Fe2O3/Mn2O3 nanoparticles: Preparations and applications in the photocatalytic degradation of phenol and parathion in water

In this study, nanoparticles of Fe₂O₃/Mn₂O₃ mixture were obtained using the sol–gel method. The synthesis uses the combination of polyvinyl alcohol (PVA) and tartaric acid (TA). Synthesized catalysts prove superior compared to those afforded from previous reports. To be specific, desired catalysts can be received at lower calcination temperature. Furthermore, their structures display higher uniformity in term of particle sizes. Finally, they show better performance for the photocatalytic degradation of model-persistent organic compounds.     

Preparation and Electrochemical Performance of Li[Ni1/3Co1/3Mn1/3]O2 Synthesized Using Li2CO3 as Template

Porous structure Li[Ni_1/3Co_1/3Mn_1/3]O₂ has been synthesized via a facile carbonate co‐precipitation method using Li₂CO₃ as template and lithium‐source. The physical and electrochemical properties of the materials were examined by many characterizations including TGA, XRD, SEM, EDS, TEM, BET, CV, EIS and galvanostatic charge‐discharge cycling. The results indicate that the as‐synthesized materials by this novel method own a well‐ordered layered structure α‐NaFeO₂ [space group: R‐3m(166)], porous morphology, and an average primary particle size of about 150 nm. The porous material exhibits larger specific surface area and delivers a high initial capacity of 169.9 mAh·g^?1 at 0.1 C (1 C=180 mA·g^?1) between 2.7 and 4.3 V, and 126.4, 115.7 mAh·g^?1 are still respectively reached at high rate of 10 C and 20 C. After 100 charge‐discharge cycles at 1 C, the capacity retention is 93.3%, indicating the excellent cycling stability.     

Ab initio and RRKM calculations for the reaction channels of O(1D) + CH3CHF2

Ab initio and Rice–Ramsperger–Kassel–Marcus theories are carried out to study the potential energy surface and the energy‐dependent rate constants and branching ratios of the products for O(¹D) + CH₃CHF₂ reaction. Optimized geometries and vibrational frequencies have been obtained by MP2/6‐311G(d,p) method. The main products of the title reaction are CH₃CFO + HF, CH₂CFOH + HF, and CH₃ + CF₂OH at lower collision energy; and CH₃ + CF₂OH, CH₃CF₂ + OH are the main products at higher collision energy. CHF₂ + CH₂OH are the main products in the whole range of collision energy. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

微孔树脂镶嵌超细α-Fe2O3催化剂的制备、表征及其在苯酚H2O2羟化制备苯二酚反应中的应用

用离子交换方法制备了α-Fe2O3／微孔树脂催化剂。XRD，TEM和Moessbauer谱测试结果表明，制得的α-Fe2O3粒子尺寸非常细小，其粒径至少在5nm以下，该催化剂在苯酚H2O2羟化制备苯二酚反应中表现出了良好的催化活性，在n(苯酚）／n(H2O2)=3条件下，苯酚的有效转化率可达到22．4％，产物中邻苯二酚和对苯二酚的物质的量比接近1.4:1，反应放大3000倍后羟化活性及产物的选择性基本不变，与化学沉淀法制得的纳米α-Fe2O3羟化活性比较认为，造成二者催化活性不同的主要原因是α-Fe2O3的粒径发生了变化。     

Effects of solvent,casting temperature,and guest/host stoichiometries on the properties of shape memory material based on partial α‐CD‐PEG inclusion complex

A series of supramolecular inclusion complex (IC) films were formed by threading α‐cyclodextrin (α‐CD) molecules over poly(ethylene glycol) (PEG), according to the designed ratio of α‐CD/PEG. Because of containing α‐CD‐PEG inclusion crystallites as physical crosslinks and uncovered PEG crystallites as “switch phase”, the resulting supramolecular α‐CD‐PEG partial ICs displayed a shape memory effect. The properties of the materials were investigated by ¹H‐NMR, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling measurement. It was found that the casting temperature, solvent, and the ratio of α‐CD‐PEG inclusion/PEG had great influence on the formation and properties of α‐CD‐PEG partial ICs. The modes of complexes on different conditions were proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 951–957, 2010     

A Mild Method for the Protection of Aldehydes as Dithioacetals and Dithiolanes Catalyzed by I2 Generated in Situ Using Fe(NO3)3.9H2O/NaI Under Heterogeneous Conditions

Structurally diverse aromatic aldehydes were thioacetalated in a clean and efficient reaction with ethane‐1, 2‐dithiol and thiophenol based on the use of I₂ generated in situ from Fe(NO₃)₃.9H₂O/NaI. The reaction occurs in good to high yield in dichloromethane at room temperature and the use of toxic and corrosive molecular iodine is avoided.     

Supramolecular Fe3O4@PEG/−diaza crown ether@Ni: a novel magnetically reusable nano catalyst for the clean synthesis of 2‐aryl‐2,3‐dihydroquinazolin‐4(1H)‐ones

Ni@diaza crown ether complex supported on magnetic nanoparticle was provided by grafting technique. The catalytic activity of Fe₃O₄@diaza crown ether@Ni was explored through one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and it was used as an efficient and recoverably constant nanocatalyst. FT‐IR, SEM, TEM, XRD, BET, ICP, EDS, and TGA techniques were employed to specify the nanocatalyst. This heterogeneous catalyst demonstrated acceptable recyclability and could be used again several times with no considerable loss of its catalytic activity.     

Dimerization of Dimethyl 2‐(Naphthalen‐1‐yl)cyclopropane‐1,1‐dicarboxylate in the Presence of GaCl3 to [3+2], [3+3], [3+4], and Spiroannulation Products

In the presence of a catalytic amount of GaCl₃, dimethyl 2‐(naphthalen‐1‐yl)cyclopropane‐1,1‐dicarboxylate 5 undergoes selective [3+2]‐annulation‐type dimerization to give a polysubstituted cyclopentane containing two naphthalenyl substituents in the vicinal position (Scheme 2). Treatment of the same cyclopropane with an equimolar amount of GaCl₃?THF results in dimerization with electrophilic attack on each of the benzene rings to give [3+3] and [3+4] annulation products. The latter represent a new type of dimerization of donor? acceptor cyclopropanes. Finally, under conditions of double catalysis with GaCl₃, 3,3,5,5‐tetrasubstituted 4,5‐dihydropyrazole, this cyclopropane‐dicarboxylate undergoes stereospecific dimerization as a result of electrophilic ipso‐attack to give a tetracyclic pentaleno[6a,1‐a]naphthalene derivative (Scheme 5). Possible reaction mechanisms are proposed.     

Review of recent advances in the preparation of organic polymer monoliths for liquid chromatography of large molecules

In recent years the use of monolithic polymers in separation science has greatly increased due to the advantages these materials present over particle-based stationary phases, such as their relative ease of preparation and good permeability. For these reasons, these materials present high potential as stationary phases for the separation and purification of large molecules such as proteins, peptides, nucleic acids and cells. An example of this is the wide range of commercial available polymer-based monolithic columns now present in the market.