Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

ESR study on the antioxidant activity of TAK-218 in biological model membranes

TAK-218 has a 2,3-dihydrobenzofuran-5-amine (coumaran) structure which resembles alpha-tocopherol, and is a promising candidate as an agent for central nervous system (CNS) trauma and ischemia. The radical scavenging activity of TAK-218 was studied using electron spin resonance (ESR) spectroscopy. TAK-218 exhibited a more potent scavenging activity towards the hydroxyl radical than did the well-known hydroxyl radical scavengers, mannitol and dimethylsulfoxide. Towards the superoxide radical, TAK-218 showed equal potency to glutathione. TAK-218 reacted rapidly with stable radicals, such as galvinoxyl and 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH), and gave the quinone as a two-electron oxidized product in analogy with alpha-tocopherol. To exhibit an excellent antioxidative activity in living systems, the compounds should not only have the intrinsic radical scavenging activity but also good distribution in the biological lipid-bilayer membrane. To examine the antioxidant activity of TAK-218, the inhibition of lipid peroxidation by alpha-tocopherol and TAK-218 in liposomal membranes was studied using an ESR spin-label technique. Both alpha-tocopherol and TAK-218 completely inhibited lipid peroxidation by radicals generated in an aqueous layer using a water-soluble radical initiator, 2,2'-azobis-(2-amidinopropane) hydrochloride (AAPH). At a high incubation temperature (45 degrees C), alpha-tocopherol scavenged radicals more effectively than TAK-218 on the surface of the membrane, while TAK-218 scavenged radicals more effectively in the interior of the membrane. The difference between TAK-218 and alpha-tocopherol for radical scavenging in the membrane system derives from the different distribution pattern of these compounds. TAK-218 can penetrate the membrane freely and can scavenge the radical in the membrane interior. Furthermore, TAK-218 was shown to inhibit lipid peroxidation initiated by a lipid soluble radical initiator, 2,2'-azobis-(2,4-dimethylvaleronitrile) (AMVN), in a membrane more effectively than alpha-tocopherol.     

Transport limitations in ion exchange membranes at low salt concentrations

In this work we show that the electrical resistance of ion exchange membranes strongly depends on the solution concentration: especially at low solution concentrations (<0.1 M NaCl) we observe a very strong increase in electrical resistance of the membrane with decreasing concentration. To understand and clarify this behavior we systematically investigate the influence of the solution concentration on ion transport phenomena in two anion exchange membranes (Neosepta AMX and Fumasep FAD) and two cation exchange membranes (Neosepta CMX and Fumasep FKD) in the concentration range from 0.017 M to 0.5 M NaCl and for different hydrodynamic conditions. The results are highly valuable for processes that operate in the low concentration range (<0.5 M) such as reverse electrodialysis, electrodialysis, microbial fuel cells and capacitive deionization, where the standard membrane characterization values as usually determined in 0.5 M NaCl solutions do not represent the practical application.     

Micellar electrokinetic chromatography at low pH with polyelectrolyte-coated capillaries

The performance of capillaries coated with a poly(diallyldimethylammonium) (PDADMA) monolayer or poly(diallyldimethylammonium)-poly(styrenesulfonate) bilayer was investigated and compared under micellar electrokinetic chromatographic (MEKC) conditions. Both monolayer (positively charged) and bilayer (negatively charged) coatings with micellar (sodium dodecyl sulfate) electrolyte generated very stable and pH-independent cathodal electroosmotic flow (EOF). From the results obtained, it can be concluded that in a doubly coated capillary the second poly(styrenesulfonate) layer is replaced by sodium dodecyl sulfate micelles during flushing with micellar electrolyte. Consequently, in order to obtain a stable and pH-independent cathodal electroosmotic flow for the MEKC separations, the capillary coating with the second polyanion layer is not necessary. The importance of the PDADMA coating was illustrated by comparing MEKC separations of the common developing agents (hydroquinone, phenidone, pyrocatechol, pyrogallol and quinone) on a bare uncoated capillary with the coated capillary. The coating provides reproducible MEKC separations at low pH (pH 3.0) with relative standard deviation (R.S.D.) values for migration times and peak areas lower than 0.45 and 3.3%, respectively. Good linearities in the range from 5 x 10(-5) to 2 x 10(-3) mol l(-1) were obtained for all five compounds, with correlation coefficients higher than 0.998. The detection limits were in the range from 5 x 10(-6) mol l(-1) for pyrocatechol to 2 x 10(-5) mol l(-1) for quinone. The proposed MEKC system was applied to the determination of hydroquinone and phenidone in X-ray photographic developer solutions.     

Blue emitting gold nanoclusters templated by poly-cytosine DNA at low pH and poly-adenine DNA at neutral pH

Blue fluorescent gold nanoclusters were prepared in the presence of poly-cytosine DNAs at low pH and poly-adenine at neutral pH using citrate as the reducing agent; various buffer conditions affecting the synthesis have been explored.     

Chromatographic and physical studies of tropomyosin in aqueous-organic media at low pH

Non-cross-linked and disulfide-cross-linked two-chain molecules comprising the alpha and/or beta chains of rabbit skeletal tropomyosin were studied by electrophoretic, chromatographic and physical methods. Elution order on C4 reversed-phase high-performance liquid chromatography depends markedly on the number and position of the cross-links. In the C4 reversed-phase elution medium, cross-linked and non-cross-linked species are greater than 85% helical by circular dichroism, but the non-cross-linked elute later from high-performance size-exclusion chromatography (G4000) and have molecular mass of 31,000-41,000 dalton by equilibrium ultracentrifugation. The data suggest that in the C4 reversed-phase high-performance liquid chromatography elution medium non-cross-linked tropomyosin exists as amphipathic single-chain alpha-helices.     

Interactions between sphingomyelin and cholesterol in low density lipoproteins and model membranes

This work examines three related, but previously unexplored, aspects of membrane biophysics and colloid science in the context of atherosclerosis. First, we show that sphingomyelinase (SMase)-induced aggregation of low density lipoproteins (LDLs), coupled with LDL exposure to cholesterol esterase (CEase), results in nucleation of cholesterol crystals, long considered the hallmark of atherosclerosis. In particular, this study reveals that the order of enzyme addition does not effect the propensity of LDL to nucleate cholesterol crystals, raising the possibility that nucleation can proceed from either the intra- or extracellular space. Second, we demonstrate that ceramide-rich aggregates of LDL release cholesterol to neighboring vesicles far more rapidly, and to a greater extent, than does native LDL. A likely explanation for this observation is displacement of cholesterol from SM–Chol rafts by “raft-loving” ceramide. Third, we demonstrate that a time-independent Förster resonance energy transfer (FRET) assay, based on dehydroergosterol and dansylated lecithin and used previously to study cholesterol nanodomains, can be used to measure raft sizes (on the order of 10 nm) in model membrane systems. Taken together, these observations point to the possibility of an extracellular nucleation mechanism and underscore the important role that biological colloids play in human disease.     

Separation of native amino acids at low pH by capillary electrophoresis

Amino Acids are cations at low PH and can be readily separated by capillarty electrophoresis provided an alkanesulfonic acid is added to the elecrolyte carrier. Formation of a Positive net charge on the bare fused-silica surface at low PH was confirmed by measurement of an anodic electroosmotic flow. The addition of ethanesulfonic acid or octanesulfonic acid to the electrolyte carrier causes a reversal of the EOF. A mechanism is proposed in which the alkanesulfonic acid adsorbs to the positively-charged capillary wall through electrostatci attraction. Adsorption of a second molecule of alkanesulfonate by hudrophobic attraction to the carbon chain forms a negatively-charge coating on the capillary wall. The alkanesuflfonate also imparts selectivety to the system by participation in ionpairing interactions with the native amino acids to improve resolution. The CE separation of a mixture of the twenty common amino acids at PH 2.8 with direct absorabance detection at 185 nm resulted in 17 amino acid peals in 20 minutes with a 30 KV applied voltage. The effect of several variables was studied including electrolyte carrieres containing different alkanesulfonic acids, the influence of PH, applied voltage, and concentration of electrolyte carrier.     

Evaluation of the zirconia pH sensor at 95° C

An yttria-stabilized zirconia electrode for measuring pH at elevated temperature and pressure has been described by Niedrach, who verified its response at 95°C in comparison with glass pH electrodes. The present paper reports studies at 95° C on zirconia tubes available from three different commercial sources. This study, conducted with conventional aqueous internal filling solution and conventional internal and external reference electrodes, was designed to obtain fundamental pH electrode parameters of slope, resistance, asymmetry potential, and time of response in standard buffers and known strength acids and bases. A coulometric experiment is reported to aid in assessing the efficiency of the zirconia electrode. Uncertain performance found in this evaluation may be attributed to chemical, physical, and surface problems in the commercially available zirconia tubes or to less than ideal pH response for zirconia membranes.     

Wettability switching between high hydrophilicity at low pH and high hydrophobicity at high pH on surface based on pH-responsive polymer

Surfaces obtained by modifying poly(N,N'-dimethylaminoethyl methacrylate) (PDMAEMA) on rough silicon substrates are highly hydrophilic at low pH and highly hydrophobic at high pH; such surfaces effectively supplement the research on the wettability of solid surfaces based on the pH-responsive polymers.     

Oxygen production at low temperature using dense perovskite hollow fiber membranes

A dense perovskite hollow fiber made of BaCo_xFe_yZr_zO_3−δ (BCFZ) was evaluated for the oxygen separation at low temperatures (400–500 °C). An oxygen permeation flux of 0.45 ml/min cm² was obtained at 500 °C, which is the first oxygen permeation data reported at such low temperature so far. A degradation of the oxygen permeation at 500 °C was observed, but the oxygen fluxes through the hollow fiber membrane can be regenerated by thermal treatment at 925 °C for 1 h in air. Energy-dispersive X-ray spectroscopy (EDXS) shows that a strong element segregation occurs in the membrane during operation at low temperature.     

Electrochemical oxidation of barbituric acids at low pH in the presence of chloride ion

Barbituric acid, 1-methylbarbituric acid and 1,3-dimethylbarbituric acid are electrochemically oxidized at the pyrolytic graphite electrode by way of a single voltammetric peak at pH 1 in the presence of chloride ion. At least four products are formed as a result of the reaction, the three major products, accounting for more than 80–90% of the oxidized barbituric acid, are the appropriately N-methylated 5,5′-dichlorohydurilic acids, 5,5-dichlorobarbituric acids and alloxans. The mechanism appears to proceed by an initial potential-controlling 1e/1H⁺ oxidation of the barbituric acids to give a barbituric acid radical. This can dimerize to hydurilic acid, which is then further electrochemically oxidized. However, this appears to be a minor route. The barbituric acid radical appears to be mainly further electrooxidized (1e) to a carbonium ion which further reacts with nucleophiles such as chloride ion to give 5-chlorobarbituric acid, or with water to give dialuric acid. Further electrochemical oxidation and chemical reactions of the latter species results in formation of the ultimate products.     

Ethanol fermentation of various pretreated and hydrolyzed substrates at low initial pH

Lignocellulosic materials represent an abundant feedstock for bioethanol production. Because of their complex structure pretreatment is necessary to make it accessible for enzymatic attack. Steam pretreatment with or without acid catalysts seems to be one of the most promising techniques, which has already been applied for large variety of lignocellulosics in order to improve enzymatic digestibility. During this process a range of toxic compounds (lignin and sugar degradation products) are formed which inhibit ethanol fermentation. In this study, the toxicity of hemicellulose hydrolysates obtained in the steam pretreatment of spruce, willow, and corn stover were investigated in ethanol fermentation tests using a yeast strain, which has been previously reported to have a resistance to inhibitory compounds generated during steam pretreatment. To overcome bacterial contamination, fermentations were carried out at low initial pH. The fermentability of hemicellulose hydrolysates of pretreated lignocellulosic substrates at low pH gave promising results with the economically profitable final 5 vol% ethanol concentration corresponding to 85% of theoretical. Adaptation experiments have shown that inhibitor tolerance of yeast strain can be improved by subsequent transfer of the yeast to inhibitory medium.     

Application of capillary electrophoresis at low pH to oligonucleotides quality control.

A method for oligonucleotides analysis by using capillary electrophoresis at low pH in free solution is described. It may be considered an alternative to classical analytical techniques which use basic buffers and require the presence of sieving media to separate oligonucleotides as a function of their length. On the contrary, at low pH oligo nucleotides can be separated only depending on their base composition. A large set of samples consisting of 72 synthetic oligonucleotides bearing a 5'-alkylamine moiety and designed for HLA genotyping were analysed. The quality of these synthetic oligos was easily assessed, and a single base difference in oligonucleotides of equal sequence was detected. The results suggest the application of this method to the emerging field of mutation detection and single nucleotide polymorfism analysis.     

Effect of pH on hydrophilicity and charge and their effect on the filtration efficiency of NF membranes at different pH

In this work the effect of pH on membrane structure, its permeability and retention was studied. In addition, we studied whether the possible changes in the membrane properties due to the pH change are reversible. This is important for understanding the performance of nanofiltration membranes at different conditions and for the selection of cleaning processes. Moreover, the results facilitate the choice of membrane for specific applications.

Several commercial NF membranes were studied at different pH values. Their retention and flux were explained by the charge and the hydrophilic characteristics of the membranes. The filtrations were made with uncharged sugar and salt solutions.

The lower the membrane contact angle (i.e., a more hydrophilic membrane) the higher was the change in apparent zeta potential when pH was increased from 4 to 7. As a result, the retention of ions with more hydrophilic membranes changed more than hydrophobic ones when the pH was increased in the feed solution. However, some membranes retained ions well at high pH although their apparent zeta potential or hydrophilicity was relatively low. These membranes had charge inside the pores and it was not detected by streaming potential measurement along the surface or by measuring the contact angle of the surface. Thus, the apparent zeta potential of the exterior membrane surface did not sufficiently describe the ionic transport through the membrane. In addition, some membranes became significantly more open at high pH (i.e., flux increased). This was explained by the chemical nature of the polymer chains in the membrane skin layer, i.e., dissociating groups in the polymer made the surface more hydrophilic and looser when charges of the polymer chains started to repel each other at elevated pH. Generally, the retention of uncharged glucose decreased more at high pH than the salt retention. The changes in permeabilities and retentions were found to be mostly reversible in the pH range studied (very slowly in some cases, however).     

Bio-friendly synthesis of ZnO nanoparticles in aqueous solution at near-neutral pH and low temperature

ZnO nanoparticles are synthesized using a new bio-friendly method. The experimental conditions are very mild: aqueous solution at near-neutral pH and 37 degrees C. The as-obtained nanoparticles show the stable wurtzite structure without the need of annealing. The two reagents used are aqueous solutions of zinc nitrate and buffer tris(hydroxymethyl)aminomethane. This is a standard nontoxic buffer and inert to a wide variety of chemicals and biomolecules, therefore extremely satisfactory for biochemical reactions. Furthermore, this is a polydentade ligand which adsorbs strongly on one or more surfaces of ZnO inhibiting its crystal growth and yielding nearly spherical ZnO nanoparticles. Our objective is to use the crystallization method described here for further incorporation of biomolecules as additives in the reaction solution, aiming at the formation of ZnO with new physical properties.     

Monomer reactivity ratios of N-isopropylacrylamide-itaconic acid copolymers at low and high conversions

Copolymers of N-isopropylacrylamide (NIPAAm) and itaconic acid (IA) having various compositions were synthesized using free radical solution polymerization in 1,4-dioxane at 50 °C with α,α′-azobisisobutyronitrile (AIBN) as initiator. The structures of the copolymers were confirmed by Fourier transform infrared (FTIR) spectroscopic technique. The copolymer compositions were determined by conductometric and potentiometric methods from the inflection points in the acid-base titration curves and by FTIR spectroscopy through recorded analytical absorption bands for NIPAAm (1620 cm⁻¹ for CO stretching of secondary amides) and for IA (1704 cm⁻¹ for CO stretching) units, respectively. Monomer reactivity ratios of IA (F₁)-NIPAAm (F₂) pair were estimated using the Finemann-Ross, the inverted Finemann-Ross, the Kelen-Tüdós and the extended Kelen-Tüdós graphical methods. The values ranged from 0.40 to 0.60 for r₁ and from 1.20 to 1.90 for r₂, depending on the conversion percentage, calculation methods of monomer reactivity ratios and determination methods of copolymer compositions. In all cases, r₁r₂ < 1 and r₁ < r₂ indicate the random distribution of the monomers in the final copolymers and the presence of higher amount of NIPAAm units in the copolymer than that in the feed, respectively.     

Acetaldehyde solid state reactivity at low temperature: formation of the acetaldehyde ammonia trimer

We focus on low temperature reactivity from 25 to 300 K, in ice containing acetaldehyde, ammonia, and formic acid. We show that the warming of this ice mixture forms the acetaldehyde ammonia trimer (2,4,6-trimethyl-1,3,5-hexahydrotriazine, C(6)H(15)N(3)) after five steps. The reaction is monitored by FTIR spectroscopy and mass spectrometry. We propose a mechanism for its formation that differs from the one proposed in the liquid phase. The reaction intermediates, α-aminoethanol (from 80 K) and ethanimine (formed at 180 K), have been identified by a mechanistic approach: each step of the reaction has been treated separately. The chemical implications and the astrophysical relevance of the study are also discussed.     

13C CP/MAS NMR studies of vitamin E model compounds

13C cross-polarization magic angle spinning (CP/MAS) NMR data for 2,2,5,7,8-pentamethylchroman-6-ol (2), 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox c) (3) and its acetate (4), 2-methoxy-2,2,5,7,8-pentamethylchroman-6-ol (5), 2-hydroxy-2,2,5,7,8-pentamethylchroman-6-ol (6) and 2,2,5,7,8-pentamethylchroman (7) are reported. A deshielding of 7.7 ppm for the carboxylic carbon was observed in solid Trolox due to formation of intermolecular hydrogen bonds within cyclic dimers. Such crystal packing permits effective cross-polarization and fast relaxation (short T1rho(H)). The impact of the proton concentration on the CP dynamics is reflected by the longer T(CP) and T1rhoH for Trolox-d2 (deuterated at mobile proton sites). The calculated GIAO RHF shielding constants are sensitive to intramolecular effects: rotation around the C-6-O bond (changes of sigma up to 8 ppm) and conformation at C-2.