A simple and sensitive assay of gallic acid based on localized surface plasmon resonance light scattering of silver nanoparticles through modified Tollens process

A simple, low toxic, sensitive strategy based on the localized surface plasmon resonance light scattering (LSPR-LS) properties of silver nanoparticles (AgNPs) is introduced for the detection of gallic acid (GA). It was found that the silver ammonium complex, [Ag(NH(3))(2)](+)(aq), could be reduced in the alkaline medium by GA at room temperature; this reaction formed dispersed AgNPs. Transmission electron microscopy analyses were performed to ascertain the formation of AgNPs. UV-visible spectra revealed the localized surface plasmon resonance (LSPR) absorption at 410 nm corresponding to the LSPR of AgNPs. On these basis, we could quantify the GA concentration in the range of 4 × 10(-7) - 5 × 10(-6) mol L(-1) in the optimized experimental conditions. This method was used for determining the concentration of GA in artificial samples with satisfactory results. The detailed mechanism underlying this special phenomenon was elucidated.     

Synthesis of Plasmonic Group‐4 Nitride Nanocrystals by Solid‐State Metathesis

Ceramic nanoparticles that exhibit a plasmonic response are promising next‐generation photonic materials. In this contribution, a solid‐state metathesis method has been reported for the synthesis of Group 4 nitride (TiN, ZrN, and HfN) nanocrystals. A high‐temperature (1000 °C) reaction between Group 4 metal oxide (TiO₂, ZrO₂, and HfO₂) nanoparticles and magnesium nitride powder yielded nitride nanocrystals that were dispersible in water. A localized surface plasmonic resonance was observed in the near‐infrared region for TiN and in the visible region of light for ZrN and HfN nanocrystals. The frequency of the plasmon resonance was dependent on the refractive index of the solvent and the nanocrystal size.     

Reversible Modulation of Surface Plasmons in Gold Nanoparticles Enabled by Surface Redox Chemistry

Switchable surface redox chemistry is demonstrated in gold@iron/iron oxide core–shell nanoparticles with ambient oxidation and plasmon‐mediated reduction to modulate the oxidation state of shell layers. The iron shell can be oxidized to iron oxide through ambient oxidation, leading to an enhancement and red‐shift of the gold surface plasmon resonance (SPR). This enhanced gold SPR can drive reduction of the iron oxide shell under broadband illumination to reversibly blue‐shift and significantly dampen gold SPR absorption. The observed phenomena provide a unique mechanism for controlling the plasmonic properties and surface chemistry of small metal nanoparticles.     

Selective photocatalytic oxidation of aromatic alcohols to aldehydes in an aqueous suspension of gold nanoparticles supported on cerium(IV) oxide under irradiation of green light

Gold nanoparticles supported on cerium(IV) oxide powder showing strong absorption at around 550 nm due to surface plasmon resonance oxidized aromatic alcohols to corresponding aldehydes almost quantitatively in an aqueous suspension under irradiation of green light.     

Effects of High Pressure on the Surface Plasmon Resonance of Copper and Silver Nanocrystals

We used a diamond anvil cell(DAC) to control the deformation of synthesized copper nanorods and silver nanoparticles. And we measured the surface plasmon resonance of copper nanorods and silver nanoparticles, which exhibit redshifts or blueshifts. The surface plasmon resonance shows an abnormal blue shift for both copper nanorods and silver nanoparticles. The solvents of copper nanorods and silver nanoparticles are n-hexane and water, where the pressure loads include quasi-hydrostatic and non-hydrostatic.     

A localized surface plasmon resonance light scattering-based sensing of hydroquinone via the formed silver nanoparticles in system

In this contribution, a simple strategy for the detection of hydroquinone (HQ) is proposed based on the localized surface plasmon resonance light scattering (LSPR-LS) of the silver nanoparticles (AgNPs) formed through the modified silver mirror reaction. The redox reaction between HQ and silver ammonia occurred in the coexistence of sodium hydroxide and ammonia at room temperature, where silver ammonia was reduced by HQ and resulted in the formation of AgNPs without adding the AgNPs seeds. The formed AgNPs were demonstrated to be monodisperse and uniform by transmission electron microscopy (TEM) image. We also studied the localized surface plasmon resonance absorption (LSPR-A) and LSPR-LS spectra using both a UV-vis spectrophotometer and a common spectrofluorometer, and obtained a good agreement between experiments. By carefully optimizing the amount of NaOH and ammonia of the reaction conditions, we were able to obtain the highest net intensity of LSPR-LS on the concentrations of HQ. On the basis of experimental studies, the LSPR-LS intensity enhanced linearly over the range 0.4-2.5 μmol L(-1) with the corresponding limits of determination (3σ) of 70.6 nmol L(-1). With that, the present approach was applied to detect HQ in water samples with satisfactory results.     

基于局域表面等离子体共振效应的光学生物传感器*

贵金属纳米粒子表现出许多常规块体材料所不具备的优异性能,其中局域表面等离子体共振 (LSPR) 特性是研究热点之一。LSPR 的形状和位置与纳米粒子的组成、大小、形状、介电性质以及局域介质环境密切相关。基于这一特性,贵金属纳米粒子已广泛应用于光学生物传感器、光过滤器和表面增强光谱等领域。本文对各种结构的贵金属纳米粒子的制备方法及其在光学生物传感器中的应用进行了综述,并对 LSPR 纳米传感器的未来发展前景做了展望。     

Self-assembly of lysozyme on the surfaces of gold nanoparticles

The interaction of lysozyme(Lys) and gold nanoparticles was investigated via UV-vis absorption and resonance light-scattering method.There are some changes of the plasmon absorption and resonance light-scattering of gold nanoparticles that were observed via the addition of Lys.The normalized plasmon absorption and resonance light-scattering intensity with gold nanoparticles were both linear wilh 1-20 nmol/L Lys.A simple model about the component of the gold nanoparticles and Lys complex was established and the calculated result was fitted well in their concentration ratio.Furthermore,the activity analysis of Lys showed that the interaction was weak and nondestructive.     

Resonance surface plasmon spectroscopy: low molecular weight substrate binding to cytochrome p450

A new detection mechanism has been developed for low molecular weight substrate binding to heme proteins based on resonance localized surface plasmon spectroscopy. Cytochrome P450 has strong electronic transitions in the visible wavelength region. Upon binding of a substrate molecule (e.g., camphor), the absorption band of cytochrome P450 shifts to shorter wavelength. The event of camphor binding to a nanoparticle surface modified with cytochrome P450 protein receptors is monitored using UV-vis spectroscopy. It is observed for the first time that the binding of the substrate molecules to the protein receptor induces a blue-shift in the localized surface plasmon resonance (LSPR) of the nanosensors. The coupling between the molecular resonance of the substrate-free and substrate-bound cytochrome P450 proteins and the nanoparticles' LSPR leads to a highly wavelength-dependent LSPR response. When the LSPR of the nanoparticles is located at a wavelength distant from the cytochrome P450 resonance, an average of approximately 19 nm red-shift is observed upon cytochrome P450 binding to the nanoparticles and a approximately 6 nm blue-shift is observed upon camphor binding However, this response is significantly amplified approximately 3 to 5 times when the LSPR of the nanoparticles is located at a slightly longer wavelength than the cytochrome P450 resonance, that is, a 66.2 nm red-shift upon cytochrome P450 binding and a 34.7 nm blue-shift upon camphor binding. This is the first example of the detection of small molecules binding to a protein modified nanoparticle surface on the basis of LSPR.     

A unified view of propagating and localized surface plasmon resonance biosensors

The intense colors of noble metal nanoparticles have inspired artists and fascinated scientists for hundreds of years. In this review, we describe refractive index sensing platforms based on the tunability of the localized surface plasmon resonance (LSPR) of arrays of silver nanoparticles and of single nanoparticles. Specifically, the color associated with single nanoparticles and surface-confined nanoparticle arrays will be shown to be tunable and useful as platforms for chemical and biological sensing. Finally, the LSPR nanosensor will be compared to traditional, flat surface, propagating surface plasmon resonance sensors.     

Controllable synthesis and catalysis application of hierarchical PS/Au core-shell nanocomposites

Polystyrene (PS)/gold (Au) core-shell nanocomposites with tunable size, high stability, and excellent catalytic activity have been synthesized by a facile method that combines the ionic self-assembly with the in situ reduction. The composition and stoichiometry, as well as its morphology and optical properties of these nanocomposites have been examined and verified by various characterization techniques. The size and the coverage of gold nanoparticles (NPs) can be simply tailored by changing the amount of 3-aminopropyltrimethoxysilane (APTES), the functionalization time, the protonation time, and the amount of chloroauric acid (HAuCl₄). The continuous red shifts of the localized surface plasmon resonance absorption of the Au NPs on the PS spheres are observed. Importantly, the obtained Au NPs with controllable and uniform size on the surfaces of amino-functionalized PS spheres exhibit excellent size-dependent catalytic properties for the reduction of 4-nitrophenol (4-NP) by NaBH₄.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Au nanoparticle monolayers covered with sol-gel oxide thin films: optical and morphological study

In this work, we provide a detailed study of the influence of thermal annealing on submonolayer Au nanoparticle deposited on functionalized surfaces as standalone films and those that are coated with sol-gel NiO and TiO(2) thin films. The systems are characterized through the use of UV-vis absorption, X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), and spectroscopic ellipsometry. The surface plasmon resonance peak of the Au nanoparticles was found to red-shift and increase in intensity with increasing surface coverage, an observation that is directly correlated to the complex refractive index properties of Au nanoparticle layers. The standalone Au nanoparticles sinter at 200 °C, and a relationship between the optical properties and the annealing temperature is presented. When overcoated with sol-gel metal oxide films (NiO, TiO(2)), the optical properties of the Au nanoparticles are strongly affected by the metal oxide, resulting in an intense red shift and broadening of the plasmon band; moreover, the temperature-driven sintering is strongly limited by the metal oxide layer. Optical sensing tests for ethanol vapor are presented as one possible application, showing reversible sensing dynamics and confirming the effect of Au nanoparticles in increasing the sensitivity and in providing a wavelength dependent response, thus confirming the potential use of such materials as optical probes.     

Localized surface plasmon resonance: nanostructures, bioassays and biosensing--a review

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles (NPs) that are smaller than the incident wavelength. As in surface plasmon resonance, the electric field of incident light can be deposited to collectively excite electrons of a conduction band, with the result being coherent localized plasmon oscillations with a resonant frequency that strongly depends on the composition, size, geometry, dielectric environment and separation distance of NPs. This review serves to describe the physical theory of LSPR formation at the surface of nanostructures, and the potential for this optical technology to serve as a basis for the development bioassays and biosensing of high sensitivity. The benefits and challenges associated with various experimental designs of nanoparticles and detection systems, as well as creative approaches that have been developed to improve sensitivity and limits of detection are highlighted using examples from the literature.     

In-situ polymerized molecularly imprinted polymeric thin films used as sensing layers in surface plasmon resonance sensors: Mini-review focused on 2010–2011

This review provides a short overview of polymeric thin films incorporating molecular imprints within their 3D macromolecular structure as synthetic recognition elements and prepared by in situ polymerization for surface plasmon resonance application. This review starts with a brief reminder of the principle of surface plasmon resonance detection. The second section is focused on molecularly imprinted materials. Bulk and thin film polymer formats can be obtained by free radical polymerization, where the functional monomer interacts specifically with the template and the cross-linker controls the rigidity of the imprinted cavities. Grafting polymerization is presented as a method of choice for covalent attachment of ultra-thin molecularly imprinted films on a surface plasmon resonance metallic substrate. Examples of electropolymerized thin films are also provided. In the rest of this contribution, surface plasmon resonance applications of molecularly imprinted polymers reported mainly over the last two years are presented with respect to the preparation mode. Also, applications of gold nanoparticle/molecularly imprinted polymer composites for the design of surface plasmon resonance-based sensors with enhanced sensitivity due to the phenomenon of localized surface plasmon resonance induced by the presence of gold nanoparticles are summarized.     

Janus particles with a functional gold surface for control of surface plasmon resonance

We report in this study the presence of Janus particles, which are candidates for use with electronic color papers. We used negatively charged polystyrene particles (370 nm) as the core particles, and gold was then sputtered onto their packed monolayer under several conditions. The sputtered particles were next redispersed into the aqueous medium by gentle sonication. Gold nanoparticles localized on one side of the cores could also serve as seeds for subsequent shell growth by electroless gold plating. Through these treatments, a series of well-dispersed Janus particles were obtained with gold nanostructures of different size and shape only on one side. Their dispersions showed different colors originating from the surface plasmon resonance absorption of gold nanoparticles localized on the hemisphere. The particles obtained by this approach have potential applications such as in sensors and electronic color paper.     

Preparation of silver/graphene/polymer hybrid microspheres and the study of photocatalytic degradation

Three-dimensional silver/graphene/polymer hybrid microspheres were prepared to depress the aggregation of two-dimensional graphene. Graphene oxide (GO) sheets were successfully wrapped on the surface of amine-functionalized polystyrene-poly (glycidyl methacrylate) (PS-PGMA) microspheres (～3 μm in diameter) to form graphene oxide/amino-microsphere (GO/AMS) core–shell structure. Subsequently, the wrapped GO sheets were reduced by using hydrazine hydrate as the reducing agents, meanwhile decorated with silver nanoparticles on the wrinkled surface to form Ag-rGO/AMS hybrid microspheres with monodisperse distributions in shape and diameter. The resulting materials were characterized by power X-ray diffraction, scanning electron microscope, Raman spectra, and ultraviolet–visible (UV–vis) absorption spectra. Since Ag nanoparticles behave surface plasmon resonance effect and rGO structure can improve the separation of photogenerated electrons and holes, the Ag-rGO/AMS composites present good photocatalytic activities for the degradation of methylene blue (MB) as 93 % MB were degraded after 2.5 h under irradiation.     

Enhanced Photocurrent Generation in Self-Assembled Monolayers Formed at Plasmonic Gold Nanostructures

The effect of localized surface plasmon resonance (SPR) appearing at the surfaces of gold nanoparticles (AuPs) was successfully applied for the enhancement of photocurrents from porphyrin ( Po ) immobilized on AuPs. The electrode consisting of AuPs with different sizes (∼15 or ∼35 nm) was prepared using the AuP film formed at the liquid/liquid interface, and then Po was self-assembled on the gold surface. The SPR effect for the AuP film was verified from the attenuated total reflection SPR and absorption measurements. Photocurrents from the modified electrodes were compared with the corresponding planar electrode. Appreciable enhancement of photocurrents was observed.     

Localized surface plasmon resonance sensing detection of glucose in the serum samples of diabetes sufferers based on the redox reaction of chlorauric acid

In this paper, the formation of gold nanoparticles (Au NPs) as a result of the thermo-active redox reaction of chlorauric acid (HAuCl₄) and glucose in alkaline medium was identified by measuring the plasmon resonance absorption, localized surface plasmon resonance (LSPR), and transmission electron microscopy (TEM) images, for the formation of Au NPs displays characteristic plasmon resonance absorption bands and corresponding LSPR signals. It was found that the resulted LSPR signals could be easily detected with a common spectrofluorometer. With increasing glucose concentration, the LSPR intensity displays linear response with the glucose content over the range from 2.0 to 250.0 μmol l⁻¹. Thus, a novel assay of glucose was established with the limits of determination (3σ) being 0.21 μmol l⁻¹, and the detection of glucose could be made easily in the serum samples of diabetes sufferers. Mechanism investigations showed that the activation energy and molar ratio of the reaction were 34.8 kJ mol⁻¹ and 3:2, respectively.     

Interaction of plasmon and molecular resonances for rhodamine 6G adsorbed on silver nanoparticles

Localized surface plasmon resonance (LSPR) is a key optical property of metallic nanoparticles. The peak position of the LSPR for noble-metal nanoparticles is highly dependent upon the refractive index of the surrounding media and has therefore been used for chemical and biological sensing. In this work, we explore the influence of resonant adsorbates on the LSPR of bare Ag nanoparticles (lambda(max,bare)). Specifically, we study the effect of rhodamine 6G (R6G) adsorption on the nanoparticle plasmon resonance because of its importance in single-molecule surface-enhanced Raman spectroscopy (SMSERS). Understanding the coupling between the R6G molecular resonances and the nanoparticle plasmon resonances will provide further insights into the role of LSPR and molecular resonance in SMSERS. By tuning lambda(max,bare) through the visible wavelength region, the wavelength-dependent LSPR response of the Ag nanoparticles to R6G binding was monitored. Furthermore, the electronic transitions of R6G on Ag surface were studied by measuring the surface absorption spectrum of R6G on an Ag film. Surprisingly, three LSPR shift maxima are found, whereas the R6G absorption spectrum shows only two absorption features. Deconvolution of the R6G surface absorption spectra at different R6G concentrations indicates that R6G forms dimers on the metal surface. An electromagnetic model based on quasi-static (Gans) theory reveals that the LSPR shift features are associated with the absorption of R6G monomer and dimers. Electronic structure calculations of R6G under various conditions were performed to study the origin of the LSPR shift features. These calculations support the view that the R6G dimer formation is the most plausible cause for the complicated LSPR response. These findings show the extreme sensitivity of LSPR in elucidating the detailed electronic structure of a resonant adsorbate.