Composition of heteroassociates formed in HF-pyridine and HF-formamide binary liquid systems

The IR spectra and the densities of solutions in HF-pyridine and HF-formamide binary liquid systems were measured over a wide range of mole ratios HF: Solv (Solv is the organic solvent). The composition of heteroassociates (HA) formed in these systems was determined by analysis of the concentration dependences of normalized (to the total number of moles per 1 L) optical density in the IR region and the excess density of the binary mixtures under study. The HA with the stoichiometric ratio 3: 1 are present in the HF-Py system at all studied mole ratios of the components (from 1: 12 to 20: 1). The 1: 2 HA were found in the dilute solutions, whereas the >6: 1 HA were revealed in the concentrated solutions. The HA with the stoichiometric ratio 4: 1 were found in HF-formamide system. The results obtained were compared with the known data on the composition of HA formed in the binary liquid systems HF-DMF, HF-Me₂CO, and HF-MeCN. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1281–1287, July, 2007.     

Composition and structure of heteroassociates formed in a binary liquid system HF-CH<Subscript>3</Subscript>CN

The concentration dependence of normalized absorbance (to the total number of moles of components in one liter) of HF solutions in acetonitrile (1:12–10:1) is analyzed. It is found that in the binary liquid system (BLS) under study molecular complexes with stoichiometric 1:1 and ～10:1 ratios of molecules occur along with the heteroassociates (HAs) found previously with the ratio HF:CH₃CN of 4:1. For each of the HAs the concentration range at which it is formed in BLS is evaluated, and the positions of HF stretching vibrational bands are found. Optimum configurations and vibrational frequencies of molecular complexes (HF) _m ·(CH₃CN) _n (m = 1–6, n = 1–2) of various topology are calculated using the density functional method (B3LYP/6-31 ++ G (d, p)). Their relative stability and the structure peculiarities are studied; complexation tendencies in the HF-CH₃CN system are revealed. The structure of HAs with 1:1 and 4:1 stoichiometric ratios of molecules is determined by comparing the results of calculations and experiment.     

Composition of heteroassociates formed in an HF-diethyl ketone liquid binary system

The IR spectra and solution densities in a binary liquid system (BLS) HF-diethyl ketone were measured for the first time upon variation of the component molar ratio from 1: 12 to 12: 1 and to 27: 1, respectively. Analysis of the concentration dependences of normalized (to the total number of moles of BLS components in 1 L) optical density and excess density of the solutions revealed the presence of 1: 1, 4: 1, and ∼12: 1 heteroassociates (HAs). For each associate, the concentration range in which it forms in the HF-(C₂H₅)₂CO binary mixture was estimated. It was shown that, at component molar ratios from 2: 1 to 9: 1, all three types of HAs are present simultaneously.     

Relationship between variously associated molecules in the HF-Et2CO solution

Data on the relationship between the molecules involved in various heteroassociates (HAs) and “free” molecules in the HF-Et₂CO binary liquid system (BLS) are obtained by two independent methods: experimental and computational. The first method is applicable in the 0:1–6:1 molar range provided that the IR spectrum of the solvent molecule contains a band whose frequency and intensity can be measured when this molecule passes from the “free state” to the composition of all Has present in BLS. The second method is based on taking into account the material balance between the “free” molecules and molecules involved in various HAs of the solvent and HF. This method requires the knowledge of stoichiometric ratios of molecules in HAs and concentrations at which they appear in the solution. It is shown that in HF-Et₂CO BLS, starting from the molar fraction of HF of ～0.25, the majority of molecules is involved in the composition of the complexes, and at the molar fraction of HF of ～0.50–0.92 already 90–100% of molecules of the solution form HAs.     

Composition and structure of heteroassociates formed in the HF-<Emphasis Type="Italic">N,N</Emphasis>-dimethylformamide binary liquid system

The concentration dependence of the normalized (to the total number of moles of the components per liter) absorbance of HF solutions in DMF in ratios from 1: 12 to 7: 1 was analyzed. In the binary liquid system (BLS) under consideration, there are molecular complexes with stoichiometric ratios of 1: 1 and ≥10: 1 along with heteroassociates (HA) with the HF to DMF ratio of 4: 1, which have been found earlier. For each HA, the concentration range, in which HA is formed in BLS, was estimated, and the positions of the stretching bands of HF were determined. The optimal configurations and the vibrational frequencies of the molecular complexes (HF) _m ·(DMF) _n (m = 1, 2, 4, 8; n = 1, 2) with different topologies were calculated using the density functional theory (B3LYP/6-31++G(d,p)). The relative stability and structural features of the latter complexes were investigated. The complex formation in the HF-DMF system was analyzed. The structures of HA with stoichiometric ratios of 1: 1 and 4: 1 were determined by comparing the results of calculations and experimental data.     

Structure of heteroassociates formed in the HF-(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>CO binary liquid system

The vibrational spectra of a series of HF solutions in acetone (1:20–8.9:1) are analyzed with the help of special techniques. It is shown that three types of strong heteroassociates (HAs) with 1:1, 4:1, and ≥10:1 stoichiometric ratios of the molecules are formed in the HF-(CH₃)₂CO binary liquid system. The concentration ranges of the existence of HAs in the solution and the stretching vibrational frequency of their constituent HF molecules are estimated. The density functional method (B3LYP/6-31++G(d,p)) is used to calculate the optimal configurations and IR spectra of the (HF) _m ·((CH₃)₂CO) _n molecular complexes (m = 1, 2, 4, 8, n = 1, 2) of different structure. The relative stability of the latter is studied. By comparing the calculated and experimental data, the composition (2:2 and 4:1) and structure of two types of HAs are determined.     

Structure of NR<Subscript>4</Subscript>BR-H<Subscript>2</Subscript>O and CoBr<Subscript>2</Subscript>-NR<Subscript>4</Subscript>BR-H<Subscript>2</Subscript>O solutions according to electronic and IR spectroscopy data

Absorption spectra of NR₄Br-H₂O and CoBr₂-NR₄Br-H₂O (R = Et, Bu) aqueous solutions were measured within the range of 1000–25000 cm⁻¹, and the influence of tetraalkylammonium cations on the equilibrium between cobalt octahedral and tetrahedral complexes was revealed. The specificity of hydration interactions in solutions under study in various concentration ranges and resulting from them difference in spectral characteristics were analyzed. Variously directed changes in positions of bands in the region of stretching vibrations, a composite frequency of 5200 cm⁻¹, and the first water overtone occurring due to the concentration variation were found.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

Solubility of <Emphasis Type="Italic">d</Emphasis>-elements salts in organic and aqueous-organic solvents: III. Influence of intermolecular association on solubility of cadmium bromide and iodide

Solubility in the systems CdX₂–H₂O–Solv (X = Br, I; Solv = dimethyl sulfoxide, N,N-dimethyl acetamide, N,N-dimethyl formamide, and 1,4-dioxane) at 25°C was measured by the isothermal saturation method. A relation between the shape of the solubility isotherm and the structure of the binary solvent depending on its composition was found. Positions of solubility maxima and isotherms inflection points in the most cases correlate with destruction of intermolecular associates formed by solvent components.     

Solid electrolytes based on CeO<Subscript>2</Subscript> for medium-temperature electrochemical devices

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices: electrolytic cells, oxygen sensors, and solid oxide fuel cells. In this work, studies are presented of the effect of the dopant cation radius and its concentration on the physico-chemical properties of the Ce_{1 − x} Ln _x O_{2 − δ} solid solutions (x = 0–0.20; Ln = La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb) and also of multicomponent solid solutions of Ce_{1 − x} Ln _x/2Ln′ _x/2O_{2 − δ} (x = 0–0.20; Ln = Sm, La, Gd and Ln′ = Dy, Nd, Y) and Ce_{1 − x − y} Sm _x M _y O_{2 − δ} (M = Ca, Sr, Ba) obtained using the solid-phase synthesis technique. Electric properties of the samples were studied in the temperature range of 623–1173 K and in the oxygen partial pressure range of 0.01–10⁻²² MPa. The values of oxygen critical pressure ( p_O2 ^* )\left( {p_{O_2 }^* } \right) are presented, at which the ionic and electron conductivity values are equal. The values were calculated on the basis of experimental dependences at 1023 K at the assumption that the ionic conductivity value is determined only by the dopant concentration and its effective ionic radius and is independent of the oxygen partial pressure.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

The synthesis and selected properties of Co<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript>

It has been demonstrated that Co₂V₂O₇ and InVO₄ react with each other forming a new compound of the Co₂InV₃O₁₁ formula, when their molar ratio is equal to 1:1, or among CoCO₃, In₂O₃ and V₂O₅, mixed at a molar ratio of 4:1:3. This compound melts incongruently at the temperature of 960±5°C, depositing crystals of InVO₄. It crystallizes in the triclinic system and the unit cell parameters amount to: a=0.6524(6) nm, b=0.6885(5) nm, c=1.0290(4) nm, α=96.5°, β=104.1°, γ=100.9°, Z=2. The phase equilibria being established in the Co₂V₂O₇–InVO₄ system over the whole components concentration range up to the solidus line were described.     

Structure of heteroassociates formed in the HF-(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>O liquid system

The aim of this work was to determine the structure of stable heteroassociates (HAs) with the stoichiometric ratios 1:2, 2:1, and 4:1 of molecules formed in the HF-(C₂H₅)₂O binary liquid system. The stretching frequencies of HF molecules found for each HA using a special procedure for processing IR spectra were compared with the calculated frequencies V HF of the stable molecular complexes (HF)_m ((C₂H₅)₂O)_n (m = 1, 2, 4, 8; n = 1, 2) with different topologies by the density functional method (B3LYP/6-31++G(d,p)). As a result, it was shown that the most stable (among H-bonded complexes with the same stoichiometric ratio of molecules) HAs HF((C₂H₅)₂O)₂, (HF)₄ ((C₂H₅)₂O)₂, and (HF)₈-((C₂H₅)₂O)₂ formed in HF solutions in diethyl ether. All of them had a cyclic structure and a common peculiarity of structure: only one lone electron pair of the oxygen atom of the (C₂H₅)₂O molecules is involved in hydrogen bonding.     

Influence of solvent structure on the aquation of <Emphasis Type="BoldItalic">trans</Emphasis>-[Ru(3-MePy)<Subscript>4</Subscript>Cl<Subscript>2</Subscript>] complex in mixed aqueous solvents

The kinetics of the solvolytic aquation of trans-[Ru (3-Me Py)₄Cl₂] was studied spectrophotometrically in water – isopropanol in the range (30–90% v/v), and water acetonitrile in the range (10–70% v/v), and in the temperature range 50–65 °C. Plots of log k versus the reciprocal of the relative permittivity and Grunwald–Winstien gave non-linear plots. This non-linearity is derived from a large differential effect of solvent structure between the initial and transition states. The plot of log k versus water concentration was also non linear; evidence for the presence of a S _N ¹ mechanism. However, extrema in the variation of enthalpy ΔH* and entropy ΔS* of activation correlate well with the extrema in physical properties of the mixtures which are related to changes in solvent structure. Linear plots of ΔH* versus ΔS* were obtained and the iso- kinetic temperature indicates that the reaction is entropy controlled.     

Effect of oxygen activity and water partial pressure to degradation rate of Ni cermet electrode contacting Zr<Subscript>0.84</Subscript>Y<Subscript>0.16</Subscript>O<Subscript>1.92</Subscript> electrolyte

The time curves of full polarization resistance of Ni cermet electrode modified with CeO_{2 − δ} additive were studied by means of impedance spectroscopy in binary gas mixtures x% H₂ + (100 − x)% H₂O, 10% CO + 90% CO₂ and multicomponent gas mixtures H₂ + CO₂ + H₂O + CO + Ar of various composition at the temperature of 900°C. The Ni cermet electrode degradation rate in binary gas mixtures H₂ + H₂O was shown to increase sharply at the partial water pressure over 45%. The Ni cermet electrode degradation rate in the mixture of 10% CO + 90% CO₂ was significantly lower than that in 10% H₂ + 90% H₂O. The major changes in the electrode characteristics upon long exposure in working conditions were accounted for by changes in the high-frequency partial polarization resistance. In the course of long testing, the electrode microstructure was not significantly changed. In the presence of hydrogen-containing components (H₂ and H₂O), the carbon-containing components (CO and CO₂) were shown to make an insignificant contribution to the current generation processes in Ni cermet electrode. It was suggested that strong degradation of Ni cermet electrode was caused by poisoning its reaction sites with strongly linked adsorption forms of water (hydroxyls) at the positive charge of electrode.     

Solubility of <Emphasis Type="Italic">d</Emphasis>-element salts in organic and aqueous–organic solvents: II. Effect of halocomplex formation on solubility of cobalt bromide and chloride and nickel chloride

Solubility of salts in the systems MCl₂–H₂O–Solv (M = Co, Ni) and CoBr₂–H₂O–Solv (Solv = dimethyl sulfoxide, dimethyl formamide, and dimethyl acetamide) at 25°C was measured experimentally. Dominating species of cobalt and nickel halides existing in various concentration regions were identified by analysis of electron absorption spectra. It was shown that the major factor defining solubility is the interaction of halocomplexes of metal ions with solvent molecules.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Computational study on the reaction of CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>CH<Subscript>3</Subscript> with OH radical: mechanism and enthalpy of formation

The reaction mechanism of CH₃SCH₂CH₃ with OH radical is studied at the CCSD(T)/6-311+G(3df,p)//MP2/6-31+G(2d,p) level of theory. Three hydrogen abstraction channels, one substitution process and five addition–elimination channels are identified in the title reaction. The result shows hydrogen abstraction is dominant. Substitution process and addition–elimination reactions may be negligible because of the high barrier heights. Enthalpies of formation [ \Updelta_f H_{(298.15\textK)}^o \Updelta_{f} H_{(298.15{\text{K}})}^{o} ] of the reactants and products are evaluated at the CBS-QB3, G3 and G3MP2 levels of theory, respectively. It is found that the calculated enthalpies of formation by the aforementioned three methods are in consistent with the available experimental data. Rate constants and branching ratios are estimated by means of the conventional transition state theory with the Wigner tunneling correction over the temperature range of 200–900 K. The calculation shows that the formations of P1 (CH₂SCH₂CH₃ + H₂O) and P2 (CH₃SCHCH₃ + H₂O) are major products during 200–900 K. The three-parameter expressions for the total rate constant is fitted to be k_\texttotal = 1.45 ×10 ^{- 21} T^3.24 exp( - 1384.54/T) k_{\text{total}} = 1.45 \times 10^{ - 21} T^{3.24} \exp ( - 1384.54/T) cm³ molecule⁻¹ s⁻¹ from 200 to 900 K.     

Volumetric and Viscometric Studies on Sodium Nitrate and Potassium Nitrate in Aqueous and H<Subscript>2</Subscript>O-urea Solutions

Summary.  Density and viscosity of NaNO₃ and KNO₃ in aqueous and in H₂O-urea solutions were determined as a function of electrolyte concentrations at 308, 313, 318, 323, and 328 K, respectively. The apparent molal volume (φ _v ) of the electrolytes were found to be linear functions of the square root of the solute molality (b). The φ _v and data were fitted to the Masson equation [1] by the least square method to obtain the apparent molar volume at infinite dilution (φ _v ^{^}), which is practically equal to the partial molar volume . The viscosity coefficients A and B were calculated on the basis of the viscosity of the solutions and the solvent concerned using the Jones–Dole [2] equation. The activation parameters for viscous flow (ΔG ^≠, ΔS ^≠, and ΔH ^≠) were calculated according to Eyring [3]. The values of for the two systems were also calculated from B-coefficient data. The results were found to be of opposite nature in the two electrolyte systems. Where sodium nitrate showed structure making behaviour both in aqueous and in H₂O-urea solutions, KNO₃ showed structure breaking behaviour in aqueous solutions and structure making behaviour in 5 molal H₂O-urea solutions in the studied temperature range. The behaviour of these two electrolytes in aqueous binary and in aqueous-urea ternary systems are discussed in terms of charge, size, and hydrogen bonding effects. Corresponding author. E-mail: chemistry_ru@yahoo.com Received January 24, 2002; accepted (revised) April 5, 2002     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003