Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

On the applicability of cluster models to study the chemical reactivity of carbon nanotubes

We have performed a comparative study on the reactivity of metallic and semiconducting nanotubes using infinite and finite models. Infinite models were created using periodic boundary conditions while finite ones were constructed by means of hydrogen terminated nanotubes sections. Cluster models systematically underestimate the reactivity of metallic single wall carbon nanotube (SWCNT)s. We have confirmed that metallic nanotubes are more reactive than semiconducting species, in disagreement with previous works. The differences can be attributed to the presence of an instability in the singlet ground state of the wavefunction corresponding to semiconducting nanotubes clusters. When lower electronic states of the pristine cluster are considered, semiconducting nanotubes become less reactive as compared with metallic SWCNTs. Particularly, if an antiferromagnetic solution is considered for the semiconducting (10,0) SWCNT cluster, it becomes less reactive than the (5,5) SWCNT, as observed for infinite models. Because semiconducting nanotubes are less reactive than metallic counterparts, their reaction energies converge faster to the values observed for graphene. For a 1.6-nm diameter semiconducting nanotube, the addition energy is comparable with graphene. Thus, semiconducting nanotubes with diameters larger than 1.6 nm are going to be as reactive as graphene and the effects of curvature will be unimportant.     

Structure-dependent reactivity of semiconducting single-walled carbon nanotubes with benzenediazonium salts

The addition of diazonium salts to single-walled carbon nanotubes (SWCNTs) in aqueous surfactant suspensions quenches the intrinsic near-infrared fluorescence of semiconducting SWCNTs through sidewall chemical reactions. Spectrally resolved fluorescence spectroscopy of mixed SWCNT samples has been used to measure structure-dependent relative reactivities in the initial stages of these reactions. For several 4-substituted benzenediazonium salts, Ar-R (Ar = N 2 (+)-C 6H 4 and R = Cl, NO 2, OMe), reactivities at pH 10 were found to be greatest for SWCNTs having the largest band gaps. The magnitude of this band gap dependence varies according to the R-group of the salt, with R = OMe showing the strongest variation. For R = OH, acidification of the sample to pH 5.5 results in reversal of the structural trend, as smaller band gap SWCNTs show slightly greater reactivities. The derivatization reactions observed here proceed concurrently, although at different rates, for semiconducting and metallic SWCNT species. These results therefore provide insight into the difficulties of separating metallic and semiconducting SWCNTs through selective reaction schemes and underscore the need for fluorescence spectroscopy to be used in assessing semiconducting SWCNT reactions.     

单壁碳纳米管的电子速度及有效质量

利用单壁碳纳米管(SWCNTs)能量色散关系, 计算了最低导带的电子速度和有效质量, 重点讨论了SWCNTs中最低导带电子速度和有效质量与波矢及管径大小的关系. 结果表明, 半导体型锯齿SWCNTs的电子速度和有效质量与其结构参量(管径)有直接的关系. 各种椅型SWCNTs(金属型)和金属型锯齿SWCNTs最低导带电子速度和有效质量随波矢的变化规律分别相同, 各种半导体型锯齿SWCNTs最低导带电子速度和有效质量随波矢的变化规律则有明显差别. 这意味着在低偏压下, 不同管径的椅型SWCNTs和金属型锯齿SWCNTs输运性能相同, 而各种不同管径半导体型锯齿SWCNTs输运性能有明显差别.     

Sexithiophene Encapsulated in a Single‐Walled Carbon Nanotube: An In Situ Raman Spectroelectrochemical Study of a Peapod Structure

The interaction of single‐walled carbon nanotubes (SWCNTs) and α‐sexithiophene (6T) was studied by Raman spectroscopy and by in situ Raman spectroelectrochemistry. The encapsulation of 6T in SWCNT and its interaction causes a bleaching of its photoluminescence, and also small shifts of its Raman bands. The Raman features of the SWCNT with embedded 6T (6T‐peapods) change in both intensity and frequency compared to those of pristine SWCNT, which is a consequence of a change of the resonant condition. Electrochemical doping demonstrated that the electrode potential applied to the SWCNT wall causes changes in the embedded 6T. The effects of electrochemical charging on the Raman features of pristine SWCNT and 6T@SWCNT were compared. It is shown that the interaction of SWCNT with 6T also changes the electronic structure of SWCNT in its charged state. This change of electronic structure is demonstrated both for semiconducting and metallic tubes.     

Capacitive and Charge Transfer Effects of Single-Walled Carbon Nanotubes in TiO2 Electrodes

The transfer of nanoscale properties from single-walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations. The liquid fractions show clear variations in their optical absorbance spectra, indicating differences in the metallic/semiconducting character and the diameter of the SWCNTs. Also, changes in the surface chemistry and the electrical resistance are evidenced in SWCNT solid films. The starting SWCNT sample and the fractions as well are used to prepare hybrid electrodes with titanium dioxide (SWCNT/TiO₂). Raman spectroscopy reflects the optoelectronic properties of SWCNTs in the SWCNT/TiO₂ electrodes, while the electrochemical behavior is studied by cyclic voltammetry. A selective development of charge transfer characteristics and double-layer behavior is achieved through the suitable choice of SWCNT fractions.     

Improvement of SWCNT transparent conductive films via transition metal doping

To realize transparent conductive films based on single-walled carbon nanotubes (SWCNTs), we applied a spray coating process with transition metal doping to SWCNT networks. Schottky contacts between metallic and semiconducting SWCNTs changed to Ohmic contacts due to the reduction of metals on the SWCNT surfaces via direct conversion from solution.     

超声分散对单壁碳纳米管分离的影响

利用凝胶柱色谱技术, 研究者们通过两步或多步淋洗的方法实现了不同导电属性或电子结构单壁碳纳米管(SWCNTs)的分离, 并提出其分离机制主要是由不同导电属性和电子结构的SWCNTs 与凝胶填料之间作用力的差异所导致的. 基于凝胶柱色谱分离技术, 本文重点考察了超声时间对单壁碳纳米管单分散以及金属型/半导体型SWCNTs 分离的影响. 在一定的低超声功率下, 适当增加超声时间有利于SWCNTs 在十二烷基硫酸钠(SDS)溶液中的单分散. 紫外-可见-近红外(UV-Vis-NIR)吸收光谱、拉曼(Raman)光谱和荧光(PL)光谱表征结果表明, 2 h的超声条件是获得高纯度的金属型以及不同直径分布的半导体型SWCNTs 的最优条件. 我们认为不同超声时间对SWCNTs 分离的影响主要是改变了SWCNTs 的单分散性和长度, 调制了不同SWCNTs 与凝胶之间作用力的差异, 从而导致了不同SWCNTs分离结果.     

Nerve agents interacting with single wall carbon nanotubes: Density functional calculations

First-principles calculations based on density functional theory (DFT) method are used to investigate the adsorption properties of nerve agent DMMP on typical zigzag (semiconducting) and armchair (metallic) single wall carbon nanotubes (SWCNTs). The adsorption energies for DMMP molecule on different adsorption sites on SWCNTs are obtained. The results indicate that DMMP is weakly bound to the outer surface of both the considered SWCNTs and the obtained adsorption energy values and binding distances are typical for the physisorption. We find that DMMP adsorptive capability of metallic CNTs is about twofold that of semiconducting one. The adsorption of DMMP on the higher chiral angle nanotubes was also investigated and the results indicate that nanotube’s chirality increases the adsorption capability of the tube but however the adsorption characteristic is typical for the physisorption. Furthermore, co-adsorption of two DMMP molecules on the SWCNTs as a single-layer/bi-layer of adsorbed molecules as well as the adsorption of one DMMP molecule on the CNT bundles consisting of three SWCNTs has also been examined. The obtained results reveal that for both the considered systems the binding energy was increased for the DMMP adsorption but it’s still typical for the physisorption, consistent with the recent experimental result. The study of the electronic structures and charge analysis indicate that no significant hybridization between the respective orbital takes place and the small interaction obtained quantitatively in terms of binding energies.     

单壁碳纳米管的手性测量

单壁碳纳米管的制备方法主要包括物理法和化学法两种,不同制备方法的产物中包含很多种不同手性指数的单壁碳纳米管及杂质,而不同手性的单壁碳纳米管其作用完全不同,从而有不同的应用。采用化学方法——钴钼催化剂气相沉积法和物理方法——激光烧蚀气相沉积法制备单壁碳纳米管,用紫外–可见–近红外吸收光谱、荧光光谱及拉曼光谱法分别对其进行手性测量。结果表明,钴钼催化剂气相沉积法制得样品富含半导体型单壁碳纳米管,而激光烧蚀气相沉积法制得样品中主要为金属型单壁碳纳米管。分别得到了两种制备方法样品的手性分布。     

Selective polycarboxylation of semiconducting single-walled carbon nanotubes by reductive sidewall functionalization

The efficient and controllable synthesis, the detailed characterization, and the chemical postfunctionalization of polycarboxylated single-walled carbon nanotubes SWCNT(COOH)(n) are reported. This innovative covalent sidewall functionalization method is characterized by (a) the preservation of the integrity of the entire σ-framework of SWCNTs; (b) the possibility of achieving very high degrees of addition; (c) control of the functionalization degrees by the variation of the reaction conditions (reaction time, ultrasonic treatment, pressure); (d) the identification of conditions for the selective functionalization of semiconducting carbon nanotubes, leaving unfunctionalized metallic tubes behind; (e) the proof that the introduced carboxylic acid functionalities can serve as versatile anchor points for the coupling to functional molecules; and (f) the application of a subsequent thermal degradation step of the functionalized semiconducting tubes leaving behind intact metallic SWCNTs. Functional derivatives have been characterized in detail by means of Raman, UV-vis/nIR, IR, and fluorescence spectroscopy as well as by thermogravimetric analysis combined with mass spectrometry, atomic force microscopy, and zeta-potential measurements.     

一维碳纳米管/二维二硫化钼混合维度异质结的原位制备及其电荷转移性能

一维(1D)材料与二维(2D)材料的结合可形成独特的混合维度异质结,其在继承2D/2D范德瓦尔斯异质结的独特物性之外,还具有丰富的堆叠构型,为进一步调控异质结的结构及性能提供了新的可操控自由度。p型1D单壁碳纳米管(SWCNT)与n型2D二硫化钼(MoS₂)的结合,为调控异质结的能带结构及器件性能提供了丰富的选择。本文直接在高密度、手性窄分布的SWCNT定向阵列及无序薄膜表面原位生长MoS₂,制备出高质量1D SWCNT/2D MoS₂混合维度异质结。深入分析形核点的表面形貌与结构,提出了“吸附-扩散-吸附”生长机制,用于解释混合维度异质结的生长。利用拉曼光谱分析,证实SWCNT与MoS₂间存在显著的电荷转移作用,载流子可在界面处快速传输,为后续基于此类1D/2D异质结的新型电子及光电器件的设计与制备提供了新思路。     

First-principles calculation on the conductance of a single 1,4-diisocyanatobenzene molecule with single-walled carbon nanotubes as the electrodes

The conductance of a single 1,4-diisocyanatobenzene molecule sandwiched between two single-walled carbon nanotube (SWCNT) electrodes are studied using a fully self-consistent ab initio approach which combines nonequilibrium Green's function formalism with density functional theory calculations. Several metallic zigzag and armchair SWCNTs with different diameters are used as electrodes; dangling bonds at their open ends are terminated with hydrogen atoms. Within the energy range of a few eV of the Fermi energy, all the SWCNT electrodes couple strongly only with the frontier molecular orbitals that are related to nonlocal pi bonds. Although the chirality of SWCNT electrodes has significant influences on this coupling and thus the molecular conductance, the diameter of electrodes, the distance, and the torsion angle between electrodes have only minor influences on the conductance, showing the advantage of using SWCNTs as the electrodes for molecular electronic devices.     

Selective oxidation on metallic carbon nanotubes by halogen oxoanions

Chlorine oxoanions with the chlorine atom at different oxidation states were introduced in an attempt to systematically tailor the electronic structures of single-walled carbon nanotubes (SWCNTs). The degree of selective oxidation was controlled systematically by the different oxidation state of the chlorine oxoanion. Selective suppression of the metallic SWCNTs with a minimal effect on the semiconducting SWCNTs was observed at a high oxidation state. The adsorption behavior and charge transfer at a low oxidation state were in contrast to that observed at a high oxidation state. Density functional calculations demonstrated the chemisorption of chloro oxoanions at the low oxidation state and their physisorption at high oxidation states. These results concurred with the experimental observations from X-ray photoelectron spectroscopy. The sheet resistance of the SWCNT film decreased significantly at high oxidation states, which was explained in terms of a p-doping phenomenon that is controlled by the oxidation state.     

Tailoring electronic structures of carbon nanotubes by solvent with electron-donating and -withdrawing groups

Various electron-donating and -withdrawing groups in aromatic and aliphatic backbones of solvent have been introduced to tailor the electronic structures of single-walled carbon nanotubes (SWCNTs). In the case of solvent with a withdrawing group, electrons were extracted mainly from metallic SWCNTs, whereas small charge transfer was also observed in semiconducting SWCNTs. On the other hand, in the case of solvent with a donating group, electrons were donated to both metallic and semiconducting SWCNTs. This effect was less prominent in solvent with an aliphatic backbone than that with an aromatic backbone. The strong correlation between the sheet resistance and electronic structures of nanotubes is further discussed in conjunction with a modulation of Schottky barrier height.     

First-principles study of a new type nanojunction: Finite length carbon chain inserted into half of a carbon nanotube

Based on first-principles calculations, we investigate the structure and electronic properties of a carbon atomic chain in finite length inserted into half of a single walled carbon nanotube (SWCNT), which we called half chain@SWCNT or more generally HCS. Comparing the optimized structure of HCS with that of the same chiral indices SWCNT and all carbon chain inserted SWCNT, we find that the geometry of the tube in HCS is slightly altered due to the weakly interacting between the inserted chain and the outer tube wall of HCS. Our calculation of band structure indicates that the armchair (5, 5) HCS exhibits metallic character, which is as that of (5, 5) SWCNT and all carbon chain inserted (5, 5) SWCNT. The zigzag (8, 0) and (9, 0) HCSs have small change in the energy gap compared to the corresponding pristine ones. Due to the downshift of conduction bands originating from the carbon chain, the calculation of band structure shows that chiral (6, 4) HCS is a semiconductor system with a small band gap of 0.94 eV, less than 1.125 eV in pristine SWCNT. The studied HCSs with unique structure and electronic property may construct a new generation nanoscale junctions without the usual heptagon–pentagon defect pair considerations.     

Fluorimetric characterization of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) are a family of structurally related artificial nanomaterials with unusual properties and many potential applications. Most SWCNTs can emit spectrally narrow near-IR fluorescence at wavelengths that are characteristic of their precise diameter and chiral angle. Near-IR fluorimetry therefore offers a powerful approach for identifying the structural species present in SWCNT samples. Such characterization is increasingly important for nanotube production, study, separation, and applications. General-purpose and specialized instruments suitable for SWCNT fluorimetric analysis are described, and methods for interpreting fluorimetric data to deduce the presence and relative abundances of different SWCNT species are presented. Fluorescence methods are highly effective for detecting SWCNTs in challenging samples such as complex environmental or biological specimens because of the methods’ high sensitivity and selectivity and the near absence of interfering background emission at near-IR wavelengths. Current limitations and future prospects for fluorimetric characterization of SWCNTs are discussed.     

DFT calculations of structures, 13C NMR chemical shifts,and Raman RBM mode of simple models of small‐diameter zigzag (4,0) carboxylated single‐walled carbon nanotubes

Linearly conjugated benzene rings (acenes), belt‐shaped molecules (cyclic acenes), and models of single‐walled carbon nanotubes (SWCNTs) with one carboxylic group at the open end were fully optimized at the B3LYP/6‐31G* level of theory. These models were selected to obtain some insight into the nuclear isotropic changes resulting from systematically increasing the basic building units of open‐tip‐monocarboxylated SWCNTs. In addition, the position of radial breathing mode (RBM), empirically correlated with the SWCNT diameter, was directly related with the radius of model cyclic acene rings. A regular convergence of selected structural, NMR, and Raman parameters with the molecular system size increase was observed, and a simple two‐parameter mathematical formula enabled their estimation in infinity. The predicted ¹³C NMR chemical shifts of carbon atoms close to the substituted rim of carboxylated models of zigzag (4,0) SWCNTs differed significantly from the pristine nanotubes. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbon chains and the (5,5) single-walled nanotube: structure and energetics versus length

Reliable thermochemistry is computed for infinite stretches of pure-carbon materials including acetylenic and cumulenic carbon chains, graphene sheet, and single-walled carbon nanotubes (SWCNTs) by connection to the properties of finite size molecules that grow into the infinitely long systems. Using ab initio G3 theory, the infinite cumulenic chain (:C[double bond]C[double bond]C[double bond]C:) is found to be 1.9+/-0.4 kcal/mol per carbon less stable in free energy at room temperature than the acetylenic chain (.C[triple bond]C-C[triple bond]C.) which is 24.0 kcal/mol less stable than graphite. The difference between carbon-carbon triple, double, and single bond lengths (1.257, 1.279, and 1.333 A, respectively) in infinite chains is evident but much less than with small hydrocarbon molecules. These results are used to evaluate the efficacy of similar calculations with the less rigorous PM3 semiempirical method on the (5,5) SWCNT, which is too large to be studied with high-level ab initio methods. The equilibrium electronic energy change for C(g)-->C[infinite (5,5) SWCNT] is -166.7 kcal/mol, while the corresponding free energy change at room temperature is -153.3 kcal/mol (6.7 kcal/mol less stable than graphite). A threefold alternation (6.866, 6.866, and 6.823 A) in the ring diameter of the equilibrium structure of infinitely long (5,5) SWCNT is apparent, although the stability of this structure over the constant diameter structure is small compared to the zero point energy of the nanotube. In general, different (n,m) SWCNTs have different infinite tube energetics, as well as very different energetic trends that vary significantly with length, diameter, and capping.     

Near-infrared fluorescence spectroscopy of single-walled carbon nanotubes and its applications

Semiconducting single-walled carbon nanotubes (SWCNTs) emit fluorescence at near-infrared (NIR) wavelengths that are characteristic of the specific diameter and the chiral angle. While providing a convenient method for structural identification of semiconducting SWCNTs, NIR fluorescence of SWCNTs also offers a powerful approach for sensor development and in vivo or real-time imaging of biological systems.This article provides an introductory overview of the approaches to obtaining individually dispersed semiconducting SWCNTs with reasonably good purity, which is a critical step in acquiring NIR fluorescence spectra. It also summarizes the progress since 2002 in sensor design and applications in bioimaging in vitro and in vivo using NIR fluorescence of semiconducting SWCNTs.