Optically active cyclopentadienyl and indenyl ligands obtained from lactic acid esters

Asymmetric cyclopentadienes and indenes are easily prepared by nucleophilic attack of LiCp or LiInd on tosylate or triflate of ethyl (S)-(−) lactate. The selectivity of the reaction depends on the nature of the leaving group. This is particularly true in the case of the reaction of LiCp with sulfonates of ethyl (S)-(−) lactate. Indeed, only the monosubstituted cyclopentadiene lactate 2 is obtained from the triflate 6, whereas from the tosylate 1, besides 2 (20%) a 1,3-disubstituted cyclopentadiene lactate 3 is isolated (16.5%). From cyclopentadiene and indene lactate 2 and 7, optically active β-hydroxycyclopentadiene 10 and β-hydroxyindene 11 are obtained by reduction with LiAlH₄. Two rhodium(I) complexes 14 and 15 have been synthesized from (R,S)-2-(cyclopentadienyl)N,N-dimethylpropanamide 12 and (S)-2-(cyclopentadiene)propan-1-ol 10, respectively. The molecular structure of these complexes has been determined. Analytical and preparative chiral HPLC have been used to determine the optical purity of the ligands and to isolate enantiopure cyclopentadienyl complexes from racemic or enantiomerically enriched rhodium(I) complexes.     

Tunable ligands for asymmetric catalysis: readily available carbohydrate-derived diarylphosphinites induce high selectivity in the hydrovinylation of styrene derivatives

Only a limited number of ligands have been successfully employed for the Ni-catalyzed asymmetric hydrovinylation reaction. Diarylphosphonites prepared from readily available carbohydrates in conjunction with a highly dissociated counterion ([3,5-(CF3)2-C6H3)4B]- or SbF6-) effect the hydrovinylation of 4-bromostyrene or 4-isobutylstyrene under ambient pressure of ethylene with the best overall selectivities reported to date for these important substrates. In a prototypical synthesis of a 2-arylpropionic acid, 3-(4-bromophenyl)-1-butene (prepared in 98% isolated yield and 89% ee from 4-bromostyrene) has been transformed into (R)-ibuprofen by Ni-catalyzed cross-coupling with i-BuMgBr, ozonolysis, and subsequent oxidation of the resulting aldehyde.     

Structural preferences of cyclopentadienyl and indenyl rings in iridium(I) carbene complexes

Cleavage of the [Ir(η⁴-COD)Cl]₂ dimer in the presence of the corresponding imidazolium salts and the strong base tBuO⁻ leads to the formation of Ir(I) derivatives of N-heterocyclic carbenes. When halide is replaced by NaCp, a mixture of [Ir(η⁴-COD)(NHC^R)(η¹-Cp)] and [Ir(η²-COD)(NHC^R)(η⁵-Cp)] is obtained. The latter is favored for R = Cy, while the former predominates for R = Me. Conversely, [Ir(η⁴-COD)(NHC^R)(η¹-Ind)] is the only product of the reaction with NaInd, despite the R substituent. DFT/B3LYP calculations confirmed that the η¹ coordination mode of the ring gives rise to the most stable structures, namely square planar complexes of 5d⁸ Ir(I). The energy of the 18 electron species containing η²-COD and η⁵-Ind or Cp is higher by 13 and 5 kcal mol⁻¹, respectively. The fluxional behaviour of indenyl, detected by NMR in the solutions of [Ir(η⁴-COD)(NHC^R)(η¹-Ind)], is associated to the low energy of the η³-Ind species required in the conversion process, and is not easily observed in the cyclopentadienyl derivatives, where a similar intermediate is disfavored.     

Synthesis of spirane-bridged rigidified oxalkyl cyclopentadienyl ligands

Methods for the preparation of constrained spirane-bridged oxalkyl indenyl ligands are described. The cis,cis-α,α′-spirane derivatives were synthesised in several steps from spiro[4.4]nonane-1,6-dione. Carbylation was achieved by Wittig methenylation. A subsequent stereoselective hydroboration by 9-BBN followed by peroxide treatment furnished the corresponding cis-methanol. Further manipulations provided the cis-carboxylic ester, which in a double Grignard reaction with α,α′-dichloro-o-xylene, furnished the corresponding indenyl derivative. The final products were cis,cis-α-(2-indenyl)-α′-(methoxy or methoxymethyl)spiro[4.4]nonanes.     

Synthesis of cationic metallocyclophanes with arene and cyclopentadienyl ligands

Previously unknown bridged cationic complexes (metallocyclophanes) with arene and cyclopentadienyl ligands have been obtained by ligand exchange in trifluoroacetic acid:

     

Complexes of manganese, iron and cobalt with sterically demanding indenyl ligands

A series of manganese, iron and cobalt complexes bearing sterically demanding 1,3-disubstituted indenyl ligands, 1,3-(Me(3)C)(2)C(9)H(5) (Ind(tBu)) (1) and 1,3-(C(6)H(11))(2)C(9)H(5) (Ind(cHexyl)) (2), has been prepared. These complexes have been fully characterised by various spectroscopic techniques, elemental analysis, and X-ray diffraction experiments. In addition the electronic and steric properties of these ligands have been evaluated. Although the cone angles and electronic properties are similar to 1,2,4-(Me(3)C)(3)C(5)H(2) (Cp'), indenyl iron half-sandwich complexes are only stable at low temperature. This has been demonstrated for 1-FeI using suitable trapping experiments such as CO or NaCp' addition to yield 1-Fe(CO)(2)I and 1-FeCp', respectively. Overall the metal-ligand bonds in these indenyl compounds are weaker than in the corresponding cyclopentadienyl derivatives. In addition, the bis(indenyl)manganese complexes, 1-Mn and 2-Mn, are high-spin, as established by solid state magnetic susceptibility studies in the temperature range 2-300 K.     

Synthesis and characterization of chromocenes containing bulky cyclopentadienyl ligands

Two equivalents of K[Cp′] (Cp′=C₅(i-Pr)₃H₂, C₅(i-Pr)₄H, C₅(t-Bu)₂H₃) react with CrCl₂ in THF to give the corresponding chromocenes, Cp′₂Cr, in good yield. Despite the presence of bulky substituents on the rings that could affect their properties, the complexes are extremely air- and moisture-sensitive, and possess a low-spin ground state. The low-spin paramagnetic nature of each chromocene was confirmed by magnetic susceptibility measurements. The solid-state structure of [C₅(i-Pr)₃H₂]₂Cr was obtained using single crystal X-ray analysis. It displays rigorously parallel rings, with an average Cr–C(ring) distance of 2.17(1)Å; the chromium resides on a crystallographically imposed inversion center. The orientation of the isopropyl groups minimizes unfavorable steric interactions between the rings.     

Synthesis and performance of ansa-metallocene catalysts with substituted heterocyclic and indenyl ligands

Synthesis of new ansa-metallocene catalysts incorporating branched alkyl groups alpha to the bridgehead carbon of indenyl and thiapentalenyl ligands is reported. Me₂Si(2-Me-4-Ph-Indenyl)₂ZrCl₂ and Me₂Si(2,5-Me₂-3-Ph-Thiapentalenyl)₂ZrCl₂ type metallocenes with one and two isopropyl groups substituted for 2-methyl substitutents were prepared and used as procatalysts in propylene polymerizations and E/P copolymerizations. The 2-isopropyl groups influenced catalyst activity, molecular weight, and the relative amounts of microstructure errors. In contrast to procatalysts with only 2-methyl groups, polymer molecular weights increased in E/P copolymerizations with 2-isopropyl substituted complexes. The text was submitted by the authors in English.     

Zirconium and titanium complexes with side-chain functionalized cyclopentadienyl ligands

The present review summarizes the results of studies of Zr and Ti complexes based on chelating side-chain functionalized cyclopentadienyl ligands, which were synthesized by the author of the present review and co-workers. The coordination ability of the functional groups is considered. Dynamic processes that occur in half-sandwich complexes in solutions were studied by NMR spectroscopy. Emphasis is given to the reduction reactions of side-chain functionalized zirconocene dichlorides, as well as to the structures and properties of the reaction products depending on the nature of the heteroatomic substituent.     

Sterically hindered cyclopentadienyl and phospholyl ligands in dysprosium chemistry

Three new unsolvated organometallic complexes of dysprosium(III) with very sterically hindered π-ligands have been synthesized and structurally characterised: the monomeric bis[η⁵-(1,2,4-tris-trimethylsilylcyclopentadienyl)]iododysprosium (1b), bis[η⁵-(1,4-bis-t-butyl-2,3-dimethylphospholyl)]iododysprosium, (1c) and the dimeric tetrakis[η⁵-(1,4-bis-t-butyl-2,3-dimethylphospholyl)]bis(μ-iodo)di-dysprosium (1d). The relative steric bulk of the π-ligands have been assessed by comparison of the structural data of 1b–d with that of the previously described bis[η⁵-(1,2,4-tris-t-butylcyclopentadienyl)]iododysprosium (1a). Contrary to 1a, reduction attempts on 1b–d were unsuccessful. The reaction of the dysprosium(II) complex bis[η⁵-(1,2,4-tris-t-butylcyclopentadienyl)]dysprosium(μ-bromo)-potassium[18]crown-6 (3) with fluorenone resulted in its monoelectronic reduction and coordination of the resulting ketyl to dysprosium(III): isolation of potassium[18]crown-6 bis[η⁵-(1,2,4-tris-t-butylcyclo-pentadienyl)](fluorenone ketyl)bromodysprosate (4) that was structurally characterised.     

Hafnium cyclopentadienyl compounds containing various chelate ligands in the molecule

Conclusions Some previously unknown hafnium cyclopentadienyl compounds, containing various chelate ligands in the molecule, were synthesized.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2359–2361, October, 1973.     

Preparation, characterization, and reactivities of thienyl nickel complexes bearing indenyl ligands

The complexes (1-R, 2-R′-indenyl)NiPPh₃(thienyl) (R′=H, R=Me (1); Et (2); i-Pr (3); CH₂Ph (4); R′=Ph, R=Me (5)) have been prepared and characterized by spectroscopic techniques and, in the case of 1, 2 and 5, by X-ray crystallographic studies. When combined with MAO, these compounds catalyze the polymerization of phenylacetylene to cis-transoidal poly(phenylacetylene) with M_w in the range of 5-7.5×10⁴ Da. NMR studies have revealed that MAO methylates these complexes without ionizing the Nithienyl bond; this implies that the polymerization reactions likely follow a non-cationic mechanism similar to that catalyzed by the corresponding NiCCPh complexes studied previously. Complexes 1-5 reacted with CF₃SO₃H to produce the corresponding NiOSO₂CF₃ compounds by protonation at the α-C of the thienyl moiety. The compound (1-Bzindenyl)Ni(PPh₃)(OSO₂CF₃) (9) has been isolated and fully characterized.     

Ion exchange on resins with temperature-responsive selectivity III. Influence of complex formation stoichiometry on temperature dependence of resin selectivity

The influence of temperature (293308 K 1:1 IDA:Ni2+ complex is dominating. The Cu2+-Ni2+ exchange equilibrium from sulfate medium is characterized by the formation of nickel complexes of both stoichiometries within the whole temperature range studied. The dependence of alpha on T in Zn2+-Co2+ exchange system has been shown to be weaker than that in the Cu2+-Ni2+ system. This result is in a good agreement with the predictions made in the first communication of this series. The results of thermostripping experiments carried out for Cu2+-Co2+ exchange have shown that the efficiency of the thermostripping process depends on both the interval of working temperatures (deltaT) and its position on the temperature scale. The efficiency of thermostripping rises with an absolute deltaT value and also increases following the shift of temperature interval to the lower temperature range.     

New 1,3-disubstituted side-chain functionalized indenyl ligands and zirconium complexes derived from them

New functionalized indenyl ligands Ind^X = 1,3-C₉H₅(Prⁱ)(CH₂CH₂X) (X = OMe or NMe₂) and 1,3-C₉H₅(Prⁱ)[CMe₂CH₂(2′-py)] and the zirconium sandwich complexes (Ind^X)Cp*ZrCl₂ (Cp* is pentamethylcyclopentadienyl) were synthesized. The photochemical behavior and the reduction reactions of zirconocene dichlorides were investigated. The properties of these compounds are determined mainly by the high lability of Zr-Ind bonds. The reduction of (Ind^X)Cp*ZrCl₂ (X = NMe₂) selectively affords the complex Cp*[η⁵:η²-(C,N)-C₉H₅(Prⁱ)CH₂CH₂N(Me)CH₂]ZrH as the intramolecular NCH₂-H bond activation product. The molecular structures of the complex (Ind^X)Cp*ZrCl₂ (X = OMe) and its photochemical decomposition product [Cp*ZrCl₂(OMe)]₂ were established by X-ray diffraction.     

Synthesis and structural characterization of new mixed-ring indenyl derivatives of molybdenum containing phosphorus ligands

Reaction of NaBH₄ with [IndCpMo(dppe)](BF₄)₂ (1) in acetone yields [IndMo(η⁴-C₅H₆)(dppe)]BF₄ (2) quantitatively. The hydride addition takes place at the external face of the Cp ring. Dissolution of 2 in dichloromethane gives [IndMo(η⁴-C₅H₅-exo-CH₂Cl)(dppe)]BF₄, as confirmed by elemental analysis, IR and ¹H NMR spectroscopy. The similar dication [IndCpMo{P(OMe)₃}₂](BF₄)₂ (4) reacts with NaBH₄, in a solvent dependent manner. In acetonitrile, [IndMo(η⁴-C₅H₆){P(OMe)₃}₂]BF₄ (5) is obtained and in acetone a P(OMe)₃ ligand is lost resulting in the asymmetric phosphite-hydride, [IndCpMoH{P(OMe)₃}]⁺ (6). The molecular structures of [IndMo(η⁴-C₅H₆){P(OMe)₃}₂]PF₆ and [IndCpMoH{P(OMe)₃}]PF₆ were characterized by single-crystal X-ray diffraction.     

Bis(cyclopentadienyl) compounds of zirconium with various ligands

Russian Chemical Bulletin -     

Formations and structures of cobalt dithiolene complexes with nitrogen group-substituted cyclopentadienyl ligands

The cobalt dithiolene complex with the sulfonylamide-substituted Cp ligand [(C₅H₄-NHTs)Co{S₂C₂(COOMe)₂}] (1, Ts = p-SO₂C₆H₄Me) reacted with TsOH · H₂O to give [(C₅H₄-NH₂)Co{S₂C₂(COOMe)(H)}] (2), [(C₅H₄-NHTs)Co(S₂C₂H₂)] (3) and [(C₅H₄-NHTs)Co{S₂C₂(COOMe)(H)}] (4). Complex 1 was dissolved in a basic aqueous solution, and the anion reacted with Me₂SO₄ to form the N-methylated product [{C₅H₄-N(Me)Ts}Co{S₂C₂(COOMe)₂}] (5); the carboxylic acid complex [{C₅H₄-N(Me)Ts}Co{S₂C₂(COOMe)(COOH)}] (6) formed by a base hydrolysis. The X-ray crystal structures of complexes 4-6 and the methylsulfonylamide-substituted Cp complex [(C₅H₄-NHMs)Co{S₂C₂(COOMe)₂}] (7, Ms = SO₂Me) were determined. In the crystal structures of complexes 4 and 7, intermolecular hydrogen bondings of NH?O (ca. 2.1 Å) and NH?S (ca. 3.1 Å) were observed. Complex 6 showed the OH?O intermolecular hydrogen bonding (ca. 1.6 Å) of COOH moiety between two molecules, and these two molecules were assembling each other. Complexes 5 and 6 showed an intramolecular π-π interaction between the aromatic cobaltadithiolene and benzene rings, and complex 5 also has intermolecular π-π interactions between two benzene rings, and between two cobaltadithiolene rings.     

Computational studies of the coordination stereochemistry, bonding, and metal selectivity of mercury

Knowledge of the bonding and selectivity of organic mercury, [H3C-Hg]+ (MeHg+), and inorganic Hg2+ for protein and DNA functional groups is important for understanding the mechanism of heavy metal poisoning. Herein, we elucidate (1) the differences between inorganic Hg2+ and organic MeHg+ in their interactions with different ligands of biological interest, (2) the protein and DNA functional groups that Hg2+ and MeHg+ target in aqueous solution, and (3) the likelihood of "soft" Hg2+ displacing the "borderline" Zn2+ bound to "harder" nitrogen/oxygen-containing side chains such as His and Asp/Glu. The results reveal that, relative to Hg2+, the lower positive charge on MeHg+ results in a longer and weaker bond with a given ligand, in accord with the observed kinetic lability of MeHg+ complexes. They also indicate that negatively charged or polar amino acid side chains containing S-/O-/S/N donors could coordinate to both organic MeHg+ and inorganic Hg2+. In addition, Gua and Cyt could also coordinate to MeHg+ and disrupt Gua...Cyt base pairing. A key novel finding is that Hg2+ is a far better electron acceptor than Zn2+, and can thus accept more negative charge from the Zn ligands than the native Zn2+, thus enhancing Hg-ligand interactions and enabling Hg2+ to displace the native cofactor from zinc essential enzymes and "structural" Zn proteins. The results herein support several possible mechanisms for Hg poisoning. Ways that mercury poisoning could be prevented in cells are discussed.