Bio‐based hyperbranched polyurethane/Fe3O4 nanocomposites as shape memory materials

The bio‐based shape memory polymers have generated immense interest as advanced smart materials. Mesua ferrea L. seed oil‐based hyperbranched polyurethane (HBPU)/Fe₃O₄ nanocomposites were prepared by the in‐situ polymerization technique. The transmission electron microscopy confirmed the homogeneous distribution of the Fe₃O₄ nanoparticles in polymer matrix, whereas Fourier transform infrared spectroscopic study revealed the presence of strong interfacial interactions between them. The incorporation of Fe₃O₄ (0 to 10 wt%) into the HBPU resulted in an increase in tensile strength (5.5–15 MPa) and scratch resistance (3–6 kg). The thermo‐gravimetric analysis indicated the improvement of thermal stability (240–270°C) of the nanocomposites. The nanocomposites exhibited full shape fixity, as well as almost full shape recovery under the microwave stimulus. The shape recovery speed increased with the increase of Fe₃O₄ nanoparticles content in the nanocomposites. Thus, the studied nanocomposites might be used as advanced shape memory materials in different potential fields. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation on Structures and Properties of Shape Memory Polyurethane/Silica Nanocomposites

In this study, high performance shape memory polyurethane (SMPU)/silica nanocomposites with different silica weight fraction including SMPU bulk, 3%, 4.5%, 6%, 7.5%, 10%, were prepared by sol‐gel process initiated by the solid acid catalyst of p‐toluenesulfonic acid (PTSA). Field emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) observation show that the silica nanoparticles are dispersed evenly in SMPU/silica nanocomposites. Tensile test and dynamic mechanical analysis (DMA) suggest that the mechanical properties and the glass transition temperature (T_g) of the nanocomposites were significantly influenced by silica weight fraction. Thermogravimetric analysis (TGA) was utilized to evaluate the thermal stability and determine the actual silica weight fraction. The TGA results indicate that the thermal stability can be enhanced with the hybridization of silica nanoparticles. Differential scanning calorimetry (DSC) was conducted to test the melting enthalpy (ΔH) and the results suggest that the ΔH was markedly improved for the SMPU/silica nanocomposites. Thermomechanical test was conducted to investigate the shape memory behavior and the results show that the shape fixity is improved by hybridization of silica and good shape recovery can be obtained with the increasing of cycle number for all the samples.     

Isothermal crystallization kinetics of polypropylene latex–based nanocomposites with organo‐modified clay

The effect of organo‐modified clay (Cloisite 93A) on the crystal structure and isothermal crystallization behavior of isotactic polypropylene (iPP) in iPP/clay nanocomposites prepared by latex technology was investigated by wide angle X‐ray diffraction, differential scanning calorimetry and polarized optical microscopy. The X‐ray diffraction results indicated that the higher clay loading promotes the formation of the β‐phase crystallites, as evidenced by the appearance of a new peak corresponding to the (300) reflection of β‐iPP. Analysis of the isothermal crystallization showed that the PP nanocomposite (1% C93A) exhibited higher crystallization rates than the neat PP. The unfilled iPP matrix and nanocomposites clearly shows double melting behavior; the shape of the melting transition progressively changes toward single melting with increasing crystallization temperature. The fold surface free energy (σ_e) of polymer chains in the nanocomposites was lower than that in the PP latex (PPL). It should be reasonable to treat C93A as a good nucleating agent for the crystallization of PPL, which plays a determinant effect on the reduction in σ_e during the isothermal crystallization of the nanocomposites. The activation energy, ΔE_a, decreased with the incorporation of clay nanoparticles into the matrix, which in turn indicates that the nucleation process is facilitated by the presence of clay. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1927–1938, 2010     

Carbon nanotube–polyurethane shape memory nanocomposites with low trigger temperature

Ester-based polyurethane (PU) with low glass transition temperature was used to develop shape memory nanocomposites with low trigger temperature. Pristine carbon nanotubes (CNTs) and oxidized CNTs (ox-CNTs) were introduced by melt mixing to improve the mechanical and shape memory properties of the PU matrix. The dispersion of CNTs on the mechanical properties and shape memory behaviors of the nanocomposites were also investigated. The results show that better dispersion of ox-CNTs contributes to more stiffness effect below glass transition temperature (T_g) while lower storage modulus (E′) above T_g. The nanocomposites exhibit high shape fixity and recovery ratio above 98%. The ox-CNT/PU nanocomposite shows higher shape recovery ratio for the first cycle, faster recovery due to better dispersion of CNTs and have potential applications for controlling tags or proof marks in the area of frozen food. The trigger temperature can be tailored by controlling the T_g of the PU matrix or the content of the nanofillers.     

Synthesis and characterization of poly(ɛ-caprolactone)/Fe3o4 nanocomposites by in situ polymerization

A series of magnetic nanocomposites based on poly(?-caprolactone) (PCL) and Fe₃O₄ nanoparticles were prepared using a facile in situ polymerization method. The chemical structures of the PCL/Fe₃O₄ nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy. Results of wide-angle X-ray diffraction (WAXD) showed that the incorporation of the Fe₃O₄ nanoparticles did not affect the crystallization structure of the PCL. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the morphology and dispersion of the Fe₃O₄ nanoparticles within the as-synthesized nanocomposites. Results of differential scanning calorimetry (DSC) and polarizing optical microscopy (POM) showed that the crystallization temperature was raised and the spherulites size decreased by the presence of Fe₃O₄ nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. The thermal stability of the PCL was depressed by incorporation of Fe₃O₄ nanoparticles from thermogravimetric analysis (TGA). The superparamagnetic behavior of the PCL/Fe₃O₄ nanocomposites was testified by the superconducting quantum interference device (SQUID) magnetometer analysis. The obtained biodegradable nanocomposites will have a great potential in magnetic resonance imaging contrast and targeted drug delivery.     

Structural characterization and high‐temperature compressive creep of PTFE‐based composites filled with inorganic nanoparticles

The PTFE‐based nanocomposites with various contents of inorganic nanoparticles (n‐AlN and n‐Si₃N₄) were prepared by cold compaction followed by free sintering. The results of scanning electron microscopy, differential scanning calorimetry, and X‐ray diffraction show that PTFE spherulite formed in the nanocomposites. When 2 wt% inorganic nanoparticles were added into the PTFE matrix, the crystallinity increased from 34.3% to 42.1% and 43.2%, respectively. Moreover, the interplanar distances for each crystal plane were enlarged and the grain sizes were smaller than that of pure PTFE. In addition, the mechanical and high‐temperature compressive creep properties were investigated. The results indicate that the introduction of inorganic nanoparticles largely increased the high‐temperature compressive creep resistance, and the maximal reduction of percentage of creep strain was up to 68%. The tensile strengths of the nanocomposites increased with increasing filler content when it was no more than 2%, and then decreased with the further increase of the filler content, whereas the elongations at break showed a reverse tendency. Copyright © 2011 John Wiley & Sons, Ltd.     

Curing Kinetics Modeling of Epoxy Modified by Fully Vulcanized Elastomer Nanoparticles Using Rheometry Method

In this study, the curing kinetics of epoxy nanocomposites containing ultra-fine full-vulcanized acrylonitrile butadiene rubber nanoparticles (UFNBRP) at different concentrations of 0, 0.5, 1 and 1.5 wt.% was investigated. In addition, the effect of curing temperatures was studied based on the rheological method under isothermal conditions. The epoxy resin/UFNBRP nanocomposites were characterized via Fourier transform infrared spectroscopy (FTIR). FTIR analysis exhibited the successful preparation of epoxy resin/UFNBRP, due to the existence of the UFNBRP characteristic peaks in the final product spectrum. The morphological structure of the epoxy resin/UFNBRP nanocomposites was investigated by both field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) studies. The FESEM and TEM studies showed UFNBRP had a spherical structure and was well dispersed in epoxy resin. The chemorheological analysis showed that due to the interactions between UFNBRP and epoxy resin, by increasing UFNBRP concentration at a constant temperature (65, 70 and 75 °C), the curing rate decreases at the gel point. Furthermore, both the curing kinetics modeling and chemorheological analysis demonstrated that the incorporation of 0.5% UFNBRP in epoxy resin matrix reduces the activation energy. The curing kinetic of epoxy resin/UFNBRP nanocomposite was best fitted with the Sestak–Berggren autocatalytic model.     

Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay

A series of epoxy resin nanocomposites modified by polyurethane and organically modified montmorillonite was prepared by effectively dispersing the organically modified montmorillonite in interpenetrating polymer networks (IPNs) of epoxy and polyurethane via the sequential polymeric technique and in situ polymerization. The tribological performance of the resultant EP/PU nanocomposites was investigated by a pin‐on‐disc tester, and the results showed that adding polyurethane and organically modified clay to the EP matrix had a synergistic effect on improving tribological performance of EP/PU nanocomposites. The morphologies of the worn surface were studied by scanning electron microscopy (SEM) observations, and the results indicated that the mechanism of improving tribological performance of EP/PU nanocomposites was different from that of pure EP or pure EP/PU IPNs. The thermal behavior of these nanocomposites was also investigated by thermogravimeric analysis (TGA), and the results indicated that adding organically modified clay to the matrix remedied the deterioration of the thermal degradation temperature of the interpenetrating networks. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of organophilic montmorillonite on hydrogen bonding, free volume and glass transition temperature of epoxy resin/polyurethane interpenetrating polymer networks

Epoxy resin nanocomposites containing organophilic montmorillonite (oM) and polyurethane were prepared by adding oM to interpenetrating polymer networks (IPNs) of epoxy resin and polyurethane (EP/PU). The dispersion degree of oM in EP/PU matrix was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Fourier transform infrared spectrometry (FT-IR) showed that strong interactions existed between oM and EP/PU matrix, and oM had some effect on hydrogen bonding of these EP/PU IPNs nanocomposites. Positron annihilation spectroscopy (PALS) and differential scanning calorimetry (DSC) measurements were used to investigate the effect of oM and PU contents on free volume and glass transition temperature (T_g) of these nanocomposites. The PALS and DSC results clearly showed that the presence of oM led to a decrease in the total fractional free volume, which was consistent with increasing T_g upon addition of oM, ascribed to increasing hydrogen bonding in interfacial regions of oM and EP/PU matrix and enhancing the miscibility between EP phase and PU phase. In addition, with increasing PU content, the total fractional free volume increased, corresponding to decreasing T_g.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

Effect of polyol structure on the properties of the resultant magnetic polyurethane elastomer nanocomposites

In this study, two types of magnetic polyurethane (PU) elastomer nanocomposites using polycaprolactone (PCL) and polytetramethylene glycol (PTMG) as polyols were synthesized by incorporating thiodiglycolic acid surface modified Fe₃O₄ nanoparticles (TSM‐Fe₃O₄) into PU matrices through in situ polymerization method. TSM‐Fe₃O₄ nanoparticles were prepared using in situ coprecipitation method in alkali media and were characterized by X‐ray diffraction, Fourier Transform Infrared Spectrophotometer, Transmission Electron Microscopy, and Vibrating Sample Magnetometer. The effects of PCL and PTMG polyols on the properties of the resultant PUs were studied. The morphology and dispersion of the nanoparticles in the magnetic nanocomposites were studied by Scanning Electron Microscope. It was observed that dispersion of nanoparticles in PTMG‐based magnetic nanocomposite was better than PCL‐based magnetic nanocomposite. Furthermore, the effect of polyol structure on thermal and mechanical properties of nanocomposite was investigated by Thermogravimetric Analysis and Dynamic Mechanical Thermal Analysis. A decrease in the thermal stability of magnetic nanocomposites was found compared to pure PUs. Furthermore, DMTA results showed that increase in glass transition temperature of PTMG‐based magnetic nanocomposite is higher than PCL‐based magnetic nanocomposite, which is attributed to better dispersion of TSM‐Fe₃O₄ nanoparticles in PTMG‐based PU matrix. Additionally, magnetic nanocomposites exhibited a lower level of hydrophilicity compared to pure PUs. These observations were attributed to the hydrophobic behavior of TSM‐Fe₃O₄ nanoparticles. Moreover, study of fibroblast cells interaction with magnetic nanocomposites showed that the products can be a good candidate for biomedical application. Copyright © 2013 John Wiley & Sons, Ltd.     

Soluble,Antibaterial, and Anticorrosion Studies of Sulfonated Polystyrene/Polyaniline/Silver Nanocomposites Prepared with the Sulfonated Polystyrene Template

In this work, multifunctional sulfonated polystyrene/polyaniline/silver (SPS /PANI /Ag) nanocomposites are prepared through using sulfonated polystyrene (SPS ) spheres as templates and utilizing polyvinylpyrrolidone (PVP ) as reducing agent and stabilizing agent. Our method is an environmentally friendly method because no toxic reagents are added during the preparation process. Fourier transform infrared spectrum (FTIR ), field emission scanning electron microscopy (FESEM ), and energy disperse spectroscopy (EDX ) results confirmed the formation of PS spheres, SPS spheres, SPS /PANI nanocomposites, and SPS /PANI /Ag nanocomposites. Powder X‐ray diffraction (XRD ) patterns indicate that the obtained Ag nanoparticles are crystalline. Solubilities measurements show that SPS /PANI /Ag nanocomposites have improved solubilities when compared to pure PANI in common organic solvents and deionized water. Antibacterial studies show that SPS /PANI /Ag nanocomposites can greatly inhibit the growth of Escherichia coli and Staphylococcus aureus . Anticorrosion studies show that the incorporation of SPS /PANI /Ag nanocomposites in waterborne alkyd resin can greatly promote the anticorrosive efficiency of waterborne alkyd resin.     

Synthesis,characterization, and properties of monodispersed magnetite coated multi‐walled carbon nanotube/polypyrrole nanocomposites synthesized by in‐situ chemical oxidative polymerization

This study describes the preparation of a nanocomposites fabricated from monodispersed 4‐nm iron oxide (Fe₃O₄) coated on the surface of carboxylic acid containing multi‐walled carbon nanotube (c‐MWCNT) and polypyrrole (PPy) by in situ chemical oxidative polymerization. High‐resolution transmission electron microscopy images and X‐ray diffraction (XRD) data indicate that the resulting Fe₃O₄ nanoparticles synthesized using the thermal decomposition are close to spherical dots with a particle size about 4 ± 0.2 nm. The resulting nanoparticles were further mixed with c‐MWCNT in an aqueous solution containing with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form one‐dimensional Fe₃O₄ coated c‐MWCNT template for further preparation of nanocomposite. Structural and morphological analysis using field‐emission scanning electron microscopy, high‐resolution transmission electron microscopy, and XRD showed that the fabricated Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are one‐dimensional core (Fe₃O₄ coated c‐MWCNT)‐shell (PPy) structures. The conductivities of these Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are about four times higher than those of pure PPy matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 727–733, 2008     

Thermal,mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Polymer blend nanocomposites based on thermoplastic polyurethane (PU) elastomer, polylactide (PLA) and surface modified carbon nanotubes were prepared via simple melt mixing process and investigated for its mechanical, dynamic mechanical and electroactive shape memory properties. Chemical and structural characterization of the polymer blend nanocomposites were investigated by Fourier Transform infrared (FT-IR) and wide angle X-ray diffraction (WAXD). Loading of the surface modified carbon nanotube in the PU/PLA polymer blends resulted in the significant improvement on the mechanical properties such as tensile strength, when compared to the pure and pristine CNT loaded polymer blends. Dynamic mechanical analysis showed that the glass transition temperature (T_g) of the PU/PLA blend slightly increases on loading of pristine CNT and this effect is more pronounced on loading surface modified CNTs. Thermal and electrical properties of the polymer blend composites increases significantly on loading pristine or surface modified CNTs. Finally, shape memory studies of the PU/PLA/modified CNT composites exhibit a remarkable recoverability of its shape at lower applied dc voltages, when compared to pure or pristine CNT loaded system.     

Effect of nanoclay and barium sulfate nanoparticles on the thermal and morphological properties of polyvinylidene fluoride nanocomposites

The thermal, morphological and optical studies of BaSO₄ and MMT (nanoclay) embedded in PVDF were investigated. Nanocomposites samples of PVDF–BaSO₄–MMT were prepared by varying the loadings (1–4 mass%) in case of BaSO₄ and MMT nanomaterials, respectively. Polyvinylidene fluoride–barium sulfate-montmorillonite (PVDF–BaSO₄–MMT) nanocomposites were prepared by solvent-mixing technique. Nanoparticles were synthesized by in situ deposition technique with the help of nonionic polymeric surfactant, and the particle size of nanoparticles was recognized by scanning electron microscopy (SEM) analysis which confirms that the particle has diameter of 80–90 nm. As prepared, nanocomposites films (thickness, 25 μm) were characterized by Fourier transform infrared microscopy (FTIR), SEM and electron diffraction spectroscopy (EDS). FTIR shows that all the chemical constituents were present in the nanocomposites, whereas SEM analysis suggested that the nanofillers dispersed well in polymer matrix and EDS showed the elemental composition of nanocomposite samples. Thermal properties of nanocomposites were studied by using TG/DTA/DTG. TG/DTA studies showed decomposition temperature of pure PVDF is 473.5 °C. The decomposition temperature (T _d) of nanocomposites was increased by 93 °C in case of nanocomposites with addition of both BaSO₄ and MMT nanomaterials. The difference in the thermal degradation temperature was found to be 1.2% higher in case of addition of BaSO₄ nanoparticle as compared to nanoclay. The obtained transparent nanocomposite films were characterized by using UV–Vis spectrophotometer which shows that transparencies of nanocomposites are maintained in visible region, the intensity of absorption band in UV region is increased with the addition of BaSO₄ nanoparticles, while in case of addition of nanoclay the UV region does not show drastic changes. Addition of both nanoparticle and nanoclay shows higher absorption in comparison with the individual samples. But further, doubling the amount of nanoparticle and nanoclay shows decrease in UV absorption. Overall, the results of thermal studies show that the incorporation of BaSO₄ and MMT could significantly improve the thermal properties of nanocomposites.     

超声引发无皂乳液聚合制备纳米银/PAAEM复合材料及其表征

在不使用气体保护及乳化剂的条件下,超声辐射引发无皂乳液聚合双原位合成纳米银/聚乙酰乙酸基甲基丙烯酸乙酯(PAAEM)复合材料。并通过XRD、FTIR、TEM、HRTEM、XPS和TG等分析方法对其进行表征。结果表明:纳米银粒子具有面心立方结构和球形或近球形形貌,且较均匀地分散在聚合物基体中;纳米银粒子与基体之间的相互作用是纳米银与基体中乙酰乙酸基的羰基氧原子配位所产生的;而且纳米银粒子对基体PAAEM的热学性能有很大影响。     

Experimental and modeling investigation of shape memory behavior of polyurethane/carbon nanotube nanocomposite

In the current study, mechanical, thermal, thermo‐mechanical, and shape memory behavior of polyurethane/carbon nanotube nanocomposites were investigated, and also a modified Halpin‐Tsai equation was used for the first time to model shape recovery stress of these smart composites. Results showed that strength enhanced with the addition of MWCNTs and improved to a maximum value of 130% for PU‐1wt%CNTs. SEM micrographs were also used to prove the presence of agglomerates at higher CNT contents. By investigating thermogravimetry curves, it was concluded that the incorporation of carbon nanotubes transferred thermal degradation to a higher temperature. Storage modulus improved for nanocomposite samples which showed the reinforcing effect of CNTs on polyurethane. Memory behavior showed that recovery stress was increased for PU‐CNTs samples to a maximum value of 100% and not any harmful effect on shape recoveries observed. Finally, modified Halpin‐Tsai equation was obtained with the correction factor of K = exp(−1.79‐152V_f).     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

Crystallization,mechanical, and fracture behaviors of spherical alumina‐filled polypropylene nanocomposites

The objectives of this paper are to study the crystallization behavior and fracture characteristics of spherical alumina (Al₂O₃) nanoparticle‐filled polypropylene (PP) composites. Nanocomposites containing 1.5–5.0 wt % of the Al₂O₃ nanoparticles (pretreated with silane coupling agent) were prepared for this investigation. Wide angle X‐ray diffraction (WAXD) results show that a small amount of β‐crystal of PP forms after adding the Al₂O₃ nanoparticles. According to differential scanning calorimetric (DSC) and optical microscopy (OM) measurements, the Al₂O₃ nanoparticles make PP spherulite size reduced and crystallization temperature of PP enhanced, by acting as effective nucleating agents. However, there are no obvious differences in the crystallinity for the virgin PP and the Al₂O₃/PP nanocomposites. Tensile test shows that both the Young's modulus and the yield strength of the Al₂O₃/PP nanocomposites increase with the particle content increasing, suggesting that the interfacial interaction between the nanoparticles and PP matrix is relatively strong. Under quasi‐static loading rate, the fracture toughness (K_IC) of the Al₂O₃/PP nanocomposites was found to be insensitive to nanoparticle content. Under impact loading rate, the Izod impact strength and the impact fracture toughness (G_c) indicate that the impact fracture toughness increases initially with the addition of 1.5 wt % of the Al₂O₃ nanofillers into the PP matrix. However, with the further addition of up to 3.0 and 5.0 wt % nanoparticles, both the Izod impact strength and impact G_c change very little. By observing the single‐edge‐double‐notch (SEDN) specimens with optical microscopy after four point bending (4PB) tests, it was found that numerous crazes and microcracks form around the subcritical crack tip, indicating that crazing and microcracking are the dominant fracture mechanisms. Scanning electron microscopy (SEM) observation confirms this result. In addition, when the strain rate of 4PB tests was increased, some wave‐like branches were formed along the fractured edge for the Al₂O₃/PP nanocomposites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3652–3664, 2005     

聚苯胺钡铁氧体纳米复合材料的制备、表征及性能

采用原位掺杂聚合法, 将聚苯胺(PANI)对粒径在60~80 nm的M型钡铁氧体颗粒(BaFe12O19)进行了包覆, 得到了具有棒状结构的复合材料. 通过X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等测试手段对材料的形貌和结构进行了表征. 结果表明, PANI链段与BaFe12O19颗粒之间存在作用力. 使用振动磁强计和四探针法测定了复合材料的磁性能与电性能后发现, 饱和磁化强度与矫顽力均随聚苯胺含量的增加呈规律性下降趋势, 而电导率呈上升趋势. 复合材料的吸收特性测试结果表明, 该材料反射率小于-20 dB时, 带宽可以达到15.07 GHz. 同时详细地讨论了纳米复合材料的聚合机理及相互作用.