conductivity achieved was 1.4 × 10⁻⁴ Scm⁻¹ at 20 wt.% of LiCF₃SO₃, and this composition exhibited an Arrhenius-like behavior with the activation energy of 0.42 eV and the preexponential factor of 1.6 × 10³ Scm⁻¹.     

Investigation of dibutyl phthalate as plasticizer on poly(methyl methacrylate)–lithium tetraborate based polymer electrolytes

Polymer electrolyte membranes, comprising of poly(methyl methacrylate) (PMMA), lithium tetraborate (Li₂B₄O₇) as salt and dibutyl phthalate (DBP) as plasticizer were prepared using a solution casting method. The incorporation of DBP enhanced the ionic conductivity of the polymer electrolyte. The polymer electrolyte containing 70 wt.% of poly(methyl methacrylate)–lithium tetraborate and 30 wt.% of DBP presents the highest ionic conductivity of 1.58 × 10⁻⁷ S/cm. The temperature dependence of ionic conductivity study showed that these polymer electrolytes obey Vogel–Tamman–Fulcher (VTF) type behaviour. Thermogravimetric analysis (TGA) was employed to analyse the thermal stability of the polymer electrolytes. Fourier transform infrared (FTIR) studies confirmed the complexation between poly(methyl methacrylate), lithium tetraborate and DBP.     

Impedance and FTIR studies on plasticized PMMA–LiN(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript> nanocomposite polymer electrolytes

Plasticized polymer electrolytes composed of poly(methyl methacrylate) (PMMA) as the host polymer and lithium bis(trifluoromethanesulfonyl)imide LiN(CF₃SO₂)₂ as a salt were prepared by solution casting technique at different ratios. The ionic conductivity varied slightly and exhibited a maximum value of 3.65 × 10⁻⁵ S cm⁻¹ at 85% PMMA and 15% LiN(CF₃SO₂)₂. The complexation effect of salt was investigated using FTIR. It showed some simple overlapping and shift in peaks between PMMA and LiN(CF₃SO₂)₂ salt in the polymer electrolyte. Ethylene carbonate (EC) and propylene carbonate (PC) were added to the PMMA–LiN(CF₃SO₂)₂ polymer electrolyte as plasticizer to enhance the conductivity. The highest conductivities obtained were 1.28 × 10⁻⁴ S cm⁻¹ and 2.00 × 10⁻⁴ S cm⁻¹ for EC and PC mixture system, respectively. In addition, to improve the handling of films, 1% to 5% fumed silica was added to the PMMA–LiN(CF₃SO₂)₂–EC–PC solid polymer electrolyte which showed a maximum value at 6.11 × 10⁻⁵ S cm⁻¹ for 2% SiO₂.     

Vibrational and impedance spectroscopic analysis of poly(vinyl alcohol)-based solid polymer electrolytes

Solid polymer electrolytes based on poly(vinyl alcohol) (PVA) doped with NH₄Br have been prepared by the solution-casting method. The complex formation between the polymer and the salt has been confirmed by Fourier transform infrared spectroscopy. The highest conductivity at 303 K has been found to be of the order of 10⁻⁴ Scm⁻¹ for 25 mol% NH₄Br-doped PVA system. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conducting species are predominantly ions. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Structural and ionic conductivity studies on proton conducting polymer electrolyte based on polyvinyl alcohol

An attempt has been made to prepare a new proton conducting polymer electrolyte based on polyvinyl alcohol (PVA) doped with NH₄NO₃ by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction analysis. The ionic conductivity of the prepared polymer electrolyte has been found by ac impedance spectroscopic analysis. The highest ionic conductivity has been found to be 7.5 × 10⁻³ Scm⁻¹ at ambient temperature for 20 mol% NH₄NO₃-doped PVA with low activation energy (~0.19 eV). The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship, which shows hopping of ions in the polymer matrix.     

Ion transport in proton conducting solid polymer electrolytes

In this communication the ion transport properties of polyvinyl alcohol complexed with orthophosphoric acid (H₃PO₄) have been investigated. The proton conduction is confirmed by hydrogen gas evolved at the cathode of the coulometer and the transference number of H⁺ ion has been determined. The transient ionic current (TIC) technique has been used to detect the mobile ionic species and their mobilities are evaluated. The ionic mobility was found to be of the order of 10⁻⁴ cm².V⁻¹.s⁻¹ for H⁺ ions. It is observed that the bulk electrical conductivity increases with the temperature following the Arrhenius type behaviour. Variation of charge carrier concentration with the molar ratio of H₃PO₄ in the sample reveals that the carrier concentration is largely affected by the amount of dopant in the complexes.     

Structural,thermal and ion transport studies on nanocomposite polymer electrolyte-{(PEO + SiO<Subscript>2</Subscript>):NH<Subscript>4</Subscript>SCN} system

Development and characterisation of polyethylene oxide (PEO)-based nanocomposite polymer electrolytes comprising of (PEO-SiO₂): NH₄SCN is reported. For synthesis of the said electrolyte, polyethylene oxide has been taken as polymer host and NH₄SCN as an ionic charge supplier. Sol–gel-derived silica powder of nano dimension has been used as ceramic filler for development of nanocomposite electrolytes. The maximum conductivity of electrolyte ∼2.0 × 10⁻⁶ S/cm is observed for samples containing 30 wt.% silica. The temperature dependence of conductivity seems to follow an Arrhenius-type, thermally activated process over a limited temperature range.