trans-Chloro(1-naphthyl)bis(triphenylphosphine)nickel(II)/PCy3 catalyzed cross-coupling of aryl and heteroaryl neopentylglycolboronates with aryl and heteroaryl mesylates and sulfamates at room temperature

trans-Chloro(1-naphthyl)bis(triphenylphosphine)nickel(II) complex/PCy(3) system has been successfully applied as catalyst for the Suzuki-Miyaura cross-coupling of aryl and heteroaryl neopentylglycolboronates with aryl and heteroaryl mesylates and sulfamates in THF at room temperature. This cross-coupling reaction tolerates various functional groups, including keto, imino, ester, ether, and cyano. Together with the nickel-catalyzed, one-pot, two-step neopentylglycolborylation, this bench stable and inexpensive Ni(II)-based catalyst can be utilized as an alternative to Ni(COD)(2)/PCy(3) to provide an inexpensive, robust, and convenient synthesis of biaryl and heterobiaryl compounds.     

Nickel catalyzed cross-coupling of aryl C-O based electrophiles with aryl neopentylglycolboronates

The efficiency of mesylates, sulfamates, esters, carbonates, carbamates, and methyl ethers as C-O-based electrophiles attached to the 1- or 2-position of naphthalene and to activated and nonactivated phenyl substrates was compared for the first time in Ni-catalyzed cross-coupling with phenyl neopentylglycolboronates containing electron-rich and electron-deficient substituents in their para-position. These experiments were performed in the presence of four different Ni(II)- and Ni(0)-based catalysts. Ni(II)-based catalysts mediate the cross-coupling of most 2-naphthyl C-O electrophiles with both arylboronic acids and with neopentylglycolboronates when K(3)PO(4) is used as base. The same catalysts are not efficient when CsF is used as base. However, Ni(0)-based catalysts exhibit selective efficiency, and when reactive, their efficiency is higher than that of Ni(II)-based catalysts in the presence of both K(3)PO(4) and CsF. These results provide both reaction conditions for the cross-coupling, and for the elaboration of orthogonal cross-coupling methodologies of various C-O based electrophiles with aryl neopentylglycolboronates. With the exception of mesylates and sulfamates the efficiency of all other 2-naphthyl C-O electrophiles was lower in cross-coupling with aryl neopentylglycolboronates than with arylboronic acids.     

Two-step, one-pot Ni-catalyzed neopentylglycolborylation and complementary Pd/Ni-catalyzed cross-coupling with aryl halides, mesylates, and tosylates

Two-step, one-pot neopentylglycolborylation of aryl iodides and bromides catalyzed by NiCl2(dppe) and NiCl2(dppp) is reported. Electron-rich and electron-deficient aryl neopentylglycolboronates were efficiently cross-coupled with aryl iodides, bromides, chlorides, mesylates, and tosylates by exploiting complementary Pd/Ni and Ni/Ni catalysis. The borylation route was further extended to a three-step, one-pot synthesis of biaryls via in situ Ni-catalyzed borylation and Pd-mediated cross-coupling.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Nickel-catalyzed cross-coupling of aryl phosphates with arylboronic acids

The Suzuki-Miyaura cross-coupling of aryl phosphates using Ni(PCy(3))(2)Cl(2) as an inexpensive, bench-stable catalyst is described. Broad substrate scope and high efficiency are demonstrated by the syntheses of more than 40 biaryls and by constructing complex organic molecules. The poor reactivity of aryl phosphates relative to aryl halides is successfully employed to construct polyarenes by selective cross-coupling using Pd and Ni catalysts.     

Room-temperature Ni0-catalyzed cross-coupling reactions of aryl arenesulfonates with arylboronic acids

Room-temperature Ni(0)-catalyzed cross-coupling reactions of aryl arenesulfonates with arylboronic acids are described. The Ni(0) catalyst, derived from Ni(COD)2 and PCy3, proved to be a general one for the Suzuki-Miyaura cross-coupling of a variety of aryl arenesulfonates. The mild reaction condition, the readily availability of the catalyst, and excellent coupling yields make aryl arenesulfonates potentially useful substrates in organic synthesis.     

Suzuki-Miyaura cross-coupling of aryl carbamates and sulfamates: experimental and computational studies

The first Suzuki-Miyaura cross-coupling reactions of the synthetically versatile aryl O-carbamate and O-sulfamate groups are described. The transformations utilize the inexpensive, bench-stable catalyst NiCl(2)(PCy(3))(2) to furnish biaryls in good to excellent yields. A broad scope for this methodology has been demonstrated. Substrates with electron-donating and electron-withdrawing groups are tolerated, in addition to those that possess ortho substituents. Furthermore, heteroaryl substrates may be employed as coupling partners. A computational study providing the full catalytic cycles for these cross-coupling reactions is described. The oxidative addition with carbamates or sulfamates occurs via a five-centered transition state, resulting in the exclusive cleavage of the aryl C-O bond. Water is found to stabilize the Ni-carbamate catalyst resting state, which thus provides rationalization of the relative decreased rate of coupling of carbamates. Several synthetic applications are presented to showcase the utility of the methodology in the synthesis of polysubstituted aromatic compounds of natural product and bioactive molecule interest.     

One-pot primary aminomethylation of aryl and heteroaryl halides with sodium phthalimidomethyltrifluoroborate

A one-pot primary aminomethylation of aryl halides, triflates, mesylates, and tosylates via Suzuki-Miyaura cross-coupling reactions with sodium phthalimidomethyltrifluoroborate followed by deamidation with ethylenediamine is reported.     

NiCl(2)(PCy(3))(2): a simple and efficient catalyst precursor for the Suzuki cross-coupling of aryl tosylates and arylboronic acids

NiCl(2)(PCy(3))(2) associated with PCy(3) promotes the selective cross-coupling of aryltosylates with arylboronic acids under relatively mild reaction conditions, and a variety of functional groups are tolerated in both arenes. This is one of the simplest and most efficient experimental procedures for the coupling of arylboronic acids with aryl tosylates reported to date. Reaction: see text.     

Directed ortho-metalation-cross-coupling strategies. One-pot Suzuki reaction to biaryl and heterobiaryl sulfonamides

A general synthesis of stable ortho-boropinacolato aryl and heteroaryl sulfonamides by directed ortho-metalation (DoM) and either MeOBPin or i-PrOBpin electrophile quench, 3 → 4, is described. A one-pot metalation-Suzuki cross-coupling procedure for the synthesis of biaryls and heterobiaryls, 3 → 5, and a complementary DoM-Ir-catalyzed boronation sequence (Scheme 6 ) are delineated.     

Sequential Ni-catalyzed borylation and cross-coupling of aryl halides via in situ prepared neopentylglycolborane

A procedure for NiCl(2)(dppp)-catalyzed pinacolborylation and neopentylglycolborylation that utilizes in situ prepared inexpensive pinacolborane and neopentylglycolborane is reported. The scope of this reaction was demonstrated with a variety of aryl bromides and iodides. The resulting aryl neopentylglycolboronic esters undergo a NiCl(2)(dppe)-catalyzed cross-coupling with aryl halides, resulting in an extremely efficient and cost-effective method for the synthesis of functional biaryls, dendritic building blocks, and other complex architectures.     

Direct synthesis of 1,1-diarylalkenes from alkenyl phosphates via nickel(0)-catalysed Suzuki-Miyaura coupling

A combination of Ni(COD)(2) and PCy(3) promotes effectively the Suzuki-Miyaura cross coupling of 1-arylalkenyl phosphates with aryl boronic acids with yields attaining 99%.     

Highly efficient monophosphine-based catalyst for the palladium-catalyzed suzuki-miyaura reaction of heteroaryl halides and heteroaryl boronic acids and esters

A highly active and efficient catalyst system derived from a palladium precatalyst and monophosphine ligands 1 or 2 for the Suzuki-Miyaura cross-coupling reaction of heteroaryl boronic acids and esters has been developed. This method allows for the preparation of a wide variety of heterobiaryls in good to excellent yields and displays a high level of activity for the coupling of heteroaryl chlorides as well as hindered aryl and heteroaryl halides. Specific factors that govern the efficacy of the transformation for certain heterocyclic motifs were also investigated.     

Diaminophosphine oxides as preligands for Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids

The first investigation of air- and moisture-stable diaminophosphine oxides as preligands in the Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids has been reported. The results show that under the optimized reaction conditions, the new catalytic system with a Ni(II) σ-aryl complex as precatalyst and a diaminophosphine oxide as preligand tolerates a variety of functional groups and is efficient for both electron-rich and electron-deficient aryl chlorides, though it shows higher efficiency for activated arylboronic acids than deactivated ones. Steric effects were observed for both aryl chlorides and arylboronic acids.     

Efficient synthesis of sterically crowded biaryls by palladium-phosphinous acid-catalyzed cross-coupling of aryl halides and aryl grignards

A series of sterically hindered biaryls have been obtained by palladium- and nickel-phosphinous acid-catalyzed Kumada-Corriu cross-coupling of ortho-substituted aryl halides and Grignard reagents. This method allows formation of di- and tri-ortho-substituted biaryls in 87-98% yield under mild reaction conditions even when electron-rich aryl chlorides are used. The reaction also proceeds with aryl iodides at -20 degrees C, and under these conditions, functional groups that are generally not compatible with Grignard reagents are tolerated.     

Palladium-catalyzed tetrakis(dimethylamino)ethylene-promoted reductive coupling of aryl halides

Tetrakis(dimethylamino)ethylene (TDAE)/cat. PdCl(2)(PhCN)(2)-promoted reductive coupling of aryl bromides having either electron-donating or electron-withdrawing groups on their para- and/or meta-position proceeded smoothly to afford the corresponding biaryls in good to excellent yields. Notably, TDAE is such a mild reductant that easily reducible groups, such as carbonyl and nitro groups, are tolerate. A similar reductive coupling of ortho-substituted aryl bromides did not occur at all. The proper choice of palladium catalysts is essential for the reductive coupling; thus, PdCl(2)(PhCN)(2), PdCl(2)(MeCN)(2), Pd(hfacac)(2), Pd(2)(dba)(3), PdCl(2), and Pd(OAc)(2) were used successively for this reaction, but phosphine-ligated palladium catalysts such as Pd(PPh(3))(4), PdCl(2)(PPh(3))(2), and Pd(dppp) did not promote the reaction. The reductive coupling did not occur with nickel catalysts such as NiBr(2), NiCl(2)(bpy), and Ni(acac)(2). The TDAE/cat. palladium-promoted reductive coupling of aryl halides having electron-withdrawing groups took place more efficiently than that of aryl halides substituted with electron-donating groups. A plausible mechanism of TDAE/cat. palladium-promoted reaction is discussed.     

Efficient Stille cross-coupling reaction using aryl chlorides or bromides in water

An efficient Stille cross-coupling reaction using a variety of aryl halides in neat water has been developed. Employing palladium-phosphinous acid catalyst [(t-Bu)(2)P(OH)](2)PdCl(2) allows formation of biaryls from aryl chlorides and bromides in good to high yields. Functional groups such as ketones and nitriles are tolerated, and organic cosolvents are not required. The air stability and solubility in water of the palladium complexes used in this study facilitate operation of the coupling reaction and product isolation. The feasibility of catalyst recycling has also been demonstrated.     

Efficient copper-free PdCl2(PCy3)2-catalyzed Sonogashira coupling of aryl chlorides with terminal alkynes

Under copper-free conditions and with Cs2CO3 as a base, PdCl2(PCy3)2 showed high catalytic activity for cross-coupling of electron-rich, electron-neutral, and electron-deficient aryl chlorides with a variety of terminal alkynes in DMSO at 100-120 degrees C affording internal arylated alkynes in good to excellent yields.     

Nickel(II) complexes of bidentate N-heterocyclic carbene/phosphine ligands: efficient catalysts for Suzuki coupling of aryl chlorides

Nickel(II) complexes of bidentate N-heterocyclic carbene (NHC)/phosphane ligand L were prepared and structurally characterized. Unlike palladium, which forms [PdCl(2)(L)], the stable nickel product isolated is the ionic [Ni(L)(2)]Cl(2). These Ni(II) complexes are highly robust in air. Among different N-substituents on the ligand framework, the nickel complex of ligand L bearing N-1-naphthylmethyl groups (2 a) is a highly effective catalyst for Suzuki cross-coupling between phenylboronic acid and a range of aryl halides, including unreactive aryl chlorides. The activities of 2 a are largely superior to those of other reported nickel NHC complexes and their palladium counterparts. Unlike the previously reported [NiCl(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane), 2 a can effectively catalyze the cross-coupling reaction without the need for a catalytic amount of PPh(3), and this suggests that the PPh(2) functionality of hybrid NHC ligand L can partially take on the role of free PPh(3). However, for unreactive aryl chlorides at low catalyst loading, the presence of PPh(3) accelerates the reaction.     

Cross-Coupling of Diarylborinic Acids and Anhydrides with Arylhalides Catalyzed by a Phosphite/N-Heterocyclic Carbene Co-supported Palladium Catalyst System

A highly efficient cross-coupling of diarylborinic acids and anhydrides with aryl chlorides and bromides has been effected by using a palladium catalyst system co-supported by a strong σ-donor N-heterocyclic carbene (NHC), N,N'-bis(2,6-diisopropylphenyl) imidazol-2-ylidene, and a strong π-acceptor phosphite, triphenylphosphite, in tert-BuOH in the present of K(3)PO(4)·3H(2)O. Unsymmetrical biaryls with a variety of functional groups could be obtained in good to excellent yields using as low as 0.01, 0.2-0.5, and 1 mol % palladium loadings for aryl bromides and activated and deactivated aryl chlorides, respectively, under mild conditions. A ligand synergy between the σ-donor NHC and the π-acceptor phosphite in the Pd/NHC/P(OPh)(3) catalytic system has been proposed to be responsible for the high efficacy to arylchlorides in the cross-coupling. A scalable and economical process has therefore been developed for synthesis of Sartan biphenyl from the Pd/NHC/P(OPh)(3) catalyzed cross-coupling of di(4-methylphenyl)borinic acid with 2-chlorobenzonitrile.