根据时分复用机制优化多路FIR滤波器实现结构

针对多路有限长单脉冲响应(Finite Impulse Response,FIR)滤波器实现结构的资源需求量有待降低的问题,本文根据多路采样数据的时分多路复用传输机制,通过使多路采样数据复用同一单路FIR滤波器,对多路FIR滤波器的FPGA实现结构进行优化。分析证明,该优化实现结构由不同类型的单路FIR滤波器实现结构构成时,与典型多路FIR滤波器实现结构相比,其寄存器需求量大幅降低,同时可以保证乘法器和加法器需求量大幅降低或大致相同。     

Accurate quantification of (1)H spectra: from finite impulse response filter design for solvent suppression to parameter estimation.

A scheme for accurate quantification of (1)H spectra is presented. The method uses maximum-phase finite impulse response (FIR) filters for solvent suppression and an iterative nonlinear least-squares (NLLS) algorithm for parameter estimation. The estimation algorithm takes the filter influence on the metabolites of interest into account and can thereby correctly incorporate a large variety of prior knowledge into the estimation phase. The FIR filter is designed in such a way that no distortion of the important initial samples is introduced. The FIR filter method is compared numerically with the HSVD method for water signal removal in a number of examples. The results show that the FIR method, using an automatic filter design scheme, slightly outperforms the HSVD method in most cases. The good performance and ease of use of the FIR filter method combined with its low computational complexity motivate the use of the proposed method.     

Low frequency characteristics of a quasioptical Schottky diode detector part II: Experimental results

A detailed experimental study of the low frequency (video) response of a quasioptical Schottky diode detector over the microwave and FIR wavelength range is presented. An optimization of the responsivity versus the bias current is proposed and a generalized curve of the saturation power versus the FIR wavelength is given. This curve defines for any antenna point-contact Schottky diode detector, suitable for FIR detection, the power range for a linear detector response. A simple method is also described to calculate the coupling efficiency of the laser radiation into the antenna reception pattern.     

特定频率响应FIR滤波器的设计及其在水声中的应用

在水声信号处理中，有时普通滤波器不能够满足应用要求，需要利用具有任意的给定频率响应的滤波器，本文利用自适应方法设计具有给定频率响应的FIR滤波器，将将该方法设计的滤波器用于产生宽带信号的精确时延信号和进行时域宽带波速形成，使用效果较好。该类滤波器使用非常有效。而且计算量小，易于工程实现。     

Accurate Quantification of H Spectra: From Finite Impulse Response Filter Design for Solvent Suppression to Parameter Estimation

A scheme for accurate quantification of ¹H spectra is presented. The method uses maximum-phase finite impulse response (FIR) filters for solvent suppression and an iterative nonlinear least-squares (NLLS) algorithm for parameter estimation. The estimation algorithm takes the filter influence on the metabolites of interest into account and can thereby correctly incorporate a large variety of prior knowledge into the estimation phase. The FIR filter is designed in such a way that no distortion of the important initial samples is introduced. The FIR filter method is compared numerically with the HSVD method for water signal removal in a number of examples. The results show that the FIR method, using an automatic filter design scheme, slightly outperforms the HSVD method in most cases. The good performance and ease of use of the FIR filter method combined with its low computational complexity motivate the use of the proposed method.     

光数字相干接收机中色散补偿模块设计与优化

在高速光纤通信数字相干接收系统中,色散补偿模块的结构和性能将直接决定其是否具有实用价值.设计了比传统的有限脉冲响应(FIR)滤波器结构简单的偶对称型FIR滤波器,并通过数值仿真分析了FIR滤波器长度选取对补偿效果的影响.研究结果表明,在接收端光信噪比(OSNR)代价不高于1 dB的情况下,FIR滤波器长度折衷选取为最大...     

激光气体分析仪中数字滤波器的设计

由于基于可调谐二极管激光吸收光谱（TDLAS）技术的激光气体分析仪的二次谐波信号中存在较大的系统噪声,本文利用有限长单位冲激响应（FIR）,提出了激光气体分析仪的二次谐波在线滤波方法。在分析FIR数字滤波器原理的基础上,利用MATLAB窗函数设计了适合本激光气体分析仪的数字滤波器。然后,将仿真的FIR数字滤波算法移植到激光气体分析仪嵌入式系统中。最后,比较了滤波前后二次谐波信号波形,说明了在激光气体分析仪嵌入式系统中采用基于FIR数字滤波器滤波算法的可行性。实验结果表明：FIR数字滤波器对一组二次谐波信号进行滤波的运算时间为230ms,滤波后的二次谐波信号波形获得了较好的去噪效果,能够满足激光气体分析仪对含有噪声的二次谐波信号进行平滑去噪的要求,且滤波算法结构简单、运算时间短、可移植性强。     

Optimal design of FIR beamformer with frequency invariant patterns

Two approaches to the optimal design of FIR beamformers with frequency invariant patterns using second-order cone programming (SOCP) are proposed. The first approach is a two-step method, which is implemented via separately optimal array pattern synthesis and optimal FIR filters design. The array weights for each frequency bin within the working frequency band are designed to insure that the array patterns approximate the reference ones. And the FIR filter corresponding to each sensor is designed to insure that the frequency responses approximate the array weights. The second approach is a direct method, in which the beam response is expressed as a linear function of FIR filter tap weights and the filters are designed by jointly optimizing the spatial and frequency responses to achieve the desired array patterns. All the optimal design problems (array pattern synthesis, FIR filter design and joint optimization) are formulated as the SOCP, which can be solved efficiently using the well-developed interior-point methods. Results of computer simulations and lake experiment for a twelve-element semicircular array confirm satisfactory performance of the two approaches proposed in this paper.     

机械抖动激光陀螺新型信号处理方法的研究

针对高速采样低通滤波的线性脉冲响应(FIR)滤波器在机械抖动激光陀螺(MDRLG)信号处理中存在着较大的时延,限制MDRLG在快速跟踪中的应用,基于相关滤波技术提出了一种新的信号处理方法。对这一方法的基本理论进行了分析,并基于Labview实现了仿真。相关滤波后,激光陀螺输出中的抖动信号衰减了约41dB,还不能达到激光陀螺应用的要求,可以适当加一低阶的FIR低通滤波器去除抖动剥除后剩余的抖动成分和高频噪声。在静态条件下用这三种信号处理方法分别对激光陀螺零偏进行了测试。相关滤波法所测得零偏稳定性(1σ00)比50阶FIR滤波器差了将近三倍,相关滤波后再经过22阶的FIR低通滤波测得的零偏稳定性比50阶FIR低通滤波器的测试结果大了不足0.001°/h,延迟时间却从4.9ms减小至2.1ms。     

波前功率谱密度(PSD)测量滤波器的设计

在采用波前功率谱密度评价大口径光学元件时,由于测得的原始数据受到测量系统引入的各种噪音和外界干扰的作用,会使检测准确度下降.对比引入带通滤波技术,对原始数据的有效滤波,减小带外的噪音分量和频谱混叠现象的影响.分别设计了无限脉冲响应带通滤波器和有限脉冲响应带通滤波器,通过模拟分析比较了两者的性能,得出在波前波前功率谱密度用于评价大口径光学元件的面形质量时,采用有限脉冲响应滤波器可以得到更高的测量准确度.     

A novel high-order FIR photonic signal processor

A new topology for realizing a high-order FIR RF photonic filter is presented. It is based on a novel structure that uses wavelength conversion and a routing technique to enable a multiple-pass transmission of the signal to be obtained through a single photonic sub-filter. The sub-filter can be of low order, however the routing of the output of the sub-filter back to itself several times together with some additional coefficients, realizes a high-order filter. Experimental results are presented which demonstrate a high-order FIR photonic filter realization comprising 39 taps.     

一种块处理模式数字滤波器的DSP实现

 对称FIR(有限冲激响应)滤波器的严格的线性相位特性和系统稳定性在数据传输、图像处理等领域得到了广泛的应用。基于单点处理模式的传统数字滤波器能实时处理点信号,但在处理图像、语音等帧信号时,速度较慢,实时性不强。针对这个问题提出了块处理模式的解决方案。通过分析FIR滤波器的原理,设计出基于块处理模式的对称FIR滤波器,并在TMS320C5510芯片中实现。介绍了基于双指针循环寻址的滤波算法,并给出了相应的主要程序。计算机试验仿真表明块处理模式方案提高了帧信号的处理速度,滤波性能良好。     

三维形貌测试系统中的数字信号处理技术

本文采用一种基于数字滤波的正文解调算法,用于三维形貌测试系统中相位分布的计算。文中考察了频域理想低通滤波器、三阶巴特沃思滤波器、有限冲击响应滤波器以及空域均值滤波器,通过分析滤波器性能和比较处理结果,得出均值滤波器或有限冲击响应滤波器比较适用于类似于变形光栅的窄带信号。采用数字处理方法,可以由一帧变形光栅图迅速、精确地重建物体的形貌。     

Adaptive Laguerre filters for active noise control

Feedforward controllers are used in many active noise control (ANC) systems to generate destructive interference in noise fields. An ideal feedforward ANC controller should have an infinite impulse response (IIR) transfer function, but most available feedforward ANC controllers have finite impulse responses (FIR) instead. The main reason is related to the adaptation algorithms of ANC systems. In general, adaptive FIR filters converge faster with guaranteed stability. In this study, the adaptive Laguerre filter is proposed and tested in an ANC application with positive experimental effects. The new ANC controller is an IIR filter, but its adaptation is similar to that of a FIR filter with fast convergence and guaranteed stability. Detailed explanations and analysis are presented in the main text.     

Reconstruction of dynamic displacement and velocity from measured accelerations using the variational statement of an inverse problem

This paper presents two types of finite impulse response (FIR) filters to reconstruct dynamic displacement induced by structural vibration from measured acceleration. The governing equation for the reconstruction is derived by taking the variation of a minimization problem, which defines an inverse problem on displacement. A regularization function for overcoming the ill-posedness of the inverse problem is included in the minimization problem. The governing equation of the inverse problem becomes the same type of differential equation as that of a beam on an elastic foundation. The conventional FIR (CFIR) filter directly approximates the transfer function of the governing equation, while the FEM-based FIR (FFIR) filter is formulated by the discretization of the minimization problem with the finite element method. For the finite element discretization, the Hermitian shape function is utilized. The proposed FFIR filter is capable of reconstructing displacement and velocity simultaneously. The fundamental characteristics of the proposed filters are investigated in the frequency domain using the transfer and accuracy functions. It is shown that the proposed FIR filters suppress low frequency noise components in measured accelerations effectively, and reconstruct physically meaningful displacement accurately. The validity of the proposed filters is demonstrated through a numerical simulation study, a field experiment and an evaluation of flutter derivatives using measurements taken from a wind tunnel test.     

级联积分梳状滤波器在超声检测系统中的应用*

在超声探伤系统中,通常要求回波幅度的垂直线性误差小于±5%,通常采样率需10倍于原始信号频率以上,对于高频探头来说对仪器的A/D性能要求较高。该文提出了一种基于现场可编程门阵列的对探伤信号恢复幅值方法,采用高效的级联积分梳状滤波器(CIC滤波器)及其FIR补偿滤波器进行滤波插值,在有限的采样频率下实现了高频信号的幅值恢复,并通过MATLAB和自研硬件平台进行了仿真、架构和实验,验证了CIC插值滤波器的滤波误差小于2.2%且效率高于具有同等插值效果的FIR插值滤波器,具备很好的工程应用价值。     

有限冲击响应滤波器在四频激光陀螺中的应用

针对目前四频差动激光陀螺光学解调方案可靠性和温度特性差的特点,介绍一种基于FPGA的数字拍频解调方案。分析了四频差动激光陀螺数字拍频解调对电路系统的需求,对数字拍频解调的关键部件低通滤波器进行了设计与实现。根据四频差动激光陀螺的特性参数计算滤波器的通带截止频率及阻带截止频率,使用MATLAB的滤波器设计和分析工具FDATool完成了有限冲击响应（FIR）数字滤波器的参数设计,并利用Xilinx公司的FPGA集成开发环境ISE实现FIR数字滤波器的片上系统设计。仿真和实验结果表明,所设计的FIR数字滤波器对四频差动激光陀螺的和频分量衰减达到-66 dB,满足四频差动激光陀螺拍频解调的需求,并有助于实现四频差动激光陀螺的小型化和数字化。     

New demodulation filter in digital phase rotation beamforming

In this paper, we present a new quadrature demodulation filter to reduce hardware complexity in digital phase rotation beamforming. Due to its low sensitivity to phase delay errors, digital quadrature demodulation is commonly used in ultrasound machines. However, since it requires two lowpass filters for each channel to remove harmonics, the direct use of conventional finite impulse response (FIR) filters in ultrasound machines is computationally expensive and burdensome. In our new method, an efficient multi-stage uniform coefficient (MSUC) filter is utilized to remove harmonic components in phase rotation beamforming. In comparison with the directly implemented FIR (DI-FIR) and the previously-proposed signed-power-of-two FIR (SPOT-FIR) lowpass filters, the proposed MSUC filter reduces the necessary hardware resources by 93.9% and 83.9%, respectively. In simulation, the MSUC filter shows a negligible degradation in image quality. The proposed method resulted in comparable spatial and contrast resolution to the DI-FIR approach in the phantom study. These preliminary results indicate that the proposed quadrature demodulation filtering method could significantly reduce the hardware complexity in phase rotation beamforming while maintaining comparable image quality.     

Scheme for generation of flat top and high signal-to-noise ratio optical frequency comb

We demonstrate a new scheme for generation of optical frequency comb(OFC) based on cascade modulators, 23 comb lines within 0.5 d B spectral power variation are obtained. An optical finite impulse response(FIR) filter is introduced for suppression of amplified spontaneous emission noise. It is shown that carrier-to-noise-ratio of the OFC generated by this scheme can be as high as 38.8 d B with 12 d B improvement by using a 16-tap FIR filter, and the error vector magnitude performances of loaded Nyquist-16 quadrature amplitude modulation signal is improved from 14.20% to 7.44%.     

一种用于超声成像的零相位滤波后处理方法*

针对超声成像中基于有限脉冲响应滤波器的零相位滤波处理效率低难以满足实时性要求高的系统需求的问题,提出采用无限冲激响应滤波器实现零相位滤波后处理的方法。首先,分别设计幅频特性相似的有限脉冲响应滤波器和无限冲激响应滤波器作为零相位滤波器的基础滤波器;然后,针对超声相控阵系统采集的超声波回波射频信号,采用两种不同的零相位滤波方法进行处理,对比分析二者的性能、成像效果和效率。结果表明,实现幅频特性近似的零相位滤波,无限冲激响应滤波器具有更低的阶数,可以达到前者的1/4,算法的运算量更低,仅约为前者的1/2。当无限冲激响应滤波器采用直接形式实现时,效率更高,系统的实时性更好。