One-pot thioetherification of aryl halides with thiourea and benzyl bromide in water catalyzed by Cu-grafted furfural imine-functionalized mesoporous SBA-15

Surface functionalization of SBA-15 followed by its reaction with Cu(OAc)(2) has been carried out to develop a new Cu-grafted functionalized mesoporous material, which catalyzes one-pot three component coupling of different aryl halides with thiourea and benzyl bromide in aqueous medium to produce aryl thioethers in very good yields (80-88%).     

Regioselective C–S bond formation accomplished by copper-catalyzed regioselective C–F substitution of perfluoroarenes with aryl thioacetates or benzyl thioacetate

Practical and straightforward method for regioselective C–S bond formation accomplished by copper-catalyzed regioselective C–F substitution of electron-deficient perfluoroarenes with aryl thioacetates or benzyl thioacetate has been developed. Because of its high reaction efficiency, good chemoselectivity and regioselectivity, and excellent functional-group compatibility, this protocol provides a useful and operationally simple access to polyfluoroaryl thioethers used for drugs and material chemistry.     

Copper nanoparticles supported on polyaniline‐functionalized multiwall carbon nanotubes: An efficient and recyclable catalyst for synthesis of unsymmetric sulfides using potassium ethyl xanthogenate in water

A new and powerful polyaniline‐functionalized carbon nanotube‐supported copper(II) nanoparticle catalyst was successfully prepared and evaluated as a heterogeneous catalyst for the one‐pot synthesis of unsymmetric thioethers by coupling of aryl, alkyl and benzyl halides using potassium ethyl xanthogenate as source of sulfur in water. All of these reactions gave the desired products in good to excellent yields. The catalyst is available, air‐stable and can be reused several times without significant loss in its catalytic activity.     

Manganese‐Catalyzed Cross‐Coupling of Thiols with Aryl Iodides

A manganese‐catalyzed cross‐coupling reaction of thiols with aryl iodides, furnishing aryl thioethers in good to excellent yields has been reported; the system shows good functional group tolerance and enables the sterically demanding aryl iodides to couple with thiols.     

An efficient intermolecular C(aryl)-S bond forming reaction catalyzed by BINAM-copper(II) complex

A wide range of diaryl thioethers and aryl alkyl thioethers are synthesized from the corresponding aryl iodides and aromatic/aliphatic thiols through Ullmann type intermolecular coupling reactions in the presence of a catalytic amount of easily available BINAM-Cu(OTf)₂ complex. Less reactive aryl bromides have also been shown to react with thiols under identical reaction conditions to give good yields of the thioethers without increasing the reaction temperature and time.     

CuI-catalyzed direct synthesis of diaryl thioethers from aryl boronic acids and arylsulfonyl chlorides

A CuI-catalyzed direct coupling of aryl boronic acids with arylsulfonyl chlorides for the preparation of diaryl thioethers was developed. The reaction is initiated by a PPh₃ reduction of the arylsulfonyl chloride, followed by a CuI-catalyzed C–S coupling with an aryl boronic acid. Various arylsulfonyl chlorides can directly serve as a sulfur source in this mild and efficient reaction giving the desired products in moderate to good yields. Moreover, this practical method has also been applied to the thioetherification of aryl iodides and acetylacetones.     

A mild and practical deprotection method for benzyl thioethers

A highly effective and mild deprotection method was developed for benzyl thioethers using dibutylmagnesium in the presence of a catalytic amount of titanocene dichloride. This methodology is applicable to both aromatic and aliphatic benzyl thioethers.     

Synthesis of diaryl thioethers from aryl halides and potassium thiocyanate

An efficient palladium catalyst was synthesized using nicotine, benzyl chloride and palladium chloride. The structure of this catalyst was characterized and it was then used for the synthesis of diaryl sufides. A variety of diaryl thioethers were synthesized under relatively mild reaction conditions. This protocol avoids foul‐smelling thiols via cross‐coupling of aryl halides with potassium thiocyanate and all substrates give the corresponding products in good to excellent yields in the presence of low amounts of the catalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

无催化剂微波促进下C—O,C—N和C—S交叉偶联反应研究

在无金属催化剂的条件下,利用微波加热促进C—O,C—N和C—S交叉偶联反应.实验发现以DMSO为溶剂,t-BuOK为碱,利用微波加热,活化的氯代芳烃能与各类亲核试剂顺利反应,得到中等及优良的产率.     

Copper-catalyzed asymmetric oxidation of sulfides

Copper-catalyzed asymmetric sulfoxidation of aryl benzyl and aryl alkyl sulfides, using aqueous hydrogen peroxide as the oxidant, has been investigated. A relationship between the steric effects of the sulfide substituents and the enantioselectivity of the oxidation has been observed, with up to 93% ee for 2-naphthylmethyl phenyl sulfoxide, in modest yield in this instance (up to 30%). The influence of variation of solvent and ligand structure was examined, and the optimized conditions were then used to oxidize a number of aryl alkyl and aryl benzyl sulfides, producing sulfoxides in excellent yields in most cases (up to 92%), and good enantiopurities in certain cases (up to 84% ee).     

A general rhodium-catalyzed cross-coupling reaction of thiols with aryl iodides

The general procedure for the rhodium-catalyzed cross-coupling of thiols with aryl iodides is described. The catalytic system consists of 5 mol % of [RhCl(cod)]₂ and 10 mol % of PPh₃ as a ligand. A variety of aryl iodides reacted with thiols, giving aryl thioethers in good to excellent yields. It is important to note that the deactivated aryl iodides such as 4-iodoanisole is worked smoothly to provide the corresponding aryl thioethers in excellent yields. Functional groups such as free-amines, chloro, are all tolerated under the employed reaction conditions.     

Nickel‐catalyzed aminocarbonylation of aryl halides with carbamoylsilanes: efficient synthesis of secondary (primary) aromatic amides

A nickel‐catalyzed aminocarbonylation of aryl halides using carbamoylsilane as an amide source leading to corresponding secondary or primary aromatic amides has been developed, in which the methoxymethyl and benzyl were used as amino protecting group. The protocol tolerates a broad range of aryl halides bearing different functional groups to afford good yields of aryl amides under mild reaction conditions. The types and the relative positions of substituents on the aryl ring make a notable impact on the coupling efficiency. The plausible mechanism of nickel‐catalyzed aminocarbonylation has been suggested.     

Catechol violet as new, efficient, and versatile ligand for Cu(I)-catalyzed C-S coupling reactions

Combination of CuI and Catechol violet (CuI-CV) was employed as catalyst for the first time in the C-S coupling reaction of a wide variety of aromatic halides, such as aryl iodides, bromo pyridines, activated aryl chlorides, and vinyl iodide with thiols to afford the corresponding thioethers in good to excellent yields. Broad range of functional group tolerance present in both the coupling partners has been observed in this reaction protocol.     

5-(hydroxymethyl)oxazoles: versatile scaffolds for combinatorial solid-phase synthesis of 5-substituted oxazoles

A scheme combining the preparation of building blocks in solution followed by solid-phase combinatorial chemistry has been developed to side-chain diversify 5-(hydroxymethyl)oxazole scaffold (1) into aryl ethers, thioethers, sulfones, sulfonamides, and carboxamides. Protected heterocyclic scaffolds 2 were linked to the solid phase and N-terminal derivatized using active ester chemistry, providing chemset 4?1-4,1-4?. The free side-chain hydroxyl of 4 was smoothly converted to aryl ethers 6 under Mitsunobu conditions, with a broad range of substituted phenols. Alternatively, quantitative conversion of hydroxyl to bromide followed by displacement with alkyl and aryl thiols gave thioethers 8. Thioethers were optionally oxidized to sulfones 9. Bromide displacement by azide, followed by reduction to amine and acylation with a range of carboxylic acids and sulfonyl chlorides gave carboxamides 11 and sulfonamides 13, respectively. Crude purity at typically >90% was observed for each of the five modifications detailed. A series of 20 compounds, exemplifying each modification, was reprepared, purified, and fully characterized.     

Synthesis of Dibenzo[c,e]oxepin‐5(7H)‐ones from Benzyl Thioethers and Carboxylic Acids: Rhodium‐Catalyzed Double CH Activation Controlled by Different Directing Groups

A rhodium(III)‐catalyzed cross‐coupling of benzyl thioethers and aryl carboxylic acids through the two directing groups is reported. Useful structures with diverse substituents were efficiently synthesized in one step with the cleavage of four bonds (C? H, C? S, O? H) and the formation of two bonds (C? C, C? O). The formed structure is the privileged core in natural products and bioactive molecules. This work highlights the power of using two different directing groups to enhance the selectivity of a double C? H activation, the first of such examples in cross‐oxidative coupling.     

Synthesis of Dibenzo[c,e]oxepin‐5(7H)‐ones from Benzyl Thioethers and Carboxylic Acids: Rhodium‐Catalyzed Double C?H Activation Controlled by Different Directing Groups

A rhodium(III)‐catalyzed cross‐coupling of benzyl thioethers and aryl carboxylic acids through the two directing groups is reported. Useful structures with diverse substituents were efficiently synthesized in one step with the cleavage of four bonds (C H, C S, O H) and the formation of two bonds (C C, C O). The formed structure is the privileged core in natural products and bioactive molecules. This work highlights the power of using two different directing groups to enhance the selectivity of a double C H activation, the first of such examples in cross‐oxidative coupling.     

Rhodium-catalyzed silylation and intramolecular arylation of nitriles via the silicon-assisted cleavage of carbon-cyano bonds

A rhodium-catalyzed silylation reaction of carbon-cyano bonds using disilane has been developed. Under these catalytic conditions, carbon-cyano bonds in aryl, alkenyl, allyl, and benzyl cyanides bearing a variety of functional groups can be silylated. The observation of an enamine side product in the silylation of benzyl cyanides and related stoichiometric studies indicate that the carbon-cyano bond cleavage proceeds through the deinsertion of silyl isocyanide from eta(2)-iminoacyl complex B. Knowledge gained from these studies has led to the development of a new intramolecular biaryl coupling reaction in which aryl cyanides and aryl chlorides are cross-coupled.     

Nickel-Catalyzed Thiolation of Aryl Nitriles

A nickel-catalyzed thiolation of aryl nitriles has been developed to access functionalized aryl thioethers. The ligand dcype (1,2-bis(dicyclohexylphosphino)ethane) as well as the base KO^tBu (potassium tert-butoxide) are essential to achieve this transformation. This scalable and practical process involves both a C−C bond activation and a C−S bond formation. Furthermore, this reaction shows a high functional-group tolerance and enables the late-stage functionalization of important molecules.     

Investigation of steric and electronic effects in the copper-catalysed asymmetric oxidation of sulfides

Steric and electronic effects in the copper-catalysed asymmetric oxidation of aryl benzyl, aryl alkyl and alkyl benzyl sulfides have been investigated. The presence of an aryl group directly attached to the sulfur is essential to afford sulfoxides with high enantioselectivities, with up to 97% ee for 2-naphthyl benzyl sulfoxide, the highest enantioselectivity achieved to date for copper-catalysed asymmetric sulfoxidation. In contrast, the benzyl substituent can be replaced by sterically comparable groups with no effect on enantioselectivity. Copper-mediated oxidation of substituted aryl benzyl sulfides display modest steric and electronic effects resulting in comparable or lower enantioselectivities to those obtained with the unsubstituted benzyl phenyl sulfide.     

Radical, one-step approach to o-chlorophenyl thioethers from xanthates. A rapid access to vinylsilanes

Xanthates have been readily converted into o-chlorophenyl thioethers using a one-step procedure conducted under radical conditions. In some selected cases, these aryl thioethers were successfully oxidized to the corresponding sulfoxides and sulfenic acid elimination afforded the corresponding vinylsilanes.