Triphenylene silanes for direct surface anchoring in binary mixed self-assembled monolayers

New triphenylene-based silanes 2-(ω-(chlorodimethylsilyl)-n-alkyl)-3,6,7,10,11-penta-m-alkoxytriphenylene 4 (Tm-Cn) with n = 8 or 9 and m = 7, 8, 9, 10, or 11 were synthesized, and their self-assembly behavior in the liquid state and at glass and silicon oxide surfaces was investigated. The mesomorphic properties of triphenylene silanes 4 (Tm-Cn) and their precursors 3 (Tm-Cn) were determined by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and X-ray diffraction. From the small-angle X-ray scattering (SAXS) regime, a preferential discotic lamellar mesophase can be deduced, and wide-angle X-ray scattering (WAXS) highlights the liquid-like characteristics of the alkyl side chains. To transfer these bulk structural properties to thin films, self-assembled monolayers (SAMs) were obtained by adsorption from solution and characterized by water contact angle measurements, null ellipsometry, and atomic force microscopy (AFM). Employing the concentration as an additional degree of freedom, binary SAMs of 2-(ω-(chlorodimethylsilyl)-undecyl)-3,6,7,10,11-penta-decyloxytriphenylene 4 (T10-C11) were coassembled with chlorodecyldimethylsilane or chlorodimethyloctadecylsilane, and their capability as model systems for organic templating was evaluated. The structure of the resulting binary mixed SAMs was analyzed by water contact angle measurements, null ellipsometry, and X-ray reflectivity (XRR) in combination with theoretical modeling by a multidimensional Parratt algorithm and AFM. The composition dependence of film thickness and roughness can be explained by a microscopic model including the steric hindrance of the respective molecular constituents.     

Structural characterization of aldehyde-terminated self-assembled monolayers

The structure of aldehyde-terminated alkanethiol self-assembled monolayers (SAMs) on Au(111) is investigated using scanning tunneling microscopy (STM), atomic force microscopy (AFM), and density functional theory (DFT) calculations. For the first time, the structures of aldehyde-terminated SAMs are revealed with molecular resolution. SAMs of 11-mercapto-1-undecanal exhibit the basic (radical3xradical3)R30 degrees periodicity and form various c(4x2) superstructures upon annealing. In conjunction with DFT studies, the models of the (radical3xradical3)R30 degrees and the c(4x2) superstructures are constructed. In comparison with alkanethiol SAMs, the introduction of aldehyde-termini results in smaller domain size, lower degree of long-range order, large coverage of disordered areas, and higher density of missing molecules and other point defects within domains of closely packed molecules. The origin of these structural differences is mainly attributed to the strong dipole-dipole interactions among the aldehyde termini.     

Surface-confined energy transfer in mixed self-assembled monolayers

We have fabricated a set of self-assembled monolayers consisting of naphthalene and dansyl derivatives in a range of surface loading ratios for the purpose of examining excitation transport in mixed self-assembled monolayer systems. Both tethered chromophores were immobilized on an epoxide-terminated adlayer on silica via an identical spacer, where the linking chemistry produced an amide linkage. X-ray photoelectron spectroscopy (XPS), ellipsometry, and contact angle measurements were used to characterize these chromophore-containing layers. The excitation transfer behavior of these monolayers has been examined using steady-state and time-resolved fluorescence spectroscopy. Steady-state fluorescence measurements show that excitation transfer from the naphthalene to dansyl chromophores occurs, with the efficiency of excitation transport scaling with chromophore surface loading densities, as expected. The donor lifetimes decrease with increasing acceptor loading density, and the functional form of the acceptor decay was independent of the donor/acceptor ratio. Our findings are not consistent with a homogeneous adlayer, but do provide information on the structural heterogeneity that is characteristic of these interfaces.     

Surface miscibility of EPC/DOTAP/DOPE in binary and ternary mixed monolayers

Surface pressure (π)-molecular area (A) curves were used to characterize the packing of pseudo-ternary mixed Langmuir monolayers of egg phosphatidylcholine (EPC), 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and L-α-dioleoyl phosphatidylethanolamine (DOPE). This pseudo-ternary mixture EPC/DOPE/DOTAP has been successfully employed in liposome formulations designed for DNA non-viral vectors. Pseudo-binary mixtures were also studied as a control. Miscibility behavior was inferred from π-A curves applying the additivity rule by calculating the excess free energy of mixture (ΔG(Exc)). The interaction between the lipids was also deduced from the surface compressional modulus (C(s)(-1)). The deviation from ideality shows dependence on the lipid polar head type and monolayer composition. For lower DOPE concentrations, the forces are predominantly attractive. However, if the monolayer is DOPE rich, the DOTAP presence disturbs the PE-PE intermolecular interaction and the net interaction is then repulsive. The ternary monolayer EPC/DOPE/DOTAP presented itself in two configurations, modulated by the DOPE content, in a similar behavior to the DOPE/DOTAP monolayers. These results contribute to the understanding of the lipid interactions and packing in self-assembled systems associated with the in vitro and in vivo stability of liposomes.     

Electrochemical detection of nanoscale phase separation in binary self-assembled monolayers

Developing methods to probe the nature and structure of nanoscale environments continues to be a challenge in nanoscience. We report a cyclic voltammetry investigation of the internal, hydrogen-bond-driven phase separation of amide-containing thiols and alkanethiols. Amide-containing thiols with a terminal ferrocene carboxylate functional group were investigated in two binary monolayers, one homogeneously mixed and the other phase separated. The electrochemical response of the ferrocene probe was used to monitor adsorbate coverage, environment, and phase separation within each of these monolayers. The results demonstrate that the behavior of ferrocene-containing monolayers can be used to probe nanoscale organization.     

Sum frequency generation microscopy of microcontact-printed mixed self-assembled monolayers

Sum frequency generation imaging microscopy (SFGIM) is used to image the chemically distinct regions of a microcontact-printed monolayer surface. The contrast in the images is based on the vibrational spectrum of each component in the monolayer. Mixtures of C16 thiols on gold with CH3 and phenyl termination are imaged with a resolution of approximately 10 microm. Microcontact printing produces films that are different compared to the immersion procedure of forming self-assembled monolayers. The SFGIM technique is able to obtain a vibrational spectrum at each point on the surface and demonstrate that the stamped area has significant mixing with the molecules deposited from the backfilling solution.     

由烷基硫醇组成的三元混合膜结构与性质研究

本文采用共吸附法制备了由戊硫醇(PT),癸硫醇(DT)和十六烷基硫醇(HDT)组成的三元混合膜,通过循环伏安,X-射线光电子能谱,扫描隧道显微镜(STM)和导电原子力对其结构及性质进行了表征。研究表明硫醇分子通过Au-S键在金电极上形成了一层致密的单分子膜,组装膜表面组成与其在组装液中的摩尔浓度有关。混合膜中各组分形成独立的相区,具有不同的电子传递能力。该研究为未来纳米器件的开发提供更多样化的表面以及更加详实的理论依据。     

Rapid evaluation and screening of interfacial reactions on self-assembled monolayers

This paper reports 16 chemical reactions for elaborating the structures of self-assembled monolayers (SAMs) of alkanethiolates on gold. This work takes advantage of matrix-assisted laser desorption/ionization and time-of-flight mass spectrometry (MALDI-TOF MS) to rapidly characterize the products and yields of reactions that occur with molecules attached to monolayers. The paper also describes a method for screening reaction conditions, wherein monolayers are treated with an array of reactants and mass spectrometry is used to identify those regions that undergo reactions to give new, and unanticipated, products in high yield. These examples serve to increase the collection of reactions that can be used to elaborate the structures, and therefore the properties, of self-assembled monolayers of alkanethiolates on gold and to introduce label-free methods for screening interfacial reactions.     

Electrochemical behavior of unitary or binary self-assembled monolayers with thiol-derivatized cobaltous porphyrin

A new thiol-derivatized metalloporphyrin, 5-{3-methoxyl-4-(4-mercaptobutoxy)}phenyl-10,15,20-triphenylporphyrincobalt (MBPPCo), has been synthesized. The electrochemical behavior of unitary or binary self-assembled monolayers (SAMs) of MBPPCo and thiols with carboxylic terminal groups was investigated using Fe(CN)₆ ^3−/4− and ascorbic acid (AA) as probe species. The binary modified electrode showed a small increase in peak current but a large decrease in overpotential. However, in anionic electroactive species [Fe(CN)₆ ^3−/4− or AA], either positively charged MBPPCo or negatively charged thiol SAMs solely, slow electron transfer kinetics was obtained and the possible reasons for the discrepancy are discussed.     

Adsorption behavior of plasmid DNA on binary self-assembled monolayers modified gold substrates

Gold is known to have good biocompatibility because of its inert activity and the surface property can be easily tailored with self-assembled monolayers (SAMs). In previous works, gold surfaces were tailored with homogeneously mixed amine and carboxylic acid functional groups to generate surfaces with a series of isoelectronic points (IEPs). In other words, by tailoring the chemical composition in binary SAMs, different surface potentials can be obtained under controlled pH environments. To understand how the surface potentials affect the interaction at the interface, a binary-SAMs-modified Au electrode on a quartz crystal microbalance with dissipation detection (QCM-D) was used owing to the high weight sensitivity of QCM-D. In QCM-D, the frequency shift and the energy dissipation are monitored simultaneously to determine the adsorption behaviors of the plasmid DNA to surfaces of various potentials in Tris-buffered NaCl solutions of different pH. The results revealed that the plasmid DNA can be adsorbed on the SAM-modified surfaces electrostatically; thus, in general, the amount of adsorbed plasmid DNA decreased with increasing environmental pH and the decreasing ratio of the amine functional groups on the surfaces owing to weaker positive potentials on the surface. For the high amine-containing surfaces, due to the strong electrostatic attraction, denser films were observed, and thus, the apparent thickness decreased slightly. The negatively charged carboxylic acid surfaces can still adsorb the negatively charged plasmid DNA at some conditions. In other words, the electrostatic model cannot explain the adsorption behavior completely, and the induced dipole (Debye) interaction between the charged and polarizable molecules needs to be considered as well.     

Ferrocenylalkylthiolates as a probe of heterogeneity in binary self-assembled monolayers on gold

The oft-cited complexity of tethered ferrocene electrochemistry in single component (FcRS-) or binary (FcRS-/CH3R'S-) self-assembled monolayers (SAMs) on gold has been investigated. The complex voltammetry is shown to be linked to local electrostatics caused by the formation of the ferrocenium ion. This conclusion is reached by studying model effects in binary SAMs, where a cationic alkylthiolate (H3N+ C11S-Au) is mixed with FcC12S-Au. A fitting procedure involving both a Gaussian and a Lorentzian distribution is used for deconvolution of the two peaks which are consistently observed in the SAMs when chi(Fc)surf > or = 0.2. The lower-potential (E degrees ' = 250 mV) and higher-potential (E degrees ' = 350 mV) voltammetric peaks are assigned to Fc moieties in "isolated" and "clustered" states, respectively. Use of this method to better understand SAM structure is demonstrated by distinguishing the degree of homogeneity in two binary SAMs of similar composition.     

Structural characterization of self-assembled multifunctional binary nanoparticle superlattices

Nanocrystals of different size and functionality (e.g., noble metals, semiconductors, oxides, magnetic alloys) can be induced to self-assemble into ordered binary superlattices (also known as opals or colloidal crystals), retaining the size tunable properties of their constituents. We have built a variety of binary superlattices from monodisperse PbS, PbSe, CoPt3, Fe2O3, Au, Ag, and Pd nanocrystals, mixing and matching these nanoscale building blocks to yield multifunctional nanocomposites (metamaterials). Superlattices with AB, AB2, AB3, AB4, AB5, AB6, and AB13 stoichiometry with cubic, hexagonal, tetragonal, and orthorhombic symmetries have been identified. Assemblies with the same stoichiometry can be produced in several polymorphous forms by tailoring the particle size and deposition conditions. We have identified arrays isostructural with NaCl, CuAu, AlB2, MgZn2, MgNi2, Cu3Au, Fe4C, CaCu5, CaB6, NaZn13, and cub-AB13 compounds emphasizing the parallels between nanoparticle assembly and atomic scale crystal growth and providing confidence that many more structures will follow. Recently, we have demonstrated that electrical charges on sterically stabilized nanoparticles in addition to such parameters as particle size ratio and their concentrations can provide the formation of a much broader pallet of binary nanoparticle superlattices as compared with the limited number of possible superlattices formed by hard noninteracting spheres. In this contribution, we demonstrate a large variety of different binary superlattices, provide their detailed structural characterization, and discuss the role of energetic and kinetic factors in the cocrystallization process. We found that Coulomb, van der Waals, charge-dipole, dipole-dipole, and other interactions can contribute equally to cocrystallization, allowing superlattice formation to be dependent on a number of tunable parameters. We present binary superlattices as a new class of materials with a potentially unlimited library of constituents over a wide range of tunable structures.     

Surface vibrations in alkanethiol self-assembled monolayers of varying chain length

The effect of chain length on the low-energy vibrations of alkanethiol striped phase self-assembled monolayers on Au(111) was studied. We have examined the low-energy vibrational structure of well-ordered, low-density 1-decanethiol (C10), 1-octanethiol (C8), and 1-hexanethiol (C6) to further understand the interaction between adsorbate and substrate. Dispersionless Einstein mode phonons, polarized perpendicularly to the surface, were observed for the striped phases of C10, C8, and C6 at 8.0, 7.3, and 7.3 meV, respectively. An overtone at 12.3 meV was also observed for C6/Au(111). These results, in concert with molecular dynamics simulations, indicate that the forces between the adsorbate and substrate can be described using simple van der Waals forces between the hydrocarbon chains and the Au substrate with the sulfur chemisorbed in the threefold hollow site.     

Nanoscale clustering of carbohydrate thiols in mixed self-assembled monolayers on gold

Self-assembled monolayers (SAMs) bearing pendant carbohydrate functionality are frequently employed to tailor glycan-specific bioactivity onto gold substrates. The resulting glycoSAMs are valuable for interrogating glycan-mediated biological interactions via surface analytical techniques, microarrays, and label-free biosensors. GlycoSAM composition can be readily modified during assembly by using mixed solutions containing thiolated species, including carbohydrates, oligo(ethylene glycol) (OEG), and other inert moieties. This intrinsic tunability of the self-assembled system is frequently used to optimize bioavailability and antibiofouling properties of the resulting SAM. However, until now, our nanoscale understanding of the behavior of these mixed glycoSAMs has lacked detail. In this study, we examined the time-dependent clustering of mixed sugar + OEG glycoSAMs on ultraflat gold substrates. Composition and surface morphologic changes in the monolayers were analyzed by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. We provide evidence that the observed clustering is consistent with a phase separation process in which surface-bound glycans self-associate to form dense glycoclusters within the monolayer. These observations have significant implications for the construction of mixed glycoSAMs for use in biosensing and glycomics applications.     

Surface stress, kinetics, and structure of alkanethiol self-assembled monolayers

The surface stress induced during the formation of alkanethiol self-assembled monolayers (SAMs) on gold from the vapor phase was measured using a micromechanical cantilever-based chemical sensor. Simultaneous in situ thickness measurements were carried out using ellipsometry. Ex situ scanning tunneling microscopy was performed in air to ascertain the final monolayer structure. The evolution of the surface stress induced during coverage-dependent structural phase transitions reveals features not apparent in average ellipsometric thickness measurements. These results show that both the kinetics of SAM formation and the resulting SAM structure are strongly influenced both by the surface structure of the underlying gold substrate and by the impingement rate of the alkanethiol onto the gold surface. In particular, the adsorption onto gold surfaces having large, flat grains produces high-quality self-assembled monolayers. An induced compressive surface stress of 15.9 +/- 0.6 N/m results when a c(4x2) dodecanethiol SAM forms on gold. However, the SAMs formed on small-grained gold are incomplete and an induced surface stress of only 0.51 +/- 0.02 N/m results. The progression to a fully formed SAM whose alkyl chains adopt a vertical (standing-up) orientation is clearly inhibited in the case of a small-grained gold substrate and is promoted in the case of a large-grained gold substrate.     

Electroactive mixed self-assembled monolayers: A numerical overview of phase segregations

We propose a modeling of phase segregations, inspired by image filtering, and dedicated to electrochemical systems. This original approach is compared to previous experimental results and enhanced with the concepts of 2D segregation and site percolation threshold.     

Attachment of tyrosinase on mixed self-assembled monolayers for the construction of electrochemical biosensor

<正>A mixed self-assembled monolayers(SAMs) of thioctic acid(T-COOH) and thioctic acid amide(T-NH_2) were used to immobilize tyrosinase for fabricating biosensor.The results showed that the mixed SAMs prepared from solution at the ratio of 1:4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate.The biosensor exhibited a fast response and high sensitivity for sensing substrate.