Adsorption and structural properties of channel-like and cage-like organosilicas

Channel-like and cage-like mesoporous silicas, SBA-15 (P6mm symmetry group) and SBA-16 (Im3m symmetry group), were modified by introducing single ureidopropyl surface groups, mixed ureidopropyl and mercaptopropyl surface groups, and single bis(propyl)disulfide bridging groups. These hexagonal and cubic organosilicas were prepared under acidic conditions via co-condensation of tetraethyl orthosilicate (TEOS) and proper organosilanes using poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) amphiphilic block copolymer templates, P123 (EO₂₀PO₇₀EO₂₀) and F127 (EO₁₀₆PO₇₀EO₁₀₆). The modified SBA-15 and SBA-16 materials were synthesized by varying the molar ratio of organosilane to TEOS in the initial synthesis gel. The removal of polymeric templates, P123 and F127, was performed with ethanol/hydrochloric acid solution. In the case of SBA-15 the P123 template was fully extracted, whereas this extraction process was less efficient for the removal of F127 template from the SBA-16-type organosilicas; in the latter case a small residue of F127 was retained. The adsorption and structural properties of the resulting materials were studied by nitrogen adsorption-desorption isotherms at −196^∘C (surface area, pore size distribution, pore volumes), powder X-Ray diffraction, CHNS elemental analysis and high-resolution thermogravimetry. The structural ordering, the BET specific surface area, pore volume and pore size decreased for both channel-like and cage-like mesoporous organosilicas with increasing concentration of incorporated organic groups.     

Microcalorimetric Study on Interaction between PEO‐PPO‐PEO Triblock Copolymers and Sodium Dodecyl Trioxyethylenated Sulfonate in Aqueous Solutions

Interactions between three triblock copolymers of poly (ethylene oxide)‐poly (propylene oxide)‐poly (ethylene oxide), EO_mPO_nEO_m, and the ionic surfactant sodium dodecyl trioxyethylenated sulfonate, C₁₂E₃S, in aqueous solutions were investigated with titration microcalorimetry at 293.15 K. Values of enthalpies, entropies, and free energies of interaction have been derived. The thermodynamic data indicate that interactions between EO_mPO_nEO_m and C₁₂E₃S decrease with the increase of m/n.     

Highly Porous Silica Monoliths from Ethyl (L)-Lactate Modified Silanes

Summary. A new type of silica precursor was synthesized by (trans)alkoxylation of alkoxy- and chlorosilanes with ethyl (L)-lactate. This novel ethyl lactate modified silane was hydrolyzed and condensed in the presence of a non-ionic surfactant – poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymer (P123) – to give monolithic silica gels. The wet gels were dried using two different drying techniques resulting in crack-free monoliths: a) supercritical drying with CO₂ to yield a porous inorganic material and b) surface silylation with trimethylchlorosilane to yield an inorganic–organic nanocomposite material. The obtained porous gels were characterized by different techniques including thermal analysis, nitrogen sorption, and electron microscopy (TEM, SEM).     

Salt‐Induced Micellization of Pluronic F88 in Water

The effect of potassium chloride on the micellization of a poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymer (Pluronic F88: EO₁₀₃PO₃₉EO₁₀₃.) in water was studied by fluorescence, FTIR, ¹H NMR, dynamic light scattering, and dye solubilization. The critical micellization temperature (CMT) values of the copolymer decreased with an increase of KCl concentration while micellar core gets progressively dehydrated. The results reveal the leading role of salt‐water interaction in promoting the micellization of PEO‐PPO‐PEO copolymer by the addition of salt. No significant micellar growth was seen even at temperatures close to cloud point.     

Mono- and Di-valent Salts as Modifiers of PEO-PPO-PEO Block Copolymer Interactions with Silica Nanoparticles in Aqueous Dispersions

Colloidal stabilization of nanoparticle dispersions is central to applications including coatings, mineral extraction, and dispersion of oil spills in oceanic environments, which often involves oil-mineral-aggregates (OMAs). We have an ongoing interest in the modulation of amphiphile micellization and adsorption behavior in aqueous colloidal dispersions in the presence of various additives. Here we evaluate the effect of added salts CaCl₂, MgCl₂, and NaCl on the micellization and adsorption behavior of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer Pluronic P105 (EO₃₇PO₅₆EO₃₇). In 0.10 wt% silica nanoparticle (10.6 nm average diameter) dispersion, adsorbed block copolymer layer formation begins at a critical surface micelle concentration (csmc) of 0.02 wt%, well below the critical micellization concentration of Pluronic P105 in water. Dye solubilization experiments demonstrate an increase in the csmc upon addition of each salt. Each added salt reaches a level of maximum effectiveness in its ability to disfavor Pluronic P105 adsorption at the silica surface. These peak levels occur at concentrations of 0.005, 0.03, and 0.05 M for CaCl₂, MgCl₂, and NaCl, respectively, in the presence of 0.10 wt% silica nanoparticles. We explain these results in the context of an electrostatic displacer mechanism and discuss possible connections to OMA-dispersant formation.     

The influence of the compatibility of plasticizers with polymer ionic conductors on ionic conduction

The influence of the compatibility of plasticizers on the aggregated structure and the ion-conductive behavior of poly(ethylene oxide)/lithium methoxy di (ethyleneoxy) phenylsulfonate (EO₂PSLi) complex were studied using two plasticizers with different polarity, γ-butyrolactone (BL) and 2,5-di(methyl diglycol)-1,4;3,6-dianhydrous sorbitol ether (DGS), a novel pincer-like plasticizer synthesized in this paper. The DGS can effectively destroy the PEO crystalline phase in PEO/EO₂PSLi complex and increase the amorphous area in which Li⁺ cations transport, depending on polymeric segmental movement. However, in BL-plasticized PEO/EO₂PSLi complex, the highly polar BL hardly disrupts PEO crystals and only forms a BL-rich phase, a kind of liquid electrolyte tunnel in which Li⁺ mainly transfers. Received: 2 September 1997 / Accepted: 14 January 1998     

High-Yield Synthesis of Gold Microplates Using Amphiphilic Block Copolymers: Are Lyotropic Liquid Crystals Required?

Summary : High-yield synthesis of gold microplates is achieved through autoreduction of hydrogen tetrachloroaureate (III) hydrate (HAuCl₄ · 3H₂O) in aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer (Pluronic L64, EO₁₃PO₃₀EO₁₃) at ambient conditions, in the absence of added energy, reductant, or other surfactants. The formation by the amphiphilic block copolymer of lyotropic liquid crystals (e.g., ordered cylindrical/hexagonal or lamellar phases) is not required for templating the formation of such microplates.     

Room temperature synthesis of Ti-SBA-15 from silatrane and titanium-glycolate and its catalytic performance towards styrene epoxidation

A novel room temperature sol–gel synthesis of Ti-SBA-15 is described using moisture stable silatrane and titanium glycolate precursors, and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer (EO₂₀PO₇₀EO₂₀) as the structure directing agent. Catalyst performance was optimized by systematically investigating the influence of acidity, reaction time and temperature, and titanium loading. Small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) showed well-ordered 2D mesoporous hexagonal structures, while N₂ adsorption/desorption measurements yielded high surface areas (up to 670 m²/g), with large pore diameters (5.79 nm) and volumes (0.83 cm³/g). Diffuse reflectance UV–visible spectroscopy (DRUV) was found that tetravalent titanium as Ti⁴⁺O₄ tetrahedra were incorporated in the framework through displacement of Si⁴⁺O₄ after calcination (550°C/6 h) to loadings of 7 mol% Ti without perturbation of the ordered mesoporous structure, or decoration by extra-framework anatase containing Ti⁴⁺O₆ octahedra. The catalytic activity and selectivity of styrene epoxidation using hydrogen peroxide (H₂O₂) showed that the conversion of styrene increases significantly at higher titanium contents. The only products of this reaction were styrene oxide and benzaldehyde, with selectivity of 34.2 and 65.8%, respectively, at a styrene conversion of 25.8% over the 7 mol% Ti-SBA-15 catalyst. Beyond this titanium loading, anatase is deposited on the framework and catalytic activity degrades. The performance of the new catalyst is also shown to be superior to conventional materials produced by incipient wetness impregnation where Ti resides on the surface of SBA-15, giving a styrene conversion of 11.9% under identical reaction conditions.     

纳米TiO2介孔薄膜的模板组装制备研究

以TiCl₄为无机前驱体、三嵌段高分子共聚物EO₂₀PO₇₀EO₂₀为模板剂，在非水条件下制备了有序的锐钛矿TiO₂纳米晶介孔薄膜。通过热重-差热（TG-DTA）分析、X射线衍射（XRD）分析、原子力显微观察（AFM）及N₂吸附-脱附等测试对样品进行了表征。结果表明，薄膜具有均一的大介孔孔径（～10 nm），其BET比表面积为150 m²·g^-1，薄膜较宽的无机壁厚显著提高了介孔结构的热稳定性。通过红外（IR）光谱分析考察了溶胶-凝胶过程中发生的物理化学变化。在对薄膜表面形貌进行AFM观察的基础上初步探讨了嵌段共聚物EO₂₀PO₇₀EO₂₀对薄膜孔结构形成的导向机理。     

ADSORPTION OF NONIONIC SURFACTANTS ON LATEXES

Adsorption isotherms of ethoxylated nonylphenols on poly(styrene) and poly(vinyl chloride) latexes have been measured. The isotherms all reach a limiting adsorption at concentrations somewhat higher than the critical micellar concentrations of the surfactants. The relative affinity of the surfactants to the latex surfaces was found to decrease with increased ethylene oxide chain length. Analysis of the isotherms indicates some affinity of the ethylene oxide chain to the latex surface. This affinity may possibly be attributed to the presence of surface carboxylic groups

Some of the isotherms were obtained using the serum replacement technique developed by S.M. Ahmed et. al. (S.M. Ahmed, M.S. El-Aasser, G.H. Pauli, G.W. Poehlein and J.W. Vanderhoff, J. Coll. Interface Sci., 73 388 (1980). In the application of this technique to the adsorption of nonionic surfactants it was found that polydispersity of the surfactant plays an important role since surfactant species with high affinity to the latex surface will continuously replace other species with lower affinity.     

Soft-templating synthesis and adsorption properties of mesoporous carbons with embedded silver nanoparticles

Mesoporous carbons containing silver nanoparticles have been successfully synthesized under acidic conditions by employing resorcinol and formaldehyde as carbon precursors and triblock copolymer EO₁₀₁PO₅₆EO₁₀₁ (Lutrol F127) as a soft template. Silver nanoparticles of ∼90 nm were added to the synthesis mixture to achieve 10 wt% and 20 wt% of Ag loading in the carbon. Also, tetraethyl orthosilicate (TEOS) was introduced to the system in order to improve adsorption properties of the silver-carbon composites and to reinforce its structure. The resulting carbons with incorporated silver nanoparticles featured high surface areas, large total pore volumes and primary mesopores in the range between ∼6–7 nm.     

Thermodynamics and Fluorescence Spectra of 1,10-Phenanthroline in Micelles of Poly (Ethylene Oxide)-Type Nonionic Surfactant

The distribution of 1,10-phenanthroline (phen) in micellar solutions of the nonionic surfactants Triton X and C₁₂E _n with varying poly (ethylene oxide) chain lengths has been studied by potentiometry, calorimetry, and fluorometry at 298 K. Micelles accommodate 1,10-phenanthroline according to the reaction, phen + Y_m = Y_m(phen), where Y_m denotes a surfactant molecule aggregated in micelles. The constant K _m for the reaction of Triton X increases as a linear function of n*, the number of ethylene oxide (EO) groups, as K _m = K_EO n* + K_c. Nonzero K _EO and K _c values suggest a heterogeneous inner structure of the micelle, i.e., the hydrophobic core surrounded by a hydrophilic poly (ethylene oxide) (PEO) shell. On the basis of molar volumes, the intrinsic thermodynamic parameters of transfer of 1,10-phenantholine were extracted. The enthalpy and entropy of transfer of 1,10-phenanthroline from the PEO shell to the core are found to be small and negative. By using K _EO and K _c values for C₁₂E _n obtained by fluorometry, individual fluorescence spectra of 1,10-phenanthroline in the PEO shell and core were extracted. The fluorescence intensity of 1,10-phenathroline accommodated in the core, like in organic solvents, is significantly reduced relative to that in water. These facts indicate that the aromatic rings of 1,10-phenanthroline penetrate into the hydrophobic core, while its hydrophilic N site is still hydrated in the PEO shell.     

Modification of the lyotropic liquid crystalline microstructure of amphiphilic block copolymers in the presence of cosolvents

This article reviews the results of recent investigations on the macroscopic (phase behavior) and microscopic (microstructure) aspects of the role of cosolvents on the self-assembly of amphiphilic copolymers. A comprehensive account of the systematic studies performed in ternary isothermal systems consisting of a representative poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) block copolymer (Pluronic P105, EO₃₇PO₅₈EO₃₇), water and a polar cosolvent (such as glycerol, propylene glycol or ethanol) is presented. The effect of cosolvents on the copolymer phase behavior is quantified in terms of the highest cosolvent/water ratio able to maintain the liquid crystalline structures. The effect of cosolvents on the microstructure of the lyotropic liquid crystals is quantified in terms of the degree of relative swelling per cosolvent content per copolymer content, a parameter that characterizes the given cosolvent and copolymer. The set of correlations on the cosolvent effects on the phase behavior or microstructure to the cosolvent physicochemical characteristics (such as octanol/water partition coefficient or solubility parameter) have led to the development of a hypothesis that accounts for the cosolvent effects on the self-assembly of PEO–PPO–PEO block copolymers and can be used to predict them. The rich structural diversity and the potential for a precise and convenient modification of the lyotropic liquid crystalline microstructure of the PEO–PPO–PEO block copolymers is discussed in comparison to the phase behavior of the low-molecular nonionic surfactants.     

Using Triethylborane to Manipulate Reactivity Ratios in Epoxide-Anhydride Copolymerization: Application to the Synthesis of Polyethers with Degradable Ester Functions

The anionic ring-opening copolymerization (ROCOP) of epoxides, namely of ethylene oxide (EO), with anhydrides (AH) generally produces strictly alternating copolymers. With triethylborane (TEB)-assisted ROCOP of EO with AH, statistical copolymers of high molar mass including ether and ester units could be obtained. In the presence of TEB, the reactivity ratio of EO (r_EO), which is normally equal to 0 in its absence, could be progressively raised to values lower than 1 or higher than 1. Conditions were even found to obtain r_EO equal or close to 1. Samples of P(EO-co-ester) with minimal compositional drift could be synthesized; upon basic degradation of their ester linkages, these samples afforded poly(ethylene oxide) (PEO) diol samples of narrow molar mass distribution. In other cases where r_EO were lower or higher than 1, the PEO diol samples eventually isolated after degradation exhibited a broader distribution of molar masses because of the compositional drift of initial P(EO-co-ester) samples.     

Preparation of magnetic separable CoFe2O4/PAC composite and the adsorption of bisphenol A from aqueous solution

CoFe₂O₄/PAC composite adsorbent has been prepared via an immersing-calcination process, using ethylene diamine tetraacetic acid (EDTA) and citric acid (CIT) ligands containing sol as the CoFe₂O₄ precursor. The microstructure characterization and magnetic property of as-prepared sample were performed by means of XRD and VSM measurements. The adsorption kinetics, isotherms and thermodynamic process toward Bisphenol A molecules (BPA, which is considered as one of the typical endocrine disrupting chemicals) occurred on as-prepared magnetic adsorbent which were investigated by the pseudo-second order kinetic/intraparticle models, the Langmuir/Freundlich adsorption isothermal models and basic chemical thermodynamics principles, respectively.     

Adsorption characteristics of nanoporous carbon-silica composites synthesized from graphite oxide by a mechanochemical intercalation method

Nanoporous carbon-silica composites were synthesized from graphite oxide (GO) precursor by a mechanochemical intercalation (MCI) method at different conditions, and their structural property, thermal decomposition behaviors, and adsorption characteristics were examined. MCI method yields regular tetraethoxysilane (TEOS)-intercalated GO layer structures with controllable silicon content depending on the TEOS addition. Adsorption behaviors of water and hexane indicate the amphiphilic properties of the composites. The detailed porosities of the composites and their changes upon water adsorption were analyzed on the basis of alpha(s)-plot method of N(2) adsorption isotherms using a weight-averaged standard data from non-porous silica and non-porous carbon, which plausibly divides microporosity and mesoporosity.     

Micellization and Adsorption Parameters of Poly(Propylene Oxide)/Poly(Ethylene Glycol) Block and Graft Copolymers in Aqueous Medium

This work aims to measure the adsorption and micellization parameters of new water soluble nonionic amphiphilic block and graft copolymers based on hydrophilic poly (ethylene glycol) (PEG) and hydrophobic poly (propylene oxide) (PPO) at ambient temperature and normal atmospheric pressure. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR analyses. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The surface tension, critical micelle concentration, and surface activities were determined at different temperatures. Surface parameters such as surface excess concentration, the area per molecule at interface and the effectiveness of surface tension reduction were determined from the adsorption isotherms of the prepared surfactants. Some thermodynamic data for the adsorption and micellization process were calculated and are discussed.     

Adsorption properties of ordered mesoporous silicas synthesized in the presence of block copolymer Pluronic F127 under microwave irradiation

Ordered mesoporous silicas (OMSs) were prepared at different temperatures by using tetraethyl orthosilicate (TEOS) as a silica source, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer (Pluronic F127) as a structure directing agent and sodium chloride as an additive under acidic conditions and microwave irradiation. The small angle X-ray diffraction patterns of these samples indicate the presence of ordered mesopores, while adsorption studies show that they possess high volumes of pores, bimodal pore size distributions and large pore sizes. There is an interesting change in the hysteresis loop of nitrogen adsorption isotherms with increasing temperature of hydrothermal treatment; a delayed desorption characteristic for cage-like mesostructures is observed for the OMS samples treated at 100 and 120?°C, while the hydrothermal treatment at 140 and 160?°C leads to the samples having hysteresis loops characteristic for channel-like materials.     

Study on the influence of teos–diol molar ratio on their chemical interaction during the gelation process

Hybrid organic–inorganic materials, silica–diol, were synthesized by the sol–gel process from mixtures of tetraethylorthosilicate (TEOS) and diols: ethylene glycol (HO–CH₂–CH₂–OH) and 1,3 propane diol (HO–CH₂–CH₂–CH₂–OH), in acid catalysis. The gels have been synthesized for a molar ratio H₂O:TEOS = 4:1 and different molar ratios diol/TEOS: 0.25; 0.5; 0.75; 1.0; 1.25 and 1.5. The resulting gels were studied by thermal analysis and FT-IR spectroscopy, in order to evidence the interaction of diols with silica matrix. Thermal analysis indicated that the condensation degree increases with the molar ratio diol/TEOS until a certain value. The thermal decomposition of the organic chains bonded within the silica network in the temperature range 250–320 °C, leaded to a silica matrix with modified morphology. The adsorption–desorption isotherms type is different for the samples with and without diol. Thus, the specific surface areas have values <11 m²/g for the samples without diol and >200 m²/g for the samples with diols, depending on the annealing temperature.