The effect of position of octadecyloxy tail on the formation of liquid crystal with chalconyl-ester and chalconyl-vinyl ester series: Comparison with corresponding linkage group

Understanding of the electronic structures is indispensable for complete elucidation of the charge carrier behaviors in organic semiconductors. Although recent progress enabling accurate photoemission demonstrations of organic single crystals has greatly promoted such understanding, it had been achieved merely on partially oxidized surfaces by exposure to ambient conditions. In this study, we successfully prepared an oxide-free surface of the pentacene single crystal (PnSC) by cleavage in vacuum. X-ray and ultraviolet photoelectron spectroscopy measurements on the PnSC clean surface revealed improved energetic homogeneity of the C1s level and highest-occupied state in comparison to those of the partially oxidized surface.     

Alkyloxy azo-cinnamate ester based thermotropic liquid crystals and their photophysical investigations

Two series of rod shaped Schiff base containing azo-cinnamate thermotropic liquid crystalline compounds were synthesized and characterized. These molecules have four different alkyl spacers (n = 6, 8, 10, and 12) at one end and a dodecyloxy chain at another end (n = 12) which influence their liquid crystalline properties. Liquid crystallinity commence from six methylene spacer onwards in the series exhibiting with Nematic to Smectic-C mesophases. Analytical data confirm the molecular structures of homologues series of compounds. The characteristic texture of liquid crystalline phases obtained using polarizing‐light microscope with a heating stage. The structural transformation of these liquid crystals was confirmed by differential scanning calorimetry. All the compounds exhibited various calamitic mesophases with wide mesomorphic temperature ranges. The relationship between structure and mesomorphic properties was discussed in framework of geometrical configuration of central unit, linking part, and length of alkoxy chains. Photosensitive azobenzene group undergoes photoisomerization under UV light and monitored by UV-Visible spectroscopy.     

Mesomorphism dependence on central bridge and tail ended polar group

Abstract

Severe operation conditions in the agriculture industry and numerous influencing factors complicate the selection of a contact material for switching devices. Attempts have been made to change the Ag-CdO contact material to a less toxic one. Environmentally friendly copper-base contact materials have been created for devices, which operate in agricultural electric systems, meanwhile being low-cost and with pre-set level of reliability in terms of transient resistance.     

Synthesis and mesomorphic properties of novel high birefringence azobenzene liquid crystals with lateral fluorosubstituent

In order to obtain liquid crystals with high birefringence (Δn), four azobenzene compounds based on lateral fluorinated bistolane moieties with trifluoromethyl terminal groups were synthesized with Hagihara–Sonogashira cross-coupling reaction. The molecular structures of the compounds were confirmed by Fourier transform infrared, ¹H-nuclear magnetic resonance. The transition temperatures, optical textures, and optical anisotropies were determined by differential scanning calorimetry, polarizing optical microscopy. The effect of the alkyl substituents on liquid crystal behavior is discussed in detail. The compounds have showed higher birefringence values.     

Study of Molecular Structure,Mesomorphism and Their Relation with Molecular Rigidity-Flexibility

Entirely smectogenic novel chalconyl homologue derivatives of thermotropic liquid crystals (LC) have been synthesized with a view to understanding and establishing the effects of molecular structure on liquid crystal properties and the degree of liquid crystallinity. The homologous series consists of 12 (C₁ to C₁₆) homologues with absence of nematogenic character throughout the present series. The textures of smectic phase are fan shaped or batonnet type of smectic-A or of smectic-C. Phase transition temperatures and thermotropic data were determined by an optical polarizing microscope equipped with a heating stage. The smectic–isotropic (Sm-I) phase transition curve and the Cr-Sm transition curve behave in normal manner in the phase diagram. Analytical and spectral data confirm molecular structures of novel homologues. The average thermal stability for smectic is 139.42°C and the mesogenic phase length ranges from 3.5°C to 79.6°C. Mesogenic properties are compared with the structurally similar known series.     

Dependence of mesomorphism on tail group in combination with a lateral methoxy group

A novel homologous series of esters with a lateral methoxy group and terminal n-heptyl cinnamate group was synthesized and studied to investigate mesomorphic behavior in relation to structure. The twelve membered series consists of methoxy to pentyloxy derivatives that are nonmesomorphic and the rest of the homologs as smectegenically mesomorphic, including C₆ and C₇ monotropic smectic and C₈ to C₁₆ enantiotropic smectic without exhibition of any nematic property. The textures of smectogenic mesophases are focal conic fan shaped or batonates of the type smectic-A or Schlieren-C. An odd-even effect is exhibited by the Sm–I transition curve in the phase diagram. The Cr–Sm and Sm-I transition curves behave in a normal manner. Transition temperatures and textures were determined on an optical polarizing microscope, equipped with a heating stage. Some representative members were characterized by IR, H¹NMR, mass spectra, and elemental analysis. Analytical data support the molecular structures of the homologs. Mesomorphic properties of the present novel series are compared with the structurally similar known series. The present series is smectogenic only, whose thermal average stability is 89.8^°C and of a middle-ordered melting type.     

Synthesis and mesomorphic behavior of symmetrical chiral liquid crystal dimers incorporating ester linked biphenyl- naphthyl cores and terminal vinyl group

A series of symmetrical chiral, liquid crystal dimeric molecules possessing ester- linked, biphenyl-naphthyl cores with varied spacer lengths and terminal vinyl groups have been synthesized using Naproxen as the synthetic precursor. The synthesized symmetrical chiral dimers were characterized by 1H NMR spectroscopy, and their liquid crystalline behavior was confirmed by DSC and HOPM studies. Structural effects on the mesomorphic and physicochemical properties were investigated in terms of variation of chiral chain length. The synthesized dimeric compounds exhibited SmX^*, SmC^*, SmA^*, N^*, BPI^*, and BPII^* mesophase sequences. An odd-even effect was observed in the dimers and the duration of the mesophase decreased with increasing spacer length. The synthesized vinyl substituted liquid crystalline dimers are particularly useful in understanding liquid crystal polymorphism and act as model compounds for liquid crystal polymers.     

Synthesis,characterization, and mesomorphic investigations of diester-substituted salicylaldimines and their copper (II) complexes

A novel homologous series of N-[4-[4′-n-alkoxy)benzoyloxy-2-hydroxybenzylidene)-4-carbethoxy anilines, H_2n+1C_nOC₆H₄C(O)OC₆H₃(OH)C(H)?NC₆H₄COOC₂H₅ (n = 6, 8, 10, 12, 14, 16) and their copper(II) complexes have been synthesized. All these compounds have been characterized by suitable spectroscopic techniques. The mesomorphic properties of these compounds were investigated by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). The ligands exhibit wide range of enantiotropic smectic A and nematic phases as confirmed by their typical optical texture under polarizing microscope. The square planar copper(II) complexes of the ligands show only an isotropic phase at higher temperature and no mesogenic nature is observed. DFT calculations have been performed using GAUSSIAN-03 program at B3LYP level to obtain the stable electronic structure of the ligand with decyloxy chain length and its copper(II) complex.     

Biphenyl-based liquid crystal precursors with alkanoate and hydroxyl group

We synthesized a series of 4′-hydroxy-[1,1′-biphenyl]-4-yl alkanoate with a potentially reactive functional hydroxyl group as a LC precursor, which facilitates reaction with other chemical groups to tailor biphenyl-based liquid crystals (LCs) for specific applications. Several liquid crystalline materials were also synthesized based on these LC precursors to show high probability to generate various potential LCs. With increasing chain length, the melting point decreased and R_f (retardation factor: migration distance of substance ÷ migration distance of solvent front) of the synthesized LC precursor increased. This LC precursor series provides a useful first synthesis step to design tunable biphenyl/ester-based LCs.     

In situ composites based on blends of PEEK and thermotropic liquid crystalline polymer

A series of blends were prepared by mixing pellets of the thermotropic liquid crystalline polymers (TLCP) with poly (ether ether ketone)(PEEK) in the dry state under injection mouldingmolding conditions. The mechanical properties of blends were measured, and it is proved that the mechanical properties of blends are better than those of their matrix. Compared with the thermoplastic matrix, the tensile modulus and strength of the blends increased obviously, with the addition of only 2 wt% LCP. At the same time, the addition of TLCP decreased the melt viscosity of the blends.     

Study on the vertical alignment of nematic liquid crystals by fumed silica doping

The alignment of liquid crystals is important in the manufacturing of devices. Usually, the alignment layer is prepared using a thin-film coating, thermal processing and processes such as rubbing or photo-alignment. Several trials without processes related to the alignment layer were performed for realizing vertical alignment. The main approaches were to utilize the self-assembly of the alignment agent on the substrate. Here, tiny amount of fumed silica, a kind of nano-particle, was added to nematic liquid crystals. With a low frequency electric field and thermal treatment, the region of vertical alignment was obtained. In addition, the efficiency of alignment was related to the polarity of the electric field. The vertical alignment by the fumed silica was active for negative polarity. This results in an easy and convenient way of obtaining vertical alignment.     

Synthesis and characterization of rigid rode shape homologous series: Effect of tail iodo group

Arylpiperazine derivatives referred in this article possessed antitumor activity, which were synthesized and crystallized through the gradual evaporation process. The molecular structures of 2-(4-(2-(4-phenylpiperazin-1-yl)ethyl)benzyl)isoindoline-1,3-dione (C27H27N3O2, 1), 2-(4-(2-(4-(4-bromophenyl)piperazin-1-yl)ethyl)benzyl)isoindoline-1,3-dione (C27H26BrN3O2, 2) and 2-(4-(2-(4-(4-chlorophenyl)piperazin-1-yl)ethyl)benzyl)isoindoline-1,3-dione (C27H26ClN3O2, 3) were determi-ned and described. π-π interactions were observed in the packing modes of three compounds, and compound 2 and 3 showed halogen interactions between molecules nearby, which were different from compound 1. The dihedral angle values, the bond lengths, bond angles and the parameters demonstrated that involvement of halogen atoms did affect the conformation, configuration and cell parameter of the compounds.     

Mesomorphism dependence on molecular rigidity and flexibility

A novel homologous series of mesogens was synthesized and studied with a view to understanding and establishing the relations between molecular structure and liquid crystal properties. Eleven members of the series were synthesized. Mesogenic behavior commences from the C₆ member and continues up to the C₁₄ member. The rest of the members, C₁ to C₅ and C₁₆, are non-mesogenic. Mesogenic homologues (C₆ to C₁₄) are enantiotropically nematogenic. Textures of nematic phase are threaded or Schlieren. Transition temperatures were determined by an optical polarizing microscope equipped with a heating stage. Analytical and structural data confirm the molecular structures of homologues. Thermal stability for nematic phase is 198.0°C. Mesomorphic phase length ranges from 11.0°C to 50.0°C. Cr-I/N and N-I transition curves of a phase diagram behave in normal manner from C₁ to C₁₂ members, and higher members C₁₄ and C₁₆ deviated from normal behavior. Mesogenic properties of present novel ester series are compared with the structurally similar series. Odd-even effect is missing for the N-I transition curve. Thus, the present series is partly nematogenic without exhibition of smectic property whose transition temperatures vary between 153°C and 210°C.     

Modification in dielectric properties of SWCNT doped ferroelectric liquid crystals

Effect of single walled carbon nanotubes (SWCNT) in ferroelectric liquid crystal (FLC) geometry has been studied for low and high concentrations of dopant. The results are compared with the characteristics of pure FLC system. An appreciable change in dielectric permittivity, relaxation behavior and other vital parameters has been observed for SWCNT doped FLC system, which shows the adaptability of carbon nanotubes with that of pure FLC molecule. Under high electric field, highly concentrated SWCNT doped FLC shows enormously large values of dielectric loss. This is due to the high conductivity of SWCNT at higher electric field. Interestingly, such effect is not much prominent for the low concentration of the SWCNT doped FLC system.     

Synthesis of four liquid crystals and study of alkyl chain effect on the nematic range for application in GC

Four liquid crystals (LCs) compounds which contain the 1,3,4-oxadiazole group were synthesized and characterized with spectroscopic techniques (IR, ¹H- and ¹³C NMR), their thermal properties were analyzed by the Differential Scanning Calorimetry (DSC) and the polarizing microscope (POM). A comparative study of the mesomorphic properties of these LCs and three other compounds which have already been used as a stationary phase in gas chromatography (GC) was carried out. These compounds have the same main nucleus. LCs V1, LC1, LC2 and LC3 gave a nematic (N) phase to the heating, LCs V2 and V3 recorded smectic A (SmA) and N phases. However, the range (N) has disappeared in V4.     

Characterisation and mesomorphic behaviour of liquid crystals with dispersed PdCl2 nanoparticles

The synthesis and characterisation are carried on liquid crystalline (LC) p-dodecyloxy benzoic acid (12OBA) with 1 and 2 wt% for PdCl₂ nanoparticles dispersion. Further, characterizations are carried out by different spectroscopic techniques like X-ray diffraction spectrometric studies, scanning electron microscopy, Fourier transform infrared and differential scanning calorimetry (DSC). Textural determinations of the synthesised compounds are recorded by using polarising optical microscope (POM) attached with a hot stage and camera. The results show that the dispersion of PdCl₂ nanoparticles in 12OBA exhibits Nematic phases as same as the pure 12OBA with reduced clearing temperature as expected. Further, the nematic thermal ranges are quenched and the smectic C thermal range has been increased while performing both DSC and POM with the dispersion of 1 wt% PdCl₂ nanoparticles. Size dependence on bonding nature with LC compounds is established.