DFT, FT-Raman, and FT-IR investigations of 1-cyclopropylpiperazine

FT-IR and FT-Raman spectra of 1-cyclopropylpiperazine (1cppp) are experimentally examined in the range 4000-200 cm^?1. The optimized geometric parameters, conformational equilibria, normal mode frequencies and corresponding vibrational assignments of 1cppp C₇H₁₄N₂ are theoretically examined by means of B3LYP hybrid density functional theory (DFT) with the 6–31++G(d,p) basis set. Based on the potential energy distribution (PED) reliable vibrational assignments are made and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 1cppp are predicted. Calculations are performed for four different conformations in two point groups of 1cppp in the gas phase. A comparison between the experimental and theoretical results indicates that the B3LYP method is able to provide satisfactory results for the prediction of vibrational frequencies, structural parameters, and assignments. Furthermore, the C _s (equatorial-equatorial) point group is found as the most stable conformer of 1cppp.     

Vibrational spectra and reinvestigation of the crystal structure of a polymeric copper(II)-orotate complex, [Cu(μ-HOr)(H2O)2]n: The performance of new DFT methods, M06 and M05-2X, in theoretical studies

The crystal and molecular structure of a polymeric Cu(II)-orotate complex, [Cu(μ-HOr)(H₂O)₂]_n, has been reinvestigated by single crystal X-ray diffraction. It is shown that several synergistic interactions: two axial Cu-O interactions; intramolecular and intermolecular hydrogen bonds; and π-π stacking between the uracil rings contribute to the stability of the crystal structure. The Raman and FT-IR spectra of the title complex are reported for the first time. Comprehensive theoretical studies have been performed by using three unrestricted DFT methods: B3LYP; and the recently developed M06, and M05-2X density functionals. Clear-cut assignments of all the bands in the vibrational spectra have been made on the basis of the calculated potential energy distribution, PED. The very strong Raman band at 1219 cm⁻¹ is diagnostic for the N1-deprotonation of the uracil ring and formation of the copper-nitrogen bond, in this complex. The Cu-O (carboxylate) stretching vibration is observed at 287 cm⁻¹ in the IR spectrum, while the Cu-N (U ring) stretching vibration is assigned to the strong Raman band at 263 cm⁻¹. The molecular structure and vibrational spectra (frequencies and intensities) calculated by the M06 functional method are very similar to the results obtained by the B3LYP method, but M06 performs better than B3LYP in calculations of the geometrical parameters and vibrational frequencies of the interligand O-H?O hydrogen bonding. Unfortunately, the M05-2X method seriously overestimates the strength of interligand hydrogen bond.     

DFT, FT-Raman and FT-IR investigations of 5-methoxysalicylic acid

FT-IR and FT-Raman spectra of 5-methoxysalicylic acid (5MeOSA) have been experimentally reported in the region of 4000–10 cm⁻¹ and 4000–50 cm⁻¹, respectively. The optimized geometric parameters, conformational equilibria, normal mode frequencies and corresponding vibrational assignments of 5MeOSA (C₈H₈O₄) are theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31++G(d,p) basis set. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 5MeOSA have been predicted. Calculations are employed for different conformations of 5MeOSA, both in gas phase and in solution. Solvent effects are investigated using chloroform and dimethylsulfoxide. All results indicate that B3LYP method is able to provide satisfactory results for predicting vibrational frequencies and the structural parameters, vibrational frequencies and assignments, IR and Raman intensities of 5MeOSA are solvent dependent.     

Theoretical investigations on nonlinear optical and spectroscopic properties of 6-(3,3,4,4,4-pentafluoro-2-hydroxy-1-butenyl)-2,4-pyrimidinedione: An efficient NLO material

In this study, quantum chemical calculations of geometric parameters, conformational, natural bond orbital (NBO) and nonlinear optical (NLO) properties, vibrational frequencies, ¹H and ¹³C NMR chemical shifts of the title molecule [C₉H₇F₅N₂O₃] in the ground state have been calculated with the help of Density Functional Theory (DFT-B3LYP/6-311++G(d,p)) and Hartree-Fock (HF/6-311++G(d,p)) methods. The optimized geometric parameters, vibrational frequencies, ¹H and ¹³C NMR chemical shifts values are compared with experimental values of the investigated molecules. Comparison between experimental and theoretical results showed that B3LYP/6-311++G(d,p) method is able to provide more satisfactory results. In order to understand this phenomenon in the context of molecular orbital picture, we examined the molecular frontier orbital energies (HOMO, HOMO-1, LUMO, and LUMO + 1), the energy difference (ΔE) between E _HOMO and E _LUMO, electronegativity (χ), hardness (η), softness (S) calculated by HF/6-311++G(d,p) and B3LYP/6-311++G(d,p) levels. The molecular surfaces, Mulliken, NBO, and Atomic polar tensor (APT) charges of the investigated molecule have also been calculated by using the same methods.     

Spectroscopic characterization,X-ray structure and DFT studies on 4-[3-(2,5-dimethylphenyl)-3-methylcyclobutyl]-N-methylthiazol-2-amine

The titled molecule 4-[3-(2,5-dimethylphenyl)-3-methylcyclobutyl]-N-methylthiazol-2-amine (C₁₇H₂₂N₂S) is synthesized and characterized by ¹H NMR, ¹³C NMR, IR, and X-ray single crystal determination. The compound crystallizes in the monoclinic space group P2_1/c with a = 6.3972(4) Å, b = 9.4988(6) Å, c = 26.016(2) Å and β = 93.496(7)°. In addition to the molecular geometry from the X-ray determination, vibrational frequencies and gauge, including the atomic orbital (GIAO), ¹H and ¹³C NMR chemical shift values of the titled compound in the ground state are calculated using the density functional (B3LYP) method with 6-31G(d), 6-31++G(d,p) and 6-311+G(2d,p) basis sets. The calculated results show that the optimized geometries can well reproduce the crystal structure. Moreover, the theoretical vibrational frequencies and chemical shift values show good agreement with the experimental values. The predicted nonlinear optical properties of the titled compound are greater than those of urea. DFT calculations of the molecular electrostatic potentials and frontier molecular orbitals of the titled compound are carried out at the B3LYP/6-31G(d) level of theory.     

HF and DFT studies and vibrational spectra of 1,2-bis(2-pyridyl)ethylene and its zinc (II) halide complexes

Ab initio restricted Hartree–Fock and density function theory calculations using BLYP, B3LYP and B3PW91 functionals were carried out to study molecular structure and vibrational spectrum of 1,2-bis(2-pyridyl)ethylene (which is abbreviated as bpe). Comparison of calculated and experimental results indicates the density functional B3LYP and BLYP/6-311G* methods are more accurate in predicting fundamental vibrational frequencies than the scaled other approaches. On the basis of calculated results, assignment of fundamental vibrational modes of bpe was proposed. Complexes of the type Zn(bpe)X₂ [where X = Cl, Br, I] have been studied in the 4000–400 cm⁻¹ region, and assignments of all the observed bands were made. The analysis of the infrared spectra indicates that there is some structure-spectra correlations.     

Electronic absorption,vibrational spectra,non-linear optical properties,NBO analysis and thermodynamic properties of 9-[(2-hydroxyethoxy) methyl] guanine molecule by density functional method

The Fourier transform infrared (FT-IR) and FT-Raman of 9-[(2-hydroxyethoxy) methyl] guanine (9-2HEMG) have been recorded in the regions 4000–100 and 4000–400 cm⁻¹, respectively. A complete assignment and analysis of the fundamental vibrational modes of the molecule were carried out. The observed fundamental modes have been compared with the harmonic vibrational frequencies computed using DFT (B3LYP) method by employing 6-31G(d,p) and 3-21G basis sets. The vibrational studies were interpreted in terms of potential energy distribution. The first order hyperpolarizability (β₀) and related properties (α, μ and Δα) of this molecular system are calculated using B3LYP/6-31G(d,p) method based on the finite-field approach. Stability of the molecule arising from hyperconjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The results show that electron density (ED) in the σ* and π* antibonding orbitals and second-order delocalization energies (E(²⁾) confirm the occurrence of intramolecular charge transfer (ICT) within the molecule. UV–vis spectrum of the compound has been recorded and electronic properties such as excitation energies, oscillator strength and wavelength are calculated by TD-DFT and CIS methods using B3LYP/6-31G (d,p) basis set. Molecular electrostatic potential (MEP) and HOMO–LUMO energy levels are also constructed. The thermodynamic properties of the title compound have been calculated at different temperatures and the results reveal that the standard heat capacities (C_p,m), standard entropies (S_m) and standard enthalpy changes (H_m) increase with rise in temperature.     

A theoretical study on 1-(thiophen-2-yl-methyl)-2-(thiophen-2-yl)-1H-benzimidazole

The molecular geometry and vibrational frequencies of 1-(thiophen-2-yl-methyl)-2-(thiophen-2-yl)-1H-benzimidazole (C(16)H(12)N(2)S(2)) in the ground state has been calculated using the Hartree-Fock (HF) and density functional method (B3LYP) with 6-31G(d) basis set. The optimized geometric bond lengths and bond angles obtained by using HF and DFT (B3LYP) show the best agreement with the experimental data. Comparison of the observed fundamental vibrational frequencies of 1-(thiophen-2-yl-methyl)-2-(thiophen-2-yl)-1H-benzimidazole (C(16)H(12)N(2)S(2)) and calculated results by density functional B3LYP and Hartree-Fock methods indicate that B3LYP is superior to the scaled Hartree-Fock approach for molecular vibrational problems.     

FT-IR, FT-Raman vibrational spectra and molecular structure investigation of 2-chloro-4-methylaniline: A combined experimental and theoretical study

In this work, the experimental and theoretical vibrational spectra of 2-chloro-4-methylaniline (2Cl4MA, C₇H₈NCl) were studied. FT-IR and FT-Raman spectra of 2Cl4MA in the liquid phase have been recorded in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree-Fock (HF) and density functional method (B3LYP) with the 6-31G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p) and 6-311G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p) basis sets. The vibrational frequencies have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The DFT-B3LYP/6-311++G(d,p) calculations have been found more reliable than the ab initio HF/6-311++G(d,p) calculations for the vibrational study of 2Cl4MA. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of aniline and p-methylaniline molecules.     

On the structural and spectroscopic properties of the thienyl chalcone derivative: 3-(5-Bromo-2-thienyl)-1-(4-nitrophenyl)-prop-2-en-1-one

In this study, we investigate the structural and spectroscopic properties of the thienyl chalcone derivative 3-(5-Bromo-2-thienyl)-1-(4-nitrophenyl)-prop-2-en-1-one, C₁₃H₈BrNO₃S, using nuclear magnetic resonance (¹H and ¹³C NMR), UV–vis and Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy at room conditions combined with density functional theory (DFT) and time-dependent DFT (TD-DFT) augmented with B3LYP/6-311G(d,p) and CAM-B3LYP/6-311G(d,p) basis sets, yielding valuable information on the molecular conformational preferences, vibrational assignments, optical properties and electronic transitions. The vibrational mode assignments of the most stable conformer of C₁₃H₈BrNO₃S are discussed based on potential energy distribution (PED) analysis and establishing a comparison with a similar chemical structure. The temperature dependence on the Raman spectra of the C₁₃H₈BrNO₃S shows a reversible phase transition in the range 443–443 K pointed out by the discontinuity in the dω/dT of bands in the external and internal modes region. The UV–vis spectrum of the C₁₃H₈BrNO₃S indicates a semiconductor behavior with an optical band gap of 2.6 eV, corresponding to the predicted value of 3.42 eV assigned as the electronic transition from the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO). TD-DFT calculations reveal that the electron donor and acceptor group substitution on the 1-phenyl-3-(thiophen-2-yl)prop-2-en-1-one affects its absorption and nonlinear activity.     

DFT Study of the Molecular Structure,Conformational Preference,HOMO, LUMO,and Vibrational Analysis of 2-, and 3-Furoyl Chloride

Molecular structure, conformational stability and vibrational wave numbers for the rotational isomers of 2-furoyl chloride and 3-furoyl chloride have been computed using the B3LYP method with the 6-311++G(d,p) basis set. From computations, 2-furoyl chloride was predicated to exist predominantly in cis conformation with cis–trans rotational barrier 40.40 kJ·mol^?1, and 3-furoyl chloride was predicated to exist predominantly in the trans conformation with cis–trans rotational barrier 30.17 kJ·mol^?1. The effects of solvents on the conformational stability of all the molecules in nine different solvents (heptane, chloroform, tetrahydrofuran, dichloroethane, acetone, ethanol, methanol, dimethylsulfoxide and water) were investigated. The integral equation formalism of the polarizable continuum model was used for all solution phase computations. The vibrational wave numbers and the corresponding vibrational assignments of the molecules in C₁ symmetry were examined and the simulated infrared spectra of the molecules are reported. The geometrical parameters, highest occupied and lowest unoccupied molecular orbitals, Infrared intensities, and molecular electrostatic potentials results are reported.     

Synthesis, spectroscopic and DFT investigation of dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate

Dimethyl-2-(5-acetyl-2,2-dimethyl-4,6-dioxo-1,3-dioxan-5-yl)-3-(triphenylphosphinylidene)succinate has been synthesized and characterized by elemental analysis, FT-IR and ¹H, ¹³C and ³¹P NMR. The vibrational wavenumbers, gauge including atomic orbital (GIAO) ¹H and ¹³C chemical shift values of title compound in the ground state have been computed with density functional theory method (DFT) and the B3LYP functional. The basis sets used are 6-311G(d,p) and 6-31G(d). The harmonic vibrational wavenumbers have been computed and the scaled values have been compared with the experimental FT-IR spectra. The complete assignments have been performed on basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Most of the computed wavenumbers are found to be in good agreement with the observed spectrum.     

Molecular structure and vibrational assignment of melaminium phthalate by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignment of melaminium phthalate (C₃H₇N₆⁺·C₈H₅O₄⁻) in the ground state were performed by HF and B3LYP levels of theory using the 6-31G(d) basis set. The optimized bond length numbers with bond angles are in good agreement with the X-ray data. The vibrational spectra of melaminium phthalate which is calculated by HF and B3LYP methods, reproduces vibrational wave numbers with an accuracy which allows reliable vibrational assignments. The title compound has been studied in the 4000–100 cm⁻¹ region where the theoretical evaluation and assignment of all observed bands were made.     

Preparation,molecular definition,spectroscopic characterization and density functional theory calculations on N’-(4-(3-methyl-3-phenylcyclobutyl)-3-phenylthiazol-2(3H)-ylidene)benzenesulfonohydrazide

Abstract

A new sulfonyl derivative (C₂₆H₂₅N₃O₂S₂), N’-(4-(3-methyl-3-phenylcyclobutyl)?3-phenylthiazol-2(3H)-ylidene)benzenesulfonohydrazide, was prepared from a mixture of benzenesulfonylhydrazide and phenylisothiocyanate in ethanol. The 3?D crystal structure, unit-cell dimensions, space group and crystal system of compound were investigated by single-crystal X-ray diffraction (SCXRD). FT-IR spectrum in solid state was observed in the region 4000–400?cm^?1 and the ¹H and ¹³C NMR spectra were recorded in CDCl₃ solution. In order to support the experimental results, the molecular geometry, vibrational frequencies, ¹H and ¹³C chemical shifts in the ground state have been calculated by using the density functional method (DFT/B3LYP) together with 6-311?G+(d, p) basis set. A good linear correlation between experimental and theoretically predicted structural and spectral parameters was observed (R²～0.9).     

Ab initio- and density-functional studies of conformational behaviour of N-formylmethionine in gaseous phase

The current work is a study of the conformational space of the non-ionic N-formylmethionine molecule around its seven structurally significant internal backbone torsional angles at B3LYP/6-31++G(d,p) levels of theory in the gaseous phase. The potential energy surface exploration reveals that a total of 432 different conformers would result if all the possible combinations of the internal rotations were to be considered. A set of twelve conformers of the N-formylmethionine molecule are then further analysed in terms of their relative stabilities, theoretically predicted harmonic vibrational frequencies, HOMO-LUMO energy gaps, ESP charges, rotational constants and dipole moments calculated using MP2/6-31++G(d,p) and B3LYP/6-311++G(d,p) levels. The calculated relative energy-range of the conformers at the MP2 level is 11.08 kcal mol^?1 (1 kcal = 4.1868 kJ), whereas the same obtained at the B3LYP level is 10.02 kcal mol^?1. The results of this study provide a good account of the role of four types of intramolecular H-bonds, namely O…H—O, O…H—N, O…H—C and N…H—C, in influencing the energies of the conformers as well as their conformational and vibrational spectroscopic aspects. The relative stability order of the conformers appears to depend on the level of theory used while the vibrational frequencies calculated at the B3LYP level are in better agreement with the experimental values.     

FTIR and FTRaman spectra,assignments, ab initio HF and DFT analysis of 4-nitrotoluene

In this work, the experimental and theoretical study on molecular structure and vibrational spectra of 4-nitrotoluene are studied. The FTIR and FTRaman experimental spectra of the molecule have been recorded in the range of 4000–100 cm^?1. Making use of the recorded data, the complete vibrational assignments are made and analysis of the observed fundamental bands of molecule is carried out. The experimental determinations of vibrational frequencies are compared with those obtained theoretically from ab initio HF and DFT quantum mechanical calculations using HF/6-31G (d, p), B3LYP/6-31++G* (d, p) and B3LYP/6-311++G* (d, p) methods. The differences between the observed and scaled wave number values of most of the fundamentals are very small in B3LYP than HF. The geometries and normal modes of vibrations obtained from ab initio HF and B3LYP calculations are in good agreement with the experimentally observed data. Comparison of the simulated spectra provides important information about the ability of the computational method (B3LYP) to describe the vibrational modes. The vibrations of NO₂ and CH₃ groups coupled with skeletal vibrations are also investigated.     

Spectral analysis of acetylcholine halides by density functional theory calculations

The optimized molecular structures, vibrational frequencies and ¹H and ¹³C NMR chemical shifts of acetylcholine halides (F, Cl, and Br) have been investigated using density functional theory (B3LYP) method with 6-311G(d) basis set. The comparison of their experimental and calculated IR, R and NMR spectra of the compounds has indicated that the spectra of three optimized minimum energy conformers can simultaneously exist in one experimental spectrum. Thus, it was concluded that the compounds simultaneously exist in three conformations in the ground state. The calculated optimized geometric parameters (bond lengths and bond angles), vibrational frequencies and NMR chemical shifts for the minimum energy conformers were seen to be in a good agreement with the corresponding experimental data. All the assignments of the theoretical frequencies were performed by potential energy distributions using VEDA 4 program.     

FT-IR, FT-Raman, ab initio and DFT structural, vibrational frequency and HOMO-LUMO analysis of 1-naphthaleneacetic acid methyl ester

In this work, the FT-IR and FT-Raman spectra of 1-naphthaleneacetic acid methyl ester (abbreviated as 1-NAAME, C₁₀H₇CH₂CO₂CH₃) have been recorded in the region 3600–10 cm⁻¹. The optimum molecular geometry, normal mode wavenumbers, infrared and Raman intensities, Raman scattering activities, corresponding vibrational assignments, Mullikan atomic charges and other thermo-dynamical parameters were investigated with the help of HF and B3LYP (DFT) method using 6-31G(d,p), 6-311G(d,p) basis sets. Reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. From the calculations, the molecules are predicted to exist predominantly as the C1 conformer. The correlation equations between heat capacity, entropy, enthalpy changes and temperatures were fitted by quadratic formulae. Lower value in the HOMO and LUMO energy gap explains the eventual charge transfer interactions taking place within the molecule. UV–VIS spectral analyses of 1NAAME have been researched by theoretical calculations. In order to understand electronic transitions of the compound, TD-DFT calculations on electronic absorption spectra in gas phase and solvent (DMSO and chloroform) were performed. The calculated frontier orbital energies, absorption wavelengths (λ), oscillator strengths (f) and excitation energies (E) for gas phase and solvent (DMSO and chloroform) are also illustrated.     

DFT, FT-Raman and FT-IR investigations of 5-o-tolyl-2-pentene

FT-IR and Raman spectra of 5-o-tolyl-2-pentene (OTP) have been experimentally reported in the region of 4000-10 cm(-1) and 4000-100 cm(-1), respectively. The optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of cis and trans isomers of OTP (C12H16) have been theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31G(d) and 6-31++G(d,p) basis sets. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated. Comparison between the experimental and theoretical results indicates that density functional B3LYP method is able to provide satisfactory results for predicting vibrational wavenumbers and trans isomer is supposed to be the most stable form of OTP molecule.