Preparation and thermal properties of a novel core‐shell structure flame‐retardant copolymer

In order to improve the flame retardancy of polystyrene (PS), a phosphorus and nitrogen comonomer, named AC₂NP₂, was synthesized and then incorporated into various amounts of PS by seeded emulsion polymerization. The modified methacrylate (AC₂NP₂) was used as the core phase, the styrene as the shell phase, then flame‐retardant effect copolymers with core‐shell structure were prepared successfully. The particle size was ranged from 40 to 60 nm, and the structure and properties of the copolymers were characterized in detail. Notably, despite a few amounts of the AC₂NP₂ units in the copolymers, all the copolymers exhibited significantly enhanced thermal stability and reduced flammability as compared with pure PS. Furthermore, from differential scanning calorimetry test, it was observed that the glass transition temperature was tinily influenced with the incorporation of commoner. The incorporation of P‐N comonomer into PS backbone did not lead to negative effect on the glass transition behavior of PS.     

Preparation of gel‐silica/ammonium polyphosphate core‐shell flame retardant and properties of polyurethane composites

A novel intumescent gel‐silica/ammonium polyphosphate core‐shell flame retardant (MCAPP), which contains silicon, phosphorus, and nitrogen, has been prepared by in situ polymerization. The structure of MCAPP was characterized by Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The properties of MCAPP were investigated by water solubility, hydrophilicity, and morphological determination. The flame retardancy and thermal stability of polyurethane (PU) composite with MCAPP were evaluated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, and thermogravimetric analysis (TGA). The results showed that MCAPP could decrease the heat release rate (HRR) and increase the thermal stability of PU materials greatly. Finally, water‐resistant properties of PU/FR composites were also studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of flame‐retardant ramie fiber on enhancing performance of the rigid polyurethane foams

Ramie fiber (RF) with excellent tensile strength was treated by a flame retardant and obtained the modified RF (MRF) that is incombustible. Then, MRF was used to improve the performance of rigid polyurethane foams (RPUF). The mechanical properties of the composite were investigated by compressive strength test and shear stress test. The fire characteristics were studied using a cone calorimeter. And the thermal decomposition and flammable properties were further evaluated using thermogravimetric analysis and limiting oxygen index. The results showed that MRF improve the mechanical properties of RPUF and eliminate the harm of flammability of RF on the RPUF.     

The synergistic flame‐retardant effect of O‐MMT on the intumescent flame‐retardant PP/CA/APP systems

The flame retardancy of a novel intumescent flame‐retardant polypropylene (IFR‐PP) system, which was composed of a charring agent (CA), ammonium polyphosphate (APP), and polypropylene (PP), could be enhanced significantly by adding a small amount (1.0 wt%) of an organic montmorillonite (O‐MMT). The synergistic flame‐retardant effect was studied systematically. The thermal stability and combustion behavior of the flame‐retarded PP were also investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). TGA results demonstrated that the onset decomposition temperatures of IFR‐PP samples, with or without O‐MMT, were higher than that of neat PP. Compared with IFR‐PP, the LOI value of IFR‐PP containing 1.0 wt% O‐MMT was increased from 30.8 to 33.0, and the UL‐94 rating was also enhanced to V‐0 from V‐1 when the total loading of flame retardant was the same. The cone calorimeter results showed that the IFR‐PP with 1.0 wt% of O‐MMT had the lowest heat release rate (HRR), total heat release (THR), total smoke production (TSP), CO production (COP), CO₂ production (CO₂P), and mass loss (ML) of all the studied IFR‐PP samples, with or without O‐MMT. All these results indicated that O‐MMT had a significantly synergistic effect on the flame‐retardancy of IFR‐PP at a low content of O‐MMT. Copyright © 2009 John Wiley & Sons, Ltd.     

Synergistic effect between phosphorus tailings and aluminum hypophosphite in flame‐retardant thermoplastic polyurethane composites

The massive accumulation of phosphorus tailings (PT) not only occupies land resources and also causes great threat to ecological environment and human security. It is of great significance to explore the resource utilization of PT in some fields. Herein, aluminum hypophosphite (AHP) and PT are blended together to enhance the flame retardancy of thermoplastic polyurethane (TPU) composites, and the synergistic effects between AHP and PT are investigated systematically. Cone calorimeter test (CCT) results indicate that the peak heat release rate (PHRR) and total heat release (THR) of the samples containing 25 wt% AHP are decreased by 89% and 68%, respectively, and the total smoke release (TSR) show a reduction of 58.8%, in comparison with those of neat TPU. For the sample TPU/22.5AHP/2.5PT, the PHRR, THR, and TSR are decreased by 91.2%, 70%, and 63%, respectively. Scanning electron microscopy (SEM) analysis results demonstrate that the addition of PT can facilitate the generation of dense and compact char layers, preventing the release of heat and smoke effectively. All the abovementioned results indicate that the synergistic effects are existed between AHP and PT for enhancing the fire safety of TPU composites, which can provide a new way for the utilization of PT.     

Synthesis and mechanical strength of a novel double network nanocomposite hydrogel with core‐shell structure

A novel poly[(dimethylimino)(2‐hydroxy‐1,3‐propanedily)chloride]/Laponite/polyacrylic acid (PDMIHPC/Clay/PAA) hydrogel was synthesized by two‐step solution polymerization combining the strategies of both nanocomposite (NC) gels and double network (DN) gels. The chemical composition and core‐shell structure of the hydrogels were confirmed by Fourier transform infrared (FTIR) and transmission electron microscopy (TEM). The mechanical strength was examined by varying the reaction temperature, PDMIHPC/Clay composite dose, N,N′‐methylenebisacrylamide (MBAM) dose and water content. When the reaction temperature was 35°C, PDMIHPC/Clay composite/AA is 1:10 and MBAM dose was 0.050 wt% (based on the weight of AA), the novel hydrogel achieved a best compressive strength of 100.05 KPa with a water content of 98.8%. Copyright © 2011 John Wiley & Sons, Ltd.     

Joint‐aggregation intumescent flame‐retardant effect of ammonium polyphosphate and charring agent in polypropylene

In order to explore the structure mode of intumescent flame retardants (IFRs) with higher efficiency, IFR particles with joint‐aggregation structure (@IFR) were obtained through the treatment of ammonium polyphosphate (APP) and a charring agent (PT‐Cluster) in their aqueous solution. Then, the joint‐aggregation IFR effect was researched using its application in polypropylene. In case of 20 wt% IFR loading, the limiting oxygen index (LOI) value of @IFR/PP was 1.1% higher than that of 15APP/5PT‐Cluster/PP mixture, and a 1.6 mm‐thick @IFR/PP composite passed the UL 94 V‐2 rating test, while 15APP/5PT‐Cluster/PP demonstrated no flame‐retardant rating in UL 94 vertical burning tests. In a cone calorimeter test, @IFR also had a better inhibition effect on heat release. The average heat release rate (av‐HRR) value during 0 to 120 seconds of @IFR/PP was only 41 kW m^?2, which was 33.9% lower than that of the 15APP/5PT‐Cluster/PP. Furthermore, the peak heat release rate (pk‐HRR) of @IFR/PP was 20.5% lower than that of 15APP/5PT‐Cluster/PP, and the time to pk‐HRR of @IFR/PP was 710 seconds, while that of 15APP/5PT‐Cluster/PP was 580 seconds. The better inhibition effect on HRR and the delay of time to pk‐HRR were caused by the joint‐aggregated structure of @IFR, which can rapidly react to form stable and efficient char layers. This kind of join‐aggregation IFR effect has great significance in suppressing the spread of fire in reality. In addition, @IFR also increased the mechanical properties of PP composites slightly compared with the APP/PT‐Cluster mixture.     

Solid mechanochemical preparation of core‐shell SiO2 particles and their improvement on the mechanical properties of PVC composites

In this article, a solid mechanochemical route to prepare core‐shell structured particles was introduced. X‐ray photoelectron spectrum, transmission electron microscope and dissolving experimental results indicated the formation of [(inorganic particle)/(elastomer)] core‐shell structured particles. The thermal stable experiments showed that untreated SiO₂ can cause dehydrochlorination of poly(vinyl chloride) (PVC) and discoloration of PVC/SiO₂ composites and the formation of core‐shell structured SiO₂ particles will improve the thermal stability of PVC/SiO₂ composites. The mechanical properties and rheological results showed that the formation of core‐shell structured SiO₂ particles can both improve the mechanical and processing properties of PVC/SiO₂ composite. ACR in PVC/(SiO₂‐PMMA‐ACR) composites acted not only as toughener for PVC matrix but also as cushion breaker if the content of ACR is enough. Meanwhile compared with other SiO₂ particles the formation of core‐shell structured SiO₂ particles can decrease the apparent viscosity, increase the critical shear rate and improve the appearance of extrudes of PVC/SiO₂ composites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 938–948, 2008     

Fabrication of ZIF‐8@Polyphosphazene core‐shell structure and its efficient synergism with ammonium polyphosphate in flame‐retarding epoxy resin

A novel zeolitic imidazolate framework (ZIF‐8) nanoparticles@polyphosphazene (PZN) core‐shell architecture was synthesized, and then, ZIF‐8@PZN and ammonium polyphosphate (APP) were applied for increasing the flame retardancy and mechanical property of epoxy resin (EP) through a cooperative effect. Herein, ZIF‐8 was used as the core; the shell of PZN was coated to ZIF‐8 nanoparticles via a polycondensation method. The well‐designed ZIF‐8@PZN displayed superior fire retardancy and smoke suppression effect. The synthesized ZIF‐8@PZN observably raised the flame retardancy of EP composites, which could be demonstrated by thermogravimetric analysis (TGA) and a cone calorimeter test (CCT). The chemical structure of ZIF‐8@PZN was characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with pure epoxy, with the incorporation of 3 wt% ZIF‐8@PZN and 18 wt% APP into the EP, along with 80.8%, 72.6%, and 64.7% decreased in the peak heat release rate (pHRR), the peak smoke production rate (pSPR), and the peak CO production rate (pCOPR), respectively. These suggested that ZIF‐8@PZN and APP generated an intumescent char layer, and ZIF‐8@PZN can strengthen the char layer, resulting in the enhancement in the flame resistance of EP.     

Mechanical and flame‐retardant properties of biodegradable polylactide composites with hyperbranched silicon‐containing polymer

A hyperbranched polymer (HBP‐B2) containing siloxane chains was synthesized via bulk polymerization of diepoxide with a primary amine in the presence of monoepoxide. The weight‐average molecular weight of the prepared polymers was approximately 9200. Composites of polylactide (PLA) with aluminum trihydroxide (ATH) and the HBP‐B2 were prepared via direct melt compounding using a brabender. The test results showed that the LOI could be raised to 34% for the PLA composite with 25 wt% ATH and 5% HBP‐B2. The surface thermal profile of the composite during UL94 V test was further captured by an infrared camera, which was helpful to understand the flame‐retardant properties of the different samples. A V‐0 rating could be achieved by adding ATH and HBP‐B2 to the PLA matrix. Incorporation of HBP‐B2 as a plasticizer could increase the impact strength of a PLA blend or composite. For example, an addition of 10 wt% of HBP and 20 wt% ATH increased the elongation at break from 5% for neat PLA to 155% for the PLA composite.     

Development and characterization of fully bio‐based polybenzoxazine‐silica hybrid composites for low‐k and flame‐retardant applications

In the present work, new classes of bio‐based polybenzoxazines were synthesized using eugenol as phenol source and furfurylamine and stearylamine as amine sources separately through solventless green synthetic process routes and were further reinforced with varying percentages (1, 3, 5, and 10 wt%) of silica (from rice husk) to attain hybrid composites. The molecular structure, cure behaviour, thermal stability, dielectric properties, and flame‐retardant behaviour of both benzoxazine monomers and benzoxazine composites were characterized using appropriate modern analytical techniques. The eugenol‐based benzoxazines synthesized using furfurylamine (FBz) and stearylamine (SBz) were cured at 223°C and 233°C, respectively. The differential scanning calorimetry (DSC) data reveal the glass transition temperatures (T_g) of FBz and SBz were 157°C and 132°C, respectively, and the maximum decomposition temperature (T_max) as obtained from thermogravimetric analysis (TGA), were found to be 464°C and 398°C for FBz and SBz, respectively. The dielectric constants for FBz and SBz obtained at 1 MHz were 3.28 and 3.62, respectively. Furthermore, varying weight percentages (1, 3, 5, and 10 wt%) of 3‐mercaptopropyltrimethoxysilane (3‐MPTMS) functionalized bio‐silica reinforced the composite materials as evidenced by their improved thermal stability and lower dielectric constant. Data obtained from thermal and dielectric studies suggested that these polybenzoxazines could be used in the form of adhesives, sealants, and composites for high performance inter‐layer low‐k dielectric applications in microelectronics.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneously improving the thermal conductive and flame retardant performance for epoxy resins thermosets by constructing core‐shell‐brush structure and distributing of MWCNTs in brush intervals

Fire safety and thermal dissipation performance of epoxy resins thermosets were critical for its application in key fields such as electronic devices. The simultaneous improvement of flame retardant and thermal conductivity properties were still a challenge. Herein, ammonium polyphosphate (APP) was firstly encapsulated with 5‐wt% epoxy resins based on APP and then surface grafted with polyurethane polymer chain, and the resulting APP with core‐shell‐brush structure was constructed. Finally, the multiwalled carbon nanotube (MWCNT) was assembled in the intervals of polymer brush on APP surface, and the prepared filler was defined as MF‐APP. Its chemical structure and morphologies were characterized and confirmed. The wettability of MF‐APP was evaluated by water contact angles tests (WCA) and MF‐APP exhibited hydrophobic property with the WCA of 138°. When 9‐wt% MF‐APP was incorporated into EP thermosets, the thermal conductive value of EP/MF‐APP achieved 1.02 Wm^?1 K^?1, and the MWCNTs concentration was only 1.8 wt% in thermosets. Compared with the previous work, the prepared EP/MF‐APP thermosets exhibited outstanding thermal conductive efficiency because of the homogeneously distribution of MWCNTs. Moreover, the samples fulfilled UL‐94 V‐0 grade during vertical burning tests with the limiting oxygen index of 30.8%. As a result, the thermal conductivity and flame retardancy of EP thermosets were simultaneously enhanced with a relatively low addition amount of MF‐APP, which would bring more chance for wider application of EP thermosets in key fields.     

Synergistic effects of ferric pyrophosphate (FePP) in intumescent flame‐retardant polypropylene

Ferric pyrophosphate (FePP) was added to an ammonium polyphosphate (APP)—pentaerythritol (petol) intumescent flame retardant (IFR) system in polypropylene (PP) matrix, with subsequent investigation into the synergistic effect between FePP and the IFRs. Limited oxygen index (LOI), UL‐94 test and cone calorimeter test were employed to study the flame retardance of the synthesized flame retardant PP composites. Thermogravimetric analysis (TGA) and thermogravimetric analysis‐infrared spectrometry (TG‐IR) were used to study their thermal degradation characteristics and gas products. TG‐IR results demonstrate that there is no Fe (CO)₅ produced from PP/IFR/FePP system, which implies that the flame retardant mechanism of PP/IFR/FePP system is in the condensed phase rather than in the gas phase. Real time FTIR and X‐ray photoelectron spectroscopy (XPS) were used to monitor the thermal oxidative stability and the high temperature performance of the flame retardant PP composites. The real time FTIR spectra show that all peaks around 2900 cm^?1 almost disappear at 380°C for the PP/IFR system, meaning that PP decomposes completely at this temperature. But after the addition of 2 wt%wt% FePP, the peaks still exist till 400°C. XPS shows that the aliphatic carbon atom content in PP/23 wt%wt% IFR/2 wt%wt% FePP (63.8%) is much higher than the one without FePP, and the total oxygen atom content in PP/23 wt%wt% IFR/2 wt%wt% FePP is just 19.1%, while the one in PP/25 wt% IFR is as high as 35.7%. Copyright © 2009 John Wiley & Sons, Ltd.     

Photocrosslinking and related properties of intumescent flame‐retardant LLDPE/EVA/IFR blends

The photoinitiated crosslinking of halogen‐free flame retarded linear low density polyethylene/poly(ethylene‐co‐vinyl acetate) blends (LLDPE/EVA) with the intumescent flame retardant (IFR) of phosphorous‐nitrogen compound (NP) in the presence of photoinitiator and crosslinker and their characterization of related properties have been investigated by gel determination, heat extension test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier transfer infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), mechanical properties measurements, limiting oxygen index (LOI), UL‐94, and water resistance test. The data from the gel content and heat extension rate (HER) show that the LLDPE/EVA/IFR blends filled with NP are readily crosslinked to a gel content of above 75% and the HER values reach about 50% by UV‐irradiation of 5 sec under suitable amount of photoinitiator and crosslinker. The data obtained from the CCT and LOI indicate that photocrosslinking can considerably decrease the heat release rates (HRR) by 10–15%, prolongate the combustion time, and increase two LOI values for the LLDPE/EVA/NP blends UV irradiated for 5 sec. The results from TGA and the dynamic FTIR spectra give the evidence that the photocrosslinked LLDPE/EVA/NP samples show slower thermal degradation rate and higher thermo‐oxidative degradation temperature than the uncrosslinked LLDPE/EVA/NP samples. The morphological structures of charred residues observed by SEM give the positive evidence that the compact charred layers formed from the photocrosslinked LLDPE/EVA/NP samples play an important role in the enhancement of flame retardant and thermal properties. The data from the mechanical tests and water‐resistant measurements show that photocrosslinking can considerably improve the mechanical and water‐resistant properties of LLDPE/EVA/NP samples. Copyright © 2011 John Wiley & Sons, Ltd.     

IR spectra studies of core‐shell type waterborne polyacrylate‐polyurethane microemulsions

The hydrogen bonds in films of the polyurethane and the core‐shell type polyacrylate‐polyurethane microemulsions have been studied by FTIR spectroscopy in the regions of  NH absorption and CO absorption. The effects on hydrogen bonds of the composition, the core‐shell ratio were revealed. At the same time, the relationship between the hydrogen bonds and the crosslinked structures (Type A and Type B) was discovered. The shifts of the  NH and CO stretching bands to higher frequencies and the shift of  NH bending bands to lower frequencies, with the increase of acetone CO number in the core, mean that the hydrogen bonds between the soft and hard segments, and those in the short‐range order in the hard segment phase, are broken. The dipole/dipole interaction which is supposed to exist between the acetone CO groups in the core and the urethane CO in the shell can change the hydrogen bond distribution in the shell, and at the same time, lead to hydrogen bonds between acetone CO in the core and the urethane  NH in the shell. Type A and B crosslinked structure between the core and the shell located at the interface of the core and the shell can confine the acetone CO within the crosslinking network, and Type B crosslinked structure also decreases the acetone CO numbers. These weaken the dipole/dipole interaction between the acetone CO and the urethane CO, and lead to the decrease of the effect of the acetone CO groups on the hydrogen bond distribution in the shell. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2642–2650, 1999     

Preparation of flame‐retardant polyamide 6 by incorporating MgO combined with g‐C3N4

Flame‐retardant polyamide 6 (PA6) was prepared by an inorganic‐organic composite (MCN or MgO/g‐C₃N₄) synthesized by incorporating magnesium oxide (MgO) combined with graphitic carbon nitride (g‐C₃N₄). As compared to g‐C₃N₄, MCN possessed a laminate structure, more holes, and a larger specific surface area. The addition of MCN could effectively improve the flame retardancy and mechanical properties of PA6 due to its better compatibility and dispersion in the PA6 matrix. When the addition of MCN was 20 wt%, the vertical combustion performance of the PA6/MCN sample reached flammability rating V‐0 (UL‐94) and the limiting oxygen index (LOI) was up to 32.1%. The results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) revealed that the introduction of MCN efficiently enhanced thermal stability of PA6. The morphologies of the char residue observed by scanning electron microscopy (SEM) verified that MCN promoted the formation of sufficient, compact, and homogeneous char layers on the composite's surface during burning. Thus led to increase the char layer strength and improve the flame retardancy of PA6. The thermogravimetric analysis/infrared (TG‐IR) revealed the gas‐phase retardancy mechanism of MCN. Compared with PA6/g‐C₃N₄, PA6/MCN showed better mechanical properties in terms of flexural strength and tensile strength.     

Flame‐retardant and mechanical properties of phenolic foams toughened with polyethylene glycol phosphates

Three kinds of polyethylene glycol phosphates (PEGPs) toughening agents were synthesized by esterification of phosphorus pentoxide (P₂O₅) with polyethylene glycol and characterized by Fourier transform infrared spectra and ³¹P nuclear magnetic resonance. A series of lightweight phenolic foams toughened with different loadings of PEGPs were prepared. Optical microscopy results show that the addition of PEGPs with small molecular weight PEG improves the structural homogeneity of phenolic foams obviously. The flame retardancy of toughened phenolic foams was evaluated by using UL 94, limiting oxygen index, and cone calorimeter. The results indicate that the incorporation of PEGPs not only increases the toughness of phenolic foams but also improves their flame retardancy. Moreover, the thermal stability of PEGPs and the toughened foams was investigated by thermogravimetric analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of polypropylene/ethylene‐propylene‐diene terpolymer/nitrile rubber ternary thermoplastics vulcanizates with good mechanical properties and oil resistance by core‐shell dynamic vulcanization

As the most successful commercialized thermoplastic vulcanizates (TPVs), polypropylene (PP)/ethylene propylene rubber (EPDM) TPVs exhibit poor oil resistance. In this work, we prepared PP/EPDM/butadiene acrylonitrile rubber (NBR) ternary TPVs with good oil resistance using core‐shell dynamic vulcanization. According to the theoretical analysis of the spreading coefficient and the transmission electron microscopy results, the rubber phases exhibited a special core‐shell structure, in which the cross‐linkedNBR‐core was encapsulated by the EPDM‐shell. The core‐shell structure effectively improved the interfacial compatibility between PP and NBR phase as the EPDM‐shell could avoid the direct contact of them, thus improving the mechanical properties of the TPVs. For example, the PP/EPDM/NBR (40/30/30) ternary TPV showed enhanced tensile strength of 12.57 MPa, compared with 10.71 MPa of PP/EPDM (40/60) TPV and 11.11 MPa of PP/NBR (40/60) TPV, respectively. Moreover, the oil resistance of the TPVs was also improved. Compared with PP/EPDM TPV, the change rates in mass, volume, tensile strength and elongation at break of PP/EPDM/NBR TPV after oil immersion decreased by 42.18%, 48.69%, 52.68% and 28.77%, respectively.     

Preparation of piperazine cyanurate by hydrogen‐bonding self‐assembly reaction and its application in intumescent flame‐retardant polypropylene composites

Piperazine cyanurate (PCA) is designed and synthesized via hydrogen‐bonding self‐assembly reactions between piperazine and cyanuric acid. Chemical structure and morphology of PCA are investigated by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The prepared PCA is combined with ammonium polyphosphate (APP) to prepare flame‐retardant polypropylene (PP) composites. Thermostability, flammability, and combustion characteristics of PP composites are analyzed. The maximum thermal decomposition rate of flame‐retarded PP composites has an apparent reduction compared with that of pure PP, and obvious char is left for this intumescent flame retardant (IFR) system of APP and PCA. A high limiting oxygen index value and UL‐94 V‐0 rating are achieved with addition of APP and PCA. In cone calorimetry test, heat and smoke releases of PP are significantly decreased by this IFR system. Gaseous decomposition products during the thermal decomposition of flame‐retardant composites are studied. Chemical structure and morphology of char residues are analyzed. The results illustrate that APP and PCA have a superb synergistic action in the aspect of improvement in fire safety of PP. A possible flame‐retardant mechanism is concluded to reveal the synergism between APP and PCA.