Heterogeneity and liability of Pb(II) complexation by humic substances: practical interpretation tools

The complexation of Pb(II) by natural organic matter (NOM) is better described by taking into account the dependence of the strength of binding on metal loading conditions. The utility of a linear differential equilibrium function for interpretation of metal ion binding data is demonstrated. This approach considers the binding intensity (log K*) as a function of metal ion loading (theta = bound metal/binding site concentration). Three methods for calculating this function are presented: -direct calculation from metal titration curves, -direct calculation from polarograms, and -compilation of data derived from interpretation of complexation in terms of one- or two- binding sites (e.g. Scatchard analysis), i.e. Cc (complexation capacity = effective site concentration)-K pairs. Heterogeneity also impacts on the apparent lability of complexes; complexes formed at the lowest metal loadings are the least labile.     

Influence of chloride ions,pH and humic substances on complexation of cadmium(II) and copper(II)

An influence of chloride ions, pH and humic substances concentration on complexation of cadmium(II)and copper(II) ions with humic acids was studied by means of inversion-voltamperometry using the method of experimental design. Equations establishing dependences of concentrations of humate complexes of cadmium(II) and copper(II) on concentrations of chloride and humic substances and pH values too were derived.     

Influence of Pb(II) on the radical properties of humic substances and model compounds

The influence of Pb(II) ions on the properties of the free radicals formed in humic acids and fulvic acids was investigated by electron paramagnetic resonance spectroscopy. It is shown that, in both humic acid and fulvic acid, Pb(II) ions shift the radical formation equilibrium by increasing the concentration of stable radicals. Moreover, in both humic acid and fulvic acid, Pb(II) ions cause a characteristic lowering of the stable radicals' g-values to g = 2.0010, which is below the free electron g-value. This effect is unique for Pb ions and is not observed with other dications. Gallic acid (3,4,5-trihydroxybenzoic acid) and tannic acid are shown to be appropriate models for the free radical properties, i.e., g-values, Pb effect, pH dependence, of humic and fulvic acid, respectively. On the basis of density functional theory calculations for the model system (gallic acid-Pb), the observed characteristic g-value reduction upon Pb binding is attributed to the delocalization of the unpaired spin density onto the Pb atom. The present data reveal a novel environmental role of Pb(II) ions on the formation and stabilization of free radicals in natural organic matter.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Chemodynamics of metal complexation by natural soft colloids: Cu(II) binding by humic acid

The chemodynamics of Cu(II) complexation by humic acid is interpreted in terms of recently developed theory for permeable charged nanoparticles. Two opposing electric effects are operational with respect to the overall rate of association, namely, (i) the conductive enhancement of the diffusion of Cu(2+), expressed by a coefficient f(el), which accounts for the accelerating effect of the negative electrostatic field of the humic particle on the diffusive transport of metal ions toward it, and (ii) the ionic Boltzmann equilibration with the bulk solution, expressed by a factor f(B), which quantifies the extent to which Cu(2+) ions accumulate in the negatively charged particle body. These effects are combined in the probability of outer-sphere metal-site complex formation and the covalent binding of the metal ion by the complexing site (inner-sphere complex formation) as in the classical Eigen mechanism. Overall "experimental" rate constants for CuHA complex formation, k(a), are derived from measurements of the thermodynamic stability constant, K*, and the dissociation rate constant, k(d)*, as a function of the degree of metal ion complexation, θ. The resulting k(a) values are found to be practically independent of θ. They are also compared to theoretical values; at an ionic strength of 0.1 mol dm(-3), the rate of diffusive supply of metal ions toward the particles is comparable to the rate of inner-sphere complex formation, indicating that both processes are significant for the observed overall rate. As the ionic strength decreases, the rate of diffusive supply becomes the predominant rate-limiting process, in contrast with the general assumption made for complexes with small ligands that inner-sphere dehydration is the rate-limiting step. The results presented herein also resolve the discrepancy between experimentally observed and predicted dissociation rate constants based on the above assumption.     

Trace element complexation by humic substances: issues related to quality assurance

Despite the amount of data available and the effort that has been put into studying the binding of trace elements by humic substances, there is still a significant amount of uncertainty surrounding the validity and applicability of the existing values in solving particular problems in the environmental, toxicity and industrial fields. This paper discusses the problems associated with the characterisation of humic binding and proposes a general approach for quality assessing trace element-humic substances complexation data, which includes the normalisation of raw experimental data prior to any data treatment (modelling).     

Fluorescence spectrometry for quantitative characterization of cobalt(II) complexation by Leonardite humic acid

Quenching of the fluorescence of a Leonardite humic acid by Co(II) has been studied at different pH. The interaction was monitored by emission fluorescence and by synchronous fluorescence with two different offsets (deltalambda=20 and 80 nm). It was found that synchronous fluorescence performed with the smaller offset resolves the individual components of the heterogeneous material better than emission or synchronous fluorescence performed with the larger offset. Enhancement of the signal induced by Cobalt(II) complexation resulted in more complex behavior for measurements performed by synchronous fluorescence with an offset of 20 nm, however. The quenching profiles obtained for pH 5.0, 6.0, and 7.0 ([KNO(3)]=0.1 mol L(-1); [LHA]=3.3 mg(C) L(-1); [Co(II)]=1.0 x 10(-6)-1.6 x 10 (-3) mol L(-1)) by emission and synchronous (deltalambda=80 nm) fluorescence were analyzed by two methods: 1. a non-linear least-squares procedure that leads to conditional constants; and 2. a pH-dependent discrete logK spectrum model that leads to stability constants. The first method resulted in poor fitting and unreasonable values for maximum capacities. The second procedure resulted in smooth fitting that accounted well for the pH changes when results for pH 6.0 and 5.0 were predicted by use of the four values of logK(Co)(i) (4.31, 3.76, 7.32, and 7.67 corresponding to the four sites (i) of the respective pKa(i) values 4, 6, 8, and 10) calculated at pH 7.0 for the equilibrium     

A study of complexation thermodynamic of humic acid with cadmium (II) and zinc (II) by Schubert's ion-exchange method

The complexation of humic acid from Azraq Oasis with two heavy metal ions Cd(II) and Zn(II) was investigated at pH 4 and 5 under constant ionic strength of 0.1 and at different temperatures (25, 35, 45, 55 and 65 °C). This investigation was done by using Schubert's ion-exchange equilibrium method, and its modified version.The derived conditional stability constants (log β_n) for these two metal-humate complexes were determined; they formed 1:1 and 1:2 complexes. It was found that the conditional stability constants (log β_n) increased by increasing pH and temperatures for all metal-humate complexes. It was found that the conditional stability constant log β₁ for Cd-humate is bigger than Zn-humate at all the desired temperatures and at pH 4 and 5.The derived constants and their temperature dependences have been used to calculate the corresponding thermodynamic parameters ΔG, ΔH, and ΔS, the results indicate that the stability of these complexes derives from very favorable entropy.     

Study of the complex formation of copper(II) by humic and fulvic substances

A study of the complexation of copper(II) by fulvic substances, based on ion-selective electrode measurements, is reported. The influences of the copper concentration (10^-6 –1O^-4 M), fulvic acid concentration (2–100 mg 1^-1), pH (3–8) and calcium concentration (10^-4–5 × 1O^-3 M) are given particular attention. The effects of statistical errors on the measurement of the values of the complex-formation parameters are considered. These parameters are measured for various surface-water samples, aqueous soil extracts, peat water and solutions of organic matter formed by in vitro decomposition of leaves. In general, these parameters vary little with actual source for a particular type of water.     

Ultraviolet absorbance titration for determining stability constants of humic substances with Cu(II) and Hg(II)

We describe an ultraviolet (UV) absorbance titration method that can be used to determine complexing capacities (C_L) and conditional stability constants (log K) of humic substances (HSs) with metal ions such as Cu(II) and Hg(II). Two fulvic acids (FA) and one humic acid (HA) were used for this study. UV absorbance of HSs gradually increased with the addition of Cu(II) or Hg(II) after blank correction, and these increases followed the theoretical 1:1 (ligand:metal ion) binding model. The results from the absorbance titration calculation for HSs with Cu(II) and Hg(II) compared well with those from fluorescence quenching titration. The titration of the model compound l-tyrosine with Cu(II) proved the validity of this method, and the K and C_L were within 2.3% and 7.4% of the fluorescence quenching titration. The results suggest that the UV absorbance titration can be used to study the binding capacities of HSs and/or dissolved organic matter (DOM) with trace metals. The advantages and disadvantages of the absorbance titration method were also discussed.     

Diethyldithiocarbamate (DDTC) extraction of copper(II) and iron(III) associated with humic substances in water

Summary The extraction behaviour of copper(II) and iron(III) was studied in the presence of humic substances (humic and fulvic acids) by using DDTC and chloroform. Copper-humic complexes were nearly completely extracted over the pH range 3–9, indicating that DDTC reacted with copper more strongly than humic substances. Iron-humic substances, mainly existing as hydrated iron(III) oxide covered with humic substances, were not extracted quantitatively (recovery <70%), though hydrated iron(III) oxide itself was extracted with greater than 93% yields at pH 5–9. For complete extraction of the humic species, ammonium pyrrolidinedithiocarbamate (APDC) was useful, because it allowed extraction from slightly acidic solutions where the binding of iron-humic substances became weak.     

Surface complexation of Pb(II) on amorphous iron oxide and manganese oxide: spectroscopic and time studies

Hydrous Fe and Mn oxides (HFO and HMO) are important sinks for heavy metals and Pb(II) is one of the more prevalent metal contaminants in the environment. In this work, Pb(II) sorption to HFO (Fe(2)O(3) x nH(2)O, n=1-3) and HMO (MnO(2)) surfaces has been studied with EXAFS: mononuclear bidentate surface complexes were observed on FeO(6) (MnO(6)) octahedra with PbO distance of 2.25-2.35 Angstrom and PbFe(Mn) distances of 3.29-3.36 (3.65-3.76) Angstrom. These surface complexes were invariant of pH 5 and 6, ionic strength 2.8 x 10(-3) to 1.5 x 10(-2), loading 2.03 x 10(-4) to 9.1 x 10(-3) mol Pb/g, and reaction time up to 21 months. EXAFS data at the Fe K-edge revealed that freshly precipitated HFO exhibits short-range order; the sorbed Pb(II) ions do not substitute for Fe but may inhibit crystallization of HFO. Pb(II) sorbed to HFO through a rapid initial uptake ( approximately 77%) followed by a slow intraparticle diffusion step ( approximately 23%) resulting in a surface diffusivity of 2.5 x 10(-15) cm(2)/s. Results from this study suggest that mechanistic investigations provide a solid basis for successful adsorption modeling and that inclusion of intraparticle surface diffusion may lead to improved geochemical transport depiction.     

Potentiometric study of Cd(II) and Pb(II) complexation with two high molecular weight poly(acrylic acids); comparison with Cu(II) and Ni(II)

The cadmium (II) or lead (II) complex formation with two poly(acrylic acids) of high molecular weight (Mw=2.5×10⁵ and 3×10⁶) was investigated in dilute aqueous solution (NaNO₃ 0.1 mol l⁻¹; 25°C). Potentiometric titrations were carried out to determine the stability constants of the MA and MA₂ complex species formed. Bjerrum’s method, modified by Gregor et al. (J. Phys. Chem. 59 (1955) 34–39), for the study of polymeric acids was used. The results were compared to those previously obtained in the same conditions with copper (II) and nickel (II) . It appeared that the two polymers under study present similar binding properties and that the stability constants of the complex species formed increased in the following order, depending on the metal ion: Ni(II)β₁₀₂ was found to be close to 7.0) and allowed the formation of the predominant PbA₂ species in a quite large pH domain. Finally, the greater stability of PAA complexes compared to those of their monomeric analogs, glutaric and acetic acids, was confirmed.     

Some theoretical and practical aspects in the separation of humic substances by combined liquid chromatography methods

Permanent need to understand nature, structure and properties of humic substances influences also separation methods that are in a wide scope used for fractionation, characterization and analysis of humic substances (HS). At the first glance techniques based on size-exclusion phenomena are the most useful and utilized for relating elution data to the molecular mass distribution of HS, however, with some limitations and exceptions, respectively, in the structural investigation of HS. The second most abundant separation mechanism is reversed-phase based on weak hydrophobic interactions beneficially combined with the step gradients inducing distinct features in rather featureless analytical signal of HS. Relatively great effort is invested to the developments of immobilized-metal affinity chromatography mimicking chelate-forming properties of HS as ligands in the environment. Surprisingly, relatively less attention is given to the ion-ion interactions based ion-exchange chromatography of HS. Chromatographic separation methods play also an important role in the examination of interactions of HS with pesticides. They allow us to determine binding constants and the other data necessary to predict the mobility of chemical pollutants in the environment. HS is frequently adversely acting in analytical procedures as interfering substance, so more detailed information is desired on manifestation of its numerous properties in analytical procedures. The article topic is covered by the review emphasizing advances in the field done in the period of last 10 years from 2000 till 2010.     

Kinetics and equilibrium study of nickel(II) complexation by pterin

The kinetics of complexation of Ni(II) by pterin was studied in aqueous solutions with a stopped‐flow apparatus under conditions of pseudo‐first order in the temperature range 5–45°C, pH between 4.0 and 6.5, and ionic strength 0.4 M. The equilibrium constants, stoichiometry, and pK_a of the ligand and complex were also determined using a spectrophotometric technique. The results are consistent with the formation of a 1:1 complex between the metal ion and pterin. The first‐order experimental rate constant k_app is pH independent and shows the following dependence with the ion metal concentration at 25°C: k_app/s⁻¹ = 3.8 × 10⁻³ + 1.6 × 10⁻⁴ × [Ni(II)]⁻¹. A global activation energy of 57 ± 2 kJ/mol associated with the formation of a 1:1 chelate was measured. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 231–237, 2000     

Determination of the complexation constants of Pb(II) and Cd(II) with thymol blue using spectrophotometry, SQUAD and the HSAB principle

This paper presents the results concerning the determination of the formation constants of the complexes between thymol blue, TB, and the metal ions Pb(II) or Cd(II). The experimental procedure was carried out in the presence of a nitrogen atmosphere at 25 degrees C. The spectrophotometry data obtained were processed through the software SQUAD to calculate the complexation constants of the metal-indicator and to establish an adequate base of the models which considered the structure of the indicator, and the actual metal species in the aqueous solutions. For the Pb(II)-TB-H2O system the logK value calculated for the PbTB complex was 5.591+/-0.057 while for the Cd(II)-TB-H2O system, the logK value of the CdTB complex was 5.099+/-0.008. Also, supporting theoretical chemistry results on the chemical hardness of TB molecule were performed to enable establishment of a relative prediction scale of the TB complexation constants ranking in the framework of the Principle of Hard and Soft Acids and Bases or HSAB Principle.     

Kinetics of complexation of nickel(II) by DL-isocitric acid

Summary The kinetics of complexation of Ni^II by isocitric acid have been studied with the stopped-flow method, at 15, 25 and 35°C, ionic strength 0.20 M (NaClO₄) and pH range 4.50–6.35. Under our experimental conditions, two processes are observed: the faster reaction takes place within the millisecond time range and the slower one within a few seconds.A mechanism is proposed to account for the observed behaviour. The rapid process is associated with the complexation itself and the slow one is associated with the deprotonation. For the latter process, the activation energy was determined.     

Investigation of Cd(II), Pb(II) and Cu(I) complexation by glutathione and its component amino acids by ESI-MS and size exclusion chromatography coupled to ICP-MS and ESI-MS

The elucidation of structures of glutathione (GSH) complexes play an important role in the fundamental understanding of biochemical pathways of metal ion deactivation in plants. This article attempts to feature key studies for stoichiometry of metal complexes with glutathione and its constituent amino acids to obtain a better understanding of the different metal affinities of the complexation sites of glutathione. The SEC-ICP-MS experiments have indicated that oxidation process of glutathione was accelerated by metal ion presence in following order Cu⁺, Pb²⁺ and Cd²⁺. The redox activity of metal ions was confirmed by ESI-MS experiments, which allowed to observe formation of glutathione disulphide (GSSG) in time. The stoichiometry of Cd²⁺, Cu⁺ and Pb²⁺ complexes with GSH was defined by observing the isotope pattern of investigated metals and hydrogen loss or transfer during binding. The complexes with metal bound to sulphur of 1:1 and 1:2 stoichiometry were found in case of cadmium and lead. The number of hydrogen atoms lost during metal binding and the SEC-ESI-MS results allowed to elucidate that copper is bound by GSSG in ratio 1:1 and 1:2. Additionally, size exclusion chromatography coupled to electrospray MS allowed to differentiate more stable complexes from weak ones that could be created in the gas phase.     

Posidonomia shales (FRG) and their relation to humic substances

Summary We have used capillary gas chromatography/mass spectrometry to characterize extracts of Posidonomia shales and of fossil wood (gagat) found in these shales. Samples were obtained from Dotternhausen oil shale formation (FRG) belonging to LIAS-epsilon (Toarcien). Identified components are n-alkanes (C₇ to C₂₇), isoprenoid hydrocarbons (like pristane and phytane) and cycloalkanes with 6 to 9 carbon atoms. Aromatic hydrocarbons were also found in the low boiling fraction of extracts of fossil wood. To obtain more detailed information about genesis and maturity of the Dotternhausen sediments we also applied Cross Polarisation Magic Angle Spin-¹³C-Nuclear Magnetic Resonance (CP/MAS-¹³C-NMR) spectroscopy. We compared the solid state spectra of fossil wood out of Posidonomia shales with the solid state¹³C-NMR-spectra of humic substances of different age and different origin. We found that the solid state spectra of humic substances of increasing age and the solid state spectra of fossil wood show striking similarity. The results are discussed with respect to the maturity of the Dotternhausen sediments and the genesis of fossil fuels where humic substances may act as intermediates. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Kinetic study of nickel(II) complexation by pteroylglutamic acid

The kinetics of the complexation of NiII by pteroylglutamic acid have been studied in the 545 ∘C range, the ionic strength (0.6 M) being regulated with KNO3, in the 5.5–7.0pH range, using the stopped-flow method. Under the experimental conditions two processes were observed. The faster process was detected in the millisecond range and is associated with the reaction between NiII and the ligand. The slower is observed within a few seconds. Complementary equilibrium studies were made at 25 ∘C. The results are consistent with the formation of a 1:1 complex between the reactants, and a mechanism is proposed to account for the observed behaviour. Equilibrium constants for the NiII plus pteroylglutamic acid system, as well as activation parameters, are reported. This revised version was published online in June 2006 with corrections to the Cover Date.