SAXS experiments on gel-spun polyethylene fibers

The properties of gel-spun polyethylene fibers hot-drawn to the maximum draw ratio depend on the spinning conditions. Different spinning conditions result in two types of structure in the paraffin oil containing fibers: an isotropic lamellar structure or a shish-kebab structure. Meridional SAXS experiments can identify the structure present. After extraction, these structures are still present but can be detected only in a more indirect way by SAXS experiments because of an excessive contribution of void scattering. During hot-drawing both structures are transformed into a more fibrillar structure. The shish-kebab structures can be drawn only to relatively low hot-draw ratios with an incomplete transformation of the lamellar overgrowth into the fibrils, as demonstrated by the presence of a meridional SAXS maximum/shoulder. This leads to relatively weak fibers. Lamellar structures can be drawn to high draw ratios by chain unfolding. A nearly complete transformation of the lamellae into fibrils is obtained and the fibers have excellent properties. The information about the morphology obtained by SAXS, DSC, WAXS, and SEM can be used to establish a relation between morphology and properties.     

Collagen adsorption and structure on polymer surfaces observed by atomic force microscopy

The structure and adsorption patterns of type I and type III collagen were imaged on various polymer substrates with atomic force microscopy. Type I collagen had higher adsorption on polystyrene than on a series of polymethacrylates and formed a network of tightly, interwoven strands. Upon adsorption to different polymethacrylates, with varying side chain lengths, the collagen molecules formed long, branching fibrils. Types I and III collagen had different adsorption patterns, in some cases, on the identical substrate material. For example, instead of forming a tightly packed network, type III forms long, branching fibers on the polystyrene surface. On other materials, such as poly(n-butyl methacrylate), the two types of collagen showed similar adsorption pattern and structure. Adsorbed collagen was also imaged on various blends of polystyrene and polymethacrylates to determine how the polymer surface chemical structure and surface topography mediates protein adsorption.     

On the influence of surfactants on the adsorption of polysaccharide-based polymers on cotton studied by means of fluorescence spectroscopy

In this study, we examined the influence of surfactants on the adsorption of polymers on cotton fibers. The extent of polymer adsorption on cotton was determined directly by means of fluorescence spectroscopy using fluorescently labeled polymers. The investigation of polymer adsorption in the presence of different types of surfactants and for a large range of differently structured polymers allows us to obtain a rather general picture of this important issue. Systematic relationships between the presence of surfactant and the type of polymer can be deduced but cannot be cast in simple terms such as electrostatic interaction but instead depend on the detailed interaction between the surfactant and polymer both in solution and adsorbed on the cotton surface. A particularly complex situation arises for the case of oppositely charged surfactant and polymer because of the possibility of precipitate formation. The study of such complex systems not only is of scientific interest but also is of great commercial interest because both polymers and surfactants are parts of detergent formulations and cotton is one of the most abundantly used materials for fabrics.     

Dynamic Bonds Mediate π-π Interaction via Phase Locking Effect for Enhanced Heat Resistant Thermoplastic Polyurethane

Stimulus-responsive polymers containing dynamic bonds enable fascinating properties of self-healing, recycling and reprocessing due to enhanced relaxation of polymer chain/network with labile linkages. Here, we study the structure and properties of a new type of thermoplastic polyurethanes (TPUs) with trapped dynamic covalent bonds in the hard-phase domain and report the frustrated relaxation of TPUs containing weak dynamic bond andπ-πinteraction in hard segments. As detected by rheometry, the aromatic TPUs with alkyl disulfide in the hard segments possess the maximum network relaxation time in contrast to those without dynamic bonds and alicyclic TPUs. In situ FTIR and small-angle scattering results reveal that the alkyl disulfide facilitates stronger intermolecular interaction and more stable micro-phase morphology inπ-πinteraction based aromatic TPUs. Molecular dynamics simulation for pure hard segments of model molecules verify that the presence of disulfide bonds leads to strongerπ-πstacking of aromatic rings due to both enhanced assembling thermodynamics and kinetics. The enhancedπ-πpacking and micro-phase structure in TPUs further kinetically immobilize the dynamic bond. This kinetically interlocking between the weak dynamic bonds and strong molecular interaction in hard segments leads to much slower network relaxation of TPU. This work provides a new insight in tuning the network relaxation and heat resistance as well as molecular self-assembly in stimulus-responsive dynamic polymers by both molecular design and micro-phase control toward the functional applications of advanced materials.     

Ions in water: the microscopic structure of concentrated NaOH solutions

A neutron diffraction experiment with isotopic H/D substitution on four concentrated NaOH/H(2)O solutions is presented. The full set of partial structure factors is extracted, by combining the diffraction data with a Monte Carlo simulation. These allow to investigate both the changes of the water structure in the presence of ions and their solvation shells. It is found that the interaction with the solute affects the tetrahedral network of hydrogen bonded water molecules in a manner similar to the application of high pressure to pure water. The solvation shell of the OH(-) ions has an almost concentration independent structure, although with concentration dependent coordination numbers. The hydrogen site coordinates a water molecule through a weak bond, while the oxygen site forms strong hydrogen bonds with a number of molecules that is on the average very close to four at the higher water concentrations and decreases to about three at the lowest one. The competition between hydrogen bond interaction and Coulomb forces in determining the orientation of water molecules within the cation solvation shell is visible in the behavior of the g(NaHw)(r) function     

Synthesis of proline derivatives of bile acids and their evaluation as organocatalysts in the asymmetric direct aldol reaction

A new family of bile acid derived organocatalysts was obtained by linking l- or d-proline to amino derivatives of cholic and deoxycholic acids, which were used to promote the asymmetric direct aldol reaction between acetone and 4-nitrobenzaldehyde. Both the activity and enantioselectivity of the organocatalytic systems were dependent not only on the position of the proline moiety on the cholestanic backbone and its absolute configuration, but also on the presence of free hydroxyl group on the steroidal skeleton. The cholic acid derivative bearing a d-prolinamide moiety at the 12-position and free hydroxyl groups at the 3- and 7-positions emerged as the best organocatalytic system giving complete conversion of the substrate, even when using only 2% of catalyst loading and ee up to 80%.     

Liquid structure of room-temperature ionic liquid, 1-Ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide

The liquid structure of 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) has been studied by means of large-angle X-ray scattering (LAXS), (1)H, (13)C, and (19)F NMR, and molecular dynamics (MD) simulations. LAXS measurements show that the ionic liquid is highly structured with intermolecular interactions at around 6, 9, and 15 A. The intermolecular interactions at around 6, 9, and 15 A are ascribed, on the basis of the MD simulation, to the nearest neighbor EMI(+)...TFSI(-) interaction, the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions, and the second neighbor EMI+...TFSI(-) interaction, respectively. The ionic liquid involves two conformers, C(1) (cis) and C(2) (trans), for TFSI(-), and two conformers, planar cis and nonplanar staggered, for EMI(+), and thus the system involves four types of the EMI(+)...TFSI(-) interactions in the liquid state by taking into account the conformers. However, the EMI(+)...TFSI(-) interaction is not largely different for all combinations of the conformers. The same applies alsoto the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions. It is suggested from the 13C NMR that the imidazolium C(2) proton of EMI(+) strongly interacts with the O atom of the -SO(2)(CF(3)) group of TFSI(-). The interaction is not ascribed to hydrogen-bonding, according to the MD simulation. It is shown that the liquid structure is significantly different from the layered crystal structure that involves only the nonplanar staggered EMI(+) and C(1) TFSI(-) conformers.     

Gelation dynamics and gel structure of fibrinogen

Gelation dynamics and gel structure of fibrinogen induced by serine protease, thrombin, was investigated by light scattering, real space observation using confocal laser scanning microscopy (CLSM), and turbidity. Effects of additives, such as (linear) saccharides, glucose to dextran, and cyclodextrin, were studied focusing on the interaction with fibrin(ogen) and thrombin. Light scattering measurement was ascertained to be able to characterize the gelation process and growth kinetics. Stepwise (two-step) gelation process, formation of fibrin monomers and protofibrils followed by the lateral aggregation to form fibrin fibers and gel network, was clearly ascertained. Gelation point could be characterized quantitatively. At the gelation point, dynamic light scattering exhibited a self-similar nature of the fibrin gel network, and the fractal dimension was evaluated in good accordance with the reconstructed 3D image of gel network by CLSM. The interaction between the additives and fibrin(ogen) and thrombin were studied by the inhibition test using synthesized substrate. Temporal variation of microstructure of fibrin gel network (lateral fiber growth) was investigated by turbidity in detail. Addition of saccharides affects significantly the network formation as revealed by turbidity. The interaction of dextran with fibrin fibers was examined by fluorescence microscopy, too, and the characteristic spatial distribution was observed.     

Selective Interaction of Dopamine with the Self‐Assembled Fibrillar Network of a Molecular Hydrogel Revealed by STD‐NMR

A molecular hydrogel formed by a derivative of L ‐valine with pendant isonicotinoyl moieties interacts selectively with protonated dopamine in the presence of related compounds such as 3‐methylcatechol, and protonated or neutral phenethylamine. A two‐point interaction with the gel fibers is postulated to explain the results. The conclusions are obtained from nuclear magnetic resonance saturation transfer experiments (STD‐NMR), illustrating how this technique is perfectly suited to monitor the interaction of substrates with the fibrillar network of a molecular gel.     

Imitation of biomembranes on the basis of cholic acid and endogenic thermostable protein complex in biopartitioning micellar chromatography

The structure of biomembranes was imitated by introducing nonionic surfactant polyoxyethylene (23) dodecylether, cholic acid and endogenic thermostable protein complex (14–65 kDa) into the mobile phase. The influence of concentration of these additives on the retention of the model compounds was studied. The competing interaction of cholic acid and endogenic thermostable protein complex in the lipid bilayer model was revealed on the basis of chromatographic data. The values of efficiency of the chromatographic column regarding solutes were increased by addition of endogenic thermostable protein complex to the mobile phase containing Brij‐35 and cholic acid. Copyright © 2011 John Wiley & Sons, Ltd.     

Interaction between microfibrillar cellulose fines and fibers: influence on pulp qualities and paper sheet properties

Due to the high potential of cellulose nanoparticles in composite materials and for both fundamental and technological considerations, we investigated the interaction between microfibrillar cellulose and fibers. The contribution to the paper properties of fines added to a pulp suspension was determined. The impact of various proportions of fines added to a softwood kraft pulp on the paper strength and how they affected porosity and density was evaluated. The respective effects of dried fines (dead fines), originating from paper or board degradation, and the newly formed secondary fines (fresh fines) generated during refining were examined. The nature of the bonding between the fines and the fibers versus physical retention was characterized in the pulp suspension. For the first time the respective parts in the interaction of hydrogen bonds and mechanical associations were demonstrated and quantified. The amount of H-bonded fresh fines exceeded that of dead fines by more than 30 %. The results revealed that, for both types, the amount of H-bonded fines reached a threshold, independently of the proportion of fines added to the fibers. Addition of fines significantly affected the porosity of papers, fresh fines decreasing porosity more readily than dead fines. All the results are convergent to indicate that fresh fines penetrate more evenly and more deeply into the fiber network and induce better bonding that produces a closure of the fiber mat structure. They also demonstrate that incorporating an optimal proportion of fresh cellulose fines in fiber networks can bring significant improvement to the final composite material.     

Preparation and Properties of Chitosan/Konjac Glucomannan Blend Fibers

Chitosan and konjac glucomannan (KGM) blend fibers were prepared by spinning their solution through a viscose‐type spinneret into a coagulating bath containing aqueous sodium hydroxide and ethanol. The structure and properties of the blend fibers were studied with the aids of infrared spectra (IR), scanning electron micrography (SEM) and X‐ray diffraction (XRD). The structure analysis indicated that there were strong interaction and good miscibility between the chitosan and KGM molecule which resulted from intermolecular hydrogen bonds. Mechanical properties and water‐retention properties were measured. Through controlling blend conditions, blend fibers can obtain better mechanical properties than the pure chitosan fiber. The water‐retention values (WRV) of blend fibers increase as the amount of KGM is raised. The fibers treated with alcoholic solution of acetic acid have good antibacterial activity to Staphylococcus aureus.     

Strength of Calpha-H...O=C hydrogen bonds in transmembrane proteins

A large number of Calpha-H...O contacts are present in transmembrane protein structures, but contribution of such interactions to protein stability is still not well understood. According to previous ab initio quantum calculations, the stabilization energy of a Calpha-H...O contact is about 2-3 kcal/mol. However, experimental studies on two different Calpha-H...O hydrogen bonds present in transmembrane proteins lead to conclusions that one contact is only weakly stabilizing and the other is not even stabilizing. We note that most previous computational studies were on optimized geometries of isolated molecules, but the experimental measurements were on those in the structural context of transmembrane proteins. In the present study, 263 Calpha-H...O=C contacts in alpha-helical transmembrane proteins were extracted from X-ray crystal structures, and interaction energies were calculated with quantum mechanical methods. The average stabilization energy of a Calpha-H...O=C interaction was computed to be 1.4 kcal/mol. About 13% of contacts were stabilizing by more than 3 kcal/mol, and about 11% were destabilizing. Analysis of the relationships between energy and structure revealed four interaction patterns: three types of attractive cases in which additional Calpha-H...O or N-H...O contact is present and a type of repulsive case in which repulsion between two carbonyl oxygen atoms occur. Contribution of Calpha-H...O=C contacts to protein stability is roughly estimated to be greater than 5 kcal/mol per helix pair for about 16% of transmembrane helices but for only 3% of soluble protein helices. The contribution would be larger if Calpha-H...O contacts involving side chain oxygen were also considered.     

Novel channel structure of bile acid-guest inclusion complex formed between ursodeoxycholic acid and phenanthrene

The crystal structure of inclusion complex between ursodeoxycholic acid (UDCA), and phenanthrene has been determined. UDCA molecules formed hydrogen bond network to provide the channel structure along b axis, and phenanthrene molecules were accommodated in the cavity with a stoichiometry of 1 : 1 molar ratio. The channel structure observed in the UDCA-phenanthrene complex was significantly different from that of inclusion complex previously reported for deoxycholic acid (DCA) and cholic acid (CA). Because of the mesh-like hydrogen bond network, channel framework of UDCA could have less flexibility than that of DCA and CA. The difference of molecular state of phenanthrene was clearly observed in solid-state fluorescence measurement.     

The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes

A new type of nanocellulosic material has been prepared by high-pressure homogenization of carboxymethylated cellulose fibers followed by ultrasonication and centrifugation. This material had a cylindrical cross-section as shown by transmission electron microscopy with a diameter of 5-15 nm and a length of up to 1 microm. Calculations, using the Poisson-Boltzmann equation, showed that the surface potential was between 200 and 250 mV, depending on the pH, the salt concentration, and the size of the fibrils. They also showed that the carboxyl groups on the surface of the nanofibrils are not fully dissociated until the pH has reached pH = approximately 10 in deionized water. Calculations of the interaction between the fibrils using the Derjaguin-Landau-Verwey-Overbeek theory and assuming a cylindrical geometry indicated that there is a large electrostatic repulsion between these fibrils, provided the carboxyl groups are dissociated. If the pH is too low and/or the salt concentration is too high, there will be a large attraction between the fibrils, leading to a rapid aggregation of the fibrils. It is also possible to form polyelectrolyte multilayers (PEMs) by combining different types of polyelectrolytes and microfibrillated cellulose (MFC). In this study, silicon oxide surfaces were first treated with cationic polyelectrolytes before the surfaces were exposed to MFC. The build-up of the layers was monitored with ellipsometry, and they show that it is possible to form very well-defined layers by combinations of MFC and different types of polyelectrolytes and different ionic strengths of the solutions during the adsorption of the polyelectrolyte. A polyelectrolyte with a three-dimensional structure leads to the build-up of thick layers of MFC, whereas the use of a highly charged linear polyelectrolyte leads to the formation of thinner layers of MFC. An increase in the salt concentration during the adsorption of the polyelectrolyte results in the formation of thicker layers of MFC, indicating that the structure of the adsorbed polyelectrolyte has a large influence on the formation of the MFC layer. The films of polyelectrolytes and MFC were so smooth and well-defined that they showed clearly different interference colors, depending on the film thickness. A comparison between the thickness of the films, as measured with ellipsometry, and the thickness estimated from their colors showed good agreement, assuming that the films consisted mainly of solid cellulose with a refractive index of 1.53. Carboxymethylated MFC is thus a new type of nanomaterial that can be combined with oppositely charged polyelectrolytes to form well-defined layers that may be used to form, for example, new types of sensor materials.     

Chiral bis(amino alcohol)oxalamide gelators-gelation properties and supramolecular organization: racemate versus pure enantiomer gelation

Four new chiral bis(amino alcohol)oxalamides (1-4: amino alcohol=leucinol, valinol, phenylglycinol, and phenylalaninol, respectively) have been prepared as low-molecular-weight organic gelators. Their gelation properties towards various organic solvents and mixtures were determined and these were then compared to related bis(amino acid) oxalamide gelators. Spectroscopic (FTIR, (1)H NMR) and X-ray diffraction studies revealed that the primary organization motif of (S,S)-1 and racemate 1 (rac-1) in lipophilic solvents involved the formation of inverse bilayers. The X-ray crystal structure of (S,S)-1 also shows this type of bilayer organization. The crystal structure of rac-2 reveals meso bilayers of hydrogen-bonded aggregates. Within the bilayers formed, the gelator molecules are connected by cooperative hydrogen bonding between oxalamide units and OH groups, while the interbilayer interactions are realized through lipophilic interactions between the iBu groups of leucinol. Oxalamide meso-1 lacks any gelation ability and crystallizes in monolayers. In dichloromethane rac-1 forms an unstable gel; this is prone to crystallization as a result of the formation of symmetrical meso bilayers. In contrast, in aromatic solvents rac-1 forms stable gels; this indicates that enantiomeric bilayers are formed. Oxalamide rac-1 is capable of gelling a volume of toluene three times larger than (S,S)-1. A tranmission electron microscopy investigation of rac-1 and (S,S)-1 toluene gels reveals the presence of thinner fibers in the former gel, and, hence, a more compact network that is capable of immobilizing a larger volume of the solvent. The self-assembly of these types of gelator molecules into bilayers and subsequent formation of fibrous aggregates can be explained by considering the strength and direction of aggregate forces (supramolecular vectors) in three-dimensional space.     

Imitation of artificial membrane system via mobile phases with Tween-80 and cholic acid in biopartitioning micellar chromatography

The chromatographic behaviour of compounds of biomedical significance was studied using micellar mobile phases modified with polyoxyethylene (20) sorbitan monooleate (Tween-80). The influence of the surfactant within the 0.75-4% concentration range on the retention factor of model compounds was investigated. The biological surfactant cholic acid was introduced into the mobile phases in order to approach to the structure of natural membranes, viz. erythrocyte and cytoplasmatic membranes. It was found that curves of dependence of retention factor vs concentration of Tween-80 in the absence and presence of cholic acid in the mobile phase considerably diverge with one another, especially in the 2-3% concentration range of Tween-80 using C18-type support. Increasing the concentration of Tween-80 resulted in the increase of retention factors using phenyl-coated stationary phase.     

Thermal and rheological characterization of cellulose spinning dopes modified with nanosilica and antibacterial agents

The present study concerns cellulose spinning solutions prepared with the use of the organic solvent N‐methylmorpholine‐N‐oxide (NMMO). These solutions were modified with two types of antibacterial agents: an inorganic agent zirconium‐silver phosphate (Alphasan®) and an organic one Triclosan (Irgasan® DP300). Such spinning solutions allow to obtain antibacterial fibers of the Lyocell type. A nanomodifier, colloidal silica (Ludox SM 30®), was also incorporated into the spinning solutions as an additional component to increase the antibacterial activity of fibers. The effect of the compounds incorporated into the spinning solutions on their rheological and thermal properties was assessed by means of the oscillatory method and differential scanning calorimetry (DSC), respectively. The incorporation of nanosilica exerts a clear influence on the rheological properties of spinning solutions, whereas this effect is negligible in the simultaneous presence of nanosilica and antibacterial agents. The results of thermal measurements show that nanosilica affects the crystallization of the solutions examined. Depending on the type of antibacterial agent, nanosilica brings about either a delay or acceleration of the crystallization of the modified solutions. The effect of nanosilica can be explained in terms of interactions between hydroxyl groups occurring on the surface of silica nanoparticles and NMMO molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydrogen sensors based on conductivity changes in polyaniline nanofibers

Hydrogen causes a reversible decrease in the resistance of a thin film of camphorsulfonic acid doped polyaniline nanofibers. For a 1% mixture of hydrogen in nitrogen, a 3% decrease in resistance is observed (DeltaR/R = -3%). The hydrogen response is completely suppressed in the presence of humidity. In contrast, oxygen does not inhibit the hydrogen response. A deuterium isotope effect on the sensor response is observed in which hydrogen gives a larger response than deuterium: (DeltaR/R)H/(DeltaR/R)D = 4.1 +/- 0.4. Mass sensors using nanofiber films on a quartz crystal microbalance also showed a comparable deuterium isotope effect: DeltamH/DeltamD = 2.3 +/- 0.2 or DeltanH/DeltanD = 4.6 +/- 0.4 on a molar basis. The resistance change of polyaniline nanofibers is about an order of magnitude greater than conventional polyaniline, consistent with a porous, high-surface-area nanofibrillar film structure that allows for better gas diffusion into the film. A plausible mechanism involves hydrogen bonding to the amine nitrogens along the polyaniline backbone and subsequent dissociation. The inhibitory effect of humidity is consistent with a stronger interaction of water with the polyaniline active sites that bind to hydrogen. These data clearly demonstrate a significant interaction of hydrogen with doped polyaniline and may be relevant to recent claims of hydrogen storage by polyaniline.     

核-壳结构壳聚糖/聚乙烯醇-聚碳酸亚丙酯超细纤维的制备

利用同轴电纺丝技术制备出具有核-壳结构的壳聚糖/聚乙烯醇-聚碳酸亚丙酯电纺丝纤维,考察了溶剂复配对成纤的影响,采用扫描电镜和透射电镜对纤维的形貌、结构、直径分布等进行了探索,并在优化的工艺条件下,将羟基磷灰石负载在内层结构中.研究表明,采用氯仿/N,N-二甲基甲酰胺(1/1)复配溶剂可有效避免聚合物溶液在喷丝口处的凝结现象.同单纺纤维相比,核壳结构的纤维直径分布较宽,纤维壳层和核层界限清晰;红外谱图分析证明羟基磷灰石可负载在纤维的核结构中.