Synthesis and characterization of a platinum(II) complex of camphenylphosphonic acid

Camphenylphosphonic acid RPO₃H₂, prepared by the literature reaction of PCl₅ with camphene, has been characterized by a single-crystal X-ray diffraction study. The compound crystallizes with a double chain structure formed by connected eight-membered hydrogen-bonded rings. Reaction of RPO₃H₂ with cis-[PtCl₂(PPh₃)₂] and excess silver(I) oxide in refluxing dichloromethane gives the platinum(II) phosphonate complex [Pt{O₃PR}(PPh₃)₂]. ³¹P{¹H} NMR spectroscopic characterization of [Pt{O₃PR}(PPh₃)₂] shows that the two PPh₃ ligands are inequivalent due to asymmetry of the camphenyl group. An X-ray diffraction study on the platinum complex shows that the PC–H bond is directed toward the four-membered ring, resulting in the terpene group pointing away from the ring, in contrast to the previously reported structure of the saturated camphanylphosphonate complex. The differences are discussed in terms of steric interactions involving the phosphonate ligands.     

Synthesis and characterization of several rhenium(I) complexes of 2-acetylpyridine and ferrocenyl carbaldehyde derivatives of 2-hydroxybenzoic acid hydrazide

The rhenium(I) carbonyl halide (X = Cl and Br) complexes, [ReX(CO)₃{H₂(py)L²}] (1a, 1b) and [ReX(CO)₃{H₂(Fc)L²}] (2a, 2b), of the ligands derived from 2-acetylpyridine and ferrocenyl carbaldehyde derivatives of 2-hydroxybenzoic acid hydrazide [H₂(py)L² and H₂(Fc)L², respectively] have been prepared in good yield. The complexes have been characterized by elemental analysis, MS, IR, UV-Vis and ¹H NMR spectroscopic methods and their structures have been elucidated by X-ray diffraction. The ligand forms a five-membered chelate ring but in H₂(py)L² it is N_pyridine,N′-bidentate while it is O,N-bidentate in H₂(Fc)L² complexes.Reaction of complex 1a with copper(II) nitrate yields the unexpected aqua complex [Re{H(py)L²}(H₂O)(CO)₃] (3) where the ligand is monodeprotonated but maintains the coordination mode observed in 1a, as shown by X-ray diffraction. However, reaction of 1b with glycine yields a conformational polymorph of the original compound, 1b′. The X-ray study shows that the orientation of the O-H phenol group against the carbonyl amide group is the main difference.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-ethoxy-3-methoxy-benzaldehyde and their rhenium(I) complexes

The ligands (HL¹, HL² and HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods, and the structures of the ligands have been elucidated by X-ray diffraction. In the case of HL¹, we have tried the reaction with [ReX(CO)₅] (X = Br, Cl) in toluene and we proved the formation of the adduct also by this way by the isolation of single crystals of 1a′ · ½C₇H_8.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Synthesis,spectroscopic characterization,X-ray structure and DFT calculations of rhenium(III) complex with 1-isoquinolinyl phenyl ketone

The [ReCl₃(MeCN)(PPh₃)] complex reacts with 1-isoquinolinyl phenyl ketone (N–O) to give [ReCl₃(N–O)(PPh₃)]. The compound has been studied by IR, UV–Vis spectroscopy, magnetic measurements and X-ray crystallography. The magnetic behavior is characteristic of mononuclear octahedral Re(III) complex with d⁴ low-spin (³T_1g ground state) and arises because of the large spin–orbit coupling, which gives diamagnetic ground state. The molecular orbital diagram of [ReCl₃(N–O)(PPh₃)] has been calculated with the density functional theory (DFT) method, and time-dependent DFT (TD-DFT) calculations have been employed in order to discussion of its spectroscopic properties in more detail.     

New fac-tricarbonyl rhenium(I) semicarbazone complexes: synthesis,characterization, and biological evaluation

Expanding our previous work on salicylaldehyde semicarbazone metal complexes as prospective anti-trypanosomal agents, five new fac-Re^I(CO)₃-containing complexes with ligands of this semicarbazone series were synthesized and characterized. An atypical coordination mode of these potentially tridentate ligands through only the carbonylic oxygen and the azomethine nitrogen (the so-called N,O fashion) was demonstrated by IR spectroscopy and supported by theoretical calculations. Three of the compounds showed moderate in vitro anti-Trypanosoma cruzi activity and increased activity with respect to the corresponding free ligands. The brominated ligands, 5-bromo-2-hydroxybenzaldehyde semicarbazone (L2) and 5-bromo-2-hydroxy-3-methoxybenzaldehyde semicarbazone (L5), led to the most active rhenium(I) complexes. These compounds are among the few reported examples of rhenium complexes bearing in vitro activity against T. cruzi.     

Preparation and characterization of poly(amidoamine) dendrimers functionalized with a rhenium carbonyl complex and PEG as new IR probes for carbonyl metallo immunoassay

The first poly(amidoamine) (PAMAM) dendrimers tethered with both (η⁵-cyclopentadienyl) rhenium tricarbonyl (CpRe(CO)₃) units and polyethylene glycol (PEG) chains were prepared and characterized by combining NMR spectroscopy and Fourier-transform IR spectroscopy. Grafting of CpRe(CO)₃ units was achieved by reductive amination of formyl-CpRe(CO)₃ with the peripheral amines of generation 3 and 4 PAMAMs to yield dendrimers labeled with a variable number of CpRe(CO)₃ units, ranging from 8 to 14 for PAMAM-G3 and 17-30 for PAMAM-G4. PEG chains of different lengths were then attached to some of the remaining peripheral amines, and their respective ability to improve the solubility of the metallodendrimers in aqueous buffered media was evaluated. These metallodendrimers represent new infrared probes designed to be coupled to immunological reagents for the amplification of the IR signal in carbonyl metallo immunoassay (CMIA).     

Synthesis and characterization of rhenium carbonyltrifluoroacetate complexes with phosphites,phosphonites and phosphinites

The rhenium(I) complexes [Re(O₂CCF₃)(CO)₃(L)] (1) and [Re(O₂CCF₃)(CO)₂LL′] (L = Ph₂POCH₂CH₂OPPh₂; L′ = PPh_n(OR)_3−n; R = Me, Et; n = 0–2) (2a–f) have been synthesised by the reaction of the parent bromo derivatives with AgO₂CCF₃. These compounds have been characterized by microanalysis, IR, NMR, mass spectrometry and, in the cases of 1 and 2a, by X-ray diffraction. The metal is in a distorted octahedral environment with the trifluoroacetate ligand acting in a monodentate manner.     

The new facial tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionic acid and carbonyl complexes thereof containing manganese and rhenium

The new facially coordinating tripod ligand 3,3-bis(1-methylimidazol-2-yl)propionate (bmip) has been studied. A synthetic route to sodium 3,3-bis(1-methylimidazol-2-yl)propionate (Na[bmip], 2a) and its hydrochloride (Hbmip · 2HCl, 2b) is reported. The electronic properties of Hbmip were calculated by DFT methods and are compared to those of structurally similar bis(pyrazol-1-yl)acetic acids. The ligand was applied in the synthesis of the two tricarbonyl complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4). Methyl 3,3-bis(1-methylimidazol-2-yl)propionate (bmipme) (1), which is the precursor of Hbmip, and the complexes [Re(bmip)(CO)₃] (3) and [Mn(bmip)(CO)₃] (4) were characterised by single crystal X-ray analysis.     

Electronic emission and absorption spectroscopy of the rhenium complexes Re(CO)3Cl(phosphine)2

Summary The compounds Re(CO)₃Cl(L)₂,L=triphenylphosphine, tri-p-tolyphosphine, and Re(CO)₃-Cl(L),L=1,2-bis(diethylphosphinoethane) are luminescent in solution and in crystalline form when excited between 351 nm and 514 nm at temperatures ranging from 10 K to room temperature. The absorption spectra contain a weak (E 10M ^–1 cm^–1) band in the visible region of the spectrum between 400 and 500 nm. The lowest energy transition giving rise to these spectroscopic features is assigned to a d-d transition.

---

Elektronenemissions- und Absorptionsspektroskopie der Rheniumkomplexe Re(CO)₃Cl(Phoshin)₂

Zusammenfassung Die Verbindungen Re(CO)₃Cl(L)₂ mitL=Triphenylphosphin, Tri-p-tolylphosphin und Re(CO)₃Cl(L)₂ mitL=1,2-Bis(diethylphosphinoethan) sind in Lösung und im kristallinen Zustand bei Anregung zwischen 351 und 514 nm im Temperaturbereich von 10 K bis Raumtemperatur lumineszent. Die Absorptionsspektren enthalten im sichtbaren Bereich zwischen 400 und 500 nm eine schwache Bande von 10M ^–1 cm^–1. Der energetisch tiefstliegende Übergang, der für dieses Verhalten verantwortlich ist, wird einem d-d-Übergang zugeordnet.

     

A novel tricarbonyl rhenium complex of 2-benzoylpyridine - Synthesis, spectroscopic characterization, X-ray structure and DFT calculations

The reaction of Re(CO)₅Cl with 2-benzoylpyridine (bopy) has been examined and a novel Re(CO)₃⁺ tricarbonyl - fac-[Re(CO)₃(bopy)Cl] - has been obtained. The compound has been studied by IR, UV-Vis spectroscopy and X-ray crystallography. The molecular orbital diagram of the tricarbonyl has been calculated with the density functional theory (DFT) method. The spin-allowed singlet-singlet electronic transitions of [Re(CO)₃(bopy)Cl] have been calculated with the time-dependent DFT method, and the UV-Vis spectrum of the title compound has been discussed on this basis.     

Syntheses and structures of missing links among polybromocyclopentadienyl rhenium and manganese tricarbonyl complexes

Reactions of diazocyclopentadiene and NBS at appropriate stoichiometries give 2,5-dibromodiazocyclopentadiene and 2,3,5-tribromodiazocyclopentadiene in 40% and 30% yields, respectively, after chromatography. These react with BrRe(CO)₅ or BrMn(CO)₅ (80 °C, CF₃C₆H₅) to give (η⁵-1,2,3-C₅H₂Br₃)M(CO)₃ (3; M = a, Re; b, Mn) and (η⁵-C₅HBr₄)M(CO)₃ (4a,b) in 75-85% yields. In the case of 4a, the intermediate η¹-cyclopentadienyl complex (η¹-C₅HBr₄)Re(CO)₅ (4′a) can be isolated (44%). An isomer of 3b, (η⁵-1,2,4-C₅H₂Br₃)Mn(CO)₃, is accessed by desilylating previously reported (η⁵-1,2,4-C₅(SiMe₃)₂Br₃)Mn(CO)₃ with CsF/MeOH (85%). The reaction of tetrabromodiazocyclopentadiene and BrRe(CO)₅ at 80 °C in CF₃C₆H₅ gives the η¹-cyclopentadienyl complex (η¹-C₅Br₅)Re(CO)₅ (5′a, 74%) which cannot be induced to decarbonylate to (η⁵-C₅Br₅)Re(CO)₃ (5a) under a variety of conditions. However, 5a can be isolated (45%) when a similar reaction is conducted at 120 °C. The IR properties of the preceding complexes are compared, and the crystal structures of 3a, 3b, 5a, and 5′a are determined and analyzed.     

Preparation of bis(aryldiazene) and new aryldiazenido complexes of rhenium

Mixed-ligand hydride ReH₂(NO)L(PPh₃)₂ complexes [L=P(OEt)₃ or PPh(OEt)₂] were prepared by allowing the ReH₂(NO)(PPh₃)₃ species to react with an excess of phosphite. Treatment of ReH₂(NO)L(PPh₃)₂ hydrides with an equimolar amount of aryldiazonium cations ArN₂⁺ gives the mono-aryldiazene [ReH(ArNNH)(NO)L(PPh₃)₂]BPh₄ complexes (Ar=C₆H₅, 4-CH₃C₆H₄), while treatment with an excess of ArN₂⁺ yields bis(aryldiazene) [Re(ArNNH)₂(NO)L(PPh₃)₂](BPh₄)₂ derivatives. Binuclear [{ReH(NO)L(PPh₃)₂}₂(μ-HNNArArNNH)](BPh₄)₂ and [{Re(4-CH₃C₆H₄NNH)(NO)L(PPh₃)₂}₂(μ-HNNArArNNH)](BPh₄)₄ complexes (ArAr=4,4′-C₆H₄C₆H₄, 4,4′-C₆H₄CH₂C₆H₄) were also prepared. The reaction of the triphenylphosphine ReH₂(NO)(PPh₃)₃ complex with aryldiazonium cations was studied and led exclusively to mono-aryldiazene [ReH(ArNNH)(NO)(PPh₃)₃]BPh₄ and [{ReH(NO)(PPh₃)₃}₂(μ-HNNArArNNH)](BPh₄)₂ derivatives. The complexes were characterised spectroscopically (IR, NMR) using the ¹⁵N-labelled derivatives. The aryldiazenido [ReH(C₆H₅N₂){PPh(OEt)₂}₄]BPh₄ complex was prepared by allowing trihydride ReH₃[PPh(OEt)₂]₄ to react with phenyldiazonium tetrafluoroborate. A reaction path involving the aryldiazene [ReH₂(C₆H₅NNH){PPh(OEt)₂}₄]⁺ intermediate was also proposed.     

Tricarbonyl rhenium complexes of bis(pyrazol-1-yl)methane and bis(3,5-dimethylpyrazol-1-yl)methane – Synthesis,spectroscopic characterization,X-ray structure and DFT calculations

Two novel tricarbonyl rhenium complexes based on the bidentate heterocyclic N–N ligands [bis(pyrazol-1-yl)methane(bpzm) and bis(3,5-dimethylpyrazol-1-yl)methane(bdmpzm)] have been synthesized by heating at reflux [Re(CO)₅Cl] with the appropriate N–N ligand in toluene. The compounds have been characterized by IR and UV–Vis spectroscopy and X-ray analysis. Density functional theory (DFT) and time-dependent (TD) DFT calculations have been carried out for the [Re(CO)₃(bdmpzm)Cl] complex.     

Seven-coordinate rhenium(III) complexes of 1-(2-pyridylazo)-2-naphtholate: X-ray studies,spectroscopic characterization and DFT calculations

The reactions of [ReX₃(MeCN)(PPh₃)₂] (X = Cl or Br) with 1-(2-pyridylazo)-2-naphthol (HPAN) have been examined and the [ReBr(PAN)₂] · 2CHCl₃ (1) and [ReCl(PAN)₂] (2) complexes have been obtained. The both complexes have been structurally and spectroscopically characterized, and compound 1 has been additionally studied by magnetic measurements. The magnetic behavior is characteristic of mononuclear seven-coordinated Re(III) complex with d⁴ low-spin configuration, which gives diamagnetic ground state.     

Luminescence and spectroscopic studies of organometallic rhodium and rhenium multichromophore systems carrying polypyridyl acceptor sites and phenylethynyl antenna subunits

The synthesis, structure, photophysics, and spectroscopic characterization of two novel organometallic rhodium and rhenium multichromophore photosensitizers carrying a central 2,2′-bipyridyl acceptor moiety are reported. Due to the presence of rigid phenylethynyl substituents in their 5,5′-position acting as intramolecular antenna groups, these compounds display perturbed excited state properties and a modified luminescence behaviour compared to the unsubstituted parent systems. The rhodium derivative is characterized by a weak blue-green intraligand (IL) phosphorescence occurring only at low temperatures. In the rhenium complex both a blue-green ligand-based luminescence and a red phosphorescence of metal-to-ligand charge transfer (MLCT) origin is observed at room temperature in solution. In rigid 77 K matrix the lowest-lying excited state levels approximate in energy and a structured luminescence band occurs which is ascribed to a ligand phosphorescence with admixed MLCT character.