Formation of Cubic-Phase Microemulsions with Anionic and Cationic Surfactants at Equal Amounts of Oil and Water

The formation and microstructure of cubic phases were investigated in anionic and cationic surfactant-containing systems at 25 degrees C. In the system sodium dodecyl sulfate(SDS)-dodecyltrimethylammonium bromide(DTAB)-water, mixing of two surfactants shows the phase transition hexagonal phase (H(1))-->surfactant precipitate, accompanied by an obvious decrease in the cross-sectional area per surfactant in the rod micelles of the hexagonal liquid crystal. In the mixed systems brine(A)-dodecane(B)-SDS(C)-DTAB(D)-hexanol(E), the isotropic discontinuous cubic phase is formed from the H(1) phase at a low cationic surfactant weight fraction, Y=D/(C+D), and from the lamellar phase at high Y upon dilution with equal amounts of oil and brine, respectively. The minimum surfactant concentration to form the cubic phase decreases with increases both in cationic surfactant weight fraction Y from 0 to 0.30 and in hexanol weight fraction, W(1)=E/(C+D+E), accordingly. The maximum solubilization for oil of the cubic phase reaches 43 wt% at 14 wt% of mixed surfactants and alcohol. Copyright 2000 Academic Press.     

A study of the interaction of dodecyl sulfobetaine with cationic and anionic surfactant in mixed micelles and monolayers at the air/water interface

The miscibility and interactions between components in mixed adsorbed films and micelles containing zwitterionic (dodecyl sulfobetaine--DSB) and cationic (dodecyltrimethylammonium bromide) or anionic (sodium dodecyl sulfonate) surfactant, respectively, have been investigated. The molecular interactions have been quantified by the values of the excess free energy of adsorption (DeltaGS,Exc) and micelle formation (DeltaGM,Exc). The obtained results indicate nonideal behavior of the investigated mixtures since the values of DeltaGS,Exc and DeltaGM,Exc) are negative. Moreover, it has been found that DSB interact more strongly with anionic surfactant as compared to cationic surfactant owing to different structure of mixed monolayers and micelles.     

Fluorescence delineation of the surfactant microstructures in the CTAB-sOS-H2O catanionic system

A key feature of amphiphilic molecules is their ability to undergo self-assembly, a process in which a complex hierarchical structure is established without external intervention. Ternary systems consisting of aqueous mixtures of cationic and anionic surfactants exhibit a rich array of self-assembled microstructures such as spherical and rodlike micelles, unilamellar and multilamellar vesicles, planar bilayers, and bicontinuous structures. In general, multiple complementary techniques are required to explore the phase behavior and morphology of aqueous systems of oppositely charged surfactants. As a novel and effective alternative approach, we use fluorescence spectroscopic measurements to examine the microstructures of aqueous cationic/anionic surfactant systems in the dilute surfactant region. In particular, we demonstrate that the polarity-sensitive fluorophore prodan can be used to demarcate the surfactant microstructures of the ternary system of cetyltrimethylammonium bromide, sodium octyl sulfate, and water. As the fluorescence signature of this probe is dependent on the nature of the surfactant aggregates present, our method is a promising new approach to effectively map complex surfactant phase diagrams.     

Counterion binding on mixed anionic/cationic micelles

Measurements of counterion binding in mixtures of surfactant aqueous solutions have been performed to study the structure of the anionic/cationic mixed micelle/solution interface. The mixtures studied were SDS/DDAC and STS/TDPC. The binding of chloride and sodium ions to mixed anionic/cationic micelles was measured using ion-specific electrodes. Counterion binding was found to be strongly dependent on the molar ratio of surfactants present. The mixed micelle/solution interface includes the headgroups of both surfactants and counterions of surfactant in excess. The addition of oppositely charged surfactant caused an increasing dissociation of counterions.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.     

Phase behavior of concentrated aqueous solutions of cetyltrimethylammonium bromide (CTAB) and sodium hydroxy naphthoate (SHN)

We have characterized the phase behavior of mixtures of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and the organic salt 3-sodium-2-hydroxy naphthoate (SHN) over a wide range of surfactant concentrations using polarizing optical microscopy and X-ray diffraction. A variety of liquid crystalline phases, such as hexagonal, lamellar with and without curvature defects, and nematic, are observed in these mixtures. At high temperatures the curvature defects in the lamellar phase are annealed gradually on decreasing the water content. However, at lower temperatures these two lamellar structures are separated by an intermediate phase, where the bilayer defects appear to order into a lattice. The ternary phase diagram shows a high degree of symmetry about the line corresponding to equimolar CTAB/SHN composition, as in the case of mixtures of cationic and anionic surfactants.     

Phase behavior and molecular thermodynamics of coacervation in oppositely charged polyelectrolyte/surfactant systems: a cationic polymer JR 400 and anionic surfactant SDS mixture

Coacervation in mixtures of polyelectrolytes and surfactants with opposite charge is common in nature and is also technologically important to consumer health care products. To understand the complexation behavior of these systems better, we combine multiple experimental techniques to systematically study the polymer/surfactant binding interactions and the phase behavior of anionic sodium dodecyl sulfate (SDS) surfactant in cationic JR 400 polymer aqueous solutions. The phase-behavior study resolves a discrepancy in the literature by identifying a metastable phase between the differing redissolution phase boundaries reported in the literature for the surfactant-rich regime. Isothermal titration calorimetry analyzed within the framework of the simple Satake-Yang model identifies binding parameters for the surfactant-lean phase, whereas a calculation for polymer-bound micelles coexisting with free micelles is analyzed in the surfactant-rich redissolution regime. This analysis provides a preliminary understanding of the interactions governing the observed phase behavior. The resulting thermodynamic properties, including binding constants and the molar Gibbs free energies, enthalpies, and entropies, identify the relative importance of both hydrophobic and electrostatic interactions and provide a first approximation for the corresponding microstructures in the different phases. Our study also addresses the stability and metastability of oppositely charged polyelectrolytes and surfactant mixtures.     

Stepwise ordering of imidazolium-based cationic surfactants during cooling-induced crystallization

Surfactants bearing imidazolium cations represent a new class of building blocks in molecular self-assembly. These imidazolium-based cationic surfactants can exhibit various morphologies during phase transformations. In this work, we studied the self-assembly and phase behavior of 1-hexadecyl-3-methylimidazolium chloride (C(16)mimCl) aqueous dispersions (0.5-10 wt %) by using isothermal titration calorimetry, differential scanning calorimetry, synchrotron small- and wide-angle X-ray scattering, freeze-fracture electron microscopy, optical microscopy, electrical conductance, and Fourier transform infrared spectroscopy. It was found that C(16)mimCl in aqueous solutions can form two different crystalline phases. At higher C(16)mimCl concentrations (>6 wt %), the initial spherical micelles convert directly to the stable crystalline phase upon cooling. At lower concentrations (0.5 or 1 wt %), the micelles first convert to a metastable crystalline phase upon cooling and then transform to the stable crystalline phase upon further incubation at low temperature. The electrical conductance measurement reveals that the two crystalline phases have similar surface charge densities and surface curvatures. Besides, the microscopic and spectroscopic investigations of the two crystalline phases suggest that the metastable crystalline phase has preassembled morphology and a preordered submolecular packing state that contribute to the final stable crystalline structure. The formation of a preordered structure prior to the final crystalline state deepens our understanding of the crystallization mechanisms of common surfactants and amphiphilic ionic liquids and should thus be widely recognized and explored.     

Aggregation behavior of p-n-alkylbenzamidinium chloride surfactants

The aggregation behavior of a novel class of surfactants, p-n-alkylbenzamidinium chlorides, has been investigated. The thermodynamics of aggregation of p-n-decylbenzamidinium chloride mixed with cationic and anionic cosurfactants has been studied using isothermal titration calorimetry. For mixtures of p-n-decylbenzamidinium chloride with n-alkyltrimethylammonium chlorides, the aggregation process is enthalpically more favorable than for the pure n-alkyltrimethylammonium chlorides, probably caused by diminished headgroup repulsion due to charge delocalization in the amidinium headgroup. A critical aggregation concentration between 3 and 4 mM has been extrapolated for p-n-decylbenzamidinium chloride at 40 degrees C, around two times lower than that of similar surfactants without charge delocalization in the headgroup and well comparable to that of similar surfactants with charge delocalization in the headgroup. In mixtures of p-n-decylbenzamidinium chloride with either sodium n-alkylsulfates or sodium dodecylbenzenesulfonate, evidence is found for the formation of bilayer aggregates by the pseudo-double-tailed catanionic surfactants composed of p-n-decylbenzamidinium and the anionic surfactant. These aggregates are solubilized to mixed micelles by excess free anionic surfactant at the measured critical aggregation concentration.     

Rheology and microstructure studies of SDS/CTAB/H2O system

Phase behavior of mixed sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB) aqueous solution was studied. The rheological properties and microstructure were investigated using a rheostat and freeze-fracture technique and are shown to be closely related to the phase behavior. Experimental investigations reveal two symmetrical aqueous two-phase systems (ATPS) in the ternary phase diagram of SDS/CTAB/H₂O system. In the surfactant rich phase of ATPS or in the adjacent stoichiometric state of ATPS, the system has high viscosity because of its long range ordered structure. Lamellar phase was found in the high viscosity samples in which the cationic and anionic surfactant are in 1: 3 or 3: 1 stoichiometry. In addition, the viscosity has a tendency to increase when salt was added to the solution. The viscosity increase is due to the salt can screen the repulsion between different charged headgroups and thus reduces the effective size of surfactants and facilitates the spherical or rod likes micelles to be transformed to worm-like micelles which can form hexagonal or liquid crystal phases. Large-size salt ions like sodium sulfate (especially organic salt ions) have more significant effect on the surfactant solution viscosity. The text was submitted by the authors in English.     

正负离子表面活性剂/离子液体双水相性质研究

本文把短链离子液体(IL)四氟硼酸1-乙基-3-甲基咪唑鎓[C2mim]BF4引入正负离子表面活性剂十二烷基硫酸钠(SDS)和十二烷基三甲基溴化铵(DTAB)双水相体系(SDS/DTAB/H2O)中,研究了IL对双水相相图及相分离体系性质的影响。结果表明,[C2mim]BF4的阳离子性质是影响阴离子表面活性剂过量区域性质的主要因素,IL通过静电作用、氢键作用等改变体系中聚集体的形貌,最终导致阴离子双水相(ATPSa)的消失。IL的阴离子对阳离子双水相(ATPSc)区域性质起着决定作用;IL的盐效应引起的对表面活性剂混合胶束扩散双电层的压缩作用,不但促进胶团的形成,缩短了形成稳定胶团所需要的时间,加快了双水相的相分离速度,而且也造成了形成ATPSc所需DTAB含量的提高。IL的引入改变了ATPSc上、下相表面活性剂的组成及含量,使富含表面活性剂的上相中阳离子表面活性剂含量更高,进而提高了双水相的萃取性能,其上相对甲基橙的萃取效率可高达96.67%。     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.     

Micellar Interactions in Nonionic/Ionic Mixed Surfactant Systems

To study the influence of the chemical nature of headgroups and the type of counterion on the process of micellization in mixed surfactant systems, the cmc's of several binary mixtures of surfactants with the same length of hydrocarbon tail but with different headgroups have been determined as a function of the monomer composition using surface tension measurements. Based on these results, the interaction parameter between the surfactant species in mixed micelles has been determined using the pseudophase separation model. Experiments were carried out with (a) the nonionic/anionic C(12)E(6)/SDS ((hexa(ethyleneglycol) mono-n-dodecyl ether)/(sodium dodecyl sulfate)), (b) amphoteric/anionic DDAO/SDS ((dodecyldimethylamine oxide)/(sodium dodecyl sulfate)), and (c) amphoteric/nonionic C(12)E(6)/DDAO mixed surfactant systems. In the case of the mixed surfactant systems containing DDAO, experiments were carried out at pH 2 and pH 8 where the surfactant was in the cationic and nonionic form, respectively. It was shown that the mixtures of the nonionic surfactants with different kinds of headgroups exhibit almost ideal behavior, whereas for the nonionic/ionic surfactant mixtures, significant deviations from ideal behavior (attractive interactions) have been found, suggesting binding between the head groups. Molecular orbital calculations confirmed the existence of the strong specific interaction between (1) SDS and nonionic and cationic forms of DDAO and between (2) C(12)E(6) and the cationic form of DDAO. In the case for the C(12)E(6)/SDS system, an alternative mechanism for the stabilization of mixed micelles was suggested, which involved the lowering in the free energy of the hydration layer. Copyright 2000 Academic Press.     

INTERACTIONS BETWEEN CATIONIC STARCH AND ANIONIC SURFACTANTS III RHEOLOGY AND STRUCTURE OF THE COMPLEX PHASE

This paper reports on studies of the rheological properties of cationic starch (CS)/ surfactant systems. The degree of substitution of the CS was 0.1 - 0.8. Surfactants investigated were sodium dodecyl sulfate (SDS), potassium octanoate (KOct), sodium decanoate (NaDe)potassium dodecanoate (KDod), sodium oleate (NaOl) and sodium erucate (NaEr). Aggregation of surfactant micelles with the polymer produces a hydrophobic and pseudoplastic gel-like complex phase with low water content and high viscosity. The rheological behavior of the gels is described by the Herschel-Bulkley model. In dilute aqueous solution the CS/surfactant aggregate structure resembles a randomly coiled polymer network, in which polymer molecules are linked by micelles. The rheological data for the gel are compatible with the assumption that the surfactants form liquid crystalline structures with the polymer anchored to the surfactant aggregates, as recently suggested for analogous systems. However, this conjecture needs to be corroborated by more direct determinations of the structure.     

A new surfactant-fluorescence probe for detecting shape transitions in self-assembled systems

A new kind of fluorescence probe, a fluorophore-labeled anionic surfactant, sodium 12-(N-dansyl)amino-dodecanate (12-DAN-ADA), was designed and synthesized. The applications of 12-DAN-ADA as a fluorescence probe in molecular assemblies, especially in the transitions between micelles and vesicles, were investigated systematically. It was found that 12-DAN-ADA can efficiently differentiate the two different aggregate types (shapes) in mixed cationic and anionic surfactant systems and double-chain cationic surfactant systems. Experimental results showed that the fluorescence anisotropy of 12-DAN-ADA increased sharply, the emission maxima became blue-shifted, and the fluorescence lifetime rose notably when the aggregates transformed from micelles to vesicles in mixed cationic and anionic surfactant systems. The fluorescence anisotropy can also distinguish different aggregate types in single-component double-chain cationic surfactant systems. Further studies demonstrated that 12-DAN-ADA is a more useful probe of transitions between micelles and vesicles than commonly used fluorescence probes, such as pyrene and 1,6-diphenyl-1,3,5-hexatriene (DPH).     

Structure of a hydrophilic-hydrophobic block copolymer and its interactions with salt and an anionic surfactant

The aggregation of a hydrophilic-hydrophobic diblock copolymer consisting of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(methyl methacrylate) (PMMA) in aqueous solution has been investigated by small-angle neutron scattering. This polybase is extensively protonated at low pH and forms micelles with a dense core of PMMA and a diffuse coronal layer of cationic PDMAEMA. Addition of salt induced micellar growth, brought about by charge screening and more efficient packing of the chains. As a result, the aggregation number increased from 8 up to 31. A similar effect was observed at low concentrations of an anionic surfactant, sodium dodecyl sulfate (SDS) since the net cationic charge in the hydrophilic coronal layer was reduced due to surfactant binding. However, at higher surfactant concentrations, a drastic structural reorganization occurred, as the PMMA became solubilized into the SDS micellar cores and the PDMAEMA chains interacted with the surfactant micelles, resulting in a "pearl-necklace" structure. The presence of the cationic polyelectrolyte significantly increased the population of SDS micelles by effectively lowering the critical micelle concentration of this anionic surfactant.     

Effect of short-chain alcohols on surfactant-mediated reversed-phase liquid chromatographic systems

The behaviour of β-blockers in a reversed-phase liquid chromatographic (RPLC) column with mobile phases containing a short-chain alcohol (methanol, ethanol or 1-propanol), with and without the surfactant sodium dodecyl sulphate (SDS), was explored. Two surfactant-mediated RPLC modes were studied, where the mobile phases contained either micelles or only surfactant monomers at high concentration. Acetonitrile was also considered for comparison purposes. A correlation was found between the effects of the organic solvent on micelle formation (monitored by the drop weight procedure) and on the nature of the chromatographic system (as revealed by the retention, elution strength and peak shape of β-blockers). When SDS is added to the mobile phase, the free surfactant monomers bind the C18 bonded chains on the stationary phase, forming an anionic layer, which attracts strongly the cationic β-blockers. The retention is modified as a consequence of the solving power of the organic solvent, micelles and surfactant monomers. The molecules of organic solvent bind the micelles, modify their shape, and may avoid their formation. They also bind the monomers of surfactant, desorbing them from the stationary phase, which affects the retention. The remaining surfactant covers the free silanols on the siliceous support, avoiding the interaction with the cationic solutes. The retention of β-blockers results from a combination of electrostatic and hydrophobic interactions, the latter being weaker compared to the hydro-organic system. The peak efficiencies and asymmetries are excellent tools to probe the surfactant layer on the stationary phase in an SDS/organic solvent system. The peaks will be nearly symmetrical wherever enough surfactant coats the stationary phase (up to 60% methanol, 40% ethanol, 35% 1-propanol, and 50% acetonitrile).     

Anionic wormlike micellar fluids that display cloud points: rheology and phase behavior

We report our investigations into the self-assembly of sodium oleate (NaOA) in the presence of a binding salt (triethylammonium chloride, Et(3)NHCl) simple salt (potassium chloride, KCl). Both salts promote the growth of long, wormlike micelles in NaOA solutions, thereby increasing the fluid viscosity. The significant difference with the Et(3)NHCl salt is that it also modifies the phase behavior of NaOA solutions. Specifically, NaOA/Et(3)NHCl solutions display cloud points upon heating, followed by phase separation into two liquid phases. Such cloud point behavior is rarely observed in ionic surfactant systems, although it is common in nonionic surfactant solutions. Interestingly, while cloud points are not observed with KCl, the addition of KCl to NaOA/Et(3)NHCl solutions further lowers the cloud point temperature. Also, in the case of tetraethylammonium halide salt, neither a cloud point nor an increase in viscosity is observed. The clouding in the case of Et(3)NHCl is attributed to the temperature-induced aggregation of anionic micelles whose surface is covered by bound counterions.     

Effect of Micelle Composition on Acidic Drugs Separation Behavior by Micellar Electrokinetic Capillary Chromatography

Micellar electrokinetic capillary chromatography (MECC) is a branch of capillary electrophoretic techniques, in which surfactant micelles are added to the electrolyte solution as pseudostationary phase. Separation in MECC is based on electrophoretic mobilities of the analytes when partitioned into micelles1. In this work, four acidic drugs similar in structure with aryl carboxylic acid were separated by MECC. The effects of type of surfactant, such as anionic surfactant SDS, nonionic …     

Studies on an ester-modified cationic amphiphile in aqueous systems: behavior of binary solutions and ternary mixtures with conventional surfactants

The aqueous behavior of an ester-modified cationic amphiphile with the molecular structure CH3CH2O(C=O)(CH2)6(C=O)O(CH2)8N+(CH3)3Br-, in the following referred to as A, has been investigated. Systems with A as the only solute, as well as different aqueous mixtures with conventional cationic surfactants, primarily dodecyltrimethylammonium bromide (DTAB), were included in the study. Isotropic solution samples were characterized using 1H NMR, 13C NMR, NMR diffusometry, and conductivity measurements, whereas liquid crystalline samples were investigated by optical polarization microscopy and small-angle X-ray diffraction. The results are compared to the behavior of the binary system of DTAB and water. A does not exhibit a typical surfactant behavior. When it is present as the only solute in a binary aqueous system, it forms neither conventional micelles nor liquid crystalline phases. However, there is clear evidence that it assembles with lower cooperativity into loose clusters at concentrations above 25-30 mM. When A is mixed with DTAB in solution, the two amphiphiles form mixed assemblies, the structure of which varies with the total amphiphile concentration. In concentrated mixtures with alkyltrimethylammonium surfactants, A can participate in hexagonal liquid crystalline phases even when it constitutes a significant fraction of the total amphiphile content.