Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

Influence of molecular weight on the phase behaviors of comb‐like polymers with long n‐alkyl side chains based on mesogen‐jacketed liquid crystalline polymers

A series of comb‐like polymers, poly{2,5‐bis[(4‐octadecyloxyphenyl)oxycarbonyl]‐styrenes{ (P‐OC18s) with different molecular weights (M_n) and low molecular weight distributions have been successfully synthesized via atom transfer radical polymerization. The phase behaviors have been investigated by a combination of techniques including differential scanning calorimetry, polarized optical microscopy, wide‐angle X‐ray diffraction, and temperature‐variable FTIR spectroscopy. One hand, phase behaviors of the alkyl tails were strongly influenced by the mesogens of polymers, leading to the poor packing of the alkyl tails and the low melting. The other hand, the liquid crystalline phase structures of polymers were found to be strongly M_n dependent. The samples with M_n ≤ 4.6 × 10⁴ formed a smectic phase in low temperature and an isotropic phase in high temperature. The samples with M_n ≥ 5.2 × 10⁴ displayed a reentrant isotropic phase, which was separating the smectic phase and columnar nematic phase. Meantime, the experiment results showed that the glass temperature and the transition temperature from smectic phase to isotropic phase both slightly increased with the increase of M_nS; however, the transition temperature from isotropic phase to columnar phase sharply decreased with the M_nS improved. The reappearance of isotropic phase is due to the competing between the driving force of the enthalpy and the driving force of the entropy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,structure and properties of new chiral liquid crystalline monomers and homopolysiloxanes containing menthyl groups

The synthesis is described of four new chiral liquid crystalline monomers (M₂–M₅ ) and their corresponding side‐chain homopolysiloxanes (P₂–P₅ ) containing menthyl groups. Chemical structures were characterised using FT‐IR or ¹H NMR spectra, and specific optical rotations were evaluated with a polarimeter. The phase behaviour and mesomorphic properties of the new compounds were investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy, UV/visible/NIR spectrocopy and X‐ray diffraction. The monomers and homopolymers with more aryl segments showed noticeably lower specific optical rotation value. The monomers M₂–M₅ formed a cholesteric or blue phase when a flexible spacer was inserted between the rigid mesogenic core and the terminal menthyl groups by reducing the steric effect. M₂–M₅ revealed enantiotropic cholesteric phase. Moreover, M₂ also exhibited a monotropic smectic A (SmA) phase, and M₄ also exhibited a cubic blue phase on cooling. The selective reflection of light shifted to the long wavelength region with increasing rigidity of the mesogenic core for M₂–M₅ . P₂–P₅ exhibited SmA phases, and the mesogenic moieties were ordered in smectic orientation with their centres of gravity in planes. Melting or glass transition temperature and the clearing temperature increased, and the mesophase temperature range widened with increasing rigidity of the mesogenic core.     

Synthesis, structure and mesomorphic properties of side-chain chiral liquid crystalline polysiloxanes based on (S)-(+)-2-methyl-1-butanol derivatives

The synthesis of five chiral liquid crystalline monomers (M₁-M₅), and their corresponding side-chain polymers (P₁-P₅) based on (S)-(+)-2-methyl-1-butanol derivatives is described. The chemical structures of the monomers were confirmed by FT-IR, ¹H NMR, and elemental analyses. The structure-property relationships of the monomers and polymers obtained are discussed. The mesomorphic properties were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. All monomers showed a cholesteric phase. For M₂, M₃, and M₅, besides a cholesteric phase and a smectic A (S_A) phase, M₂ also revealed an enantiotropic chiral smectic C phase and a monotropic smectic B (S_B) phase, and M₃ also showed a S_B phase. The polymers P₁-P₅ exhibited a S_A phase, moreover, P₂, P₃ and P₅ also revealed a phase. The experimental results demonstrated that a flexible siloxane backbone and a long flexible spacer tended to exhibit a low glass transition temperature, high thermal stability, and wide mesophase temperature range.     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermotropic liquid crystalline polymers. I. Cholesterol-containing polymers and copolymers

An approach to the creation of thermotropic cholesterol-containing liquid crystalline polymers by the chemical binding of cholesterol molecules with side chains of comblike polymers is presented. This type of structure permits a decrease in the steric hindrances provided by the backbone chains for the purpose of realizing the liquid crystalline state. A number of new cholesteric esters of poly(N-methacryloyl-ω-aminocarbonic acid)s (PChMAA-n) with different side-chain lengths (n = 2–11) as well as a series of copolymers of ChMA-n with n-alkylacrylates and n-alkylmethacrylates have been synthesized. The experimental evidence of liquid crystalline structure formation in these polymers in glass, viscoelastic, and fluid states is discussed. Molecular and supermolecular structures of cholesterol-containing comblike polymers have been studied and the model of macromolecular packing in the liquid crystalline state is proposed. It is shown that the existence of a layered order of side methylene groups together with ordering of cholesterol groups is necessary to the production of the liquid crystalline state in these polymers.     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Molecular design and synthesis of novel side-chain liquid crystalline polymers

Novel side-chain liquid crystalline polymers were synthesized based on the molecular design of the chemical structures of main-chain, spacer, and mesogenic groups. The main-chain structures are polyether, by the cationic ring-opening polymerization of oxetane derivatives, and polydiene, by the radical polymerization of diene derivatives. Some of the polymers from oxetanes with various mesogen and spacer groups show smectic liquid crystalline phase. Both cyano- and fluorine-substituted biphenyls are good mesogenic groups in these liquid crystalline polymers. Polydiene also acts as a novel main-chain to give smectic liquid crystalline state with cyanobiphenyl or fluorobiphenyl as a mesogen. Not only oligomethylene groups but also siloxane and oligo(oxyethylene) groups act as a component of the spacer groups to give liquid crystalline state.     

Synthesis of novel multi-arm star azobenzene side-chain liquid crystalline copolymers with a hyperbranched core

A series of novel multi-arm star side-chain liquid crystalline (LC) copolymers with hyperbranched core moieties were synthesized by atom transfer radical polymerization (ATRP) using a multi-functional hyperbranched polyether as the initiator and chlorobenzene as the solvent. The multi-functional hyperbranched polyether initiator was prepared from poly(3-ethyl-3-(hydroxymethyl)oxetane) (PEHO) and 2-bromo-2-methylpropionyl bromide. The azobenzene side-chain liquid crystalline arms were designed to have an LC conformation of poly[6-(4-methoxy-4^′-oxy-azobenzene)hexyl methacrylate] with different molecular weights. Their characterization was performed with ¹H NMR, size exclusion chromatograph (SEC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The multi-arm star side-chain liquid crystalline copolymers exhibited a smectic and a nematic phase, and the phase transition temperatures from the smectic to the nematic phase and from the nematic to isotropic phase increased with increasing the molecular weight of the multi-arm star side-chain liquid crystalline copolymers from 1.78 × 10⁴ to 9.07 × 10⁴.     

Frustrated molecular packing in highly ordered smectic phase of side-chain liquid crystalline polymer with rigid polyacetylene backbone

Using poly(5-{[(4'-heptoxy-4-biphenylyl)carbonyl]oxy}-1-pentyne) as an example, we demonstrate the incorporative accommodation of the rigid polyacetylene backbones and the mesogenic pendants, which leads to a highly ordered smectic (Sm) phase with a frustrated structure. The polymer exhibits a recognizable sheetlike molecular shape due to its rigid backbone and relatively short spacer (three methylene units), and the building block of the liquid crystalline (LC) phase is the whole molecule. In the LC phase, five layers of the molecules stack as a smectic A (SmA) block, and adjacent SmA blocks glide halfway of the molecular width from one to another. In scanning tunneling microscopy (STM) experiments, the STM tip scrape is found to generate a regular nanopattern with periodic electron conductivity, of which the spacing is determined by the side-chain length.     

Chiral side-chain liquid crystalline polysiloxanes bearing fluorinated mesogens and cholesteryl groups

A series of chiral side-chain liquid crystalline (LC) polysiloxanes bearing fluorinated mesogens were synthesized with a cholesteric LC monomer and a fluorinated nematic LC monomer. They were characterized by use of various experimental techniques, and effect of fluorinated mesogens on characteristic of LC polysiloxanes was studied as well. In photoluminescence spectra, a narrow and a broad peak occur at around 270-317 nm, originated, respectively, from fluorinated phenyl groups and the conjugated xenene structure. The specific rotation analysis of all polymers showed negative values, but absolute values were lower than those of the chiral monomers. All polymers showed smectic LC phase with very wide temperature ranges on heating and cooling cycles. Especially, only polymers bearing more fluorinated component exhibited smectic-cholesteric phase transition when they were heated. As the polymers contained more fluorinated mesogens, segregation of the fluorinated segment to the surface should occur at mesomorphic temperature. The highly ordered lamellar mesogen-siloxane matrix systems should be disturbed severely by separation of fluorinated mesogens, suggesting mesogenic orders transition from lamellar smectic to cholesteric phase.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Photocrosslinkable liquid‐crystalline block copolymers with coumarin units synthesized with atom transfer radical polymerization

A new class of liquid‐crystalline (LC) homopolymers of poly{11‐[4‐(3‐ethoxycarbonyl‐coumarin‐7‐oxy)‐carbonylphenyloxy]‐undecyl methacrylate} containing a coumarin moiety as a photocrosslinkable unit with various polymerization degrees and their LC‐coil diblock and LC‐coil‐LC triblock copolymers with polystyrene as the coil segment was synthesized with the atom transfer radical polymerization method. All the homopolymers and block copolymers synthesized here exhibited narrow polydispersities, indicating well‐controlled living polymerization. Differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction confirmed that all the homopolymers and block copolymers exhibit a monolayer smectic A phase. Coumarin moieties in the polymers can be photodimerized under λ > 300 nm light irradiation to yield crosslinked network structures, which improve the thermal stability of a polymer nanostructure because of microphase separation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2197–2206, 2003     

Advances in liquid crystalline conjugated polymers

We review advances in liquid crystalline (LC) conjugated polymers by focusing on (i) ferroelectric and (ii) photoresponsive LC conjugated polymers. In Part 1, LC polyphenylene derivatives were synthesized through substitution of fluorine‐containing chiral LC groups into side chains. Poly(para‐phenylene) [ P1 ] and poly(meta‐phenylene) [ P2 ] derivatives showed chiral smectic C phases responsible for ferroelectricity. They exhibited quick response to electric field, giving switching times of <1 s between two bistable states. The spontaneous polarization (P_S) of P2 remained unchanged even after the electric field became zero, affording the residual polarization (P_R) whose value was the same as that of P_S. This indicates that P2 has a potential memory function based on FLC nature. In Part 2, poly(para‐phenylenevinylene) [ P5 ] and poly(bithienylene‐phenylene) [ P6 ] derivatives were synthesized by introducing dithienylethene moieties into side chains. Drastic quenching of fluorescence occurred when the photoresponsive moiety changed from an open form to a closed one upon an irradiation of ultraviolet light. The quenched fluorescence was recovered through a photoisomerization from the closed form to the open one. Macroscopically aligned P6 film exhibited a linearly polarized fluorescence with significant anisotropy. Reversible quenching and emitting behavior in anisotropic fluorescence was controlled by the photochemical switching. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2463–2485, 2009     

Linear and A2+B3‐type hyperbranched polyesters comprising phenylbenzothiazole unit: Preparation,liquid crystalline,and optical properties

Novel liquid crystalline (LC) hyperbranched (HB) polyesters comprising phenylbenzothiazole (PBT) unit as mesogen in the interiors were prepared at various feed mole ratios (A₂/B₃) by solution polycondensation of a dioxydiundecanol derivative of PBT (A₂ monomer) with trimesic acid trimethyl ester (B₃ monomer) via A₂+B₃ approach and their LC and optical properties were investigated. Analogous linear polyesters containing the PBT unit in the main chains were also prepared by the solution polycondensation of A₂ monomer with aromatic or aliphatic dimethyl esters. FTIR and ¹H‐NMR spectroscopies indicated that the HB polyesters are produced without gelation during the polycondensation and have degree of branching (DB) of 7–46%. The structures of HB polymers changed depending on the feed mole ratios and the polymer prepared in the mole ratio of A₂/B₃ = 3/2 had the highest inherent viscosity and DB. Acetylation of terminal OH group‐having HB polyesters prepared in excess mole ratios of A₂/B₃ afforded ones bearing acetoxy groups in the terminals. DSC measurements, polarizing microscope observations of textures, and X‐ray analyses suggested that only the terminal OH group‐having HB polymer prepared in the mole ratio of A₂/B₃ = 3/1 form smectic C phase. In the linear polymers, the polymers derived by using the aromatic dimethyl esters had no LC melt, but those from the aliphatic dimethyl esters formed LC smectic C phase. The acetoxy group‐bearing HB polymers showed more stable smectic A or C phase than those with the OH terminals. Solution UV‐vis and photoluminescent (PL) spectra indicated that the linear and the HB polymers have analogous optical properties and display maximum absorbances and blue‐light emission on the basis of the PBT unit, where the Stokes shifts were observed because of intermolecular aggregation effects, but there is a large difference between the optical behaviors of the linear and the HB polymers in film, whose E_g values of the linear polymers decreased and those of the HB polymers vice versa. Quantum efficiencies (Φ) had a tendency of increase in the linear polymers and the HB polymers forming LC phases. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6688–6702, 2008     

Synthesis and characterization of side chain liquid crystalline polymers exhibiting cholesteric and blue phases

A series of cyclosiloxane-based cholesteric liquid crystalline (LC) polymers were synthesized from a cholesteric LC monomer cholest-5-en-3-yl(3β) 4-(2-propenyloxy)benzoate and a nematic LC monomer butyl 4-[4-(2-propenyloxy)benzoxy]benzoate. All the polymers exhibit thermotropic LC properties and show cholesteric phases. Most of the polymers display four types of phase transition behaviour corresponding to glass transition, melting point, cholesteric phase-blue phase transition and clearing point. The mesophase temperature range of the blue phases are as broad as 20°C. The blue phase was confirmed by the apperance of planar textures and cubic packings. With an increase of non-chiral component in the polymers, the clearing point decreases slightly, while the glass transition and melting temperatures change little. In the reflection spectra of the polymer series the reflected wavelength broadens and shifts to longer wavelength with increase of the non-chiral component in the polymer systems, suggesting that the helical pitch P lengthens.     

Electro‐optical behavior of ferroelectric liquid crystalline polyphenylene derivatives

Liquid crystalline (LC) polyphenylene derivatives, such as poly(para‐phenylene) (PPP), poly(meta‐phenylene) (PMP), poly(meta‐biphenylene) (PBP), and poly (meta‐terphenylene) (PTP) derivatives, were synthesized through substitution of fluorine‐containing chiral LC groups into side chains, with an aim to develop ferroelectric LC (FLC) conjugated polymers. All the polymers, except PTP, showed enantiotropic liquid crystallinities, where several types of mesophases were observed in both heating and cooling processes. Among them, PPP and PMP derivatives showed chiral smectic C (S_C*) phases responsible for ferroelectricity. In fact, they exhibited quick response to electric field, in spite of high viscosities inherent to polymers, giving rise to switching times of less than 1 s between two S_C states with reversely directed alignment. Hysteresis loops between the polarization and electric field were also observed for PPP and PMP. The spontaneous polarization (P_S) of PMP remained unchanged even after the electric field became zero, affording the residual polarization (P_R) whose value was the same as that of P_S. This indicates that PMP has a prospective memory function based on FLC nature. The present study is the first report for realizing a quick switching in macroscopic alignment using electric field and also for generating a potential memory function in π‐conjugated polymers. It is elucidated that unusual polymer main chains such as polyphenylenes can be used to prepare new ferroelectric polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3591–3610, 2008     

Studies on thermotropic liquid crystalline polymers. XIV. Synthesis and properties of liquid crystalline poly(imide-ester)s by the direct polycondensation

A series of semi-aromatic poly(imide-ester)s were prepared by the direct polycondensation of N-(4-carboxyphenyl) trimellitimide or N-(3-carboxyphenyl) trimellitimide with various pyromellitic diimide diols containing methylene spacer = 2–6, respectively. The effect of the amount of LiCl, pyridine, and the kinds of condensation agents on the direct polycondensation were studied. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscopic observation, and thermogravimetric analysis (TGA). It is found that P1 series [derived from N-(4-carboxyphenyl) trimellitimide] with even number methylene spacer (n = 4, 6) exhibit smectic mesophase, but P2 series [derived from N-(3-carboxyphenyl) trimellitimide] do not show LC phase. © 1996 John Wiley & Sons, Inc.