Anion binding and transport by steroid-based receptors

The steroid nucleus is well-established as a scaffold for anion receptors. The bile acids are especially useful, providing inexpensive starting points with helpful substitution patterns. This article describes developments since an earlier review in 2003. Included are podand and cyclic structures, uncharged and positive receptors, and various arrays of H-bond donor and other binding functionality. Applications have been found in anion sensing, selective extractions, transport across bilayer membranes, and the discovery of antibiotics.     

Anion binding by fluorescent biimidazole diamides

Six 2,2'-biimidazoles with various amide groups at the 4- and 4'-positions were prepared from 5-propyl-1H-imidazole-4-carboxylic acid ethyl ester. In the final step of the synthesis, biimidazole C2-C2' bond formation was accomplished in 33-45% yield by palladium(0)-catalyzed homocoupling of the corresponding 2-iodoimidazoles. Four of the biimidazoles were studied by X-ray diffraction. In the solid state, all display coplanar imidazole rings, an anti relationship of amide groups, and intramolecular (NH(amide).N(imid)) and intermolecular (NH(imid).O(amide)) hydrogen bonding. In CH(2)Cl(2), the emission intensity of the biimidazoles is quenched by the presence of dihydrogenphosphate and chloride anions, but no shifts in lambda(emiss) are observed. Binding constants for 1:1 biimidazole-anion complexation (K(assoc)) are on the order of 10(4) M(-)(1) for H(2)PO(4)(-) and Cl(-). One of the receptors (bearing 3,5-difluorobenzylamides) is selective for chloride. The participation of the amide NH atoms in anion binding was established by (1)H NMR.     

NMR study of strontium binding by a micaceous mineral

The nature of strontium binding by soil minerals directly affects the transport and sequestration/remediation of radioactive strontium species released from leaking high-level nuclear waste storage tanks. However, the molecular-level structure of strontium binding sites has seldom been explored in phyllosilicate minerals by direct spectroscopic means and is not well-understood. In this work, we use solid-state NMR to analyze strontium directly and indirectly in a fully strontium-exchanged synthetic mica of nominal composition Na(4)Mg(6)Al(4)Si(4)O(20)F(4). Thermogravimetric analysis, X-ray diffraction analysis, and NMR evidence supports that heat treatment at 500 degrees C for 4 h fully dehydrates the mica, creating a hydrogen-free interlayer. Analysis of the strontium NMR spectrum of the heat-treated mica shows a single strontium environment with a quadrupolar coupling constant of 9.02 MHz and a quadrupolar asymmetry parameter of 1.0. These quadrupolar parameters are consistent with a highly distorted and asymmetric coordination environment that would be produced by strontium cations without water in the coordination sphere bound deep within the ditrigonal holes. Evidence for at least one additional strontium environment, where proton-strontium couplings may occur, was found via a (1)H-(87)Sr transfer of populations by double resonance NMR experiment. We conclude that the strontium cations in the proton-free interlayer are observable by (87)Sr NMR and bound through electrostatic interactions as nine coordinate inner-sphere complexes sitting in the ditrigonal holes. Partially hydrated strontium cations invisible to direct (87)Sr NMR are also present and located on the external mica surfaces, which are known to hydrate upon exposure to atmospheric moisture. These results demonstrate that modern pulsed NMR techniques and high fields can be used effectively to provide structural details of strontium binding by phyllosilicate minerals.     

Anion binding by a tetradipicolylamine-substituted resorcinarene cavitand

Anion binding has been achieved with a resorcinarene substituted with four 2,2'-dipicolylamine moieties on the upper rim. The four dipicolylamine groups reside in proximity on one rim of the cavitand. The dipicolylamine groups were protonated with triflic acid to provide the cationic ammonium sites for anion binding. This anion receptor binds strongly to anions of different geometries, such as H(2)PO(4)(-), Cl(-), F(-), CH(3)CO(2)(-), HSO(4)(-), and NO(3)(-). The association constants for binding these anions are large, on the order of log K = 5 in CD(3)CN, a solvent of intermediate dielectric constant. These values represent significant binding compared to other cavitands with nitrogen pendant groups. Evidence suggests that the cavitand provides two identical receptor sites formed by two dipicolylamine groups, facilitating the simultaneous binding of two anions. Intramolecular binding of anions between two protonated dipicolylamine groups is indicated on the basis of the comparison to a structurally similar monomeric analogue and by semiempirical PM3 molecular modeling. Titrations with the analogue result in much weaker anion association, even at high concentrations, indicating the importance of proximity and preorganization of sites on the cavitand upper rim.     

Anion binding by fluorescent Fmoc-protected amino acids

Two non-natural amino acids with fluorescent urea side-chains were prepared from Fmoc-protected aspartic and glutamic acids. In acetonitrile solution, the emission of the Asp derivative is strongly quenched by HCO₃^?  or H₂PO₄^?  (K ≥ 10⁴ M^? 1) but not by less-basic Cl^?  or NO₃^? . Solutions containing excess bicarbonate ion appear peach-colored, with λ_abs at 394 and 495 nm ascribed to the anion complex and urea-deprotonated sensor, respectively. Corresponding fluorescence bands are observed at 475 and 579 nm. Dihydrogenphosphate is not sufficiently basic to remove H⁺ from the ground state of the fluorophore. However, deprotonation of the excited state occurs in the presence of>1 equiv of H₂PO₄^?  (λ_em = 578 nm). According to ¹H NMR in DMSO-d₆, recognition of H₂PO₄^?  occurs at the urea N–H groups and the amino acid backbone N–H. DFT techniques further predict that the backbone C = O group accepts an H-bond from the anion. The Glu derivative has lower affinity for anions; the additional CH₂ group in its side-chain apparently sets the backbone N–H and C = O too far from the urea to contribute significantly to binding. To demonstrate suitability for standard Fmoc-based solid-phase peptide synthesis, the Asp derivative was incorporated into a 12-residue peptide.     

Topographic, electrochemical, and optical images captured using standing approach mode scanning electrochemical/optical microscopy

We developed a high-resolution scanning electrochemical microscope (SECM) for the characterization of various biological materials. Electrode probes were fabricated by Ti/Pt sputtering followed by parylene C-vapor deposition polymerization on the pulled optical fiber or glass capillary. The effective electrode radius estimated from the cyclic voltammogram of ferrocyanide was found to be 35 nm. The optical aperture size was less than 170 nm, which was confirmed from the cross section of the near-field scanning optical microscope (NSOM) image of the quantum dot (QD) particles with diameters in the range of 10-15 nm. The feedback mechanism controlling the probe-sample distance was improved by vertically moving the probe by 0.1-3 microm to reduce the damage to the samples. This feedback mode, defined as "standing approach (STA) mode" (Yamada, H.; Fukumoto, H.; Yokoyama, T.; Koike, T. Anal. Chem. 2005, 77, 1785-1790), has allowed the simultaneous electrochemical and topographic imaging of the axons and cell body of a single PC12 cell under physiological conditions for the first time. STA-mode feedback imaging functions better than tip-sample regulation by the conventionally available AFM. For example, polystyrene beads (diameter approximately 6 microm) was imaged using the STA-mode SECM, whereas imaging was not possible using a conventional AFM instrument.     

Anion binding in aqueous media by a tetra-triazolium macrocycle

Three tetra-triazole macrocycles were synthesized in good yields by the copper(i)-catalysed cycloaddition of bis-triazole azides and bis-alkynes. One of these was alkylated to give a cyclic tetra-triazolium receptor, which complexes anions strongly in competitive DMSO-water mixtures. In 1?:?1 DMSO-water, the tetracationic receptor exhibits a preference for the larger halides, bromide and iodide, with all halides associating more strongly than the oxoanion, acetate. The sulfate dianion is complexed far more strongly than any of the monobasic anions (K(a) > 10(4) M(-1)). Quantum mechanics/molecular mechanics simulations corroborate the experimentally determined anion binding selectivity trends.     

An NMR study of optical isomers in solution

NMR ³¹P-{¹H} spectra of stereoisomeric N - [S - (methylethoxyphosphinyl) - thioglycolyl]valines in solution to reveal association of the molecules, and interaction of the chiral centres. Under fast inter-associate exchange in achiral media, these interactions lead to the following: (i) The chemical shift of the racemic mixture of enantiomers deviates from the shift of the individual species; (ii) the spectra of non-racemic mixtures are doublets; (iii) there are 2ⁿ lines in the spectrum of a mixture containing unequal concentrations of stereoisomers with n asymmetric centres. The integrated intensity ratio is equal to the concentration ratio in all cases. The concept of statistically controlled associate diastereomerism (SCAD) is introduced and the respective formalism is given to describe the spectral effects accompanying variations of temperature and concentration. It is also shown applicable to more complicated cases involving ion exchange of chiral fragments between stereoisomers.     

Anion binding with some 22- and 28-membered selenaaza macrocycles: Structural aspects and Se NMR studies

A series of macrocyclic adducts of the 22- and 28-membered selenaaza macrocycles (1 and 2, respectively) with different counter anions such as halides, sulfate, perchlorate, phosphate, trifluoroacetate and nitrate has been prepared. The adducts have been characterized by elemental analysis, IR, ¹H NMR, ⁷⁷Se NMR and ESI-MS analysis. The ⁷⁷Se NMR spectrum of the adduct (7) shows an upfield shift compared to the parent macrocycle. The bromo (5), iodo (6), sulfate (7), trifluroacetate (10) adducts of the 22-membered selenaaza macrocycle and perchlorate (16), trifluroacetate (18) adducts of the 28-membered selenaaza macrocycle have been structurally characterized. The crystal structures show extensive hydrogen bonding networks. The molecular structures of all the compounds show the macrocycle to be fully protonated except the trifluroacetate adduct of the 22-membered macrocycle (10), which is only diprotonated. The binding constants of the neutral 22-membered selenaaza macrocycle towards, fluoride, bromide, iodide and sulfate ion have been determined by the NMR titration method.     

Anion binding by metallo-receptors of 5,5'-dicarbamate-2,2'-bipyridine ligands

Three 5,5'-dicarbamate-2,2'-bipyridine ligands (L = L(1)-L(3)) bearing ethyl, isopropyl or tert-butyl terminals, respectively, on the carbamate substituents were synthesized. Reaction of the ligands L with the transition metal ions M = Fe(2+), Cu(2+), Zn(2+) or Ru(2+) gave the complexes ML(n)X(2)·xG (1-12, n = 1-3; X = Cl, NO(3), ClO(4), BF(4), PF(6), ?SO(4); G = Et(2)O, DMSO, CH(3)OH, H(2)O), of which [Fe(L(2))(3)???SO(4)]·8.5H(2)O (2), [Fe(L(1))(3)???(BF(4))(2)]·2CH(3)OH (7), [Fe(L(2))(3)???(Et(2)O)(2)](BF(4))(2)·2CH(3)OH (8), [ZnCl(2)(L(1))][ZnCl(2)(L(1))(DMSO)]·2DMSO (9), [Zn(L(1))(3)???(NO(3))(2)]·2H(2)O (10), [Zn(L(2))(3)???(ClO(4))(Et(2)O)]ClO(4)·Et(2)O·2CH(3)OH·1.5H(2)O (11), and [Cu(L(1))(2)(DMSO)](ClO(4))(2)·2DMSO (12) were elucidated by single-crystal X-ray crystallography. In the complexes ML(n)X(2)·xG the metal ion is coordinated by n = 1, 2 or 3 chelating bipyridine moieties (with other anionic or solvent ligands for n = 1 and 2) depending on the transition metal and reaction conditions. Interestingly, the carbamate functionalities are involved in hydrogen bonding with various guests (anions or solvents), especially in the tris(chelate) complexes which feature the well-organized C(3)-clefts for effective guest inclusion. Moreover, the anion binding behavior of the pre-organized tris(chelate) complexes was investigated in solution by fluorescence titration using the emissive [RuL(3)](2+) moiety as a probe. The results show that fluorescent recognition of anion in solution can be achieved by the Ru(II) complexes which exhibit good selectivities for SO(4)(2-).     

A study on solution deposited CuSCN thin films: Structural,electrochemical, optical properties

A cost-effective successive ionic layer adsorption and reaction (SILAR) method was used to deposit copper (I) thiocyanate (CuSCN) thin films on glass and steel substrates for this study. The deposited thin films were characterized for their structural, morphological, optical and electrochemical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectroscopy and VersaSTAT potentiostat. A direct band gap of 3.88 eV and 3.6 eV with film thickness of 0.7 μm and 0.9 μm was obtained at 20 and 30 deposition cycles respectively. The band gap, microstrain, dislocation density and crystal size were observed to be thickness dependent. The specific capacitance of the CuSCN thin film electrode at 20 mV/s was 760 F g⁻¹ for deposition 20 cycles and 729 F g⁻¹ for deposition 30 cycles.     

Anion binding properties of 5,5'-dicarboxamido-dipyrrolylmethanes

A series of 5,5'-dicarboxamido-dipyrrolylmethanes have been synthesized and in some cases crystallographically characterized. Proton NMR titrations have revealed that these compounds, that contain only four neutral hydrogen bond donors and are acyclic, selectively bind anions in very competitive solvent media such as DMSO-d6/water mixtures.     

Anion binding with a tripodal amine

Binding studies of the tren-based amine, L (N,N',N' '-tris(2-benzylaminoethyl)amine), with inorganic anions and two crystal structures, [H(3)L][H(2)PO(4)](3).H(3)PO(4) and [H(3)L][Br](3), are reported. NMR titration results indicate that the ligand binds H(2)PO(4)(-) and HSO(4)(-) more strongly than NO(3)(-) and halides. In the crystal structure of the phosphate complex, the ligand is triprotonated with the three arms pointing outward in a trigonal-planar-like arrangement. Four phosphate species are associated with the receptor, and have been assigned as three H(2)PO(4)(-) counterions located between each of the tren arms, and an additional H(3)PO(4) molecule above the quasi-planar tren. The structure of the bromide complex is slightly different, although again the tren receptor is triprotonated and quasi-planar, but in this case C(2v)-like symmetry is seen with two of the arms pointed in the same direction with a bromide ion in between. The other two bromides lie outside of the tren arms.     

Anion and cation binding by a pendant arm cyclam and its macrobicyclic derivatives

A series of transition-metal complexes of N,N',N',N'-tetra(3-hydroxypropyl)cyclam (L1) are reported. The X-ray structures of the compounds reveal pendant arm coordination of one of the alcohol groups to give square-pyramidal metal centres with simultaneous hydrogen bonding to the counter anions. Ligand L1 has been elaborated to form a series of macrotricyclic derivatives that form 1 ratio 1 complexes with Cu(II) and Ni(II). The X-ray structure of the tetrahydrate and protonated forms of L1 are also reported.     

Anion intercalation into highly oriented pyrolytic graphite studied by electrochemical atomic force microscopy

Knowledge of the dimensional changes occurring during electrochemical processes is fundamental for understanding of the electrochemical intercalation/insertion mechanism and for evaluation of potential application in electrochemical devices. We studied a highly oriented pyrolitic graphite (HOPG) electrode in perchloric acid, as a model to elucidate the mechanism of electrochemical anion intercalation in graphite. The aim of the work is the local and time dependent investigation of dimensional changes of the host material during electrochemical intercalation processes on the nanometer scale. We used atomic force microscopy (AFM), combined with cyclic voltammetry, as the in situ tool of analysis during intercalation and deintercalation of perchlorate anions. According to the AFM measurements, the HOPG interlayer spacing increases by 32% in agreement with the formation of stage IV of graphite intercalation compounds, when perchlorate anions intercalate. In addition, the local aspect of the process has been demonstrated by revealing coexisting regions with different kinetics for intercalation and deintercalation processes.     

Anion binding to monotopic and ditopic macrocyclic amides

[Structure: see text] Binding of fluoride anion as well as carboxylic acid tetraalkylammonium salts by macrocyclic compounds of different size was studied by NMR in DMSO-d6. It has been found that at least a 15-membered ring is necessary for successful recognition of fluoride. Larger macrocycles obtained in a [2+2] cyclization were shown to bind dicarboxylic acid salts. Effects of binding topicity are discussed.     

Competitive binding of cadmium by plant thiols: an electrochemical study assisted by multivariate curve resolution

Multivariate curve resolution with alternating least squares (MCR-ALS) has been applied to voltammetric data obtained from analysis of the competitive binding of cysteine (Cys) and cysteine–glycine (Cys-Gly) by Cd(II) as a first approach towards mixtures of phytochelatins and related compounds in natural media. From different starting points, the possibilities of formation of mixed complexes and/or displacements between ligands are investigated. Analysis of the resulting unitary voltammograms and concentration profiles of the resolved components by MCR-ALS suggests that the strongest ligand (Cys-Gly) is able to displace the weakest (Cys) from its metal complexes, whereas this does not happen in the opposite direction. On the other hand, no evidence of Cd mixed-ligand complexes was found. Figure Differential pulse polarograms measured in the independent titrations of 1 × 10^-5 mol L^-1 Cys, 1 × 10^-5 mol L^-1 Cys-Gly, and a mixture of Cys-Gly (0.5 × 10^-5 mol L^-1) and Cys (1 × 10^-5 mol L^-1) with Cd²⁺, at TRIS-HNO₃ buffer (0.1 mol L^-1 and PH 7.5) in the presence of 0.1 mol L^-1 KNO₃     

Molecular complexation and binding studied by electrophoretic NMR spectroscopy

Electrophoretic mobilities obtained on a molecularly selective manner by electrophoretic NMR can be used to provide a quantitative characterization of the composition and stoichiometry of molecular complexes. This is demonstrated in complexes formed by uncharged cyclodextrins which attain an electrophoretic mobility upon inclusion of charged surfactants.     

Chloride binding by a polyimidazolium macrocycle detected via fluorescence,NMR, and X-ray crystallography

Herein, we describe a macrocyclic polyimidazolium receptor that is preorganized for the binding of anionic guests, and particularly chloride. Additionally, diphenylimidazolium units were incorporated into this structure to enhance photophysical properties that were exploited for signal transduction of binding. In subsequent fluorescence binding studies, this receptor was found to bind a range of halides as well as phosphate with high affinity (K_a=1.8×10⁴, and 1.5×10⁴ for phosphate and chloride, respectively) in a competitive solvent mixture (1:1 water/acetonitrile). Results under these conditions were fitted to 1:1 binding curves, and indicated modest selectivity of the host for phosphate and chloride over other halides. Binding studies were also performed using ¹H NMR spectroscopy, during which the imidazolium C–H signal was observed to shift downfield upon titration with anions. These experiments were run in less polar solvent (1:9 water/acetonitrile), and could not be fitted to a 1:1 binding curve, suggesting higher order aggregates in this environment. Binding was further probed in the solid state by obtaining an X-ray crystal structure of receptor–iodide complex. In the resulting structure, two iodides were found to bind through interactions with two polyimidazolium hydrogens each. These results show that the described macrocycle is effective for anion-binding in competitive solvent, with modest selectivity for chloride over other halides, and that the nature of the binding interactions varies depending upon the solvent environment.     

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.